Julius Kewir Tangka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Julius Kewir Tangka has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Boris Merlain Djousse
Laboratoire des Energies Renouvelables Département du Génie Rural, Université de Dschang, Cameroun
1 shared publicationDjousse Kanouo Boris Merlain
Agricultural Engineering, Renewable Energy laboratory, Department of Agricultural Engineering, University of Dschang, Cameroon, Africa
1 shared publicationDontsa Tsafack Bertold Donald
Farm Power and Machinery, Agricultural Engineering, Renewable Energy laboratory, Department of Agricultural Engineering, University of Dschang, Cameroon, Africa
1 shared publication- Erol Gelenbe
Institute of Theoretical and Applied Informatics, Polish Academy of Sciences, Gliwice, Poland
1 shared publication - Godlove Suila Kuaban
Institute of Theoretical and Applied Informatics, Polish Academy of Sciences, Gliwice, Poland
1 shared publication John Ngansi Ngah
Department of Renewable Energy Laboratory, FASA, University of Dschang, Cameroon
1 shared publication
Latest Publications
- Open Access
- 6 October 2023
- Published by Centre de Developpement des Energie Renouvelables in Journal of Renewable Energies
- Vol. 22 (2) , 257-268
Caractérisation des vents induits par les véhicules en mouvement et évaluation de leur potentiel éolien
Cette étude a été menée au Cameroun dans le département de la Menoua, région de l’Ouest avec pour objectif une meilleure connaissance des vents induits par les véhicules en mouvement, ainsi que leurs potentiels énergétiques. Pour y parvenir, des données ont été collectées avec un anémomètre monté sur un véhicule, puis elles ont été analysées à l’aide de Microsoft Excel et du Logiciel SPSS 23. L’étude s’est intéressée à la variation de la vitesse du vent en fonction de celle du véhicule, de la position du capteur de l’anémomètre au tour du véhicule et ainsi que de l’altitude. Elle a révélé à son terme que, le vent induit par les véhicules en mouvement est un vent artificiel caractérisé par sa direction qui est unique et qui est toujours opposé au sens d’avancement du véhicule, sa vitesse qui dépend de la vitesse d’avancement du véhicule, qui varie tout autour de celui-ci (avec les positions avant et dessus présentant des avantages relatifs par rapport aux positions derrière et latérale basse) et qui est indépendante de l’altitude. Par rapport aux vents naturels, il présente l’avantage d’être plus stable et facile à prédire. Ce vent recèle également une immense quantité d’énergie dont la valorisation permettrait de développer plusieurs applications notamment dans le domaine de l’énergie des transports.
- 6 October 2023
- Published by Centre de Developpement des Energie Renouvelables in Journal of Renewable Energies
- Vol. 22 (2) , 257-268
Open AccessCaractérisation des vents induits par les véhicules en mouvement et évaluation de leur potentiel éolien
Cette étude a été menée au Cameroun dans le département de la Menoua, région de l’Ouest avec pour objectif une meilleure connaissance des vents induits par les véhicules en mouvement, ainsi que leurs potentiels énergétiques. Pour y parvenir, des données ont été collectées avec un anémomètre monté sur un véhicule, puis elles ont été analysées à l’aide de Microsoft Excel et du Logiciel SPSS 23. L’étude s’est intéressée à la variation de la vitesse du vent en fonction de celle du véhicule, de la position du capteur de l’anémomètre au tour du véhicule et ainsi que de l’altitude. Elle a révélé à son terme que, le vent induit par les véhicules en mouvement est un vent artificiel caractérisé par sa direction qui est unique et qui est toujours opposé au sens d’avancement du véhicule, sa vitesse qui dépend de la vitesse d’avancement du véhicule, qui varie tout autour de celui-ci (avec les positions avant et dessus présentant des avantages relatifs par rapport aux positions derrière et latérale basse) et qui est indépendante de l’altitude. Par rapport aux vents naturels, il présente l’avantage d’être plus stable et facile à prédire. Ce vent recèle également une immense quantité d’énergie dont la valorisation permettrait de développer plusieurs applications notamment dans le domaine de l’énergie des transports.
- Open Access
Modelling of the Energy Depletion Process and Battery Depletion Attacks for Battery-Powered Internet of Things (IoT) Devices
The Internet of Things (IoT) is transforming almost every industry, including agriculture, food processing, health care, oil and gas, environmental protection, transportation and logistics, manufacturing, home automation, and safety. Cost-effective, small-sized batteries are often used to power IoT devices being deployed with limited energy capacity. The limited energy capacity of IoT devices makes them vulnerable to battery depletion attacks designed to exhaust the energy stored in the battery rapidly and eventually shut down the device. In designing and deploying IoT devices, the battery and device specifications should be chosen in such a way as to ensure a long lifetime of the device. This paper proposes diffusion approximation as a mathematical framework for modelling the energy depletion process in IoT batteries. We applied diffusion or Brownian motion processes to model the energy depletion of a battery of an IoT device. We used this model to obtain the probability density function, mean, variance, and probability of the lifetime of an IoT device. Furthermore, we studied the influence of active power consumption, sleep time, and battery capacity on the probability density function, mean, and probability of the lifetime of an IoT device. We modelled ghost energy depletion attacks and their impact on the lifetime of IoT devices. We used numerical examples to study the influence of battery depletion attacks on the distribution of the lifetime of an IoT device. We also introduced an energy threshold after which the device’s battery should be replaced in order to ensure that the battery is not completely drained before it is replaced.
Open AccessModelling of the Energy Depletion Process and Battery Depletion Attacks for Battery-Powered Internet of Things (IoT) Devices
The Internet of Things (IoT) is transforming almost every industry, including agriculture, food processing, health care, oil and gas, environmental protection, transportation and logistics, manufacturing, home automation, and safety. Cost-effective, small-sized batteries are often used to power IoT devices being deployed with limited energy capacity. The limited energy capacity of IoT devices makes them vulnerable to battery depletion attacks designed to exhaust the energy stored in the battery rapidly and eventually shut down the device. In designing and deploying IoT devices, the battery and device specifications should be chosen in such a way as to ensure a long lifetime of the device. This paper proposes diffusion approximation as a mathematical framework for modelling the energy depletion process in IoT batteries. We applied diffusion or Brownian motion processes to model the energy depletion of a battery of an IoT device. We used this model to obtain the probability density function, mean, variance, and probability of the lifetime of an IoT device. Furthermore, we studied the influence of active power consumption, sleep time, and battery capacity on the probability density function, mean, and probability of the lifetime of an IoT device. We modelled ghost energy depletion attacks and their impact on the lifetime of IoT devices. We used numerical examples to study the influence of battery depletion attacks on the distribution of the lifetime of an IoT device. We also introduced an energy threshold after which the device’s battery should be replaced in order to ensure that the battery is not completely drained before it is replaced.
- 19 March 2021
- Published by Sciencedomain International in Current Journal of Applied Science and Technology
- p. 1-15
Development of a Computerized Automated System for Feed, Water and Sanitation Management in Animal Farms
Frequent visits into animal farms either for cleaning, feed or water dispensation are a possible means of viral, and bacteria propagation into and out of the farms. The need for these visits compels the farmer to live in the farm and devote considerable time to these activities. A well-controlled automatic feed dispensation/water management system can considerably reduce labor and prevent frequent farm visits. This can in turn promote social distancing especially during the outbreak of epidemics. A solar energy powered automatic system for feed, water dispensation and sanitation management was developed for animal farms. It was made up of an Arduino UNO board, a water level/or feed sensor, a DS1307 Real Time Clock (RTC), two potentiometers, a buffer, an sim900 mini v3, a relay module for Arduino, a display (LCD) for visual monitoring of events. It was programmed to periodically command electric motors to release a desired quantity of feed and water into different troughs as well as open hydraulic valves to spray a jet of high pressure water to clean the enclosure. Required data was fed into the program by the farmer depending on the daily needs which in turn depend on the animal species, age and husbandry requirements. The system communicated with the farmer through a GSM card after each operation. Initial tests of the prototype revealed minimum of 83.33% efficiencies for all the units. The module was able to report to the farmer minutes after completing each task. It was concluded that such a system can considerably reduce labor in animal farms as well as disease propagation.
- 19 March 2021
- Published by Sciencedomain International in Current Journal of Applied Science and Technology
- p. 1-15
Development of a Computerized Automated System for Feed, Water and Sanitation Management in Animal Farms
Frequent visits into animal farms either for cleaning, feed or water dispensation are a possible means of viral, and bacteria propagation into and out of the farms. The need for these visits compels the farmer to live in the farm and devote considerable time to these activities. A well-controlled automatic feed dispensation/water management system can considerably reduce labor and prevent frequent farm visits. This can in turn promote social distancing especially during the outbreak of epidemics. A solar energy powered automatic system for feed, water dispensation and sanitation management was developed for animal farms. It was made up of an Arduino UNO board, a water level/or feed sensor, a DS1307 Real Time Clock (RTC), two potentiometers, a buffer, an sim900 mini v3, a relay module for Arduino, a display (LCD) for visual monitoring of events. It was programmed to periodically command electric motors to release a desired quantity of feed and water into different troughs as well as open hydraulic valves to spray a jet of high pressure water to clean the enclosure. Required data was fed into the program by the farmer depending on the daily needs which in turn depend on the animal species, age and husbandry requirements. The system communicated with the farmer through a GSM card after each operation. Initial tests of the prototype revealed minimum of 83.33% efficiencies for all the units. The module was able to report to the farmer minutes after completing each task. It was concluded that such a system can considerably reduce labor in animal farms as well as disease propagation.
- 31 December 2020
- Published by Sciencedomain International in Journal of Advances in Biology & Biotechnology
- p. 9-22
Comparative Analysis of Biodiesel Production from Five Varieties of Castor Beans
A comparative study was conducted to estimate biodiesel productivity of five varieties of castor beans: Ricinus communis zanzibariensis {white black} (castor 1), Ricinus communis sanguineus (castor 2), Ricinus communis carmencita (castor 3), Ricinus communis zanzibariensis {dark black} (castor 4) and Ricinus communis {black Tanzania}(castor 5). The castor beans were preheated to a temperature between 22 and 33 ° C and then pressed with a manual hydraulic press, under 170 bars. The oil obtained was subjected to the transesterification reaction with methanol (99.98% pure) in a proportion of 5: 1 in the presence of sodium hydroxide as a catalyst (10,672g) for 02 hours at temperature between 60 and 70 °C. Purification was performed by reacting the methyl ester formed with heated water (55 °C) and acetic acid. The density, the kinematic viscosity at 21 ° C and the proportion of residual soap were determined later. The results for five castor varieties showed that the oil yields varied from 24 to 26.96 %; the volume of methyl ester was higher with castor 4 and lower with castor 5 but there was no significant difference in the biodiesel yields. Castor 2 has the best yield of biodiesel (93.5%), followed by castor 5 (92.5%), castor 3 (91%), castor 1 (90.75 %) and castor 4 (90%). Therefore castor oil 2 has a better potential for biodiesel production.
- 31 December 2020
- Published by Sciencedomain International in Journal of Advances in Biology & Biotechnology
- p. 9-22
Comparative Analysis of Biodiesel Production from Five Varieties of Castor Beans
A comparative study was conducted to estimate biodiesel productivity of five varieties of castor beans: Ricinus communis zanzibariensis {white black} (castor 1), Ricinus communis sanguineus (castor 2), Ricinus communis carmencita (castor 3), Ricinus communis zanzibariensis {dark black} (castor 4) and Ricinus communis {black Tanzania}(castor 5). The castor beans were preheated to a temperature between 22 and 33 ° C and then pressed with a manual hydraulic press, under 170 bars. The oil obtained was subjected to the transesterification reaction with methanol (99.98% pure) in a proportion of 5: 1 in the presence of sodium hydroxide as a catalyst (10,672g) for 02 hours at temperature between 60 and 70 °C. Purification was performed by reacting the methyl ester formed with heated water (55 °C) and acetic acid. The density, the kinematic viscosity at 21 ° C and the proportion of residual soap were determined later. The results for five castor varieties showed that the oil yields varied from 24 to 26.96 %; the volume of methyl ester was higher with castor 4 and lower with castor 5 but there was no significant difference in the biodiesel yields. Castor 2 has the best yield of biodiesel (93.5%), followed by castor 5 (92.5%), castor 3 (91%), castor 1 (90.75 %) and castor 4 (90%). Therefore castor oil 2 has a better potential for biodiesel production.
- Open Access
- 1 April 2006
- Published by Oxford University Press (OUP) in International Journal of Low-Carbon Technologies
- Vol. 1 (2) , 127-138
Development of a simple intermittent absorption solar refrigeration system
A simple solar energy powered intermittent absorption refrigeration system was designed, fabricated and tested. The system uses a generator charged with ammonia and water. The heat source is a solar radiation collector that collects and radiates solar thermal energy onto a black body generator. The generator drives the refrigerant around the system through a condenser and an evaporator. The system was evaluated by leaving it outside under solar radiation and monitoring temperatures at various points inside the collector, the generator, and the evaporator through the use of thermocouple sensors. The average highest and lowest temperatures inside the solar collector were 100°C and 40°C respectively. The average lowest refrigeration temperature was 4°C. The coefficient of performance (COP) of the system was estimated at 0.487.
- 1 April 2006
- Published by Oxford University Press (OUP) in International Journal of Low-Carbon Technologies
- Vol. 1 (2) , 127-138
Open AccessDevelopment of a simple intermittent absorption solar refrigeration system
A simple solar energy powered intermittent absorption refrigeration system was designed, fabricated and tested. The system uses a generator charged with ammonia and water. The heat source is a solar radiation collector that collects and radiates solar thermal energy onto a black body generator. The generator drives the refrigerant around the system through a condenser and an evaporator. The system was evaluated by leaving it outside under solar radiation and monitoring temperatures at various points inside the collector, the generator, and the evaporator through the use of thermocouple sensors. The average highest and lowest temperatures inside the solar collector were 100°C and 40°C respectively. The average lowest refrigeration temperature was 4°C. The coefficient of performance (COP) of the system was estimated at 0.487.