Majlinda Vasjari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Majlinda Vasjari has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Vladimir M. Mirsky
Nanobiotechnology Department, Institute of Biotechnology, Brandenburg University of Technology Cottbus-Senftenberg, 01968 Senftenberg, Germany
5 shared publications - Lueda Kulla
Department of Chemistry Faculty of Natural Sciences University of Tirana Tiranë 1000 Albania
4 shared publications - Arben Merkoçi
Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and BIST Barcelona Spain
3 shared publications - David Panáček
Regional Centre of Advanced Technologies and Materials Czech Advanced Technology and Research Institute (CATRIN) Palacký University Olomouc Šlechtitelů 241/27 783 71 Olomouc Czech Republic
3 shared publications - Martin‐Alex Nalepa
Regional Centre of Advanced Technologies and Materials Czech Advanced Technology and Research Institute (CATRIN) Palacký University Olomouc Šlechtitelů 241/27 783 71 Olomouc Czech Republic
3 shared publications - Michal Otyepka
T4Innovations, VŠB - Technical University of Ostrava, 17. listopadu 2172/15, Ostrava-Poruba 708 00,22 Czech Republic
3 shared publications
Latest Publications
- Open Access
- 20 January 2026
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- p. 3150
Electrochemical sensing of atenolol using silver-reduced graphene oxide carbon paste nanocomposite electrode
Atenolol, one of the most prescribed β₁-selective adrenergic blockers, has been increasingly detected in aquatic ecosystems due to incomplete elimination in sewage treatment plants, posing an ecotoxicological hazard to the environment. Here, an electrochemical sensor based on silver-decorated reduced graphene oxide composite carbon paste electrode (rGO@Ag-CPE) was designed for the ultrasensitive electroanalytical determination of atenolol in real-world samples. The morphology and chemical composition of rGO@Ag-CPE were investigated by transmission electron microscopy and energy-dispersive spectroscopy analyses, while the electrochemical properties were evaluated by cyclic and square wave voltammetry techniques. The rGO@Ag-CPE demonstrated excellent electrocatalytic performance toward Atenolol oxidation, attributed to the unique properties of reduced graphene oxide and silver nanoparticles, which provide high conductivity and efficient electrocatalysis, thereby helping to prevent unwanted Atenolol degradation. Under optimized electrochemical sensing conditions, the rGO@Ag-CPE sensor exhibited a linear dynamic range of 20-859 μM (R² = 0.9953), a low detection limit of 2.9 μM, and good reproducibility (relative standard deviation < 4.0 %). A validation study on real-world samples showed good atenolol recovery of 88.8-102% in natural waters and 97-99.2 % in pharmaceutical tablets.
- 20 January 2026
- Published by International Association of Physical Chemists (IAPC) in Journal of Electrochemical Science and Engineering
- p. 3150
Open AccessElectrochemical sensing of atenolol using silver-reduced graphene oxide carbon paste nanocomposite electrode
Atenolol, one of the most prescribed β₁-selective adrenergic blockers, has been increasingly detected in aquatic ecosystems due to incomplete elimination in sewage treatment plants, posing an ecotoxicological hazard to the environment. Here, an electrochemical sensor based on silver-decorated reduced graphene oxide composite carbon paste electrode (rGO@Ag-CPE) was designed for the ultrasensitive electroanalytical determination of atenolol in real-world samples. The morphology and chemical composition of rGO@Ag-CPE were investigated by transmission electron microscopy and energy-dispersive spectroscopy analyses, while the electrochemical properties were evaluated by cyclic and square wave voltammetry techniques. The rGO@Ag-CPE demonstrated excellent electrocatalytic performance toward Atenolol oxidation, attributed to the unique properties of reduced graphene oxide and silver nanoparticles, which provide high conductivity and efficient electrocatalysis, thereby helping to prevent unwanted Atenolol degradation. Under optimized electrochemical sensing conditions, the rGO@Ag-CPE sensor exhibited a linear dynamic range of 20-859 μM (R² = 0.9953), a low detection limit of 2.9 μM, and good reproducibility (relative standard deviation < 4.0 %). A validation study on real-world samples showed good atenolol recovery of 88.8-102% in natural waters and 97-99.2 % in pharmaceutical tablets.
- Open Access
- 25 September 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (1)
Scalable Fabrication of Electrochemical Sensors Via Inkjet Printing of Functionalized Graphene for Pesticide Detection
Nanomaterials are widely employed to enhance the performance of electrochemical sensors by modifying electrode surfaces. Traditionally, screen‐printed electrodes are manually coated with nanomaterial dispersions using the drop‐casting method, which suffers from poor reproducibility and limited reusability due to inconsistencies in deposition. This study introduces a novel electrochemical sensor based on nitrogen‐doped graphene acid (NGA), deposited via inkjet printing. This approach provides uniform, reproducible, and mechanically stable NGA coatings with significantly reduce material consumption (≈3 vs. ≈15 µg) compared to drop‐casting. The NGA‐modified electrodes exhibit enhanced electrochemical performance, as confirmed by a fourfold decrease in charge transfer resistance and a 2.5‐fold increase in current response. The sensor reliably detects imidacloprid, a common neonicotinoid pesticide, with excellent selectivity and long‐term stability exceeding 110 days. Inkjet printing enables precise material placement and layer control, ensuring strong adhesion and consistent performance even under mechanical stress and in complex matrices like tap water. This work demonstrates the potential of inkjet printing as a scalable and cost‐effective strategy for producing high‐performance electrochemical sensors.
- 25 September 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 11 (1)
Open AccessScalable Fabrication of Electrochemical Sensors Via Inkjet Printing of Functionalized Graphene for Pesticide Detection
Nanomaterials are widely employed to enhance the performance of electrochemical sensors by modifying electrode surfaces. Traditionally, screen‐printed electrodes are manually coated with nanomaterial dispersions using the drop‐casting method, which suffers from poor reproducibility and limited reusability due to inconsistencies in deposition. This study introduces a novel electrochemical sensor based on nitrogen‐doped graphene acid (NGA), deposited via inkjet printing. This approach provides uniform, reproducible, and mechanically stable NGA coatings with significantly reduce material consumption (≈3 vs. ≈15 µg) compared to drop‐casting. The NGA‐modified electrodes exhibit enhanced electrochemical performance, as confirmed by a fourfold decrease in charge transfer resistance and a 2.5‐fold increase in current response. The sensor reliably detects imidacloprid, a common neonicotinoid pesticide, with excellent selectivity and long‐term stability exceeding 110 days. Inkjet printing enables precise material placement and layer control, ensuring strong adhesion and consistent performance even under mechanical stress and in complex matrices like tap water. This work demonstrates the potential of inkjet printing as a scalable and cost‐effective strategy for producing high‐performance electrochemical sensors.
- Open Access
- 17 April 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (12)
Graphene Derivatives as Efficient Transducing Materials for Covalent Immobilization of Biocomponents in Electrochemical Biosensors
This review highlights the role of graphene derivatives in advancing electrochemical biosensors for applications in diagnostics, environmental monitoring, and industrial sensing. Graphene derivatives, including graphene oxide (GO), reduced GO, and wide range of graphenes prepared via fluorographene chemistry, represent a prominent class of transducing materials in electrochemical biosensor development. Their ability to support covalent immobilization of biocomponents ensures stability, specificity, and long‐term performance, addressing limitations of noncovalent methods. Advances in fabrication, such as laser‐assisted reduction, enable scalable and cost‐effective production of conductive graphene‐based electrodes. Covalent functionalization techniques, like carbodiimide coupling and click chemistry, facilitate integration with bioreceptors, leading to highly selective biosensors. Emerging approaches, including inkjet printing of graphene‐based inks onto eco‐friendly substrates, promise sustainable and portable diagnostic devices. These advances support biosensors aligned with modern and sustainable technologies. Future efforts must focus on scalable production, improved multiplexing, and environmental sustainability to fully harness the potential of graphene derivatives in electrochemical biosensors.
- 17 April 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (12)
Open AccessGraphene Derivatives as Efficient Transducing Materials for Covalent Immobilization of Biocomponents in Electrochemical Biosensors
This review highlights the role of graphene derivatives in advancing electrochemical biosensors for applications in diagnostics, environmental monitoring, and industrial sensing. Graphene derivatives, including graphene oxide (GO), reduced GO, and wide range of graphenes prepared via fluorographene chemistry, represent a prominent class of transducing materials in electrochemical biosensor development. Their ability to support covalent immobilization of biocomponents ensures stability, specificity, and long‐term performance, addressing limitations of noncovalent methods. Advances in fabrication, such as laser‐assisted reduction, enable scalable and cost‐effective production of conductive graphene‐based electrodes. Covalent functionalization techniques, like carbodiimide coupling and click chemistry, facilitate integration with bioreceptors, leading to highly selective biosensors. Emerging approaches, including inkjet printing of graphene‐based inks onto eco‐friendly substrates, promise sustainable and portable diagnostic devices. These advances support biosensors aligned with modern and sustainable technologies. Future efforts must focus on scalable production, improved multiplexing, and environmental sustainability to fully harness the potential of graphene derivatives in electrochemical biosensors.
- Open Access
- 20 March 2021
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 33 (4) , 925-929
Seasonal Assessment of Physico-Chemical Parameters and Water Quality Evaluation of Kune-Vaini Lagoon Complex, Lezha, Albania
The evaluation of the water quality of the Kune-Vain lagoon complex with regard to general physico-chemical and chemical parameters was the main focus of the present study. This evaluation was based on the requirement of Council Directive of 18 July 1978 on the “quality of fresh waters needing protection or improvement in order to support fish life”, [78/659/EEC] and the requirement of Council Directive of 3 November 1998 relating to the “quality of water intended for human consumption”, [98/83/EC]. Five sampling stations were selected to successfully perform the water monitoring on the Kune-Vaini lagoon complex with a frequency of every two months, from July, 2018- July, 2019. The parameters measured were temperature, pH, conductivity, salinity, DO, BOD, TDS, total hardness, Ca2+, Mg2+, Cl– and some heavy metals. The monitored lagoons have shown notable differences based on physico-chemical parameters.
- 20 March 2021
- Published by Asian Publication Corporation in Asian Journal of Chemistry
- Vol. 33 (4) , 925-929
Open AccessSeasonal Assessment of Physico-Chemical Parameters and Water Quality Evaluation of Kune-Vaini Lagoon Complex, Lezha, Albania
The evaluation of the water quality of the Kune-Vain lagoon complex with regard to general physico-chemical and chemical parameters was the main focus of the present study. This evaluation was based on the requirement of Council Directive of 18 July 1978 on the “quality of fresh waters needing protection or improvement in order to support fish life”, [78/659/EEC] and the requirement of Council Directive of 3 November 1998 relating to the “quality of water intended for human consumption”, [98/83/EC]. Five sampling stations were selected to successfully perform the water monitoring on the Kune-Vaini lagoon complex with a frequency of every two months, from July, 2018- July, 2019. The parameters measured were temperature, pH, conductivity, salinity, DO, BOD, TDS, total hardness, Ca2+, Mg2+, Cl– and some heavy metals. The monitored lagoons have shown notable differences based on physico-chemical parameters.
- 20 November 2018
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 43 (6) , e13838
Determination of catechol in extract of tea using carbon paste electrode modified with banana tissue
- 20 November 2018
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 43 (6) , e13838
Determination of catechol in extract of tea using carbon paste electrode modified with banana tissue
- 1 June 2016
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 228, 774-781
Electrochemical determination of histamine in fish sauce using heterogeneous carbon electrodes modified with rhenium(IV) oxide
- 1 June 2016
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 228, 774-781
Electrochemical determination of histamine in fish sauce using heterogeneous carbon electrodes modified with rhenium(IV) oxide
- 21 October 2014
- Published by Taylor & Francis in Toxicological & Environmental Chemistry
- Vol. 96 (9) , 1285-1293
Trace element atmospheric pollution in South Albania studied by the moss technique and inductively coupled plasma–atomic emission spectrometry
- 21 October 2014
- Published by Taylor & Francis in Toxicological & Environmental Chemistry
- Vol. 96 (9) , 1285-1293
Trace element atmospheric pollution in South Albania studied by the moss technique and inductively coupled plasma–atomic emission spectrometry
- 1 July 2007
- Published by Elsevier in Journal of Electroanalytical Chemistry
- Vol. 605 (1) , 73-76
SPR investigation of mercury reduction and oxidation on thin gold electrodes
- 1 July 2007
- Published by Elsevier in Journal of Electroanalytical Chemistry
- Vol. 605 (1) , 73-76
SPR investigation of mercury reduction and oxidation on thin gold electrodes