Damjan Bujak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Damjan Bujak has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Dalibor Carević
Faculty of Civil Engineering, University of Zagreb, 10000 Zagreb, Croatia
16 shared publications - Goran Lončar
Faculty of Civil Engineering, University of Zagreb, 10000 Zagreb, Croatia
9 shared publications - Hanna Miličević
Faculty of Civil Engineering, University of Zagreb, 10000 Zagreb, Croatia
7 shared publications - Tonko Bogovac
Univ Zagreb, Fac Civil Engn, Zagreb, Croatia
5 shared publications - Ivana Bartolić
Zagreb Univ Appl Sci, Dept Civil Engn, Zagreb, Croatia
3 shared publications - Suzana Ilic
Lancaster Environment Centre, Lancaster University, UK
2 shared publications
Latest Publications
- Open Access
- 16 July 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (7) , 1355
Hindcasting Extreme Significant Wave Heights Under Fetch-Limited Conditions with Tree-Based Models
Accurately hindcasting waves in semi-enclosed, fetch-limited basins remains challenging for reanalysis models, which tend to underestimate storm peaks near the coast. We developed interpretable ML models for Rijeka Bay (northern Adriatic) using only wind observations from two land-based wind stations to predict buoy Hm0 measurements spanning 2009–2011 (testing) and 2019–2021 (training and validation). The tested tree-based models included Random Forest, XGBoost, and Explainable Boosting Machine. This study introduces a novel approach in the literature by employing weighted schemes and feature engineering to enhance the predictive performance of interpretable, low-complexity machine learning models in hindcasting waves. Representing wind direction as sine–cosine components generally reduced RMSE and BIAS relative to traditional speed–direction inputs, while an exponential sample weight scheme that emphasized storm waves halved extreme Hm0 underprediction without inflating overall RMSE. The best-performing model, a Random Forest model, achieved an RMSE of 0.096 m and a correlation of 0.855 on the unseen test set—30% lower overall RMSE and 50% lower extreme wave RMSE than the MEDSEA and COEXMED hindcasts. Additionally, the underprediction was reduced by 90% compared to these reanalysis models. The method offers a computationally lightweight, transferable supplement to numerical wave guidance for coastal engineering and harbor operations.
- 16 July 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (7) , 1355
Open AccessHindcasting Extreme Significant Wave Heights Under Fetch-Limited Conditions with Tree-Based Models
Accurately hindcasting waves in semi-enclosed, fetch-limited basins remains challenging for reanalysis models, which tend to underestimate storm peaks near the coast. We developed interpretable ML models for Rijeka Bay (northern Adriatic) using only wind observations from two land-based wind stations to predict buoy Hm0 measurements spanning 2009–2011 (testing) and 2019–2021 (training and validation). The tested tree-based models included Random Forest, XGBoost, and Explainable Boosting Machine. This study introduces a novel approach in the literature by employing weighted schemes and feature engineering to enhance the predictive performance of interpretable, low-complexity machine learning models in hindcasting waves. Representing wind direction as sine–cosine components generally reduced RMSE and BIAS relative to traditional speed–direction inputs, while an exponential sample weight scheme that emphasized storm waves halved extreme Hm0 underprediction without inflating overall RMSE. The best-performing model, a Random Forest model, achieved an RMSE of 0.096 m and a correlation of 0.855 on the unseen test set—30% lower overall RMSE and 50% lower extreme wave RMSE than the MEDSEA and COEXMED hindcasts. Additionally, the underprediction was reduced by 90% compared to these reanalysis models. The method offers a computationally lightweight, transferable supplement to numerical wave guidance for coastal engineering and harbor operations.
- Open Access
- 1 July 2025
- Published by University of Rijeka, Faculty of Civil Engineering
Kalibracija parametara transporta sedimenta u numeričkom modelu XBeach-G na umjetnoj šljunčanoj plaži Ploče
Umjetne šljunčane plaže na hrvatskoj obali Jadrana koriste se za rekreaciju i zaštitu, ali su podložne stalnim morfološkim promjenama uslijed djelovanja valova i olujnih udara. Numeričko modeliranje ovih procesa zahtijeva preciznu kalibraciju parametara transporta sedimenta. Ova studija fokusira se na kalibraciju koeficijenta inercije (ci), kuta sipanja (∅ ) i koeficijenta transporta (γ) u numeričkom modelu XBeach-Gravel kako bi se poboljšala njegova točnost u uvjetima karakterističnim za Jadransko more. Kalibracija modela se temelji na terenskim mjerenjima pomoću fotogrametrije i bespilotnih letjelica, koji omogućuju visoko rezolucijsko praćenje morfodinamičkih promjena. Podešavanjem navedenih parametara, XBeach-G model, izvorno razvijen za visokoenergetske valove, prilagođen je za bolju simulaciju procesa formiranja bermi i izdizanja grebena, karakterističnih za šljunčane plaže na Jadranu. Rezultati istraživanja povećavaju pouzdanost modela u predviđanju dinamike transporta sedimenta i služe za poboljšanje strategije održavanja umjetnih šljunčanih plaža u Hrvatskoj.
- 1 July 2025
- Published by University of Rijeka, Faculty of Civil Engineering
Open AccessKalibracija parametara transporta sedimenta u numeričkom modelu XBeach-G na umjetnoj šljunčanoj plaži Ploče
Umjetne šljunčane plaže na hrvatskoj obali Jadrana koriste se za rekreaciju i zaštitu, ali su podložne stalnim morfološkim promjenama uslijed djelovanja valova i olujnih udara. Numeričko modeliranje ovih procesa zahtijeva preciznu kalibraciju parametara transporta sedimenta. Ova studija fokusira se na kalibraciju koeficijenta inercije (ci), kuta sipanja (∅ ) i koeficijenta transporta (γ) u numeričkom modelu XBeach-Gravel kako bi se poboljšala njegova točnost u uvjetima karakterističnim za Jadransko more. Kalibracija modela se temelji na terenskim mjerenjima pomoću fotogrametrije i bespilotnih letjelica, koji omogućuju visoko rezolucijsko praćenje morfodinamičkih promjena. Podešavanjem navedenih parametara, XBeach-G model, izvorno razvijen za visokoenergetske valove, prilagođen je za bolju simulaciju procesa formiranja bermi i izdizanja grebena, karakterističnih za šljunčane plaže na Jadranu. Rezultati istraživanja povećavaju pouzdanost modela u predviđanju dinamike transporta sedimenta i služe za poboljšanje strategije održavanja umjetnih šljunčanih plaža u Hrvatskoj.
- Open Access
- 30 June 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (7) , 1285
Overtopping over Vertical Walls with Storm Walls on Steep Foreshores
As sea levels rise and extreme weather events become more frequent due to climate change, coastal urban areas are increasingly vulnerable to wave overtopping and flooding. Retrofitting existing vertical seawalls with retreated storm walls represents a key adaptive strategy, especially in the Mediterranean, where steep foreshores and limited public space constrain conventional coastal defenses. This study investigates the effectiveness of storm walls in reducing wave overtopping on vertical walls with steep foreshores (1:7 to 1:10) through high-fidelity numerical simulations using the SWASH model. A comprehensive parametric study, involving 450 test cases, was conducted using Latin Hypercube Sampling to explore the influence of geometric and hydrodynamic variables on overtopping rate. Model validation against Eurotop/CLASH physical data demonstrated strong agreement (r = 0.96), confirming the reliability of SWASH for such applications. Key findings indicate that longer promenades (Gc) and reduced impulsiveness of the wave conditions reduce overtopping. A new empirical reduction factor, calibrated for integration into the Eurotop overtopping equation for plain vertical walls, is proposed based on dimensionless promenade width and water depth. The modified empirical model shows strong predictive performance (r = 0.94) against SWASH-calculated overtopping rates. This work highlights the practical value of integrating storm walls into urban seawall design and offers engineers a validated tool for enhancing coastal resilience. Future research should extend the framework to other superstructure adaptations, such as parapets or stilling basins, to further improve flood protection in the face of climate change.
- 30 June 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (7) , 1285
Open AccessOvertopping over Vertical Walls with Storm Walls on Steep Foreshores
As sea levels rise and extreme weather events become more frequent due to climate change, coastal urban areas are increasingly vulnerable to wave overtopping and flooding. Retrofitting existing vertical seawalls with retreated storm walls represents a key adaptive strategy, especially in the Mediterranean, where steep foreshores and limited public space constrain conventional coastal defenses. This study investigates the effectiveness of storm walls in reducing wave overtopping on vertical walls with steep foreshores (1:7 to 1:10) through high-fidelity numerical simulations using the SWASH model. A comprehensive parametric study, involving 450 test cases, was conducted using Latin Hypercube Sampling to explore the influence of geometric and hydrodynamic variables on overtopping rate. Model validation against Eurotop/CLASH physical data demonstrated strong agreement (r = 0.96), confirming the reliability of SWASH for such applications. Key findings indicate that longer promenades (Gc) and reduced impulsiveness of the wave conditions reduce overtopping. A new empirical reduction factor, calibrated for integration into the Eurotop overtopping equation for plain vertical walls, is proposed based on dimensionless promenade width and water depth. The modified empirical model shows strong predictive performance (r = 0.94) against SWASH-calculated overtopping rates. This work highlights the practical value of integrating storm walls into urban seawall design and offers engineers a validated tool for enhancing coastal resilience. Future research should extend the framework to other superstructure adaptations, such as parapets or stilling basins, to further improve flood protection in the face of climate change.
- Open Access
- 22 June 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (7) , 1209
Storm-Induced Evolution on an Artificial Pocket Gravel Beach: A Numerical Study with XBeach-Gravel
Coarse-grained beaches consisting of gravel, pebbles, and cobbles play a crucial role in coastal protection. On the Croatian Adriatic coast, there are artificial gravel pocket beaches created for recreational and protective purposes. However, these beaches are subject to constant morphological changes due to natural forces and human intervention. This study investigates the morphodynamics of artificial gravel pocket beaches, focusing on berm formation and crest build-up processes characteristic for low to moderate wave conditions. Despite mimicking natural formations, artificial beaches require regular maintenance due to sediment shifts dominantly caused by wave action and storm surges. Structure-from-Motion (SfM) photogrammetry and UAV-based surveys were used to monitor morphological changes on the artificial gravel pocket beach Ploče (City of Rijeka). The XBeach-Gravel model, originally adapted to simulate the effects of high-energy waves, was calibrated and validated to analyze low to moderate wave dynamics on gravel pocket beaches. The calibration includes adjustments to the inertia coefficient (ci), which influences sediment transport by shear stress at the bottom; the angle of repose (ϕ), which controls avalanching and influences sediment transport on sloping beds; and the bedload transport calibration coefficient (γ), which scales the transport rates linearly. By calibrating XBeach-G for low to moderate wave conditions, this research improves the accuracy of the model for the cases of morphological responses “berm formation” and “crest build-up”.
- 22 June 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (7) , 1209
Open AccessStorm-Induced Evolution on an Artificial Pocket Gravel Beach: A Numerical Study with XBeach-Gravel
Coarse-grained beaches consisting of gravel, pebbles, and cobbles play a crucial role in coastal protection. On the Croatian Adriatic coast, there are artificial gravel pocket beaches created for recreational and protective purposes. However, these beaches are subject to constant morphological changes due to natural forces and human intervention. This study investigates the morphodynamics of artificial gravel pocket beaches, focusing on berm formation and crest build-up processes characteristic for low to moderate wave conditions. Despite mimicking natural formations, artificial beaches require regular maintenance due to sediment shifts dominantly caused by wave action and storm surges. Structure-from-Motion (SfM) photogrammetry and UAV-based surveys were used to monitor morphological changes on the artificial gravel pocket beach Ploče (City of Rijeka). The XBeach-Gravel model, originally adapted to simulate the effects of high-energy waves, was calibrated and validated to analyze low to moderate wave dynamics on gravel pocket beaches. The calibration includes adjustments to the inertia coefficient (ci), which influences sediment transport by shear stress at the bottom; the angle of repose (ϕ), which controls avalanching and influences sediment transport on sloping beds; and the bedload transport calibration coefficient (γ), which scales the transport rates linearly. By calibrating XBeach-G for low to moderate wave conditions, this research improves the accuracy of the model for the cases of morphological responses “berm formation” and “crest build-up”.
- Open Access
- 11 June 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (6) , 144
A Probabilistic Design Framework for Semi-Submerged Curtain Wall Breakwaters
Semi-submerged curtain breakwaters are increasingly favored to protect marinas and other microtidal basins, yet they are still almost exclusively designed with deterministic wave transmission equations. This study introduces a fully probabilistic design framework that translates uncertainty in wave climate and water level design parameters into explicit confidence limits for transmitted wave height. Using Latin Hypercube Sampling, input uncertainty is propagated through a modified Wiegel transmission model, yielding empirical distributions of the transmission coefficients Kt and Ht. Our method uses the associated safety factor required to satisfy a 95% non-exceedance criterion, SF95. Regression analysis reveals the existence of a strong inverse linear relationship (R = −0.9) between deterministic Kt and the probabilistic safety factor, indicating that designs trimmed to low nominal transmission (e.g., Kt ≤ 0.35) must be uprated by up to 55% once parameter uncertainty is acknowledged, whereas concepts with greater transmission require far smaller margins. Sobol indices show that uncertainty in Hm0 and Tp each contribute ≈40% of the variance in Ht for a tide signal standard deviation of ση = 0.16 m, while tides only become equally important when ση > 0.30 m. Model-based uncertainty is negligible, standing at under 8%. The resulting lookup equations allow designers to convert any deterministic Kt target into a site-specific probabilistic limit with a single step, thereby embedding reliability into routine breakwater sizing and reducing the risk of underdesigned marina and port structures.
- 11 June 2025
- Published by MDPI AG in Infrastructures
- Vol. 10 (6) , 144
Open AccessA Probabilistic Design Framework for Semi-Submerged Curtain Wall Breakwaters
Semi-submerged curtain breakwaters are increasingly favored to protect marinas and other microtidal basins, yet they are still almost exclusively designed with deterministic wave transmission equations. This study introduces a fully probabilistic design framework that translates uncertainty in wave climate and water level design parameters into explicit confidence limits for transmitted wave height. Using Latin Hypercube Sampling, input uncertainty is propagated through a modified Wiegel transmission model, yielding empirical distributions of the transmission coefficients Kt and Ht. Our method uses the associated safety factor required to satisfy a 95% non-exceedance criterion, SF95. Regression analysis reveals the existence of a strong inverse linear relationship (R = −0.9) between deterministic Kt and the probabilistic safety factor, indicating that designs trimmed to low nominal transmission (e.g., Kt ≤ 0.35) must be uprated by up to 55% once parameter uncertainty is acknowledged, whereas concepts with greater transmission require far smaller margins. Sobol indices show that uncertainty in Hm0 and Tp each contribute ≈40% of the variance in Ht for a tide signal standard deviation of ση = 0.16 m, while tides only become equally important when ση > 0.30 m. Model-based uncertainty is negligible, standing at under 8%. The resulting lookup equations allow designers to convert any deterministic Kt target into a site-specific probabilistic limit with a single step, thereby embedding reliability into routine breakwater sizing and reducing the risk of underdesigned marina and port structures.
- 1 May 2023
- Published by University of Dubrovnik in Naše more
- Vol. 70 (2) , 103-114
Hindcast of Significant Wave Heights in Sheltered Basins Using Machine Learning and the Copernicus Database
Damjan Bujak, Dalibor Carević, Tonko Bogovac, Tin Kulić ; Original scientific paper, pp. 103-114 Download
- 1 May 2023
- Published by University of Dubrovnik in Naše more
- Vol. 70 (2) , 103-114
Hindcast of Significant Wave Heights in Sheltered Basins Using Machine Learning and the Copernicus Database
Damjan Bujak, Dalibor Carević, Tonko Bogovac, Tin Kulić ; Original scientific paper, pp. 103-114 Download
- Open Access
- 1 May 2023
- Published by Croatian Association of Civil Engineers in Journal of the Croatian Association of Civil Engineers
- Vol. 75 (04) , 355-365
Analysis of beach nourishment and construction in Croatia
- 1 May 2023
- Published by Croatian Association of Civil Engineers in Journal of the Croatian Association of Civil Engineers
- Vol. 75 (04) , 355-365
Open AccessAnalysis of beach nourishment and construction in Croatia
- Open Access
Filling Missing and Extending Significant Wave Height Measurements Using Neural Networks and an Integrated Surface Database
Wave data play a critical role in offshore structure design and coastal vulnerability studies. For various reasons, such as equipment malfunctions, wave data are often incomplete. Despite the interest in completing the data, few studies have considered constructing a machine learning model with publicly available wind measurements as input, while wind data from reanalysis models are commonly used. In this work, ANNs are constructed and tested to fill in missing wave data and extend the original wave measurements in a basin with limited fetch where wind waves dominate. Input features for the ANN are obtained from the publicly available Integrated Surface Database (ISD) maintained by NOAA. The accuracy of the ANNs is also compared to a state-of-the-art reanalysis wave model, MEDSEA, maintained at Copernicus Marine Service. The results of this study show that ANNs can accurately fill in missing wave data and also extend beyond the measurement period, using the wind velocity magnitude and wind direction from nearby weather stations. The MEDSEA reanalysis data showed greater scatter compared to the reconstructed significant wave heights from ANN. Specifically, MEDSEA showed a 22% higher HH index for expanding wave data and a 33% higher HH index for filling in missing wave data points.
Open AccessFilling Missing and Extending Significant Wave Height Measurements Using Neural Networks and an Integrated Surface Database
Wave data play a critical role in offshore structure design and coastal vulnerability studies. For various reasons, such as equipment malfunctions, wave data are often incomplete. Despite the interest in completing the data, few studies have considered constructing a machine learning model with publicly available wind measurements as input, while wind data from reanalysis models are commonly used. In this work, ANNs are constructed and tested to fill in missing wave data and extend the original wave measurements in a basin with limited fetch where wind waves dominate. Input features for the ANN are obtained from the publicly available Integrated Surface Database (ISD) maintained by NOAA. The accuracy of the ANNs is also compared to a state-of-the-art reanalysis wave model, MEDSEA, maintained at Copernicus Marine Service. The results of this study show that ANNs can accurately fill in missing wave data and also extend beyond the measurement period, using the wind velocity magnitude and wind direction from nearby weather stations. The MEDSEA reanalysis data showed greater scatter compared to the reconstructed significant wave heights from ANN. Specifically, MEDSEA showed a 22% higher HH index for expanding wave data and a 33% higher HH index for filling in missing wave data points.
- Open Access
- 22 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 680
Application of the XBeach-Gravel Model for the Case of East Adriatic Sea-Wave Conditions
Croatia’s coast located on the eastern Adriatic is rich with small gravel beaches with limited fetch. This leads to a specific low-energetic wave climate compared to most other beaches, while their gravel composition makes them unique. Most management of these beaches is performed without understanding the sediment transport occurring on the beaches. XBeach-Gravel is a numerical model capable of simulating bed-level change on gravel beaches, but lacks validation in the case of low significant wave height (under 2.5 m) and low peak periods (under 6 s), conditions that are present on the eastern Adriatic. Based on measurements performed in both laboratory conditions in a water canal in Hannover and actual storm wave conditions on Ploče beach, calibration of the model is performed. Model results are compared between laboratory conditions and field conditions for comparable wave conditions. XBeach-Gravel can simulate low-energetic events resulting in berm formation and berm buildup with a high Brier skill score if calibrated. Simulation of laboratory conditions requires high transport coefficient values and shows more sediment transport than similar wave conditions in the field. Calibration for field conditions is dependent on geodetic survey data capable of isolating wave events with dominant cross-shore transport, but once calibrated, XBeach-Gravel can achieve good to excellent Brier skill score values in simulating sediment change in low-energetic wave conditions on the eastern Adriatic.
- 22 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 680
Open AccessApplication of the XBeach-Gravel Model for the Case of East Adriatic Sea-Wave Conditions
Croatia’s coast located on the eastern Adriatic is rich with small gravel beaches with limited fetch. This leads to a specific low-energetic wave climate compared to most other beaches, while their gravel composition makes them unique. Most management of these beaches is performed without understanding the sediment transport occurring on the beaches. XBeach-Gravel is a numerical model capable of simulating bed-level change on gravel beaches, but lacks validation in the case of low significant wave height (under 2.5 m) and low peak periods (under 6 s), conditions that are present on the eastern Adriatic. Based on measurements performed in both laboratory conditions in a water canal in Hannover and actual storm wave conditions on Ploče beach, calibration of the model is performed. Model results are compared between laboratory conditions and field conditions for comparable wave conditions. XBeach-Gravel can simulate low-energetic events resulting in berm formation and berm buildup with a high Brier skill score if calibrated. Simulation of laboratory conditions requires high transport coefficient values and shows more sediment transport than similar wave conditions in the field. Calibration for field conditions is dependent on geodetic survey data capable of isolating wave events with dominant cross-shore transport, but once calibrated, XBeach-Gravel can achieve good to excellent Brier skill score values in simulating sediment change in low-energetic wave conditions on the eastern Adriatic.
- Open Access
- 14 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 614
Wave Runup Prediction and Alongshore Variability on a Pocket Gravel Beach under Fetch-Limited Wave Conditions
Most empirical equations used for wave runup predictions have been developed from measurements at straight sandy beaches in unlimited fetch environments. While there are empirical equations to predict wave runup on gravel beaches, they have not been tested for prediction of wave runup on pocket gravel beaches, in limited-fetch environment, which can be found around Mediterranean. This paper addresses this lack of measurements on this type of beaches and examines the alongshore variability of wave runup. Wave runup measurements were made using video observations along 3 cross-sectional profiles on the pocket beach of Ploče, Croatia. The measurements have shown that the wave runup can vary for about 71% even around the centerline of the pocket beach. This variability is due to beach orientation and alignment of beach profiles to the prevailing wave direction, as well as difference in beach slope. Comparison of wave runup predictions from five well-known empirical equations and field measurements showed significant underprediction (up to NBIAS = −0.33) for energetic wave events, and overall high scatter (up to NRMSE = 0.38). The best performing wave runup equation was used for further refinement outside the original parameter space by including the Goda wave peakedness parameter (Qp). The newly developed empirical equation for wave runup reduced the NBIAS to 0 and the NRMSE by 31% compared to the original equation (developed equation metrics: R = 0.91, NBIAS = 0, NRMSE = 0.2, HH = 0.2 on the study site). This empirical equation can potentially be used for design of coastal structures and artificial beaches in similar environments, but further measurements are needed to test its applicability to a range of forcing and environmental conditions.
- 14 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 614
Open AccessWave Runup Prediction and Alongshore Variability on a Pocket Gravel Beach under Fetch-Limited Wave Conditions
Most empirical equations used for wave runup predictions have been developed from measurements at straight sandy beaches in unlimited fetch environments. While there are empirical equations to predict wave runup on gravel beaches, they have not been tested for prediction of wave runup on pocket gravel beaches, in limited-fetch environment, which can be found around Mediterranean. This paper addresses this lack of measurements on this type of beaches and examines the alongshore variability of wave runup. Wave runup measurements were made using video observations along 3 cross-sectional profiles on the pocket beach of Ploče, Croatia. The measurements have shown that the wave runup can vary for about 71% even around the centerline of the pocket beach. This variability is due to beach orientation and alignment of beach profiles to the prevailing wave direction, as well as difference in beach slope. Comparison of wave runup predictions from five well-known empirical equations and field measurements showed significant underprediction (up to NBIAS = −0.33) for energetic wave events, and overall high scatter (up to NRMSE = 0.38). The best performing wave runup equation was used for further refinement outside the original parameter space by including the Goda wave peakedness parameter (Qp). The newly developed empirical equation for wave runup reduced the NBIAS to 0 and the NRMSE by 31% compared to the original equation (developed equation metrics: R = 0.91, NBIAS = 0, NRMSE = 0.2, HH = 0.2 on the study site). This empirical equation can potentially be used for design of coastal structures and artificial beaches in similar environments, but further measurements are needed to test its applicability to a range of forcing and environmental conditions.