SVSigne Vahur

Signe Vahur

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Signe Vahur has a total of 141 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Handheld laser-based pen-type sampling probe for the mass spectrometric analysis of cultural heritage materials

    by Signe Vahur, Anu Teearu, Martin Leissoo, Rynno Lohmus, Rady Jazmin Remigio, Alexey Treshchalov, Hilkka Hiiop

  • Open Access

    Laser Ablation APCI-HRMS Method for the Analysis of Cultural Heritage Materials

    by Anu Teearu, Martin Leissoo, Rynno Lohmus, Alexey Treshchalov, Tõiv Haljasorg, Victor Augusto Xavier da Silveira, Hilkka Hiiop, Signe Vahur

    Analyzing cultural heritage (CH) materials, particularly organic substances, is challenging due to their complex chemical composition. A key requirement in such analyses is the use of analytical techniques that cause minimal damage to the artifact while providing the maximum amount of chemical information about the materials. Chromatographic and mass spectrometric (MS) techniques give valuable information about components of the organic materials, but these typically require a microsample from the object, along with specific preparation and instrumental conditions. For CH artifacts, techniques that work directly on the surface, thereby causing minimal damage, are far more desirable. We have developed a 355 nm optical fiber-coupled laser ablation (LA) atmospheric pressure chemical ionization (APCI)-MS system that enables the analysis of organic material directly from the solid surface of the artifact under ambient conditions with minimal surface damage. In this study, we coupled LA with APCI-Fourier transform ion cyclotron resonance (FT-ICR)-MS. The main aim was to evaluate the effectiveness of the developed LA-APCI high-resolution (HR)MS system for the analysis of five handmade mock-up materials of different paint and varnish layers and one real-life sample. The results demonstrate the analytical potential of the LA-APCI-HRMS technique, as high-quality and identifiable mass spectra were obtained for most of the analyzed materials. In the future, the developed LA-APCI-HRMS technique could be applied not only to cultural heritage but also to other fields (e.g., forensics, material science, etc.).


  • Characterisation of laser-ablated craters of different painting materials and evaluation with modified LA-APCI-MS system

    by Signe Vahur, Anu Teearu, Rynno Lohmus, Martin Leissoo, Alexey Treshchalov, Janis Lungevics, Georg Arju, Hilkka Hiiop


  • Open Access

    Influence of mineral composition and firing temperature on the micro- and mesoporosity of replicate archaeological ceramics

    by Jan-Michael C. Cayme, Rasmus Palm, Peeter Somelar, Signe Vahur, Ivo Leito, Ester Oras

    The role of micro- and mesopores of archaeological ceramics in preserving ancient biomolecules is not well established. To understand the formation of these nano-sized pores in ceramics, reference pottery briquettes were made using two different clay types (illitic and kaolinitic clays), two different tempers (sand and chalk), and two different firing temperatures (600 and 800°C). The mineral content of the briquettes was determined by quantitative X-ray diffraction, and the micro- and mesopores were characterized with the N2 adsorption method. The Brunauer–Emmett–Teller method, the adsorbed volume near liquefaction, and application of non-local density functional theory (NLDFT) were used on the N2 adsorption data to determine specific surface areas, specific pore volumes, and pore-size distributions. Values of the micro- and mesoporosity parameters of most of the briquettes were approximately proportional to the initial clay content and unrelated to temper; the proportionality factors were much larger for illitic clay than for kaolinitic clay. When chalk-tempered briquettes were fired at the higher firing temperature of 800°C, the parameters were no longer proportional to the initial clay content; they decreased in most briquettes formed of illitic clay due to reaction of the clay with lime, and they increased in briquettes formed of kaolinitic clay due mostly to the porosity of unreacted lime. Micropore volumes in briquettes formed mostly of illitic clay were substantial: of the order of 5 mm3 g−1. The work presented here forms a basis for future studies to establish a plausible mechanism of organic residue absorption and preservation in ancient ceramics.


  • Open Access

    Microplastics and Associated Microorganisms in the Sea Sediment of the Sentina Regional Natural Reserve (Central Adriatic Sea, Italy)

    by Angela Piersanti, Anna-Rita Attili, Monika Mortimer, Signe Vahur, Francesco Alessandro Palermo, Paolo Cocci, Cristina Miceli

    (1) Background: The large dispersion of microplastics (MPs) in the marine environment has effects on the health of living organisms

  • Laser-based analytical techniques in cultural heritage science – Tutorial review

    by Signe Vahur, Alexey Treshchalov, Rynno Lohmus, Anu Teearu, Käthi Niman, Hilkka Hiiop, Jaak Kikas, Ivo Leito


  • A demineralized osteostracan fossil from the Silurian Kalana Lagerstätte of Estonia: revealing its internal anatomy and uncovering a unique type of fossilization

    by Oive Tinn, Liisa Lang, Tiiu Märss, Signe Vahur, Kalle Kirsimäe

    The anatomy of a dorsal head shield of an agnathan fossil Kalanaspis delectabilis, belonging to class Osteostraci from the Aeronian (early Silurian) Kalana Lagerstätte of Estonia was studied using the X-ray computer-tomography. Scanning exposed shallow superficial relief on the dorsal surface of the head shield, which unmasked the internal anatomy of the specimen. The Kalanaspis fossil displays a mosaic of morphological characters: the overall shape of the cephalothoracic head shield and the main structures, like lateral fields, are typical for the group, but instead of the open pineal foramen, common to most osteostracans, the organs in the pineal region are concealed by the shield. A combination of characters that are common to osteostracans, along with unique features known among other early vertebrates, refer to the position of K. delectabilis within the stem group of Osteostraci. The carbonaceous mode of preservation of the head shield of the Kalanaspis fossil, previously undocumented among vertebrate fossils, contradicts the conventional fossilization pattern and refers to an unusual taphonomic history. This anomalous type of preservation appears to be the key to unlock its fossilization history and the complex taphonomic conditions of the whole Kalana Lagerstätte. The main processes for the atypical fossilization of the specimen of K. delectabilis are most likely related to the microbially controlled dissolution of apatitic bone tissues and replacement with microbial biofilms, possibly by the invasion of collagenolytic bacteria.


  • Quantitative mineralogical analysis of clay-containing materials using ATR-FT-IR spectroscopy with PLS method

    by Signe Vahur, Lisett Kiudorv, Peeter Somelar, Jan-Michael Cayme, Mark Dennis Chico Retrato, Rady Jazmin Remigio, Varun Sharma, Ester Oras, Ivo Leito

    A universal method for quantitative analysis of clay components, in terms of mineral composition, using ATR-FT-IR spectroscopy (in the mid-IR and far-IR regions) combined with partial least squares (PLS) regression technique (ATR-FT-IR-PLS) is reported. For the PLS method development, altogether 222 samples covering natural clay sources and various archaeological/cultural heritage artefacts were used as calibration and validation standards. This is the largest calibration set used for creating an ATR-FT-IR-PLS method for clay minerals. The quantitative compositions of these standards containing combinations of altogether 29 minerals for the PLS method were determined using XRD analysis. The developed ATR-FT-IR with PLS method is quick and easy to use, and enables analysis of very small sample amounts (down to a few mg). This is very important when working with samples from archaeological and cultural heritage objects. The developed ATR-FT-IR-PLS method enables quantifying the contents of 7 main classes of minerals in different clays with a root mean square error of prediction (RMSEP) ranging from 0.9 to 5.1 g/100g. This means that in some cases, depending also on the content of the mineral in the sample, the accuracy is at a semiquantitative level. This quantitative method was successfully applied to 11 cultural heritage case-study samples. Graphical abstract


  • Classification of archaeological adhesives from Eastern Europe and Urals by ATR‐FT‐IR spectroscopy and chemometric analysis

    by Shidong Chen, Signe Vahur, Anu Teearu, Taisi Juus, Mikhail Zhilin, Svetlana Savchenko, Svetlana Oshibkina, Vitali Asheichyk, Aliaksandr Vashanau, Evgeniia Lychagina, et al.

    Attenuated total reflection‐Fourier transform‐infrared spectroscopy (ATR‐FT‐IR) analysis of 100 adhesive samples from different prehistoric composite artefacts, pottery, and amorphous lumps across Eastern Europe and Urals were conducted with the aim to establish a fast analytical screening method for adhesive assignment. The ATR‐FT‐IR analysis allowed the identification of major chemical components of the adhesive samples that were assigned to three main groups: birch bark tar without major additives, birch bark tar with additives, and minor/non‐birch bark tar samples. ATR‐FT‐IR spectra were further analyzed using principal component analysis (PCA)‐based discriminant analysis (DA) that allowed additional refinement of adhesive classifications. The ATR‐FT‐IR results and the DA classification were confirmed by analyzing a selection of samples with gas chromatography–mass spectrometry (GC–MS). Results demonstrate that ATR‐FT‐IR coupled with DA classification allows fast and reliable preliminary identification of the major components in archaeological adhesives and their further classification. As such it is a considerable and faster alternative to more laborious GC–MS analysis, especially in the case of very small samples.


  • Open Access

    Quantitative GC–MS Analysis of Artificially Aged Paints with Variable Pigment and Linseed Oil Ratios

    by Eliise Tammekivi, Signe Vahur, Martin Vilbaste, Ivo Leito

    In this study, quantitative gas chromatography–mass spectrometry (GC–MS) analysis was used to evaluate the influence of pigment concentration on the drying of oil paints. Seven sets of artificially aged self-made paints with different pigments (yellow ochre, red ochre, natural cinnabar, zinc white, Prussian blue, chrome oxide green, hematite + kaolinite) and linseed oil mixtures were analysed. In the pigment + linseed oil mixtures, linseed oil concentration varied in the range of 10 to 95 g/100 g. The results demonstrate that the commonly used palmitic acid to stearic acid ratio (P/S) to distinguish between drying oils varied in a vast range (from especially low 0.6 to a common 1.6) even though the paints contained the same linseed oil. Therefore, the P/S ratio is an unreliable parameter, and other criteria should be included for confirmation. The pigment concentration had a substantial effect on the values used to characterise the degree of drying (azelaic acid to palmitic acid ratio (A/P) and the relative content of dicarboxylic acids (∑D)). The absolute quantification showed that almost all oil paint mock-ups were influenced by pigment concentration. Therefore, pigment concentration needs to be considered as another factor when characterising oil-based paint samples based on the lipid profile.