Johannes Tümmler
Johannes Tümmler has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
P. V. Nickles
Max Born Institute
2 shared publications- A. Erko
Institute of Applied Photonics e.V., Rudower Chaussee 29/31, 12489 Berlin, Germany
1 shared publication - Adrian Jonas
Berlin Laboratory for innovative X-ray technologies (BLiX), D-10623 Berlin, Germany
1 shared publication - Denny Sommer
Max-Born-Institut für Nichtlineare Optik und Kurzzeitspektroskopie, D-12489 Berlin, Germany
1 shared publication - Gerd Priebe
Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy 1 , 12489 Berlin, Germany
1 shared publication H. Stiel
Max Born Institute
1 shared publication
Latest Publications
- Open Access
- 15 December 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (24) , 13463
Towards Understanding Excited-State Properties of Organic Molecules Using Time-Resolved Soft X-ray Absorption Spectroscopy
The extension of the pump-probe approach known from UV/VIS spectroscopy to very short wavelengths together with advanced simulation techniques allows a detailed analysis of excited-state dynamics in organic molecules or biomolecular structures on a nanosecond to femtosecond time level. Optical pump soft X-ray probe spectroscopy is a relatively new approach to detect and characterize optically dark states in organic molecules, exciton dynamics or transient ligand-to-metal charge transfer states. In this paper, we describe two experimental setups for transient soft X-ray absorption spectroscopy based on an LPP emitting picosecond and sub-nanosecond soft X-ray pulses in the photon energy range between 50 and 1500 eV. We apply these setups for near-edge X-ray absorption fine structure (NEXAFS) investigations of thin films of a metal-free porphyrin, an aggregate forming carbocyanine and a nickel oxide molecule. NEXAFS investigations have been carried out at the carbon, nitrogen and oxygen K-edge as well as on the Ni L-edge. From time-resolved NEXAFS carbon, K-edge measurements of the metal-free porphyrin first insights into a long-lived trap state are gained. Our findings are discussed and compared with density functional theory calculations.
- 15 December 2021
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 22 (24) , 13463
Open AccessTowards Understanding Excited-State Properties of Organic Molecules Using Time-Resolved Soft X-ray Absorption Spectroscopy
The extension of the pump-probe approach known from UV/VIS spectroscopy to very short wavelengths together with advanced simulation techniques allows a detailed analysis of excited-state dynamics in organic molecules or biomolecular structures on a nanosecond to femtosecond time level. Optical pump soft X-ray probe spectroscopy is a relatively new approach to detect and characterize optically dark states in organic molecules, exciton dynamics or transient ligand-to-metal charge transfer states. In this paper, we describe two experimental setups for transient soft X-ray absorption spectroscopy based on an LPP emitting picosecond and sub-nanosecond soft X-ray pulses in the photon energy range between 50 and 1500 eV. We apply these setups for near-edge X-ray absorption fine structure (NEXAFS) investigations of thin films of a metal-free porphyrin, an aggregate forming carbocyanine and a nickel oxide molecule. NEXAFS investigations have been carried out at the carbon, nitrogen and oxygen K-edge as well as on the Ni L-edge. From time-resolved NEXAFS carbon, K-edge measurements of the metal-free porphyrin first insights into a long-lived trap state are gained. Our findings are discussed and compared with density functional theory calculations.
- Open Access
- 12 January 2016
- Published by Optica Publishing Group in Optics Express
- Vol. 24 (2) , 883-887
Regenerative thin-disk amplifier for 300 mJ pulse energy
A regenerative amplifier based on thin-disk technology has been upgraded and optimized. Within a CPA laser system chirped 1 ns pulses are amplified to more than 300 mJ pulse energy. In addition to the high pulse energy the amplifier shows a very good energy stability with 0.25% (rms) fluctuation as well as an excellent beam quality of M2 = 1.04. The regenerative amplifier is equipped with an Yb:YAG thin-disk of 17 mm in diameter pumped with 1.75 kW peak power. It is operated at a repetition rate of 100 Hz. The optical-to-optical efficiency is better than 18%. The laser pulses are compressed to 1.8 ps pulse duration.
- 12 January 2016
- Published by Optica Publishing Group in Optics Express
- Vol. 24 (2) , 883-887
Open AccessRegenerative thin-disk amplifier for 300 mJ pulse energy
A regenerative amplifier based on thin-disk technology has been upgraded and optimized. Within a CPA laser system chirped 1 ns pulses are amplified to more than 300 mJ pulse energy. In addition to the high pulse energy the amplifier shows a very good energy stability with 0.25% (rms) fluctuation as well as an excellent beam quality of M2 = 1.04. The regenerative amplifier is equipped with an Yb:YAG thin-disk of 17 mm in diameter pumped with 1.75 kW peak power. It is operated at a repetition rate of 100 Hz. The optical-to-optical efficiency is better than 18%. The laser pulses are compressed to 1.8 ps pulse duration.
- 22 April 2009
- Published by Optica Publishing Group in Optics Letters
- Vol. 34 (9) , 1378-1380
High-repetition-rate chirped-pulse-amplification thin-disk laser system with joule-level pulse energy
We are reporting on the development of a diode-pumped chirped-pulse-amplification (CPA) laser system based on Yb:YAG thin-disk technology with a repetition rate of 100 Hz and output pulse energy in the joule range. The focus lies with the first results of the preamplifier—a regenerative amplifier (RA) and a multipass amplifier (MP). The system consists of a front end including the CPA stretcher followed by an amplifier chain based on Yb:YAG thin-disk amplifiers and the CPA compressor. It is developed in the frame of our x-ray laser (XRL) program and fulfills all requirements for pumping a plasma-based XRL in grazing incidence pumping geometry. Of course it can also be used for other interesting applications. With the RA pulse energies of more than 165 mJ can be realized. At a repetition rate of 100 Hz a stability of 0.8% over a period of more than 45 min has been measured. The optical-to-optical efficiency is 14%. The following MP amplifier can increase the pulse energy to more than 300 mJ. A nearly bandwidth-limited recompression to less than 2 ps could be demonstrated.- 22 April 2009
- Published by Optica Publishing Group in Optics Letters
- Vol. 34 (9) , 1378-1380
High-repetition-rate chirped-pulse-amplification thin-disk laser system with joule-level pulse energy
We are reporting on the development of a diode-pumped chirped-pulse-amplification (CPA) laser system based on Yb:YAG thin-disk technology with a repetition rate of 100 Hz and output pulse energy in the joule range. The focus lies with the first results of the preamplifier—a regenerative amplifier (RA) and a multipass amplifier (MP). The system consists of a front end including the CPA stretcher followed by an amplifier chain based on Yb:YAG thin-disk amplifiers and the CPA compressor. It is developed in the frame of our x-ray laser (XRL) program and fulfills all requirements for pumping a plasma-based XRL in grazing incidence pumping geometry. Of course it can also be used for other interesting applications. With the RA pulse energies of more than 165 mJ can be realized. At a repetition rate of 100 Hz a stability of 0.8% over a period of more than 45 min has been measured. The optical-to-optical efficiency is 14%. The following MP amplifier can increase the pulse energy to more than 300 mJ. A nearly bandwidth-limited recompression to less than 2 ps could be demonstrated.- 2 September 2005
- Published by American Physical Society (APS) in Physical Review E
- Vol. 72 (3) , 037401
grazing–incidence pumped Ni-like Mo x-ray laserThe operation of a Ni-like Mo x-ray laser at with a repetition rate of has been demonstrated. The laser has been pumped applying the grazing incidence pump arrangement, where a short (picoseconds) pulse irradiates a Mo plasma column generated by a long (a few hundred picoseconds) pulse. The delayed short pulse is incident at a grazing angle on the plasma to heat it efficiently. We used a total energy of less than ( in the long and in the short pulse) in a line focus of by .- 2 September 2005
- Published by American Physical Society (APS) in Physical Review E
- Vol. 72 (3) , 037401
grazing–incidence pumped Ni-like Mo x-ray laserThe operation of a Ni-like Mo x-ray laser at with a repetition rate of has been demonstrated. The laser has been pumped applying the grazing incidence pump arrangement, where a short (picoseconds) pulse irradiates a Mo plasma column generated by a long (a few hundred picoseconds) pulse. The delayed short pulse is incident at a grazing angle on the plasma to heat it efficiently. We used a total energy of less than ( in the long and in the short pulse) in a line focus of by .