Kola Poornodaya Venkata Krishna Varma
Research Subjects
Kola Poornodaya Venkata Krishna Varma has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Chaitanya Surya Chandra Nadimpalli
Raghu Engineering College, India
1 shared publication - Goda Sreenivasulu Reddy
Mahatma Gandhi Institute of Technology
1 shared publication - Guthikonda Kiran Kumar
Physik Institut der Universität Zürich
1 shared publication - K. Swapna
Department of Physics, Koneru Lakshmaiah Education foundation, Guntur, India
1 shared publication - Kunapuli Siva Satya Mohan1 shared publication
- Lankapalli Sathya Vara Prasad
Andhra University
1 shared publication
Latest Publications
- 29 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (6) , 2018
Effect of diamond-cut twisted tapes on thermal performance of double pipe heat exchangers: a numerical approach
Double-pipe heat exchangers are typically employed in a variety of applications, including refineries and waste heat recovery systems. They are generally used for light-duty applications. They have limitations for heavy-duty applications. Heat transfer must be intensified to overcome this problem. Twisted tapes with diamond cuts of different sizes are inserted into the heat exchanger tubes to improve heat transfer. This creates added areas that disrupt the flow and help increase turbulence, thus promoting better mixing of the fluid. The diamond-cut twisted inserts have a constant twist ratio of 3 and varying scale ratios of 25, 50, and 75. The outcomes suggest that the Nusselt number has increased by 81.43% and the friction factor has increased by a factor of 1.01 compared with a plain tube. The maximum thermal performance factor is found to be 1.3 for a scale ratio of 50. The diamond-cut twisted tapes produced strong swirls, periodic boundary layer disruption, and controlled flow separation and reattachment. These changes increased turbulence, thereby intensifying heat transfer. Generalized correlations were developed for the Nusselt numbers and friction factors.
- 29 July 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 12 (6) , 2018
Effect of diamond-cut twisted tapes on thermal performance of double pipe heat exchangers: a numerical approach
Double-pipe heat exchangers are typically employed in a variety of applications, including refineries and waste heat recovery systems. They are generally used for light-duty applications. They have limitations for heavy-duty applications. Heat transfer must be intensified to overcome this problem. Twisted tapes with diamond cuts of different sizes are inserted into the heat exchanger tubes to improve heat transfer. This creates added areas that disrupt the flow and help increase turbulence, thus promoting better mixing of the fluid. The diamond-cut twisted inserts have a constant twist ratio of 3 and varying scale ratios of 25, 50, and 75. The outcomes suggest that the Nusselt number has increased by 81.43% and the friction factor has increased by a factor of 1.01 compared with a plain tube. The maximum thermal performance factor is found to be 1.3 for a scale ratio of 50. The diamond-cut twisted tapes produced strong swirls, periodic boundary layer disruption, and controlled flow separation and reattachment. These changes increased turbulence, thereby intensifying heat transfer. Generalized correlations were developed for the Nusselt numbers and friction factors.
- 22 May 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
Biodiesel production from sea green algae using Moringa oleifera as heterogeneous catalyst - an approach to definitive screening design optimization technique
Rising concerns over petro-derived fossil fuel depletion and the release of toxic engine exhaust emissions reflect the serious impact of these issues on environmental pollution and their adverse effects on human health. These concerns have stimulated exploration of green, renewable sources of biodiesel feedstocks. Algae biodiesel is regarded as a viable, sustainable, environmentally friendly alternative to fossil fuels. In the current study, oil extraction and biodiesel production were conducted using sea-green algae grown naturally on rocks in marine waters. Primarily, the wet sea green algae were harvested for oil extraction and converted into biodiesel. Sea-green algal oil was extracted using a chemical solvent-extraction method, yielding 24.25%. Further, a novel moringa oleifera dried leaves were used as a heterogeneous catalyst, which were calcinated in an oven with hot air at a temperature of 300 – 600 oC. The obtained calcined Moringa oleifera was mixed and trans esterified. Thus, the biodiesel yield from sea-green algae oil was 94.99%. Furthermore, a definitive screening design was implemented in this study using MiniTab- 21 to maximize biodiesel yield. The design was attempted using a 3-factor, 2-level fractional factorial design from the design of experiments framework. From 18 no. of experimental runs, the sea green algae oil biodiesel yield achieved was 97.14 % at 59 oC reaction temperature, 9.5 wt. % catalyst concentration, and 12:1 molar ratio. The sea green algae oil biodiesel contained 72.28% saturated and 27.72% unsaturated fatty acids, as determined by gas chromatography. The key fuel properties of biodiesel from sea-green algae oil were tested and confirmed; the values were within standard limits. Correspondingly, the green catalyst reusability, evaluated across 5 experimental trials, resulted in biodiesel yields greater than 50% compared with other reference studies. The definitive screening design analysis reported that the predicted value of R2 is 97.52 % and Adj. R2 value is 96.99 % which closely matches the experimental values. Finally, the addition of the green catalyst Moringa oleifera led to a maximum biodiesel yield.Thus, experimental and predicted outputs indicate the potential for utilizing sea green algae oil biodiesel as a renewable fuel in existing diesel engines, serving as an alternative to fossil fuels.
- 22 May 2026
- Published by Yildiz Technical University in Journal of Thermal Engineering
Biodiesel production from sea green algae using Moringa oleifera as heterogeneous catalyst - an approach to definitive screening design optimization technique
Rising concerns over petro-derived fossil fuel depletion and the release of toxic engine exhaust emissions reflect the serious impact of these issues on environmental pollution and their adverse effects on human health. These concerns have stimulated exploration of green, renewable sources of biodiesel feedstocks. Algae biodiesel is regarded as a viable, sustainable, environmentally friendly alternative to fossil fuels. In the current study, oil extraction and biodiesel production were conducted using sea-green algae grown naturally on rocks in marine waters. Primarily, the wet sea green algae were harvested for oil extraction and converted into biodiesel. Sea-green algal oil was extracted using a chemical solvent-extraction method, yielding 24.25%. Further, a novel moringa oleifera dried leaves were used as a heterogeneous catalyst, which were calcinated in an oven with hot air at a temperature of 300 – 600 oC. The obtained calcined Moringa oleifera was mixed and trans esterified. Thus, the biodiesel yield from sea-green algae oil was 94.99%. Furthermore, a definitive screening design was implemented in this study using MiniTab- 21 to maximize biodiesel yield. The design was attempted using a 3-factor, 2-level fractional factorial design from the design of experiments framework. From 18 no. of experimental runs, the sea green algae oil biodiesel yield achieved was 97.14 % at 59 oC reaction temperature, 9.5 wt. % catalyst concentration, and 12:1 molar ratio. The sea green algae oil biodiesel contained 72.28% saturated and 27.72% unsaturated fatty acids, as determined by gas chromatography. The key fuel properties of biodiesel from sea-green algae oil were tested and confirmed; the values were within standard limits. Correspondingly, the green catalyst reusability, evaluated across 5 experimental trials, resulted in biodiesel yields greater than 50% compared with other reference studies. The definitive screening design analysis reported that the predicted value of R2 is 97.52 % and Adj. R2 value is 96.99 % which closely matches the experimental values. Finally, the addition of the green catalyst Moringa oleifera led to a maximum biodiesel yield.Thus, experimental and predicted outputs indicate the potential for utilizing sea green algae oil biodiesel as a renewable fuel in existing diesel engines, serving as an alternative to fossil fuels.
- 19 December 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems
Effects of cadmium doping on thermo-physical properties of ZnO nanoparticles and nanofluids for heat transfer applications
The most common method of improving the thermal performance of the conventional fluids is adding the solid particles to the base fluid. This even though increases the thermal conductivity, but in turn increases the viscosity and the risk of sedimentation. Hence alternative methods are required to enhance the thermal performance of the base fluids. One such promising method is doping. In this regard, in this work it is aimed to study the effects of cadmium doping ZnO nanoparticles, which were then analyzed using X-ray Diffraction (XRD), Energy Dispersive X-ray (EDX), and Scanning Electron Microscopy (SEM). Their elemental composition was determined using SEM. XRD was utilized to ascertain the average size of the crystallite. All particles were found to be spherical and the average particle size ranged from 17 to 20 nm. Their thermal features were determined for various temperatures (20°C–60°C) and concentrations (0.1%–0.3%). Outcomes depict that at the highest concentration of the doped ZnO NPs, the thermal conductivity (TC) of the cadmium doped ZnO NFs for the concentration of 0.05% has enhanced by 42% than the base fluid. The TC of the Cadmium doped NFs was also found to be 7% higher than the TC of pure ZnO NFs. Density and viscosity has showed an increasing trend with the rise in the loading of the nanoparticles(NPs) whereas the specific heat has decreased. Doped nanofluids outperformed the ZnO nanofluids in their properties.
- 19 December 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems
Effects of cadmium doping on thermo-physical properties of ZnO nanoparticles and nanofluids for heat transfer applications
The most common method of improving the thermal performance of the conventional fluids is adding the solid particles to the base fluid. This even though increases the thermal conductivity, but in turn increases the viscosity and the risk of sedimentation. Hence alternative methods are required to enhance the thermal performance of the base fluids. One such promising method is doping. In this regard, in this work it is aimed to study the effects of cadmium doping ZnO nanoparticles, which were then analyzed using X-ray Diffraction (XRD), Energy Dispersive X-ray (EDX), and Scanning Electron Microscopy (SEM). Their elemental composition was determined using SEM. XRD was utilized to ascertain the average size of the crystallite. All particles were found to be spherical and the average particle size ranged from 17 to 20 nm. Their thermal features were determined for various temperatures (20°C–60°C) and concentrations (0.1%–0.3%). Outcomes depict that at the highest concentration of the doped ZnO NPs, the thermal conductivity (TC) of the cadmium doped ZnO NFs for the concentration of 0.05% has enhanced by 42% than the base fluid. The TC of the Cadmium doped NFs was also found to be 7% higher than the TC of pure ZnO NFs. Density and viscosity has showed an increasing trend with the rise in the loading of the nanoparticles(NPs) whereas the specific heat has decreased. Doped nanofluids outperformed the ZnO nanofluids in their properties.
- 8 November 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems
Influence of MWCNT/ZnO hybrid nanofluids’ thermo-physical characteristics for heat transfer applications
Hybrid nanofluids (HNF’s) can perform as promising heat transfer fluids because of their enhanced thermo-physical characteristics. However, there are certain limitations of using them at higher concentrations. Moreover, lot of works on hybrid nanofluids focussed greatly on assessing thermal conductivity and viscosity. But the other parameters like specific heat and density also play an important role in heat transfer applications in addition to the volume concentration. Also, the effect of the combination of different nano particles on heat transfer is also a crucial area. Hence in this work, it is aimed to determine the thermo-physical characteristics of MWCNT/ZnO hybrid nanofluids (70:30) at varied loading and temperatures. Two step strategy was employed to prepare the (HNF’s) at distinct loadings varying in the range of 0.01%–0.05% and at a range of temperatures of 30°C–70°C with base fluid as water. The mixture’s ratios were 30:70 of MWCNT and ZnO, respectively. HNF’s exhibited an improved thermal conductivity in comparison to the original fluid, which was 80% more than the base fluid. With the rise in the temperature, the density, viscosity and specific heat all trended downward. There is an increase in the density and viscosity with the increase in the volume concentration of the hybrid nano particles. This work suggested that the MWCNT and ZnO hybrid nanofluids are better heat transfer fluids for enhancing the heat transfer and can emerge as efficient coolants for the applications of heat transfer.
- 8 November 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems
Influence of MWCNT/ZnO hybrid nanofluids’ thermo-physical characteristics for heat transfer applications
Hybrid nanofluids (HNF’s) can perform as promising heat transfer fluids because of their enhanced thermo-physical characteristics. However, there are certain limitations of using them at higher concentrations. Moreover, lot of works on hybrid nanofluids focussed greatly on assessing thermal conductivity and viscosity. But the other parameters like specific heat and density also play an important role in heat transfer applications in addition to the volume concentration. Also, the effect of the combination of different nano particles on heat transfer is also a crucial area. Hence in this work, it is aimed to determine the thermo-physical characteristics of MWCNT/ZnO hybrid nanofluids (70:30) at varied loading and temperatures. Two step strategy was employed to prepare the (HNF’s) at distinct loadings varying in the range of 0.01%–0.05% and at a range of temperatures of 30°C–70°C with base fluid as water. The mixture’s ratios were 30:70 of MWCNT and ZnO, respectively. HNF’s exhibited an improved thermal conductivity in comparison to the original fluid, which was 80% more than the base fluid. With the rise in the temperature, the density, viscosity and specific heat all trended downward. There is an increase in the density and viscosity with the increase in the volume concentration of the hybrid nano particles. This work suggested that the MWCNT and ZnO hybrid nanofluids are better heat transfer fluids for enhancing the heat transfer and can emerge as efficient coolants for the applications of heat transfer.
- 3 July 2023
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 28 (2) , 83-93
Thermophysical properties of TiO 2 /CuO hybrid nanofluids for heat transfer applications
- 3 July 2023
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 28 (2) , 83-93
Thermophysical properties of TiO 2 /CuO hybrid nanofluids for heat transfer applications
- Open Access
- 1 May 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 23 (3) , 193-201
Convective Heat Transfer in Heat Exchangers Using Nanofluids: A Review
Enhancing the Convective heat transfer in the carrier fluids, by augmenting the thermal conductivity in fluids, with nano particles is one of the passive techniques. Enhancement in the thermal conductivity in the carrier fluids can be achieved by suspending particles of nano-size into the base...
- 1 May 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 23 (3) , 193-201
Open AccessConvective Heat Transfer in Heat Exchangers Using Nanofluids: A Review
Enhancing the Convective heat transfer in the carrier fluids, by augmenting the thermal conductivity in fluids, with nano particles is one of the passive techniques. Enhancement in the thermal conductivity in the carrier fluids can be achieved by suspending particles of nano-size into the base...
- Open Access
- 1 March 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 23 (2) , 97-106
Artificial Neural Network Technique for Estimating the Thermo-Physical Properties of Water-Alumina Nanofluid
With its superior thermo-physical characteristics to the carrier fluid, nanofluid is the most impactful heat transfer fluid. Thermal conductivity, density, viscosity, specific heat, coefficient of volumetric expansion, and other thermo-physical parameters play an important part in the thermal...
- 1 March 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 23 (2) , 97-106
Open AccessArtificial Neural Network Technique for Estimating the Thermo-Physical Properties of Water-Alumina Nanofluid
With its superior thermo-physical characteristics to the carrier fluid, nanofluid is the most impactful heat transfer fluid. Thermal conductivity, density, viscosity, specific heat, coefficient of volumetric expansion, and other thermo-physical parameters play an important part in the thermal...
- Open Access
- 1 November 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 22 (6) , 61-68
Comparative Analysis of Effect of Wind Loads with Variation in Altitude and Angle of Inclination of Wind Direction on Solar Panels
- 1 November 2021
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 22 (6) , 61-68
Open AccessComparative Analysis of Effect of Wind Loads with Variation in Altitude and Angle of Inclination of Wind Direction on Solar Panels