Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Akhoury Sudhir Kumar Sinha has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Performance evaluation of electrodes developed from self-assembled graphene molybdenum chalcogenides for vital hydrogen/oxygen evolution and oxygen reduction reactions

    by Prerna Tripathi, Amit Kumar Verma, A. S. K. Sinha, Shikha Singh

    The development of efficient and durable multifunctional electrocatalysts is critical for green energy technologies. Herein, we report a facile one-step hydrothermal synthesis of three-dimensional (3D) self-assembled, freestanding graphene-supported molybdenum chalcogenides: MoOS-G (sulfides), MoOSe-G (selenides), and MoO-G (oxides). Among them, MoOS-G exhibits the best electrocatalytic performance for overall water splitting in acidic media, requiring an overpotential of only 280 mV to deliver a current density of 10 mA cm−2, compared to 390 mV for MoO-G and 540 mV for MoOSe-G. In addition to HER and OER, MoOS-G and MoOSe-G show high activity and stability toward H2S splitting in Na2S + NaCl (simulated seawater), generating H2 at the cathode and elemental S at the anode, with MoOS-G achieving 35 mA cm−2 at 350 mV. Furthermore, MoOS-G catalyzes the four-electron oxygen reduction reaction (ORR) with an onset potential of 0.97 V vs. RHE in alkaline media. Comprehensive structural and surface analyses (XRD, Raman, SEM, TEM, XPS) confirm the material's integrity and highlight the synergistic effect between Mo–S moieties and in situ developed sulfonated graphene. These features endow MoOS-G with high conductivity, abundant active sites, and excellent durability.


  • Open Access

    Correction: Enhanced activity and chlorine protection in prolonged seawater electrolysis using MoS 2 /sulfonated reduced graphene oxide

    by Prerna Tripathi, Renna Shakir, Amit Kumar Verma, J. Karthikeyan, Biswajit Ray, A. S. K. Sinha, Shikha Singh

    Correction for “Enhanced activity and chlorine protection in prolonged seawater electrolysis using MoS 2 /sulfonated reduced graphene oxide” by Prerna Tripathi et al. , Sustainable Energy Fuels , 2025, 9 , 4300–4319, https://doi.org/10.1039/D5SE00541H.

  • Enhanced activity and chlorine protection in prolonged seawater electrolysis using MoS2/sulfonated reduced graphene oxide

    by Prerna Tripathi, Renna Shakir, Amit Kumar Verma, J. Karthikeyan, Biswajit Ray, A. S. K. Sinha, Shikha Singh

    Electrolyzer technology necessitates the use of seawater instead of freshwater to achieve a comprehensive supply of clean and economical energy. However, the tendency of chloride ions (Cl−) to significantly erode the metal surface is a major challenge during seawater electrolysis. Therefore, designing an electrode that is resistant to chloride ions is of great importance to develop an efficient seawater electrolyser. In this work, we present a double layer anode consisting of a molybdenum sulfide electrocatalyst uniformly deposited over sulfonated graphene sheets coated over an Ni foam. The developed electrode (GNiMoOS) helps selectively convert H2O into H2 and O2 rather than chloride (Cl−) ions into ClO− in a seawater environment by resisting corrosion due to the Cl− ions in seawater. The chromogenic substrate 3,3′,5,5′-tetramethylbenzidine (TMB) provides solid evidence that the GNiMoOS electrocatalyst blocks the chloride oxidation reaction owing to its distinct resistance to Cl−. In addition, density functional theory (DFT) calculations clearly validated the preference of sulfonic moieties towards OH− compared with Cl− ions, confirming the chlorine repelling properties of the GNiMoOS electrode. The successful in situ functionalisation of sulfonic moieties into the reduced graphene oxide (RGO) skeleton with simultaneous development of flower-like MoS2 was well confirmed using XPS, Raman, SEM, TEM, and FT-IR techniques. GNiMoOS delivered an impressive current density of 100 mA cm−2 for OER and HER at room temperature, requiring remarkably low overpotentials of just 180 mV and 201 mV, respectively. Industrial faradaic current densities (400–600 mA cm−2) were reported with the active electrode at combined overpotentials of ≤600 mV at room temperature. The unique morphology of MoS2 provides more active sites for the HER/OER, while sulfonated functional groups over graphene impart much-needed anticorrosion properties to the system. Moreover, the electrical coupling between MoS2 and RGO can make the electron transfer to RGO easier. Therefore, the synergistic interactions among MoS2, SO3H and RGO lead to improved catalytic activity and prolonged stability.


  • Open Access

    Sustaining Sub-bandgap Photons via Upconversion for Solar Splitting Cells

    by Amit Kumar Verma, Prerna Tripathi, Akhoury Sudhir Kumar Sinha, Shikha Singh

    Conservation of the entire spectrum of the sun is crucial to raising the efficiency of solar splitting cells or any photochemical conversion. With the aid of upconversion nanomaterials, it could potentially be achievable. In general, solar splitting technologies are associated with numerous losses. Remarkably, inadequate utilization of the light spectrum is the primary cause of losses in photophysical processes. This is usually caused by a particular band gap in semiconductor materials, where higher-energy photons dissipate as energy and lower-energy photons, or sub-bandgap photons, are unable to be absorbed. The process of absorbing two or more photons and then emitting one photon with more energy than the sum of the individual energies of the previously absorbed ones is known as upconversion. Introducing an appropriate upconverter can significantly improve the photoconversion process’s efficiency. Efforts have been made in the past few years to enhance the efficiency, broad-range sensitivity, and activity of semiconductors by integrating upconversion systems. This chapter provides a detailed discussion of the upconversion strategies that have been used thus far to increase the efficiency of solar splitting cells. It will undoubtedly assist the researchers in advancing in this area.


  • Thermal and Electrical Analysis of N-PVT-FPC Hybrid Active Heating of Biogas Plant

    by G. N. Tiwari, Rohit Kumar Singh, Akhoury Sudhir Kumar Sinha

    In order to increase biogas production during winter months/cold climatic conditions, a self-sustained N-photovoltaic thermal and flat plate collector (PVT-FPC) hybrid active heating biogas plant has been analyzed in terms of thermal energy and electrical energy. A general analytical expression for thermal and electrical energy of the biogas plant has been derived as a function of climatic and design parameters from one order coupled differential equations. Various photovoltaic thermal and flat plate collector (N-PVT-FPC) configurations have been considered for optimizing maximum electrical and thermal energy gain for a given total number of N-PVT-FPC collectors. Based on mathematical computation for Indian cold climatic conditions, it has been found that the N-PVT-FPC combination is always better than the flat plate collector-photovoltaic thermal (N-FPC-PVT) collector for maximum electrical and thermal energy. Overall exergy analysis of hybrid active heating of biogas plants has also been carried out.


  • Study of Performance of the Flexible (Al-Based) N-PVT-TEC Collectors in Different Configurations

    by Gopal Nath Tiwari, Rohit Kumar Singh, Akhoury Sudhir Kumar Sinha, Amit Kumar Singh

    The opaque photovoltaic thermal (PVT) produces both thermal and electrical energy. In order to increase thermal energy, we have considered flexible (Al based) PV module for the present study. Further, we have considered thermo-electric cooler (TEC) integrated with flexible PV module to enhanced electrical power. Hence, an overall power can be increases in flexible PVT-TEC collector. A concept of series and parallel combination of flexible PVT-TEC collectors is proposed to optimize of series (n) and parallel (m) combinations for a given number of N (= n × m) collectors for maximum overall exergy depending on thermal and electrical energy which has not been considered yet so far. Further, a new expression has also been developed for the heat removal factor and instantaneous thermal efficiency of nth flexible PVT-TEC collector to investigate its effect on the nth flexible PVT-TEC collector performance. Numerical computations have been carried out for a given coldest climatic condition of Srinagar, India and design parameters of Al-based PVT-TEC collectors using MATLAB R2021b. Based on numerical computations, following conclusions have been drawn:


  • Open Access

    Production of Hydrogen via Water Splitting Using Photocatalytic and Photoelectrocatalytic Route

    by Akhoury Sudhir Kumar Sinha, Umaprasana Ojha, Zahoor Alam, Ajay Awdheshprasad Tripathi

    Hydrogen has been intensively explored recently as an energy carrier to meet the growing demand for green energy across the globe. One of the most difficult and significant subjects in hydrogen energy technology is efficiently creating hydrogen from water by utilizing renewable resources such as solar light. Solar-based hydrogen production comprises several routes, namely, photocatalytic, photoelectrocatalytic, and photobiological decomposition. An efficient photocatalyst is desired to accomplish the above objective by utilizing the first two routes with a minimal rate of recombination of photo-generated charge carriers. In this chapter, strategies for preventing recombination of charge carriers in photocatalysts and the development of photocatalysts have been focused on, and its utilization in the procedure for the production of hydrogen via photocatalytic and photoelectrocatalytic processes is described.


  • Open Access

    Recent Trends in Development of Metal Nitride Nanocatalysts for Water Electrolysis Application

    by Akhoury Sudhir Kumar Sinha, Umaprasana Ojha

    Nanocatalysts for sustainable water electrolysis is strongly desirable to promote the commercialization of H2 as the alternate clean energy source for the future. The goal is cheaper hydrogen production from sea and low grade water by minimizing the energy consumption and using low cost cell components & non-noble metal catalysts. The conductivity of metal nitrides and their ability to carry out Hydrogen Evolution Reaction and Oxygen Evolution Reaction at relatively low overpotential render these one of the frontline candidates to be potentially utilized as the catalyst for low cost H2 production via electrolysis. In this chapter, the potential of metal nitride catalyst towards fulfilling the above objective is discussed. The synthesis of various metal nitride catalysts, their efficiency towards electrode half reactions and the effectiveness of these class of nanocatalyst for electrolysis of sea water is elaborated. A review of recent literature with special reference to the catalyst systems based on non-noble metals will be provided to assess the likelihood of these nanocatalyst to serve as a commercial grade electrode material for sea water electrolysis.


  • Open Access

    Role of Natural Gas in India: Recent Developments and Future Perspectives

    by Akhoury Sudhir Kumar Sinha, Sanjay Kumar Kar, Umaprasana Ojha, Marriyappan Sivagnanam Balathanigaimani

    India strives for increasing the share of natural gas to 15% by 2030 from 6.5% at present. This chapter highlights recent developments to achieve the targets set by the government. Further, we discuss regulatory and policy interventions to facilitate the growth of the natural gas market in the country. We analyze the opportunities and challenges to the smooth transition of the green economy with the greater role of natural gas. We present the infrastructure developments, including liquefied natural gas (LNG) importing terminals, cross-country natural gas pipelines network, LNG tankers, refueling stations, and city gas distribution (CGD) network. Finally, we present a futuristic perspective of natural gas in the energy transition. We conclude that India being a natural gas deficient country, import dependency would continue to grow. However, this would not deter the growth of natural gas in the economy. Proactive measures by the government and its agencies will boost investment to create the desired infrastructure for achieving higher natural gas penetration in India.