Alessandro Berselli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alessandro Berselli has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Fabio Benfenati
Center for Synaptic Neuroscience and Technology, Istituto Italiano di Tecnologia, Genoa, Italy
8 shared publications - Luca Maragliano
Center for Synaptic Neuroscience and Technology (NSYN@UniGe), Istituto Italiano di Tecnologia, Largo Rosanna Benzi, 10, 16132 Genova, Italy
8 shared publications - Giulio Alberini
Center for Synaptic Neuroscience and Technology, Istituto Italiano di Tecnologia, Genova 16132, Italy; IRCCS Azienda Ospedaliera Metropolitana, Genova 16132, Italy
7 shared publications - Maria Cristina Menziani
University of Modena and Reggio Emilia
6 shared publications - Francesco Muniz-Miranda
University of Modena and Reggio Emilia
4 shared publications Agnese Roscioni
Center for Synaptic Neuroscience and Technology, Istituto Italiano di Tecnologia, Genova 16132, Italy
2 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
The eventful journey of a ligand in and out of the binding site
The route a ligand follows to reach and leave a protein binding site typically involves complex molecular mechanisms that shape its efficacy as a biologically active compound. These mechanisms are reflected in the binding and unbinding kinetics, which often predict biological activity better than binding affinity alone, yet their calculation remains a bottleneck in ligand characterization. Here, we propose an approach that combines committor-based enhanced sampling with spectral analysis of the infinitesimal generator to characterize in detail how a ligand reaches the binding site of a protein and is eventually expelled. Applied to the paradigmatic benzamidine (BEN)–trypsin complex and the congeneric para-amino benzamidine (PAB), this framework reveals distinct and multifaceted binding pathways for the two ligands, uncovering a previously uncharacterized BEN binding site that competes with the crystallographic site, while identifying a common rotational bottleneck for unbinding. The computed unbinding free energies closely agree with experimental measurements. The spectral decomposition of the infinitesimal generator provides access to the slow dynamical modes of the system. From the slowest mode, we derive residence times and kinetic rate constants that agree with available experimental data and with independent OPES flooding simulations, while requiring substantially less computational effort. This approach offers a privileged perspective to resolve the complexity of protein–ligand binding-unbinding process, with potential applications to ligand screening and the characterization of multiple binding sites.
- 22 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe eventful journey of a ligand in and out of the binding site
The route a ligand follows to reach and leave a protein binding site typically involves complex molecular mechanisms that shape its efficacy as a biologically active compound. These mechanisms are reflected in the binding and unbinding kinetics, which often predict biological activity better than binding affinity alone, yet their calculation remains a bottleneck in ligand characterization. Here, we propose an approach that combines committor-based enhanced sampling with spectral analysis of the infinitesimal generator to characterize in detail how a ligand reaches the binding site of a protein and is eventually expelled. Applied to the paradigmatic benzamidine (BEN)–trypsin complex and the congeneric para-amino benzamidine (PAB), this framework reveals distinct and multifaceted binding pathways for the two ligands, uncovering a previously uncharacterized BEN binding site that competes with the crystallographic site, while identifying a common rotational bottleneck for unbinding. The computed unbinding free energies closely agree with experimental measurements. The spectral decomposition of the infinitesimal generator provides access to the slow dynamical modes of the system. From the slowest mode, we derive residence times and kinetic rate constants that agree with available experimental data and with independent OPES flooding simulations, while requiring substantially less computational effort. This approach offers a privileged perspective to resolve the complexity of protein–ligand binding-unbinding process, with potential applications to ligand screening and the characterization of multiple binding sites.
- Open Access
- 14 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
The eventful journey of a ligand in and out of the binding site
The route a ligand follows to reach and leave a protein binding site typically involves complex molecular mechanisms that shape its efficacy as a biologically active compound. These mechanisms are reflected in the binding and unbinding kinetics, which often predict biological activity better than binding affinity alone, yet their calculation remains a bottleneck in ligand characterization. Here, we propose an approach that combines committor-based enhanced sampling with spectral analysis of the infinitesimal generator to characterize in detail how a ligand reaches the binding site of a protein and is eventually expelled. Applied to the paradigmatic benzamidine (BEN)–trypsin complex and the congeneric para-amino benzamidine (PAB), this framework reveals distinct and multifaceted binding pathways for the two ligands, uncovering a previously uncharacterized BEN binding site that competes with the crystallographic site, while identifying a common rotational bottleneck for unbinding. The computed unbinding free energies closely agree with experimental measurements. The spectral decomposition of the infinitesimal generator provides access to the slow dynamical modes of the system. From the slowest mode, we derive residence times and kinetic rate constants that agree with available experimental data and with independent OPES flooding simulations, while requiring substantially less computational effort. This approach offers a privileged perspective to resolve the complexity of protein–ligand binding-unbinding process, with potential applications to ligand screening and the characterization of multiple binding sites.
- 14 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe eventful journey of a ligand in and out of the binding site
The route a ligand follows to reach and leave a protein binding site typically involves complex molecular mechanisms that shape its efficacy as a biologically active compound. These mechanisms are reflected in the binding and unbinding kinetics, which often predict biological activity better than binding affinity alone, yet their calculation remains a bottleneck in ligand characterization. Here, we propose an approach that combines committor-based enhanced sampling with spectral analysis of the infinitesimal generator to characterize in detail how a ligand reaches the binding site of a protein and is eventually expelled. Applied to the paradigmatic benzamidine (BEN)–trypsin complex and the congeneric para-amino benzamidine (PAB), this framework reveals distinct and multifaceted binding pathways for the two ligands, uncovering a previously uncharacterized BEN binding site that competes with the crystallographic site, while identifying a common rotational bottleneck for unbinding. The computed unbinding free energies closely agree with experimental measurements. The spectral decomposition of the infinitesimal generator provides access to the slow dynamical modes of the system. From the slowest mode, we derive residence times and kinetic rate constants that agree with available experimental data and with independent OPES flooding simulations, while requiring substantially less computational effort. This approach offers a privileged perspective to resolve the complexity of protein–ligand binding-unbinding process, with potential applications to ligand screening and the characterization of multiple binding sites.
- Open Access
PETase learns from LCC: Redesigning enzymatic reactivity with probability-based simulations
- Open Access
- 27 December 2025
- Published by Wiley in Protein Science
- Vol. 35 (1) , e70386
The effect of ionic strength on PETase enzymes: An experimental and computational study
Over recent decades, various enzymes capable of breaking down polyethylene terephthalate (PET) have emerged as sustainable tools for plastic waste management. Among them, IsPETase from Ideonella sakaiensis 201‐f6 stands out for its high catalytic activity at low temperatures. However, the discovery of the PETase‐like enzyme from the marine sponge Streptomyces sp. SM14 (PETaseSM14) has introduced a new class of biocatalysts active at high‐salt concentrations, whose structural and catalytic properties remain poorly understood. This study explores the structural and catalytic behavior of both IsPETase and PETaseSM14 under varying ionic strength (from 150 to 900 mM of NaCl concentration) using all‐atom molecular dynamics simulations and in vitro assays. Results reveal that the flexible, enlarged binding site of IsPETase improves substrate accommodation but also causes catalytic residue displacement and rapid deactivation, particularly under high‐salt conditions. In contrast, PETaseSM14 has a smaller, more rigid binding pocket that undergoes moderate widening upon salt concentration increasing, thus promoting water and substrate recruitment. Additionally, active forms of both enzymes bind PET chains in conformations similar to those found in amorphous PET. These findings offer key structural insights that can inform future enzyme engineering efforts for effective PET degradation tailored to diverse environmental conditions.
- 27 December 2025
- Published by Wiley in Protein Science
- Vol. 35 (1) , e70386
Open AccessThe effect of ionic strength on PETase enzymes: An experimental and computational study
Over recent decades, various enzymes capable of breaking down polyethylene terephthalate (PET) have emerged as sustainable tools for plastic waste management. Among them, IsPETase from Ideonella sakaiensis 201‐f6 stands out for its high catalytic activity at low temperatures. However, the discovery of the PETase‐like enzyme from the marine sponge Streptomyces sp. SM14 (PETaseSM14) has introduced a new class of biocatalysts active at high‐salt concentrations, whose structural and catalytic properties remain poorly understood. This study explores the structural and catalytic behavior of both IsPETase and PETaseSM14 under varying ionic strength (from 150 to 900 mM of NaCl concentration) using all‐atom molecular dynamics simulations and in vitro assays. Results reveal that the flexible, enlarged binding site of IsPETase improves substrate accommodation but also causes catalytic residue displacement and rapid deactivation, particularly under high‐salt conditions. In contrast, PETaseSM14 has a smaller, more rigid binding pocket that undergoes moderate widening upon salt concentration increasing, thus promoting water and substrate recruitment. Additionally, active forms of both enzymes bind PET chains in conformations similar to those found in amorphous PET. These findings offer key structural insights that can inform future enzyme engineering efforts for effective PET degradation tailored to diverse environmental conditions.
- Open Access
- 27 August 2025
- Published by Wiley in Protein Science
- Vol. 34 (9) , e70271
A multi‐pore model of the blood–brain barrier tight junction strands recapitulates the permeability features of wild‐type and mutant claudin‐5
In the blood–brain barrier (BBB), endothelial cells are joined by tight junctions (TJs), multi‐protein assemblies that seal the paracellular space and restrict molecular transport. Among the BBB TJ proteins, Claudin‐5 (Cldn5) is the most abundant one. Structural models for claudin complexes, first introduced for channel‐forming, selectively permeable claudins, comprise protomers arranged to form paracellular pores that regulate transport by electrostatic and/or steric effects arising from pore‐lining residues. With limited exceptions, computational studies explored oligomers of only a few subunits, while TJs are formed by extended polymeric strands. Here, we employ multi‐microsecond all‐atom molecular dynamics and free‐energy (FE) calculations to study two distinct models of TJ‐forming Cldn5 complexes, called multi‐Pore I and multi‐Pore II, each comprising 16 protomers arranged around three adjacent pores. FE calculations of water and ions permeation reveal that, in both models, ion transport is hindered by FE barriers higher than in single pores. Moreover, only the multi‐Pore I model captures the Cldn5 G60R variant's effect, making it anion‐permeable. The results provide insights into Cldn5 structure and function and validate a structural model of BBB TJs useful for studying barrier impairment in brain diseases and for developing therapeutic approaches.
- 27 August 2025
- Published by Wiley in Protein Science
- Vol. 34 (9) , e70271
Open AccessA multi‐pore model of the blood–brain barrier tight junction strands recapitulates the permeability features of wild‐type and mutant claudin‐5
In the blood–brain barrier (BBB), endothelial cells are joined by tight junctions (TJs), multi‐protein assemblies that seal the paracellular space and restrict molecular transport. Among the BBB TJ proteins, Claudin‐5 (Cldn5) is the most abundant one. Structural models for claudin complexes, first introduced for channel‐forming, selectively permeable claudins, comprise protomers arranged to form paracellular pores that regulate transport by electrostatic and/or steric effects arising from pore‐lining residues. With limited exceptions, computational studies explored oligomers of only a few subunits, while TJs are formed by extended polymeric strands. Here, we employ multi‐microsecond all‐atom molecular dynamics and free‐energy (FE) calculations to study two distinct models of TJ‐forming Cldn5 complexes, called multi‐Pore I and multi‐Pore II, each comprising 16 protomers arranged around three adjacent pores. FE calculations of water and ions permeation reveal that, in both models, ion transport is hindered by FE barriers higher than in single pores. Moreover, only the multi‐Pore I model captures the Cldn5 G60R variant's effect, making it anion‐permeable. The results provide insights into Cldn5 structure and function and validate a structural model of BBB TJs useful for studying barrier impairment in brain diseases and for developing therapeutic approaches.
- Open Access
- 16 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
The effect of ionic strength on PETase enzymes: an experimental and computational study
In the last decades, several enzymes capable of hydrolyzing polyethylene terephthalate (PET) under different conditions have been discovered, offering innovative and sustainable solutions for managing plastic waste in the ecosystems. The PETase enzyme from Ideonella Sakaiensis 201-f6 (IsPETase) exerts outstanding catalytic activity at low temperatures, making it the most extensively studied PET-active enzyme of the recent period. However, the discovery of the PETase-like enzyme from the marine-sponge Streptomyces sp. SM14 (PETaseSM14) has introduced a new class of biocatalysts active at high-salt concentrations, whose structural and catalytic properties remain poorly understood. In this investigation, we employ all-atom molecular dynamics (MD) simulations and in-vitro activity assays to highlight the structural and functional characteristics of PETaseSM14 and IsPETase at different NaCl concentrations (150 mM and 900 mM). The results of molecular simulations corroborate the findings from in-vitro activity assays on PET films. They show that, due to loop elongation, IsPETase exhibits a flexible and wide binding site that facilitates substrate accommodation. However, this feature leads to the displacement of catalytic residues and the deactivation of the enzyme, which occurs faster at a high-salt concentration. In contrast, PETaseSM14 exhibits a rigid and smaller binding pocket, which undergoes moderate widening upon salt concentration increasing, thus promoting water and substrate recruitment. Moreover, the assessment of the enzyme adsorption onto a PET slab showed that PETaseSM14, under high-salt conditions, and IsPETase, under low-salt conditions, bind the substrate chains in the same trans:gauche conformational distribution as that found in the amorphous PET sample. Our findings provide novel structural details to guide enzyme engineering tailored to diverse environmental conditions.
- 16 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe effect of ionic strength on PETase enzymes: an experimental and computational study
In the last decades, several enzymes capable of hydrolyzing polyethylene terephthalate (PET) under different conditions have been discovered, offering innovative and sustainable solutions for managing plastic waste in the ecosystems. The PETase enzyme from Ideonella Sakaiensis 201-f6 (IsPETase) exerts outstanding catalytic activity at low temperatures, making it the most extensively studied PET-active enzyme of the recent period. However, the discovery of the PETase-like enzyme from the marine-sponge Streptomyces sp. SM14 (PETaseSM14) has introduced a new class of biocatalysts active at high-salt concentrations, whose structural and catalytic properties remain poorly understood. In this investigation, we employ all-atom molecular dynamics (MD) simulations and in-vitro activity assays to highlight the structural and functional characteristics of PETaseSM14 and IsPETase at different NaCl concentrations (150 mM and 900 mM). The results of molecular simulations corroborate the findings from in-vitro activity assays on PET films. They show that, due to loop elongation, IsPETase exhibits a flexible and wide binding site that facilitates substrate accommodation. However, this feature leads to the displacement of catalytic residues and the deactivation of the enzyme, which occurs faster at a high-salt concentration. In contrast, PETaseSM14 exhibits a rigid and smaller binding pocket, which undergoes moderate widening upon salt concentration increasing, thus promoting water and substrate recruitment. Moreover, the assessment of the enzyme adsorption onto a PET slab showed that PETaseSM14, under high-salt conditions, and IsPETase, under low-salt conditions, bind the substrate chains in the same trans:gauche conformational distribution as that found in the amorphous PET sample. Our findings provide novel structural details to guide enzyme engineering tailored to diverse environmental conditions.
- Open Access
- 6 June 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (12) , 10702-10721
Molecular-Level Mechanistic Insights into PETase-Catalyzed Plastics Hydrolysis from Accurate QM/MM Free Energy Calculations
- 6 June 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (12) , 10702-10721
Open AccessMolecular-Level Mechanistic Insights into PETase-Catalyzed Plastics Hydrolysis from Accurate QM/MM Free Energy Calculations
- Open Access
- 12 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Molecular-Level Mechanistic Insights into PETase-Catalyzed Plastics Hydrolysis from Accurate QM/MM Free Energy Calculations
The enzyme PETase is capable of depolymerizing plastics such as polyethylene terephthalate (PET) at moderate temperatures and demonstrated even higher activity towards polyethylene -2,5- furan dicarboxylate (PEF), opening promising routes for the sustainable upcycling of plastic wastes. To fully exploit the potential of these biocatalytic systems, an atomistically detailed mechanistic understanding of their activity is pivotal. To this end, this study sheds light on two fundamental stages of the catalytic cycle of PET and PEF hydrolysis by PETase—acylation and deacylation—using hybrid QM/MM enhanced sampling molecular dynamics (MD) simulations to capture all relevant dynamic effects. Well-tempered metadynamics simulations at the DFTB3 level are performed along collective variables optimized via linear discriminant analysis, a supervised learning-assisted approach that accounts for the contributions of each potentially relevant degree of freedom. The free energy (FE) profiles indicate that the acylation stage is the rate-limiting step for both PET and PEF degradation, with barriers ≈ 8 kcal/mol and ≈ 4 kcal/mol higher than those obtained for the deacylation step, respectively. Remarkably, substantial mechanistic differences are found. While PET acylation occurs in a concerted manner, with a single energy barrier of ≈ 21 kcal/mol, PEF acylation follows a two-step mechanism where after the first barrier, ≈ 10 kcal/mol high, a metastable intermediate state is formed, which then evolves towards the product once a second barrier of ≈ 2 kcal/mol is overcome. This mechanistic description is consistent with the FE profiles obtained at higher levels of theory (PBE, B3LYP, RI-MP2) via FE perturbation, thus validating the key insights elucidated by metadynamics simulations. Finally, both global and local reactivity descriptors derived from conceptual density functional theory (DFT) suggest that PEF is more electrophilic and susceptible to nucleophilic attack than PET. The results obtained by means of the robust computational protocol adopted here offer for the first time thermodynamic and mechanistic insights into PET and PEF hydrolysis by PETase at the molecular level. This work elucidates the experimentally observed enhanced activity of this enzyme toward PEF, paving the way for further exploration of biocatalytic plastic recycling.
- 12 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMolecular-Level Mechanistic Insights into PETase-Catalyzed Plastics Hydrolysis from Accurate QM/MM Free Energy Calculations
The enzyme PETase is capable of depolymerizing plastics such as polyethylene terephthalate (PET) at moderate temperatures and demonstrated even higher activity towards polyethylene -2,5- furan dicarboxylate (PEF), opening promising routes for the sustainable upcycling of plastic wastes. To fully exploit the potential of these biocatalytic systems, an atomistically detailed mechanistic understanding of their activity is pivotal. To this end, this study sheds light on two fundamental stages of the catalytic cycle of PET and PEF hydrolysis by PETase—acylation and deacylation—using hybrid QM/MM enhanced sampling molecular dynamics (MD) simulations to capture all relevant dynamic effects. Well-tempered metadynamics simulations at the DFTB3 level are performed along collective variables optimized via linear discriminant analysis, a supervised learning-assisted approach that accounts for the contributions of each potentially relevant degree of freedom. The free energy (FE) profiles indicate that the acylation stage is the rate-limiting step for both PET and PEF degradation, with barriers ≈ 8 kcal/mol and ≈ 4 kcal/mol higher than those obtained for the deacylation step, respectively. Remarkably, substantial mechanistic differences are found. While PET acylation occurs in a concerted manner, with a single energy barrier of ≈ 21 kcal/mol, PEF acylation follows a two-step mechanism where after the first barrier, ≈ 10 kcal/mol high, a metastable intermediate state is formed, which then evolves towards the product once a second barrier of ≈ 2 kcal/mol is overcome. This mechanistic description is consistent with the FE profiles obtained at higher levels of theory (PBE, B3LYP, RI-MP2) via FE perturbation, thus validating the key insights elucidated by metadynamics simulations. Finally, both global and local reactivity descriptors derived from conceptual density functional theory (DFT) suggest that PEF is more electrophilic and susceptible to nucleophilic attack than PET. The results obtained by means of the robust computational protocol adopted here offer for the first time thermodynamic and mechanistic insights into PET and PEF hydrolysis by PETase at the molecular level. This work elucidates the experimentally observed enhanced activity of this enzyme toward PEF, paving the way for further exploration of biocatalytic plastic recycling.
- Open Access
A multi-pore model of the blood-brain barrier tight junction strands recapitulates the permeability features of wild-type and mutant claudin-5
In the blood-brain barrier (BBB), endothelial cells are joined together by multi-protein assemblies called tight junctions (TJs), which seal the paracellular space and restrict the passage of substances. Among the proteins forming BBB TJs, Claudin-5 (Cldn5) is the most abundant one. Structural models for complexes of Cldn5 and other claudins have been proposed and assessed via experimental and computational approaches. In these models, first introduced for channel-forming, selectively permeable claudins, protomers are arranged to form pores in the paracellular space that regulate transport by electrostatic and/or steric effects arising from the pore-lining residues. With limited exceptions, however, previous computational studies focused on oligomers of only a few subunits, while extended polymeric claudin strands form TJs. Here, we employ multi-microsecond all-atom molecular dynamics and free energy (FE) calculations to study two distinct models of TJ-forming Cldn5 complexes, called multi-Pore I and multi-Pore II, each comprising sixteen protomers arranged around three adjacent pores. Free energy calculations of water and ions permeation across the pores reveal that, in both models, the passage of ions is hindered by FE barriers, which are higher than in single-pore architectures. Moreover, only the multi-Pore I structural model recapitulates the effect of the G60R variant of Cldn5, making it permeable to anions. The results provide new insights into Cldn5 structure and function and validate a structural model of BBB TJs that may be useful for the study of barrier impairment in brain diseases and for developing new therapeutic approaches.
Open AccessA multi-pore model of the blood-brain barrier tight junction strands recapitulates the permeability features of wild-type and mutant claudin-5
In the blood-brain barrier (BBB), endothelial cells are joined together by multi-protein assemblies called tight junctions (TJs), which seal the paracellular space and restrict the passage of substances. Among the proteins forming BBB TJs, Claudin-5 (Cldn5) is the most abundant one. Structural models for complexes of Cldn5 and other claudins have been proposed and assessed via experimental and computational approaches. In these models, first introduced for channel-forming, selectively permeable claudins, protomers are arranged to form pores in the paracellular space that regulate transport by electrostatic and/or steric effects arising from the pore-lining residues. With limited exceptions, however, previous computational studies focused on oligomers of only a few subunits, while extended polymeric claudin strands form TJs. Here, we employ multi-microsecond all-atom molecular dynamics and free energy (FE) calculations to study two distinct models of TJ-forming Cldn5 complexes, called multi-Pore I and multi-Pore II, each comprising sixteen protomers arranged around three adjacent pores. Free energy calculations of water and ions permeation across the pores reveal that, in both models, the passage of ions is hindered by FE barriers, which are higher than in single-pore architectures. Moreover, only the multi-Pore I structural model recapitulates the effect of the G60R variant of Cldn5, making it permeable to anions. The results provide new insights into Cldn5 structure and function and validate a structural model of BBB TJs that may be useful for the study of barrier impairment in brain diseases and for developing new therapeutic approaches.
- Open Access
- 27 November 2024
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 121 (49)
Constitutive opening of the Kv7.2 pore activation gate causes KCNQ2 -developmental encephalopathy
Pathogenic variants in KCNQ2 encoding Kv7.2 voltage-gated potassium channel subunits cause developmental encephalopathies ( KCNQ2 -encephalopathies), both with and without epilepsy. We herein describe the clinical, in vitro, and in silico features of two encephalopathy-causing variants (A317T, L318V) in Kv7.2 affecting two consecutive residues in the S 6 activation gate that undergoes large structural rearrangements during pore opening; the disease-causing A356T variant in KCNQ3 , paralogous to the A317T variant in KCNQ2 , was also investigated. Currents through KCNQ2 mutant channels displayed increased density, hyperpolarizing shifts in activation gating, faster activation and slower deactivation kinetics, and resistance to changes in the cellular concentrations of phosphatidylinositol 4,5-bisphosphate (PIP 2 ), a critical regulator of Kv7 channel function; all these features are consistent with a strong gain-of-function effect. An increase in the probability of single-channel opening, with no change in membrane abundance or single-channel conductance, was responsible for the observed gain-of-function effects. All-atom molecular dynamics simulations revealed that the mutations widened the inner pore gate and stabilized a constitutively open channel configuration in the closed state, with minimal effects on the open conformation. Thus, mutation-induced stabilization of the inner pore gate open configuration is a molecular pathogenetic mechanism for KCNQ2 -related encephalopathies.
- 27 November 2024
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 121 (49)
Open AccessConstitutive opening of the Kv7.2 pore activation gate causes KCNQ2 -developmental encephalopathy
Pathogenic variants in KCNQ2 encoding Kv7.2 voltage-gated potassium channel subunits cause developmental encephalopathies ( KCNQ2 -encephalopathies), both with and without epilepsy. We herein describe the clinical, in vitro, and in silico features of two encephalopathy-causing variants (A317T, L318V) in Kv7.2 affecting two consecutive residues in the S 6 activation gate that undergoes large structural rearrangements during pore opening; the disease-causing A356T variant in KCNQ3 , paralogous to the A317T variant in KCNQ2 , was also investigated. Currents through KCNQ2 mutant channels displayed increased density, hyperpolarizing shifts in activation gating, faster activation and slower deactivation kinetics, and resistance to changes in the cellular concentrations of phosphatidylinositol 4,5-bisphosphate (PIP 2 ), a critical regulator of Kv7 channel function; all these features are consistent with a strong gain-of-function effect. An increase in the probability of single-channel opening, with no change in membrane abundance or single-channel conductance, was responsible for the observed gain-of-function effects. All-atom molecular dynamics simulations revealed that the mutations widened the inner pore gate and stabilized a constitutively open channel configuration in the closed state, with minimal effects on the open conformation. Thus, mutation-induced stabilization of the inner pore gate open configuration is a molecular pathogenetic mechanism for KCNQ2 -related encephalopathies.