Marko Car
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marko Car has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Matko Orsag
Faculty of Electrical and Computer Engineering, University of Zagreb, Zagreb, Croatia
8 shared publications - Antun Ivanovic
Laboratory for Robotics and Intelligent Control Systems (LARICS), Faculty of Electrical Engineering and Computing, University of Zagreb, Zagreb, Croatia
6 shared publications - Stjepan Bogdan
Laboratory for Robotics and Intelligent Control Systems (LARICS), Faculty of Electrical Engineering and Computing, University of Zagreb, Zagreb, Croatia
6 shared publications - Lovro Markovic
University of Zagreb Faculty of Electrical Engineering and Computing, Zagreb, Croatia
4 shared publications - Frano Petric
University of Zagreb
3 shared publications - Jakob Domislovic
Laboratory for Robotics and Intelligent Control Systems (LARICS), Faculty of Electrical Engineering and Computing, University of Zagreb, Zagreb, Croatia
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 99210-99226
Position-Based Visual Servoing With a Marsupial Robotic System
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 99210-99226
Open AccessPosition-Based Visual Servoing With a Marsupial Robotic System
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. PP (10709932) , 2-19
Heterogeneous Multirobot Team: Maritime Inspection and Intervention in Global Navigation Satellite System-Denied Scenarios
Autonomous robotic systems play an increasingly important role in overcoming complex maritime challenges, where the environment requires high adaptability, robustness, and precision. Marsupial robotic systems, combining aerial systems and surface vessels, offer a powerful solution for coordinated missions in Global Navigation Satellite System (GNSS)-denied scenarios, leveraging the unique capabilities of each robot to form a versatile team. This article presents a system integrating advanced sensor fusion, localization, mission planning, and communication to enable seamless collaboration between unmanned aerial vehicles (UAVs) and autonomous surface vehicles (ASVs). The focus is on optimizing the vehicles’ interaction to efficiently locate, retrieve, and transport objects from a target vessel in an adverse sea environment. This article provides a complete system overview, including the hardware setup, algorithms used, implementation details, and field trial results. The results analysis demonstrates the advanced capabilities of the developed ASV‒UAV system in complex real-world maritime operations, underscoring its potential for coordinated multirobot tasks in environments where traditional navigation systems are unavailable. Notably, this system was developed by the team that secured first place in the Mohamed Bin Zayed International Robotic Challenge (MBZIRC), proving its excellence in challenging conditions.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. PP (10709932) , 2-19
Heterogeneous Multirobot Team: Maritime Inspection and Intervention in Global Navigation Satellite System-Denied Scenarios
Autonomous robotic systems play an increasingly important role in overcoming complex maritime challenges, where the environment requires high adaptability, robustness, and precision. Marsupial robotic systems, combining aerial systems and surface vessels, offer a powerful solution for coordinated missions in Global Navigation Satellite System (GNSS)-denied scenarios, leveraging the unique capabilities of each robot to form a versatile team. This article presents a system integrating advanced sensor fusion, localization, mission planning, and communication to enable seamless collaboration between unmanned aerial vehicles (UAVs) and autonomous surface vehicles (ASVs). The focus is on optimizing the vehicles’ interaction to efficiently locate, retrieve, and transport objects from a target vessel in an adverse sea environment. This article provides a complete system overview, including the hardware setup, algorithms used, implementation details, and field trial results. The results analysis demonstrates the advanced capabilities of the developed ASV‒UAV system in complex real-world maritime operations, underscoring its potential for coordinated multirobot tasks in environments where traditional navigation systems are unavailable. Notably, this system was developed by the team that secured first place in the Mohamed Bin Zayed International Robotic Challenge (MBZIRC), proving its excellence in challenging conditions.
- Open Access
- 31 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 10232-10247
Generalized Modeling of Overactuated Aerial Manipulators: Theory and Application
This paper proposes a unified dynamic model for aerial robots which encompasses all known actuation principles including tilting propellers and centroid variation methods such as moving masses or robotic manipulators. Of course, one can envision a wide variety of vehicles, all with different combinations of actuation principles. Therefore, a generalized modeling methodology for such vehicles is developed and presented in this paper. The modeling approach is verified through a comparative analysis of MATLAB simulations and laboratory experiments with a tilting propeller aerial manipulator vehicle, named Toucan . Finally, in order to fully explore and exploit the capabilities of the designed aerial manipulator, contact-based experiments with force tracking are performed using the proposed adaptive impedance controller. To demonstrate the advantages of such a vehicle, the adaptive impedance control method is used to generate position and orientation commands and achieve end-effector force tracking on a flat surface while the aerial manipulator maintains a neutral attitude. This greatly increases the stability and safety of contact-based operations, as the vehicle does not require changes in attitude to meet the force requirements. Note to Practitioners —This paper was motivated by a surge of different configurations of aerial vehicles emerging. A modeling method for generalized aerial vehicles is presented to determine which vehicle configurations are best suited for a specific application. This approach considers vehicles with additional actuators such as tilting propellers and robotic manipulators. The effectiveness of the proposed method is validated on a custom-designed quadrotor with four moving masses emulating centroid variation of a generic robotic manipulator. This original design is augmented with tilting propellers, yielding a truly generalized experimental platform. The generalized modeling algorithm and the experimental platform are tested both in free flight and in a scenario that demonstrates applying the desired force to a flat surface. Overall, we showcase the proposed generalized modeling is a useful tool for the rapid prototyping and design of aerial manipulators, paving the way for more advanced and capable systems in the future. With this approach, practitioners can gain a better understanding of the potential and limitations of their aerial vehicles, and ultimately improve their performance and effectiveness in specific applications.
- 31 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 22 (15455955) , 10232-10247
Open AccessGeneralized Modeling of Overactuated Aerial Manipulators: Theory and Application
This paper proposes a unified dynamic model for aerial robots which encompasses all known actuation principles including tilting propellers and centroid variation methods such as moving masses or robotic manipulators. Of course, one can envision a wide variety of vehicles, all with different combinations of actuation principles. Therefore, a generalized modeling methodology for such vehicles is developed and presented in this paper. The modeling approach is verified through a comparative analysis of MATLAB simulations and laboratory experiments with a tilting propeller aerial manipulator vehicle, named Toucan . Finally, in order to fully explore and exploit the capabilities of the designed aerial manipulator, contact-based experiments with force tracking are performed using the proposed adaptive impedance controller. To demonstrate the advantages of such a vehicle, the adaptive impedance control method is used to generate position and orientation commands and achieve end-effector force tracking on a flat surface while the aerial manipulator maintains a neutral attitude. This greatly increases the stability and safety of contact-based operations, as the vehicle does not require changes in attitude to meet the force requirements. Note to Practitioners —This paper was motivated by a surge of different configurations of aerial vehicles emerging. A modeling method for generalized aerial vehicles is presented to determine which vehicle configurations are best suited for a specific application. This approach considers vehicles with additional actuators such as tilting propellers and robotic manipulators. The effectiveness of the proposed method is validated on a custom-designed quadrotor with four moving masses emulating centroid variation of a generic robotic manipulator. This original design is augmented with tilting propellers, yielding a truly generalized experimental platform. The generalized modeling algorithm and the experimental platform are tested both in free flight and in a scenario that demonstrates applying the desired force to a flat surface. Overall, we showcase the proposed generalized modeling is a useful tool for the rapid prototyping and design of aerial manipulators, paving the way for more advanced and capable systems in the future. With this approach, practitioners can gain a better understanding of the potential and limitations of their aerial vehicles, and ultimately improve their performance and effectiveness in specific applications.
- Open Access
- 10 July 2023
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 108 (3) , 1-13
Towards A Standardized Aerial Platform: ICUAS’22 Firefighting Competition
This paper presents an Unmanned Aerial Vehicle (UAV) platform used for the competition held at the International Conference for Unmanned Aircraft Systems 2022 (ICUAS’22). The envisioned scenario in the competition is delivering an extinguishing ball to a fire with a UAV. Driven on that thought, the qualifying round of the competition is organized in a realistic simulation environment. The competitors are required to navigate through a cluttered environment into a free space, where they perform a search for the target and deliver the ball as close as possible to that target. The competition finals were organized as a part of the conference, with the same goal as in the simulation qualifiers. The UAVs used for the competition are prepared and provided by the organizers. A detailed description of the UAV software and hardware is outlined in the paper as a step towards standardizing aerial research platform.
- 10 July 2023
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 108 (3) , 1-13
Open AccessTowards A Standardized Aerial Platform: ICUAS’22 Firefighting Competition
This paper presents an Unmanned Aerial Vehicle (UAV) platform used for the competition held at the International Conference for Unmanned Aircraft Systems 2022 (ICUAS’22). The envisioned scenario in the competition is delivering an extinguishing ball to a fire with a UAV. Driven on that thought, the qualifying round of the competition is organized in a realistic simulation environment. The competitors are required to navigate through a cluttered environment into a free space, where they perform a search for the target and deliver the ball as close as possible to that target. The competition finals were organized as a part of the conference, with the same goal as in the simulation qualifiers. The UAVs used for the competition are prepared and provided by the organizers. A detailed description of the UAV software and hardware is outlined in the paper as a step towards standardizing aerial research platform.
- Open Access
- 7 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8279
Towards Autonomous Bridge Inspection: Sensor Mounting Using Aerial Manipulators
Periodic bridge inspections are required every several years to determine the state of a bridge. Most commonly, the inspection is performed using specialized trucks allowing human inspectors to review the conditions underneath the bridge, which requires a road closure. The aim of this paper was to use aerial manipulators to mount sensors on the bridge to collect the necessary data, thus eliminating the need for the road closure. To do so, a two-step approach is proposed: an unmanned aerial vehicle (UAV) equipped with a pressurized canister sprays the first glue component onto the target area; afterward, the aerial manipulator detects the precise location of the sprayed area, and mounts the required sensor coated with the second glue component. The visual detection is based on an Red Green Blue - Depth (RGB-D) sensor and provides the target position and orientation. A trajectory is then planned based on the detected contact point, and it is executed through the adaptive impedance control capable of achieving and maintaining a desired force reference. Such an approach allows for the two glue components to form a solid bond. The described pipeline is validated in a simulation environment while the visual detection is tested in an experimental environment.
- 7 September 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (18) , 8279
Open AccessTowards Autonomous Bridge Inspection: Sensor Mounting Using Aerial Manipulators
Periodic bridge inspections are required every several years to determine the state of a bridge. Most commonly, the inspection is performed using specialized trucks allowing human inspectors to review the conditions underneath the bridge, which requires a road closure. The aim of this paper was to use aerial manipulators to mount sensors on the bridge to collect the necessary data, thus eliminating the need for the road closure. To do so, a two-step approach is proposed: an unmanned aerial vehicle (UAV) equipped with a pressurized canister sprays the first glue component onto the target area; afterward, the aerial manipulator detects the precise location of the sprayed area, and mounts the required sensor coated with the second glue component. The visual detection is based on an Red Green Blue - Depth (RGB-D) sensor and provides the target position and orientation. A trajectory is then planned based on the detected contact point, and it is executed through the adaptive impedance control capable of achieving and maintaining a desired force reference. Such an approach allows for the two glue components to form a solid bond. The described pipeline is validated in a simulation environment while the visual detection is tested in an experimental environment.
- 25 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 2768-2774
Compliant Plant Exploration for Agricultural Procedures With a Collaborative Robot
This letter presents a compliant exploration framework based on a collaborative robot Franka Panda that builds a 3D plant stem model. The model is built for agricultural plant treatment procedures without external sensors, as contact forces are estimated from joint torques and robot's dynamic and kinematic model. By devising an impedance-based exploratory control algorithm capable of following an unknown shape, while being provided with only a general direction in which to explore, we eliminate the need for a precise position controller. Our approach is validated through experiments with several mock-up plant stems, showing that the proposed framework is capable of building a satisfactory 3D model of a plant. The method is evaluated against the ground truth model, and compared to the state of the art approach based on an industrial manipulator with external sensors.
- 25 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 2768-2774
Compliant Plant Exploration for Agricultural Procedures With a Collaborative Robot
This letter presents a compliant exploration framework based on a collaborative robot Franka Panda that builds a 3D plant stem model. The model is built for agricultural plant treatment procedures without external sensors, as contact forces are estimated from joint torques and robot's dynamic and kinematic model. By devising an impedance-based exploratory control algorithm capable of following an unknown shape, while being provided with only a general direction in which to explore, we eliminate the need for a precise position controller. Our approach is validated through experiments with several mock-up plant stems, showing that the proposed framework is capable of building a satisfactory 3D model of a plant. The method is evaluated against the ground truth model, and compared to the state of the art approach based on an industrial manipulator with external sensors.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6734-6739
Impedance Based Force Control for Aerial Robot Peg-in-Hole Insertion Tasks
This paper demonstrates the experimental validation of canonical peg-in-hole manipulation task using an aerial robot. The robot consists of a multirotor platform equipped with a dual arm multi degree of freedom manipulator. The paper discusses the introduced kinematic constraints which make sure the robot holds a bolt with both arms. We build our peg-in-hole approach using impedance control which is the foundation of compliant interaction with the environment. We utilize a finite state automaton to plan a multi stage strategy which relies on tactile perception in order to pin point the target. Finally, the whole body locomotion is considered, meaning both the degrees of freedom of multirotor base and the dual arm manipulator are considered.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6734-6739
Impedance Based Force Control for Aerial Robot Peg-in-Hole Insertion Tasks
This paper demonstrates the experimental validation of canonical peg-in-hole manipulation task using an aerial robot. The robot consists of a multirotor platform equipped with a dual arm multi degree of freedom manipulator. The paper discusses the introduced kinematic constraints which make sure the robot holds a bolt with both arms. We build our peg-in-hole approach using impedance control which is the foundation of compliant interaction with the environment. We utilize a finite state automaton to plan a multi stage strategy which relies on tactile perception in order to pin point the target. Finally, the whole body locomotion is considered, meaning both the degrees of freedom of multirotor base and the dual arm manipulator are considered.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 339-344
Mid-Ranging Control Concept for a Multirotor UAV with Moving Masses
This paper addresses the problem of actuators saturation that occur when one applies a moving mass concept to control the attitude of a mul-tirotor UAV. In particular, we propose to combine the moving mass control (MMC) with rotors' variations in a paradigm known as a mid-ranging control. We show that this control structure ensures reference tracking and disturbance rejection with the moving masses operating in the middle of their range, which eventually reduces the possibility to violate their saturation limits. We also address the stability and design of the proposed controller by employing Routh-Hourwitz criterion and root-locus analysis. The controller is verified within a simulation environment, where we test its performance and compare it with a basic MMC concept under various disturbances. Finally, we present experimental results that we obtained with a modified ArduCopter vehicle, which serves as an experimental platform for the MMC verification.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 339-344
Mid-Ranging Control Concept for a Multirotor UAV with Moving Masses
This paper addresses the problem of actuators saturation that occur when one applies a moving mass concept to control the attitude of a mul-tirotor UAV. In particular, we propose to combine the moving mass control (MMC) with rotors' variations in a paradigm known as a mid-ranging control. We show that this control structure ensures reference tracking and disturbance rejection with the moving masses operating in the middle of their range, which eventually reduces the possibility to violate their saturation limits. We also address the stability and design of the proposed controller by employing Routh-Hourwitz criterion and root-locus analysis. The controller is verified within a simulation environment, where we test its performance and compare it with a basic MMC concept under various disturbances. Finally, we present experimental results that we obtained with a modified ArduCopter vehicle, which serves as an experimental platform for the MMC verification.