YYYavuz Emre Yagci

Yavuz Emre Yagci

*This is an algorithmically generated author record based on publicly available information.

Yavuz Emre Yagci has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis of Chitosan-Based Bio-Polyols Using Glycerol and PEG-400 for Sustainable Semi-Rigid Polyurethane Foams

    by Royal Guliyev, Nalan Tekin, Mustafa Özgür Bora, Yavuz Emre Yağci, Aygun Isayeva

    Replacing petroleum-based polyols with renewable feedstocks is essential for sustainable polyurethane (PU) production. In this study, an eco-friendly bio-polyol was synthesized using chitosan, glycerine, and PEG-400 to prepare semi-rigid bio-based PU foams at 50%, 75%, and 100% substitution ratios. The chemical, morphological, mechanical, and thermal properties were systematically evaluated. FTIR confirmed successful bio-polyol integration, while SEM revealed refined cell-dimensions and enhanced structural homogeneity. Although the apparent density decreased from 0.0835 g/cm3 to 0.0657 g/cm3, the bio-based foams exhibited superior water resistance and mechanical performance with the 75% substituted formulation (75 Bio PU). To justify field performance under demanding operational environments (e.g., building envelopes under solar heat load and hot pipeline insulation), the thermal conductivity was evaluated at 100 °C, maintaining efficient insulation (0.044–0.047 W m−1 K−1). TGA/DTG analysis demonstrated that while bio-polyol incorporation lowered the initial decomposition temperatures, 75 Bio PU enhanced the thermal resistance (T %max = 408 °C) and char residue (15.68%), underscoring superior high-temperature carbonization. UL-94 tests indicated the need for supplementary flame-retardants. Overall, the 75 Bio PU formulation provides optimal balanced performance for sustainable building insulation, industrial heat shielding, and automotive interior components.

  • Open Access

    Influence of Form Factor on Microstructural, Mechanical and Electrical Properties of Electrically Conductive Polyvinylidene Fluoride Processed by Arburg Plastic Freeforming

    by Nurettin Arikan, Kevin Klier, Ibrahim Mutlu, Michael Hartung, Yavuz Emre Yagci, Mustafa Ozgur Bora, Hans-Peter Heim

    The utilization of polymer-based additive manufacturing processes for the production of functional components, consumer goods, spare parts, etc., has increased thanks to recent technological advances. The Arburg Plastic Freeforming (APF) process is a promising AM technology, in which standard plastic granules are deployed, and droplets are discharged along a track instead of using continuously extruded straws, unlike other filament-based processes, to the benefit of various industries that require good mechanical properties while maintaining dimensional precision. Due to the round shape of the droplets and tracks, however, defects such as voids can occur between individual paths during processing, which affect, most notably, mechanical properties. The electrical/ferroelectric properties of conductive/electroactive polymers are also affected. This study focuses on determining the optimal form factor for processing a special grade polyvinylidene fluoride (PVDF) material whilst other parameters, along with the ones ascertained in previous work, are kept constant. Along with tensile tests, X-ray computed microtomography (µ-CT) and scanning electron microscopy (SEM) analyses are implemented, particularly to observe microstructural porosity. Electrical properties and possible piezoelectric behavior are investigated via an originally adapted analytical method. The results provide important insights into the APF process and printing high-performance plastics with individual features, expanding the potential for further applications.

  • Open Access

    Experimental and Numerical Investigation of Flow and Alignment Behavior of Waste Tire-Derived Graphene Nanoplatelets in PA66 Matrix during Melt-Mixing and Injection

    by Kuray Dericiler, Hadi Mohammadjafari Sadeghi, Yavuz Emre Yagci, Hatice S. Sas, Burcu Saner Okan

    Homogeneous dispersion of graphene into thermoplastic polymer matrices during melt-mixing is still challenging due to its agglomeration and weak interfacial interactions with the selected polymer matrix. In this study, an ideal dispersion of graphene within the PA66 matrix was achieved under high shear rates by thermokinetic mixing. The flow direction of graphene was monitored by the developed numerical methodology with a combination of its rheological behaviors. Graphene nanoplatelets (GNP) produced from waste-tire by upcycling and recycling techniques having high oxygen surface functional groups were used to increase the compatibility with PA66 chains. This study revealed that GNP addition increased the crystallization temperature of nanocomposites since it acted as both a nucleating and reinforcing agent. Tensile strength and modulus of PA66 nanocomposites were improved at 30% and 42%, respectively, by the addition of 0.3 wt% GNP. Flexural strength and modulus were reached at 20% and 43%, respectively. In addition, the flow model, which simulates the injection molding process of PA66 resin with different GNP loadings considering the rheological behavior and alignment characteristics of GNP, served as a tool to describe the mechanical performance of these developed GNP based nanocomposites.


  • Open Access

    Graphene from waste tire by recycling technique for cost-effective and light-weight automotive plastic part production

    by Burcu Saner Okan, Yusuf Menceloğlu, Burcu Girginer Ozunlu, Yavuz Emre Yagci

    Light weight vehicle design is a principal keystone to improving fuel efficiency and vehicle performance whilst reducing adverse environmental impacts. At this point, graphene is a solution with a high potential to further reduce vehicle weight and improve mechanical and thermal properties. With a unique combination of mechanical, thermal and electrical properties, graphene shows great potential for exploitation in the automotive industry. In the present work, we developed a technology for the production of graphene nanoplatelets (GNP) from recycled carbon black obtained from the pyrolysis of waste tire by using recycling and upcycling technology. This graphene is comparably cheaper than available ones in the market. This graphene as a reinforcing and nucleating agent was used to reduce glass fiber amount for the production of cost-effective and light-weight automotive plastic composite part by extrusion and injection techniques. With this newly developed compound, polyamide 66 (PA66) based automotive part was produced by the integration of 1 wt% GNP and providing 10% weight reduction. Consequently, this multidisciplinary work will favor the integration of new knowledge and will ensure significant innovation potential in the field of new thermoplastic based composites for the automotive industry.