YZYingxiang Zhai

Yingxiang Zhai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yingxiang Zhai has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sustainable Long‐Living Afterglow From a Natural Polyphenol Embedded in Urea‐Formaldehyde Resin

    by Mingrui Li, Yujie Bai, Yuting Wang, Yingxiang Zhai, Zhijun Chen, Shujun Li

    Room‐temperature phosphorescent (RTP) materials have attracted considerable attention for optoelectronics and anti‐counterfeiting, but developing sustainable, high‐performance RTP systems from natural resources remains challenging. Here we report a strategy to achieve long‐lived afterglow by embedding ellagic acid (EA) into a urea‐formaldehyde (UF) resin matrix. The EA/UF composite exhibits green RTP emission with a lifetime of 984.2 ms. Mechanistic studies reveal that the restricted carbonyl moieties of EA and the formation of a compact crosslinked network with UF promote spin‐orbit coupling and stabilize triplet excitons. By incorporating rhodamine B (RhB), red afterglow was achieved through a triplet‐to‐singlet Förster resonance energy transfer (TS‐FRET) mechanism. This strategy is universal: tannic acid, gallic acid, caffeic acid, and vanillic acid can all be converted into afterglow RTP materials in the UF matrix. As proof‐of‐concept, EA/UF was used for latent fingerprint imaging, time‐resolved anti‐counterfeiting, and 3D shaping. This work provides a sustainable platform for activating long‐lived afterglow RTP from renewable natural polyphenols.

  • Open Access

    A Bio‐Based Recyclable Phosphorescent Glass From Dehydroabietic Acid

    by Yuning Wang, Caiyun Wang, Shiyan Han, Yingxiang Zhai, Penghua Zhao, Xue Liu, Shujun Li, Chunlei Zhang, Tony D. James, Zhijun Chen

    Bio‐based optical glasses exhibit great potential but remain elusive. This study presents a biodegradable glass derived from dehydroabietic acid (DA‐Glass) via a melt‐annealing process. The material transitions from crystalline to a stable amorphous state, exhibiting optical transparency, thermal stability, hydrophobicity and superior mechanical properties. Molecular simulations reveal that annealing enhances the hydrogen‐bonding network and introduces weak interactions, optimizing intermolecular forces and improving thermodynamic stability. DA‐Glass exhibits photoactivated room‐temperature phosphorescence (RTP), enabled by UV‐induced oxygen consumption and restricted molecular motion facilitated by cyclohexane units. The RTP is reversibly modulated by UV exposure and displays stability in water. Applications in smart anti‐counterfeiting, information encryption, and recyclable 3D printing are demonstrated, highlighting the potential for sustainable optical technologies.

  • Open Access

    Sustainable Room Temperature Phosphorescence From Carbon Dots Confined in a Cellulose‐Rich Coconut Coir Matrix

    by Xinyue Zhang, Haozhou Sun, Ziqi Zhang, Huimin Cai, Yingxiang Zhai, Xueqiong Yin, Zhijun Chen, Shujun Li

    Room temperature phosphorescence (RTP) materials derived from sustainable resources are highly desirable but remain challenging due to the intrinsic instability of triplet excitons under ambient conditions. Herein, a biobased RTP system is reported by selectively integrating chlorogenic acid‐derived carbon dots (CDs) into a cellulose‐rich coconut coir matrix. The coir fiber, after oxidative delignification, forms a rigid and dense hydrogen bond network that effectively confines the emissive CDs and suppresses non‐radiative decay. The incorporation of CDs not only introduces tunable emissive states but also enables stable phosphorescence through synergistic interactions with the matrix, achieving lifetimes up to 529.07 ms under ambient conditions. The phosphorescence color can be continuously tuned from green to orange–yellow by varying the precursor composition, while excitation‐dependent afterglow further enables multicolor phosphorescence from a single material. Furthermore, the materials exhibit excellent processability and can be fabricated into films, fibers, powders, and sponges without loss of RTP properties. This work demonstrates a sustainable strategy for constructing RTP materials using biomass‐derived cellulose as a structural scaffold, offering a promising pathway for high‐value utilization of agricultural waste in anti‐counterfeiting and information encryption.

  • Open Access

    Biomass-based thermally tunable dual afterglow with room temperature daylight visibility

    by Haozhou Sun, Luyao Wang, Sitong Guo, Min Wang, Yingxiang Zhai, Weiming Yin, Shouxin Liu, Jian Li, Zhijun Chen, Shujun Li

    Biomass-derived long-persistent afterglow materials that simultaneously deliver thermally activated delayed fluorescence (TADF) and room-temperature phosphorescence (RTP) are highly sought after but remain challenging to achieve, particularly when daylight-visible RTP and high-temperature-tolerant, color-tunable TADF are required. Herein, we develop a thermally tunable RTP-TADF dual-mode afterglow material featuring thermochromic green-to-blue emission by using boric acid (BA) to covalently crosslink natural ellagic acid (EA) and cellulose (Cell) in situ during a facile air-drying process. The resulting EA@Cell, with B-O-C-rigidified structural network, exhibits long-persistent green RTP that remains visible to the naked eye for up to 8 s under daylight conditions upon ultraviolet excitation. Notably, EA@Cell exhibits thermally enhanced TADF emission across 293–413 K, with a 127-fold increase in afterglow lifetime, and maintains its structural integrity and emissive robustness even at temperatures as high as 453 K. As a practical demonstration of EA@Cell, the solution of EA and BA is formulated into daylight-visible RTP inks and thermochromic afterglow inks, enabling low-cost cellulose-based anti-counterfeiting, high-temperature thermal sensing, and dynamic information encryption.


  • Open Access

    Solvent-free processing of lignin into robust room temperature phosphorescent materials

    by Min Wang, Wei-Ming Yin, Yingxiang Zhai, Jingyi Zhou, Shouxin Liu, Jian Li, Shujun Li, Tony D. James, Zhijun Chen

    Producing room temperature phosphorescent (RTP) materials from biomass resources using a solvent free method is essential but hard to achieve. Here, we discovered that lignin dissolved well in the liquid monomer, 2-hydroxyethyl acrylate (HEA), due to extensive hydrogen bonding and non-bonding interactions between lignin and HEA. Motivated by this discovery, we developed a solvent free system consisting of HEA and urethane dimethacrylate (UDMA) for converting lignin into RTP materials. With this design, lignin generated radicals upon UV irradiation, which initiated the polymerization of HEA (as monomer) and UDMA (as crosslinker). The as-obtained polymer network rigidifies lignin and activates the humidity/water-resistant RTP of lignin with a lifetime of 202.9 ms. Moreover, the afterglow color was successfully tuned to red after loading with RhB via energy transfer (TS-FRET). Using these properties, the as-developed material was used as photocured multiple-emission RTP inks, luminescent coatings and a smart anti-counterfeiting logo for a medicine bottle.


  • Open Access

    Photoactivated room temperature phosphorescence from lignin

    by Jingyi Zhou, Bing Tian, Yingxiang Zhai, Min Wang, Shouxin Liu, Jian Li, Shujun Li, Tony D. James, Zhijun Chen

    Sustainable photoactivated room temperature phosphorescent materials exhibit great potential but are difficult to obtain. Here, we develop photoactivated room temperature phosphorescent materials by covalently attaching lignin to polylactic acid, where lignin and polylactic acid are the chromophore and matrix, respectively. Initially the phosphorescence of the lignin is quenched by residual O2. However, the phosphorescence is switched on when the residual oxygen is consumed by the triplet excitons of lignin under continuous UV light irradiation. As such, the lifetime increases from 3.0 ms to 221.1 ms after 20 s of UV activation. Interestingly, the phosphorescence is quenched again after being kept under an atmosphere of air for 2 h in the absence of UV irradiation due to the diffusion of oxygen into the materials. Using these properties, as-developed material is successfully used as a smart anti-counterfeiting logo for a medicine bottle and for information recording.


  • Open Access

    Room-temperature phosphorescence from bamboo fibers and designed materials

    by Yingxiang Zhai, Jingyi Zhou, Ben Dang, Xinping Cui, Shouxin Liu, Xuetong Shi, Ran Bi, Jian Li, Shujun Li, Orlando Rojas, et al.

    Recent developments in room-temperature phosphorescence (RTP) from biobased polymers have shown great promise in realizing sustainable RTP systems. Here, we introduce an efficient “top-down” method to achieve RTP biofibers using sixteen species of bamboo following partial delignification (B-fibers). The photophysical characterization combined with structural, surface and chemical inquiries (XRD, XPS, FTIR) along with DFT calculations revealed the fundamental reasons for RTP, associated with the interactions between cellulose, hemicelluloses and the residual lignin. Multiple emissive oxygen-containing clusters and aromatic chromophores in the B-fibers were shown to be RTP-active (wavelengths going from 450 to 530 nm at an increased excitation from 240 to 360 nm). Green afterglow with a lifetime of 294.9 ms (excitation wavelength = 270 nm) was observed while blue fluorescence and long-lived yellow-green RTP took place under 365 nm irradiation. Such effects were modulated by the crystalline environment and hydrogen bonding interactions. The RTP emission of the B-fibers was found to be sensitive to temperature, excitation and humidity. Moreover, when combined with a water-soluble fluorescent dye (following simple immersion), red afterglow emission was demonstrated under the effect of energy-transfer. Following these results, we synthesized functional luminescent materials (paper, films, textiles and aerogels), proposed herein as practical, sustainable and compostable choices for photoexcitation in the visible range.

  • Inside Back Cover: Confinement of Sustainable Carbon Dots Results in Long Afterglow Emitters and Photocatalyst for Radical Photopolymerization (Angew. Chem. Int. Ed. 39/2024)

    by Ping Wang, Min Ge, Xiongfei Luo, Yingxiang Zhai, Nicolai Meckbach, Veronika Strehmel, Shujun Li, Zhijun Chen, Bernd Strehmel

  • Innenrücktitelbild: Der Einschluss von nachhaltigen Kohlenstoffpunkten führt zu langnachleuchtenden Emittern und zu Photokatalysatoren für die radikalische Photopolymerisation (Angew. Chem. 39/2024)

    by Ping Wang, Min Ge, Xiongfei Luo, Yingxiang Zhai, Nicolai Meckbach, Veronika Strehmel, Shujun Li, Zhijun Chen, Bernd Strehmel

  • Open Access

    Der Einschluss von nachhaltigen Kohlenstoffpunkten führt zu langnachleuchtenden Emittern und zu Photokatalysatoren für die radikalische Photopolymerisation

    by Ping Wang, Min Ge, Xiongfei Luo, Yingxiang Zhai, Nicolai Meckbach, Veronika Strehmel, Shujun Li, Zhijun Chen, Bernd Strehmel

    Nachhaltige Kohlenstoffpunkte auf der Basis von Cellulose, insbesondere Carboxymethylcellulose basierende Kohlenstoffpunkte (CMCCDs), wurden in ein anorganisches Netzwerk eingeschlossen, was zur Bildung von CMCCDs@SiO2 führte. Das resultierende Material zeigte ein lange anhaltendes Nachleuchten, welches ein Zeitfenster von mehreren Sekunden auch in Gegenwart von Luft umfasste. Temperaturabhängige Emissionsspektren gaben eine Information über die thermisch aktivierte verzögerte Fluoreszenz (TADF) und eine Phosphoreszenz bei Raumtemperatur (RTP), während Experimente zur photoinduzierten Generierung von Ladungsträgern zu einem tieferen Verständnis der Verfügbarkeit von Ladungen in der Dunkelphase führten und daher zu ihrer Verfügbarkeit an der Katalysatoroberfläche. Der photo‐ATRP Initiator α‐Bromphenylethylacetat (EBPA) bewirkte eine Löschung der Emission, was zu einer Verkürzung des Zeitfensters für die Emission vom Millisekundenbereich in den Nanosekundenbereich führte und auf eine Beteiligung des Triplettzustandes an dem photoinduzierten Elektronentransfer (PET) hinweist. Sowohl die freie radikalische Polymerisation als auch die kontrollierte auf einem photo‐ATRP Protokoll basierende radikalische Polymerisation von MMA oder in Kombination mit Styren funktionierten erfolgreich. Die metallfreie photo‐ATRP führte basierend auf einem reduktiven Mechanismus zu einem kettenverlängerbaren Makroinitiator. Die Zugabe von 9 ppm Cu2+ führte zu einem Verhältnis Mw/Mn von 1.4 obwohl eine Erhöhung auf 72 ppm die Einheitlichkeit der Polymere verbesserte, was einem Mw/Mn=1.03 entspricht. Ergänzende Experimente mit in kerria laca eingeschlossenen Kohlenstoffpunkten, insbesondere KCDs@SiO2, führten zu ähnlichen Ergebnissen. Die Abscheidung von Cu2+ (9 ppm) an der Photokatalysatoroberfläche erklärt die bessere Dispersität der Polymere, welche mittels der ATRP gebildet wurden.