Bo Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bo Zhou has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Kun Qian
School of Automation, Southeast University, Nanjing, China
7 shared publications - Fang Fang
School of Automation, Southeast University, Nanjing, China
6 shared publications - Yan Pan
School of Automation, Southeast University, Changsha, China
6 shared publications Fang Fang
5 shared publications- Shihua Li
School of Automation and Key Laboratory of Measurement and Control of Complex Systems of Engineering, Ministry of Education, Southeast University, Nanjing, China
4 shared publications - Jiajie Wu
School of Automation, Southeast University and the Key Laboratory of Measurement and Control of CSE, Ministry of Education, Nanjing, China
3 shared publications
Latest Publications
- 1 January 2027
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 12 (1) , 33-40
DT-TacVLA: A Dual-Timescale Tactile-Enhanced Vision-Language-Action Model for Contact-Rich Manipulation
- 1 January 2027
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 12 (1) , 33-40
DT-TacVLA: A Dual-Timescale Tactile-Enhanced Vision-Language-Action Model for Contact-Rich Manipulation
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (4) , 5214-5221
Sequential Probabilistic Descriptor via Uncertainty-Aware Multi-Modal Fusion for Safety-Critical Place Recognition
The success of loop closure and global map consistency largely relies on robust place recognition, making it a safety-critical capability for mobile robots in autonomous navigation. However, most existing approaches prioritize recognition accuracy while overlooking uncertainty estimation, which may lead to overconfident false predictions and compromise navigation safety. To address this limitation, this letter proposes a sequential multi-modal probabilistic descriptor for place representation, explicitly modeling uncertainty at both the modality and decision levels. Specifically, sequential image and LiDAR inputs leverage temporal information and are encoded as probabilistic embeddings, followed by an uncertainty-aware fusion. By adaptively balancing the contribution of each modality, prediction conflicts caused by sensor degradation are mitigated. Predictive uncertainty is further estimated through probabilistic combination rules, providing reliable confidence measures that allow downstream tasks to filter out high-uncertainty predictions. Extensive evaluations on NCLT, Oxford Robotcar and WildScenes datasets are conducted, covering long-term tasks, seasonal changes, illumination variations, and unstructured natural environments. Results show that the proposed method achieves superior performance across diverse conditions and provides well-calibrated uncertainty estimates that enable reliable failure detection, highlighting its potential for deployment in safety-critical scenes.
- 3 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (4) , 5214-5221
Sequential Probabilistic Descriptor via Uncertainty-Aware Multi-Modal Fusion for Safety-Critical Place Recognition
The success of loop closure and global map consistency largely relies on robust place recognition, making it a safety-critical capability for mobile robots in autonomous navigation. However, most existing approaches prioritize recognition accuracy while overlooking uncertainty estimation, which may lead to overconfident false predictions and compromise navigation safety. To address this limitation, this letter proposes a sequential multi-modal probabilistic descriptor for place representation, explicitly modeling uncertainty at both the modality and decision levels. Specifically, sequential image and LiDAR inputs leverage temporal information and are encoded as probabilistic embeddings, followed by an uncertainty-aware fusion. By adaptively balancing the contribution of each modality, prediction conflicts caused by sensor degradation are mitigated. Predictive uncertainty is further estimated through probabilistic combination rules, providing reliable confidence measures that allow downstream tasks to filter out high-uncertainty predictions. Extensive evaluations on NCLT, Oxford Robotcar and WildScenes datasets are conducted, covering long-term tasks, seasonal changes, illumination variations, and unstructured natural environments. Results show that the proposed method achieves superior performance across diverse conditions and provides well-calibrated uncertainty estimates that enable reliable failure detection, highlighting its potential for deployment in safety-critical scenes.
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (5) , 7369-7380
A Data-Driven Modeling and Motion Control of Heavy-Load Hydraulic Manipulators via Reversible Transformation
This work proposes a physics-guided, data-driven reversible modeling and control framework to achieve unmanned and automated operation of industrial heavy-load hydraulic manipulators. Rather than directly using a neural network to approximate the dynamics, we categorize the hydraulic manipulator system into an irreversible dead-zone and reversible dynamics and construct the reversible third-order learning model based on analysis of the physical mechanism. This reversible nonlinear model (RevNM) enables a bidirectional mapping from inputs to state changes, and the inverse dynamics can be used as feedforward compensation of the control framework. The RevNM is first trained offline using supervised learning techniques and then updated online through predictive residuals to adapt to loads or disturbances caused by environmental interactions. Simulations and experiments show the effectiveness of the proposed modeling and control framework. With a commercial 39-ton hydraulic excavator, the proposed method achieves a 22.7% improvement in trajectory tracking accuracy compared with current mainstream machine learning methods. It has also been successfully applied to scrap steel handling tasks without load sensing and achieves load-adaptive adjustment.
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (5) , 7369-7380
A Data-Driven Modeling and Motion Control of Heavy-Load Hydraulic Manipulators via Reversible Transformation
This work proposes a physics-guided, data-driven reversible modeling and control framework to achieve unmanned and automated operation of industrial heavy-load hydraulic manipulators. Rather than directly using a neural network to approximate the dynamics, we categorize the hydraulic manipulator system into an irreversible dead-zone and reversible dynamics and construct the reversible third-order learning model based on analysis of the physical mechanism. This reversible nonlinear model (RevNM) enables a bidirectional mapping from inputs to state changes, and the inverse dynamics can be used as feedforward compensation of the control framework. The RevNM is first trained offline using supervised learning techniques and then updated online through predictive residuals to adapt to loads or disturbances caused by environmental interactions. Simulations and experiments show the effectiveness of the proposed modeling and control framework. With a commercial 39-ton hydraulic excavator, the proposed method achieves a 22.7% improvement in trajectory tracking accuracy compared with current mainstream machine learning methods. It has also been successfully applied to scrap steel handling tasks without load sensing and achieves load-adaptive adjustment.
- 30 October 2025
- Published by Springer Nature
- p. 16-27
HTCplanner: A Real-Time Hierarchical Traversability and Crossability-Based Planner for Bipedal Robots
- 30 October 2025
- Published by Springer Nature
- p. 16-27
HTCplanner: A Real-Time Hierarchical Traversability and Crossability-Based Planner for Bipedal Robots
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (9) , 8826-8833
Safety-Critical Ultra-Wideband 3D Localization With Set-Membership Uncertainty Representation
Existing localization methods frequently focus on offline benchmarking based on datasets and assume that the methods possess the same performance in online applications without ground truth. However, since datasets always provide a limited number of scenarios, the reliability of localization methods in unknown scenarios cannot be inferred from their performance on the datasets. Therefore, the over-reliance on benchmarking results will pose a safety risk to the practical applications of localization methods. Inspired by this challenge, in this letter, we propose a safety-critical localization system that can measure the reliability of the estimated locations online in real time based on the set-membership uncertainty. By considering various system uncertainties and addressing the imbalance issue within the current set-membership filters, we design a dimension-balanced set-membership filter (DB-SMF) for ultra-wideband 3D localization based on the unknown but bounded (UBB) assumption and the dimension-balanced objective functions. Compared with the Gaussian uncertainty, our set-membership uncertainty can cover the unknown ground-truth locations with bounded sets. In safety-critical scenarios, this uncertainty can provide deterministic state bounds for tasks such as motion control and obstacle avoidance, thereby better ensuring the safety of the robot. Real-world experiments show that our DB-SMF can estimate set-membership uncertainties with the ability to cover unknown ground truth in finite spaces from range measurements and in this way ensure the safety of the localization system.
- 16 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (9) , 8826-8833
Safety-Critical Ultra-Wideband 3D Localization With Set-Membership Uncertainty Representation
Existing localization methods frequently focus on offline benchmarking based on datasets and assume that the methods possess the same performance in online applications without ground truth. However, since datasets always provide a limited number of scenarios, the reliability of localization methods in unknown scenarios cannot be inferred from their performance on the datasets. Therefore, the over-reliance on benchmarking results will pose a safety risk to the practical applications of localization methods. Inspired by this challenge, in this letter, we propose a safety-critical localization system that can measure the reliability of the estimated locations online in real time based on the set-membership uncertainty. By considering various system uncertainties and addressing the imbalance issue within the current set-membership filters, we design a dimension-balanced set-membership filter (DB-SMF) for ultra-wideband 3D localization based on the unknown but bounded (UBB) assumption and the dimension-balanced objective functions. Compared with the Gaussian uncertainty, our set-membership uncertainty can cover the unknown ground-truth locations with bounded sets. In safety-critical scenarios, this uncertainty can provide deterministic state bounds for tasks such as motion control and obstacle avoidance, thereby better ensuring the safety of the robot. Real-world experiments show that our DB-SMF can estimate set-membership uncertainties with the ability to cover unknown ground truth in finite spaces from range measurements and in this way ensure the safety of the localization system.
- 30 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (11) , 11520-11529
Admittance Visuomotor Policy Learning for General-Purpose Contact-Rich Manipulations
Contact force in contact-rich environments is an essential modality for robots to perform general-purpose manipulation tasks, as it provides information to compensate for the deficiencies of visual and proprioceptive data in collision perception, high-precision grasping, and efficient manipulation. In this article, we propose an admittance visuomotor policy framework for continuous, general-purpose, and contact-rich manipulations. During demonstrations, we designed a low-cost, user-friendly teleoperation system with contact interaction, aiming to gather compliant robot demonstrations and accelerate the data collection process. During training and inference, we propose a diffusion-based model to plan action trajectories and desired contact forces from multimodal observation that includes contact force, vision and proprioception. We utilize an admittance controller for compliance action execution. A comparative evaluation with two state-of-the-art methods was conducted on five challenging tasks, each focusing on different action primitives, to demonstrate our framework’s generalization capabilities. Results show our framework achieves the highest success rate and exhibits smoother and more efficient contact compared to other methods, the contact force required to complete each tasks was reduced on average by 48.8%, and the success rate was increased on average by 15.3%. Videos are available at https://ryanjiao.github.io/AdmitDiffPolicy/.
- 30 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (11) , 11520-11529
Admittance Visuomotor Policy Learning for General-Purpose Contact-Rich Manipulations
Contact force in contact-rich environments is an essential modality for robots to perform general-purpose manipulation tasks, as it provides information to compensate for the deficiencies of visual and proprioceptive data in collision perception, high-precision grasping, and efficient manipulation. In this article, we propose an admittance visuomotor policy framework for continuous, general-purpose, and contact-rich manipulations. During demonstrations, we designed a low-cost, user-friendly teleoperation system with contact interaction, aiming to gather compliant robot demonstrations and accelerate the data collection process. During training and inference, we propose a diffusion-based model to plan action trajectories and desired contact forces from multimodal observation that includes contact force, vision and proprioception. We utilize an admittance controller for compliance action execution. A comparative evaluation with two state-of-the-art methods was conducted on five challenging tasks, each focusing on different action primitives, to demonstrate our framework’s generalization capabilities. Results show our framework achieves the highest success rate and exhibits smoother and more efficient contact compared to other methods, the contact force required to complete each tasks was reduced on average by 48.8%, and the success rate was increased on average by 15.3%. Videos are available at https://ryanjiao.github.io/AdmitDiffPolicy/.
- 11 April 2025
- Published by Elsevier in Expert Systems with Applications
- Vol. 280
An effective hybrid genetic algorithm for the multi-robot task allocation problem with limited span
- 11 April 2025
- Published by Elsevier in Expert Systems with Applications
- Vol. 280
An effective hybrid genetic algorithm for the multi-robot task allocation problem with limited span
- 17 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (5) , 4826-4833
3D Single Object Tracking With Cross-Modal Fusion Conflict Elimination
3D single object tracking based on point clouds is a key challenge in robotics and autonomous driving technology. Mainstream methods rely on point clouds for geometric matching or motion estimation between the target template and the search area. However, the lack of texture and the sparsity of incomplete point clouds make it difficult for unimodal trackers to distinguish objects with similar structures. To overcome the limitations of previous methods, this paper proposes a cross-modal fusion conflict elimination tracker (CCETrack). The point clouds collected by LiDAR provide accurate depth and shape information about the surrounding environment, while the camera sensor provides RGB images containing rich semantic and texture information. CCETrack fully leverages both modalities to track 3D objects. Specifically, to address cross-modal conflicts caused by heterogeneous sensors, we propose a global context alignment module that aligns RGB images with point clouds and generates enhanced image features. Then, a sparse feature enhancement module is designed to optimize voxelized point cloud features using the rich image features. In the feature fusion stage, both modalities are converted into BEV features, with the template and search area features fused separately. A self-attention mechanism is employed to establish bidirectional communication between regions. Our method maximizes the use of effective information and achieves state-of-the-art performance on the KITTI and nuScenes datasets through multimodal complementarity.
- 17 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (5) , 4826-4833
3D Single Object Tracking With Cross-Modal Fusion Conflict Elimination
3D single object tracking based on point clouds is a key challenge in robotics and autonomous driving technology. Mainstream methods rely on point clouds for geometric matching or motion estimation between the target template and the search area. However, the lack of texture and the sparsity of incomplete point clouds make it difficult for unimodal trackers to distinguish objects with similar structures. To overcome the limitations of previous methods, this paper proposes a cross-modal fusion conflict elimination tracker (CCETrack). The point clouds collected by LiDAR provide accurate depth and shape information about the surrounding environment, while the camera sensor provides RGB images containing rich semantic and texture information. CCETrack fully leverages both modalities to track 3D objects. Specifically, to address cross-modal conflicts caused by heterogeneous sensors, we propose a global context alignment module that aligns RGB images with point clouds and generates enhanced image features. Then, a sparse feature enhancement module is designed to optimize voxelized point cloud features using the rich image features. In the feature fusion stage, both modalities are converted into BEV features, with the template and search area features fused separately. A self-attention mechanism is employed to establish bidirectional communication between regions. Our method maximizes the use of effective information and achieves state-of-the-art performance on the KITTI and nuScenes datasets through multimodal complementarity.