SVSreejith Olakkil Veedu

Sreejith Olakkil Veedu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sreejith Olakkil Veedu has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High cyclic reversibility in eutectic lithium calcium anodes characterised by electron microscopy

    by Ed Darnbrough, Sreejith Olakkil Veedu, Zhuojun Hou, Myra Ng, Jack Aspinall, Chris Grovenor, Peter D. Nellist, David E. J. Armstrong

    Lithium metal is the benchmark anode for lithium-ion battery technology with high theoretical energy density and capacity. However, dendrite formation and solid electrolyte interphase formation limit the practical current density and lifetime, respectively. This study investigates how a lithium–calcium alloy can overcome these challenges by fabricating a simple to manufacture anode made of two phases in a 3D structure. Exploration with different electrolytes and electron microscopy highlights the role the calcium intermetallic plays in lithium cycling. The charge transfer resistance of electrolytes is 255 Ohms for LiTFSI and 315 Ohms for LiPF6. The overpotential value of both electrolytes within a symmetric eutectic anode cell is 0.06 V for LiTFSI compared to 0.26 V for LiPF6, highlighting that the electrolyte can alter the deposition mechanism not just the total cell resistance. We conclude that both the current density and long term cycling performance are improved versus lithium metal anodes, as the 3D Li–Ca matrix can suppress volume changes during cycling and remove the need for lithium metal to be present at the interface with the electrolyte, thereby reducing side reactions.

  • Open Access

    Enhanced kinetics in Cu-doped LiFePO4 cathodes due to local structural disorder

    by Dharmendra Kumar, A. Tripathy, Manju Sharma, S. R. Sahu, Samanway Mohanta, Ashutosh Anand, Sreejith O. V, Ramaswamy Murugan, Sanjay Singh, Rajamani Raghunathan, et al.


  • Lithium–Lithium Titanate Composite Anode for Semi-Solid-State Lithium–Sulfur Batteries

    by Sona Elsin Abraham, Ramaswamy Murugan, Sreejith Olakkil Veedu

    Lithium-sulfur batteries have attracted significant attention recently as sulfur is one of the most abundant elements in the earth's crust, low-cost, has a non-toxic nature, multi-electron transfer property coupled with its remarkable theoretical specific capacity of 1672 mAh g-1 and energy density of 2600 Wh kg-1. However, lithium-deficient sulfur cathodes associated with lithium metal anodes together to face challenges, such as significant volume expansion during cycling, dendrite formation, and polysulfide shuttling effect from the sulfur cathodes, leading to corrosion, all of which negatively impact the cycle lifespan of the battery. On the other hand, moving away from liquid to solid-state garnet-based solid electrolytes is highly aided for lithium-sulfur batteries because of their high ionic conductivity of 10-3 S cm-1, stability with lithium metal, lithium-based alloys and moreover in mitigating the polysulfide issues. The particular lithium-sulfur solid-state batteries still possess intense lithium metallic anode issues. Utilizing a composite anode constructively addresses the significant interfacial resistance arising from the solid-solid contact issues, making it an excellent solution for the interfacial issues and helps in minimizing the volume expansion of the lithium metal during the charge-discharge. Successful attempts have been made on associating the lithium metal with lithium titanate composite anodes, but its full potential can be expected with high-capacity cathodes, like sulfur, as such combinations have not yet been explored. Here a full cell study using a polyacrylonitrile sulfur (PANS) cathode with a lithium-lithium titanate (Li-LTO) composite anode was compared to a pure lithium-metal-based anode at 0.2 C for more than 150 cycles with an improved discharge capacity retention observed over these cycles for a Li-LTO composite-based cell, whereas the pure lithium-sulfur (Li-S) cell loses complete discharge capacity at around 100 cycles.


  • One Precursor, Two Different Outcomes: SnO-Graphite Composite and Anion-Doped SnO2 with Ester Surface Functionality

    by Neetu Yadav, Sreejith Olakkil Veedu, Murugan Ramaswamy, Rajamani Nagarajan

    The technological importance of SnO2 and SnO has invited scientists to explore various aspects, including their synthesis in the nanosize regime, surface functionalization, and composite formation. In the present work, a binuclear Sn2-EDTA complex has been demonstrated to produce a SnO-graphite composite and C, N-codoped SnO2 nanocrystals with ester functionality in quantitative yields by thermal and solvothermal dissociation processes. The products were characterized extensively. While SnO in the SnO-graphite composite exhibited tetragonal symmetry, graphitic carbon had defects. The composite had 12 wt % of graphitic carbon. The role of the SnO-graphite composite as an anode in lithium-ion batteries (LIB) has been evaluated. Solvothermal dissociation of the Sn2-EDTA complex in a propylene glycol medium yielded nanocrystalline SnO2 with yellow color. Agglomerated crystallites had ester functionality on their surfaces. The surface functionality was thermally stable up to 200 °C, and its complete removal yielded tetragonal white-colored SnO2. Co-doping of carbon and nitrogen in yellow SnO2 reduced its optical band gap (2.9 eV). Despite the negative surface charge of the functionalized SnO2, its affinity to rapidly adsorb anionic azo dyes (Congo red and Eriochrome black T) from aqueous solutions has been validated. Following pseudo-second-order kinetics, adsorption data analysis revealed chemisorption as the primary driving force in this process.


  • Highly stable all-solid-state batteries with Li–LTO composite anode

    by Thamayanthi Panneerselvam, R. Murugan, O. V. Sreejith

    Garnet-structured solid electrolytes have been widely examined owing to their good stability with metallic lithium, wide electrochemical potential window, high lithium ionic conductivity, and easy synthesis. One of the primary challenges in establishing solid-state electrolytes is the high resistance arising from the poor contact between the rigid solid–solid type electrode–electrolyte interface, which limits efficient battery operation. To address these challenges, we demonstrate the potential of a lithium–lithium titanate (Li4Ti5O12; Li–LTO) composite anode for use as an alternative to the metallic lithium anode in all-solid-state batteries. The reaction that takes place between the lithium metal and lithium titanate changes the physical properties of the anode and makes it physically and electrochemically compatible with the garnet solid electrolyte. The wettability of the anode with garnet electrolyte is effectively enhanced by partial titanium reduction that occurs in the composite of Li–LTO. As a result, there is a drastic decrease in the areal-specific resistance from 371 to 21 Ω cm2 for the pure metallic lithium anode and composite anode, respectively. The symmetric cell with composite anode demonstrated a high critical current density of 0.8 mA cm−2. The cycling stability of the composite anode was illustrated by symmetric cell cycling for 3000 hours at 0.1 mA cm−2 without a short circuit. The full cell with Li–LTO composite anode and lithium iron phosphate cathode displays stable cycling performance with good capacity retention.


  • Quasi-2D Bi 0.775 Ln 0.225 O 1.5 (Ln = La, Pr, Nd, Sm, Eu): reversible iodine intercalation and their evaluation as the anode in the lithium-ion battery system

    by Priyanka Yadav, Shivangi Rao, O. V. Sreejith, Ramaswamy Murugan, Rajamani Nagarajan

    Layered materials with a robust structure and reversible intercalation behavior are highly sought-after in applications involving energy conversion and storage systems, energy converting devices, supercapacitors, batteries, superconductors, photonic materials, and catalysis involving hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), solar cells and sensors. In the current study, quasi-2D rhombohedral Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples, synthesized by a solution combustion route, have been demonstrated to intercalate iodine reversibly. A solid–vapor reaction was employed to intercalate iodine at moderate temperatures, and deintercalation occurred on heating at higher temperatures. Expansion of the rhombohedral c-axis by ∼10 Å occurred, and the iodine between the interlayers existed as triiodide ions (I3 −) in an unsymmetrical fashion. The amount of intercalated iodide has been determined from thermogravimetric analysis. Electron microscopic analysis confirmed these systems’ intercalation and subsequent lattice expansion. In the diffuse reflectance spectra, charge transfer from the triiodide ions to the host oxide was noticed, and it caused the absorption edge to fall beyond the visible region for the intercalated samples. XPS analysis of iodine intercalated Bi0.775Pr0.225O1.5 has shown the mixed valence states for Pr and the existence of I3 − along with some IO3 − species. The quasi-2D structure was stable during the thermal deintercalation process. The evaluation of iodine intercalated Bi0.775Ln0.225O1.5 (Ln = La, Pr, Nd, Sm, and Eu) samples as anode material in the lithium-ion battery system has given quite promising results, exhibiting fast Li+-ion diffusion, low charge transfer resistance, good reversible capacity, capacity retention (after cycling back to 10 mA g−1), and structural stability (after long cycles).


  • 3D Flexible Electrospun Nanocomposite Polymer Electrolyte Based on Li1.45Al0.45Ge0.2Ti1.35(PO4)3 for Lithium Metal Batteries

    by Thamayanthi Panneerselvam, Ramaswamy Murugan, Sreejith O V, Moulisvar M, Sona Elsin Abraham


  • Cross-Linked Polymer Composite Electrolyte Incorporated with Waste Seashell Based Nanofiller for Lithium Metal Batteries

    by Pandurangan Swathi, Sreejith O. V., Thamayanthi Panneerselvam, Ramaswamy Murugan, Arun Prasath Ramaswamy


  • An insight into lithium-ion transport in germanium-doped lithium titanate anode through NMR spectroscopy and post-carbonization for anode applications in lithium-ion battery

    by Sreejith O. V., Arunkumar Dorai, Junichi Kawamura, Murugan Ramaswamy

    Adapting toward lithium titanate as a negative electrode for lithium-ion batteries led to the safest and long-lasting battery technology, especially for electric vehicle applications. However, the poor conductivity and lithium-ion diffusion of lithium titanate have to be addressed for widespread usage in next-generation E-mobility. The lithium-ion motion inside lithium titanate and germanium-doped lithium titanate was investigated through pulsed-field gradient nuclear magnetic resonance spectroscopy and temperature-dependent ionic conductivity studies. The superior charge carrier mobility of germanium enhanced the lithium-ion diffusion in lithium titanate significantly to 1.48 × 10−8 cm2 s−1 in Li4Ge0.1Ti4.9O12 at 500 °C. While germanium improves the ionic diffusion, an ex situ carbon coating was adapted over the sample for electronic conductivity enhancement. Samples with two different carbon contents (5 and 10 wt. %) were examined for electrochemical analysis. Significant improvements in battery performance were observed on carbon-coated germanium-doped lithium titanate. The carbon-coated sample gave superior initial performance (191 and 178 mAh g−1 for 10 and 5 wt. % carbon at 0.1C) than the pristine lithium titanate and preserved the exceptional capacity retention over a thousand cycles at 1C rate.