TPTommaso Parrinello

Tommaso Parrinello

*This is an algorithmically generated author record based on publicly available information.

Tommaso Parrinello has a total of 149 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Validation of the Aeolus L2A products with the eVe reference lidar measurements from the ASKOS/JATAC campaign

    by Peristera Paschou, Nikolaos Siomos, Eleni Marinou, Antonis Gkikas, Samira M. Idrissa, Daniel T. Quaye, Désiré D. Fiogbe Attannon, Kalliopi Artemis Voudouri, Charikleia Meleti, David P. Donovan, et al.

    Aeolus was an ESA Earth Explorer satellite mission launched in 2018 with a lifetime of almost five years. The mission carried the Atmospheric Laser Doppler Instrument (ALADIN), a Doppler wind lidar for providing wind profiles on global scale and also vertically resolved optical properties of particles (aerosols and clouds) using the high spectral resolution lidar technique. To validate the particles' optical properties obtained from Aeolus as Level 2A products, the eVe lidar, ESA's reference system for the calibration and validation of Aeolus mission, has been deployed at the ASKOS campaign in the framework of the Joint Aeolus Tropical Atlantic Campaign (JATAC). ASKOS is the ground-based component of JATAC where ground-based remote sensing and in-situ instrumentation for aerosols, clouds, winds and radiation observations has been deployed at Cado Verde during summer 2021 and 2022 for the validation of the Aeolus products. The eVe lidar is a combined linear/circular polarization and Raman lidar specifically designed to mimic the operation of Aeolus and provide ground-based reference measurements of the optical properties for aerosols and thin clouds. The eVe lidar measurements can be used for the validation of the Aeolus L2A products while taking into consideration the ALADIN's limitation of misdetection of the cross-polar component of the backscattered signal. As such, in this validation study the cloud-free Aeolus L2A profiles obtained from the Standard Correct Algorithm (SCA), the Maximum Likelihood Estimation (MLE), and the AEL–PRO algorithms of Baseline 16 are compared against the corresponding cloud-free Aeolus-like profiles from eVe lidar, which are calculated using the retrieved particle circular depolarization ratio profile from eVe in order to account for the lack of the detection of the circular cross-polar backscatter component from Aeolus. The analysis focuses on the 14 collocated measurements between eVe and Aeolus during the nearest Aeolus overpass from the ASKOS site passing within a radius of 100 km from the site and within a temporal window of ± 1.5 h from the overpass time. The validation results reveal good performance for the co-polar particle backscatter coefficient, being the most accurate L2A product from Aeolus with absolute systematic and random errors up to 0.37 and 2 Mm−1 sr−1, respectively. The particle extinction coefficient also performs good with absolute systematic and random errors up to 53 and 183 Mm−1, respectively. The co-polar lidar ratio seems to be the noisiest L2A product with extreme error values and variability. The observed discrepancies between eVe and Aeolus L2A profiles increase at lower altitudes where higher atmospheric loads (molecules and aerosols) are encountered leading to increased noise levels in the Aeolus retrievals due to enhanced laser beam attenuation, and greater atmospheric variability (e.g. Planetary Boundary Layer inhomogeneities) are typically encountered. Overall, this study underlines the strengths of the optimal estimation algorithms (MLE and AEL–PRO) with consistent performance and reduced uncertainties, while the standard inversion algorithm (SCA), which was originally developed, could be further improved particularly in the retrieval of the particle extinction coefficient and lidar ratio. In addition, the SCAmid-bin resolution profiles outperform the corresponding SCAnormal-bin as expected, since mid-bin resolution is obtained when averaging the values from two consecutive SCAnormal height bins.


  • Open Access

    Reply on RC2

    by Peristera Paschou, Nikolaos Siomos, Eleni Marinou, Antonis Gkikas, Samira Moussa Idrissa, Daniel Tetteh Quaye, Désire Degbe Fiogbe Attannon, Kalliopi Artemis Voudouri, Charikleia Meleti, David Patric Donovan, et al.

    Aeolus was an ESA Earth Explorer satellite mission launched in 2018 with a lifetime of almost five years. The mission carried the Atmospheric Laser Doppler Instrument (ALADIN), a doppler wind lidar for providing wind profiles in global scale and also vertically resolved optical properties of particles (aerosols and clouds) using the high spectral resolution lidar technique. To validate the particles’ optical properties obtained from Aeolus as Level 2A products, the eVe lidar, ESA’s reference system for the calibration and validation of Aeolus mission, has been deployed at the ASKOS campaign in the framework of the Joint Aeolus Tropical Atlantic Campaign (JATAC). ASKOS is the ground-based component of JATAC where ground-based remote sensing and in-situ instrumentation for aerosols, clouds, winds and radiation observations has been deployed at Cado Verde during summer 2021 and 2022 for the validation of the Aeolus products. The eVe lidar is a combined linear/circular polarization and Raman lidar specifically designed to mimic the operation of Aeolus and provide ground-based reference measurements of the optical properties for aerosols and thin clouds for the validation of the Aeolus L2A products while taking into consideration the ALADIN’s limitation of misdetection of the cross-polar component of the backscattered signal. As such, in the validation study the Aeolus L2A profiles obtained from the Standard Correct Algorithm (SCA), the Maximum Likelihood Estimation (MLE), and the AEL–PRO algorithms of Baseline 16 and free from the cloud contaminated bins are compared against the corresponding cloud-free Aeolus like profiles from eVe lidar, which are harmonized to the Aeolus L2A profiles, using the 14 collocated measurements between eVe and Aeolus during the nearest Aeolus overpass from the ASKOS site. The validation results reveal good performance for the co-polar particle backscatter coefficient being the most accurate L2A product from Aeolus with overall errors up to 2 Mm-1sr-1, followed by the noisier particle extinction coefficient with overall errors up to 183 Mm-1, and the co-polar lidar ratio which is the noisiest L2A product with extreme error values and variability. The observed discrepancies between eVe and Aeolus L2A profiles increase at lower altitudes where higher atmospheric loads, which lead to increased noise levels in the Aeolus retrievals due to enhanced laser beam attenuation, and greater atmospheric variability (e.g. PBL inhomogeneities) are typically encountered. Overall, this study underlines the strengths of the optimal estimation algorithms (MLE and AEL–PRO) with consistent performance and reduced discrepancies, while the standard inversion algorithm (SCA), which was originally developed, could be further improved particularly in the retrieval of the particle extinction coefficient and lidar ratio. In addition, the SCA–Mid bin resolution profiles outperform the corresponding SCA–Rayleigh bin as expected, since Mid bin resolution is obtained when averaging the values from two consecutive SCA–Rayleigh height bins.

  • Open Access

    Reply on RC1

    by Peristera Paschou, Nikolaos Siomos, Eleni Marinou, Antonis Gkikas, Samira Moussa Idrissa, Daniel Tetteh Quaye, Désire Degbe Fiogbe Attannon, Kalliopi Artemis Voudouri, Charikleia Meleti, David Patric Donovan, et al.

    Aeolus was an ESA Earth Explorer satellite mission launched in 2018 with a lifetime of almost five years. The mission carried the Atmospheric Laser Doppler Instrument (ALADIN), a doppler wind lidar for providing wind profiles in global scale and also vertically resolved optical properties of particles (aerosols and clouds) using the high spectral resolution lidar technique. To validate the particles’ optical properties obtained from Aeolus as Level 2A products, the eVe lidar, ESA’s reference system for the calibration and validation of Aeolus mission, has been deployed at the ASKOS campaign in the framework of the Joint Aeolus Tropical Atlantic Campaign (JATAC). ASKOS is the ground-based component of JATAC where ground-based remote sensing and in-situ instrumentation for aerosols, clouds, winds and radiation observations has been deployed at Cado Verde during summer 2021 and 2022 for the validation of the Aeolus products. The eVe lidar is a combined linear/circular polarization and Raman lidar specifically designed to mimic the operation of Aeolus and provide ground-based reference measurements of the optical properties for aerosols and thin clouds for the validation of the Aeolus L2A products while taking into consideration the ALADIN’s limitation of misdetection of the cross-polar component of the backscattered signal. As such, in the validation study the Aeolus L2A profiles obtained from the Standard Correct Algorithm (SCA), the Maximum Likelihood Estimation (MLE), and the AEL–PRO algorithms of Baseline 16 and free from the cloud contaminated bins are compared against the corresponding cloud-free Aeolus like profiles from eVe lidar, which are harmonized to the Aeolus L2A profiles, using the 14 collocated measurements between eVe and Aeolus during the nearest Aeolus overpass from the ASKOS site. The validation results reveal good performance for the co-polar particle backscatter coefficient being the most accurate L2A product from Aeolus with overall errors up to 2 Mm-1sr-1, followed by the noisier particle extinction coefficient with overall errors up to 183 Mm-1, and the co-polar lidar ratio which is the noisiest L2A product with extreme error values and variability. The observed discrepancies between eVe and Aeolus L2A profiles increase at lower altitudes where higher atmospheric loads, which lead to increased noise levels in the Aeolus retrievals due to enhanced laser beam attenuation, and greater atmospheric variability (e.g. PBL inhomogeneities) are typically encountered. Overall, this study underlines the strengths of the optimal estimation algorithms (MLE and AEL–PRO) with consistent performance and reduced discrepancies, while the standard inversion algorithm (SCA), which was originally developed, could be further improved particularly in the retrieval of the particle extinction coefficient and lidar ratio. In addition, the SCA–Mid bin resolution profiles outperform the corresponding SCA–Rayleigh bin as expected, since Mid bin resolution is obtained when averaging the values from two consecutive SCA–Rayleigh height bins.

  • Open Access

    Comment on egusphere-2025-1152

    by Peristera Paschou, Nikolaos Siomos, Eleni Marinou, Antonis Gkikas, Samira Moussa Idrissa, Daniel Tetteh Quaye, Désire Degbe Fiogbe Attannon, Kalliopi Artemis Voudouri, Charikleia Meleti, David Patric Donovan, et al.

    Aeolus was an ESA Earth Explorer satellite mission launched in 2018 with a lifetime of almost five years. The mission carried the Atmospheric Laser Doppler Instrument (ALADIN), a doppler wind lidar for providing wind profiles in global scale and also vertically resolved optical properties of particles (aerosols and clouds) using the high spectral resolution lidar technique. To validate the particles’ optical properties obtained from Aeolus as Level 2A products, the eVe lidar, ESA’s reference system for the calibration and validation of Aeolus mission, has been deployed at the ASKOS campaign in the framework of the Joint Aeolus Tropical Atlantic Campaign (JATAC). ASKOS is the ground-based component of JATAC where ground-based remote sensing and in-situ instrumentation for aerosols, clouds, winds and radiation observations has been deployed at Cado Verde during summer 2021 and 2022 for the validation of the Aeolus products. The eVe lidar is a combined linear/circular polarization and Raman lidar specifically designed to mimic the operation of Aeolus and provide ground-based reference measurements of the optical properties for aerosols and thin clouds for the validation of the Aeolus L2A products while taking into consideration the ALADIN’s limitation of misdetection of the cross-polar component of the backscattered signal. As such, in the validation study the Aeolus L2A profiles obtained from the Standard Correct Algorithm (SCA), the Maximum Likelihood Estimation (MLE), and the AEL–PRO algorithms of Baseline 16 and free from the cloud contaminated bins are compared against the corresponding cloud-free Aeolus like profiles from eVe lidar, which are harmonized to the Aeolus L2A profiles, using the 14 collocated measurements between eVe and Aeolus during the nearest Aeolus overpass from the ASKOS site. The validation results reveal good performance for the co-polar particle backscatter coefficient being the most accurate L2A product from Aeolus with overall errors up to 2 Mm-1sr-1, followed by the noisier particle extinction coefficient with overall errors up to 183 Mm-1, and the co-polar lidar ratio which is the noisiest L2A product with extreme error values and variability. The observed discrepancies between eVe and Aeolus L2A profiles increase at lower altitudes where higher atmospheric loads, which lead to increased noise levels in the Aeolus retrievals due to enhanced laser beam attenuation, and greater atmospheric variability (e.g. PBL inhomogeneities) are typically encountered. Overall, this study underlines the strengths of the optimal estimation algorithms (MLE and AEL–PRO) with consistent performance and reduced discrepancies, while the standard inversion algorithm (SCA), which was originally developed, could be further improved particularly in the retrieval of the particle extinction coefficient and lidar ratio. In addition, the SCA–Mid bin resolution profiles outperform the corresponding SCA–Rayleigh bin as expected, since Mid bin resolution is obtained when averaging the values from two consecutive SCA–Rayleigh height bins.

  • Open Access

    Comment on egusphere-2025-1152

    by Peristera Paschou, Nikolaos Siomos, Eleni Marinou, Antonis Gkikas, Samira Moussa Idrissa, Daniel Tetteh Quaye, Désire Degbe Fiogbe Attannon, Kalliopi Artemis Voudouri, Charikleia Meleti, David Patric Donovan, et al.

    Aeolus was an ESA Earth Explorer satellite mission launched in 2018 with a lifetime of almost five years. The mission carried the Atmospheric Laser Doppler Instrument (ALADIN), a doppler wind lidar for providing wind profiles in global scale and also vertically resolved optical properties of particles (aerosols and clouds) using the high spectral resolution lidar technique. To validate the particles’ optical properties obtained from Aeolus as Level 2A products, the eVe lidar, ESA’s reference system for the calibration and validation of Aeolus mission, has been deployed at the ASKOS campaign in the framework of the Joint Aeolus Tropical Atlantic Campaign (JATAC). ASKOS is the ground-based component of JATAC where ground-based remote sensing and in-situ instrumentation for aerosols, clouds, winds and radiation observations has been deployed at Cado Verde during summer 2021 and 2022 for the validation of the Aeolus products. The eVe lidar is a combined linear/circular polarization and Raman lidar specifically designed to mimic the operation of Aeolus and provide ground-based reference measurements of the optical properties for aerosols and thin clouds for the validation of the Aeolus L2A products while taking into consideration the ALADIN’s limitation of misdetection of the cross-polar component of the backscattered signal. As such, in the validation study the Aeolus L2A profiles obtained from the Standard Correct Algorithm (SCA), the Maximum Likelihood Estimation (MLE), and the AEL–PRO algorithms of Baseline 16 and free from the cloud contaminated bins are compared against the corresponding cloud-free Aeolus like profiles from eVe lidar, which are harmonized to the Aeolus L2A profiles, using the 14 collocated measurements between eVe and Aeolus during the nearest Aeolus overpass from the ASKOS site. The validation results reveal good performance for the co-polar particle backscatter coefficient being the most accurate L2A product from Aeolus with overall errors up to 2 Mm-1sr-1, followed by the noisier particle extinction coefficient with overall errors up to 183 Mm-1, and the co-polar lidar ratio which is the noisiest L2A product with extreme error values and variability. The observed discrepancies between eVe and Aeolus L2A profiles increase at lower altitudes where higher atmospheric loads, which lead to increased noise levels in the Aeolus retrievals due to enhanced laser beam attenuation, and greater atmospheric variability (e.g. PBL inhomogeneities) are typically encountered. Overall, this study underlines the strengths of the optimal estimation algorithms (MLE and AEL–PRO) with consistent performance and reduced discrepancies, while the standard inversion algorithm (SCA), which was originally developed, could be further improved particularly in the retrieval of the particle extinction coefficient and lidar ratio. In addition, the SCA–Mid bin resolution profiles outperform the corresponding SCA–Rayleigh bin as expected, since Mid bin resolution is obtained when averaging the values from two consecutive SCA–Rayleigh height bins.

  • Open Access

    Validation of the Aeolus L2A products with the eVe reference lidar measurements from the ASKOS/JATAC campaign

    by Peristera Paschou, Nikolaos Siomos, Eleni Marinou, Antonis Gkikas, Samira Moussa Idrissa, Daniel Tetteh Quaye, Désire Degbe Fiogbe Attannon, Kalliopi Artemis Voudouri, Charikleia Meleti, David Patric Donovan, et al.

    Aeolus was an ESA Earth Explorer satellite mission launched in 2018 with a lifetime of almost five years. The mission carried the Atmospheric Laser Doppler Instrument (ALADIN), a doppler wind lidar for providing wind profiles in global scale and also vertically resolved optical properties of particles (aerosols and clouds) using the high spectral resolution lidar technique. To validate the particles’ optical properties obtained from Aeolus as Level 2A products, the eVe lidar, ESA’s reference system for the calibration and validation of Aeolus mission, has been deployed at the ASKOS campaign in the framework of the Joint Aeolus Tropical Atlantic Campaign (JATAC). ASKOS is the ground-based component of JATAC where ground-based remote sensing and in-situ instrumentation for aerosols, clouds, winds and radiation observations has been deployed at Cado Verde during summer 2021 and 2022 for the validation of the Aeolus products. The eVe lidar is a combined linear/circular polarization and Raman lidar specifically designed to mimic the operation of Aeolus and provide ground-based reference measurements of the optical properties for aerosols and thin clouds for the validation of the Aeolus L2A products while taking into consideration the ALADIN’s limitation of misdetection of the cross-polar component of the backscattered signal. As such, in the validation study the Aeolus L2A profiles obtained from the Standard Correct Algorithm (SCA), the Maximum Likelihood Estimation (MLE), and the AEL–PRO algorithms of Baseline 16 and free from the cloud contaminated bins are compared against the corresponding cloud-free Aeolus like profiles from eVe lidar, which are harmonized to the Aeolus L2A profiles, using the 14 collocated measurements between eVe and Aeolus during the nearest Aeolus overpass from the ASKOS site. The validation results reveal good performance for the co-polar particle backscatter coefficient being the most accurate L2A product from Aeolus with overall errors up to 2 Mm-1sr-1, followed by the noisier particle extinction coefficient with overall errors up to 183 Mm-1, and the co-polar lidar ratio which is the noisiest L2A product with extreme error values and variability. The observed discrepancies between eVe and Aeolus L2A profiles increase at lower altitudes where higher atmospheric loads, which lead to increased noise levels in the Aeolus retrievals due to enhanced laser beam attenuation, and greater atmospheric variability (e.g. PBL inhomogeneities) are typically encountered. Overall, this study underlines the strengths of the optimal estimation algorithms (MLE and AEL–PRO) with consistent performance and reduced discrepancies, while the standard inversion algorithm (SCA), which was originally developed, could be further improved particularly in the retrieval of the particle extinction coefficient and lidar ratio. In addition, the SCA–Mid bin resolution profiles outperform the corresponding SCA–Rayleigh bin as expected, since Mid bin resolution is obtained when averaging the values from two consecutive SCA–Rayleigh height bins.

  • Open Access

    CryoSat Mission: CalVal, Science and International Cooperation Activities

    by Alessandro Di Bella, Tommaso Parrinello

    Launched in 2010, the European Space Agency’s (ESA) CryoSat mission was the first polar-orbiting satellite flying a SAR Interferometric altimeter dedicated to the cryosphere, with the objectives to monitor precise changes in the thickness of polar ice sheets and floating sea ice. After 14 years in orbit, CryoSat remains one of the most innovative radar altimeters in space and continues to deliver high-quality data, providing unique contributions to several Earth Science and application domains. The mission has been extended until the end of 2025 with the scope to achieve important scientific objectives and to extend the synergy with other missions by further strengthening international cooperation.Routine CalVal activities are fundamental to evaluate the accuracy of CryoSat measurements, to monitor the long-term stability of the altimeter, and to characterise uncertainties on the final geophysical retrievals. In this talk, we present the CryoSat mission status and show results from some of the several CalVal activities currently in place, e.g., acquisition over transponders, comparison of sea level at tide gauges and exploitation of data collected during polar field campaigns. We also highlight the importance of international cooperation in CalVal and Science activities from the perspective of the ESA-NASA CRYO2ICE campaign, aligning CryoSat orbit to the one of ICESat-2, and the Sea Ice Thickness Intercomparison Exercise (SIN’XS) project, aiming to provide reconciled sea ice thickness estimates in both hemispheres. Finally, we discuss how current and future CryoSat activities are crucial to prepare for the upcoming Copernicus CRISTAL mission which will provide coincident measurements at Ka and Ku bands.

  • Open Access

    Aeolus Satellite: A Breath of Fresh Air for Climate Change Education

    by Panagiota Asimakopoulou, Ioanna Tsikoudi, Maria Tsichla, Panagiotis Nastos, Clara Cruz Niggebrugge, Maurane Gisiger, Thorsten Fehr, Tommaso Parrinello

    The field of Earth Observation (EO) is perpetually evolving attaining remarkable advancements that improve our understanding of the underlying physical phenomena behind climate change. One of the latest EO advancements is the Aeolus mission of the European Space Agency (ESA). Aeolus is the first satellite to deploy a Doppler wind lidar instrument, utilising laser technology to accurately measure wind profiles. This innovation significantly improved weather forecasting, atmospheric modeling, and climate research, enabling better predictions of extreme weather events and advancing our knowledge of atmospheric circulation patterns.By following the rapid advancements in Earth Observation (EO), climate change and sustainability education has a promising opportunity to capitalize on these developments for the mutual benefit of EO and climate literacy. In this context, we designed an innovative educational programme, the "AeolusEdu[1]", with the support of the ESA Education office and the Greek ESERO office. We implemented AeolusEdu during the Aeolus Science Conference in Rhodes (May 2023), which attracted 150 6th grade students from the 1st, 12th, and 13th Primary Schools of Rhodes.Throughout the program, students were engaged in an interactive learning experience, delving into the factors influencing winds, understanding the underlying physical principles of atmospheric circulation, and exploring the "Doppler Wind Lidar" technology employed for space-based wind monitoring through thoughtfully designed hands-on experiments. Additionally, students were able to interact with both historic and modern ground-based instruments used in wind monitoring. At the program's conclusion, students had the unique opportunity to meet some of the world’s leading space and weather experts involved in the Aeolus mission and discuss, in a notably extended Q&A session, their work and the motivations driving their careers as scientists.According to the feedback received from participating teachers and students and the overwhelming applause and farewell scientists received, AeolusEdu admittedly captivated students and ignited their curiosity for EO and Earth System Science (see relevant ESA article[2]). The implementation of AeolusEdu illustrated that young school students can not only comprehend the fundamental concepts and principles behind atmospheric circulation, extreme weather events, and groundbreaking satellite technology but also find them genuinely exciting. The success of the first AeolusEdu pilot programme inspires us for future development of freely available EO-based information material for all teachers. [1] https://www.aeolus2023.org/education [2] https://www.esa.int/Education/Students_blown_away_by_Aeolus

  • Open Access

    The EOLIS dataset: Monitoring Land Ice from CryoSat-2 Swath Processing

    by Livia Jakob, Noel Gourmelen, Carolyn Michael, Sophie Dubber, Martin Ewart, Julia Bizon, Alex Horton, Tristan Goss, Andrea Incatasciato, Alessandro Di Bella, et al.

    Satellite radar altimetry has been routinely used to monitor land ice heights since the 1990s. However, the launch of CryoSat-2 – the first altimetry mission to carry a synthetic aperture radar interferometer on board – has allowed several technical breakthroughs and led to many new applications that were previously unforeseen. One such breakthrough is Swath processing of CryoSat’s SARIn mode, making full exploitation of the information contained in CryoSat’s waveforms and leading to one to two orders of magnitude more measurements than the conventional so-called Point-Of-Closest-Approach (POCA) technique.Following on from the early demonstration of the technique and of its potential impact, the CryoTEMPO EOLIS (Elevation Over Land Ice From Swath) dataset now routinely provides information of elevation over land ice at high resolution on a monthly basis. The dataset allows the use of radar altimetry in new environments such as the more complex terrain over glaciers and ice caps, as well as new applications thanks to the superior spatial and temporal resolution, such as the more precise quantification of subglacial lake drainage events. Currently, the EOLIS dataset is provided at monthly intervals over both ice sheets as well as all larger glacier regions, with future developments such as the expansion of the dataset to the ice shelves and new gapless annual DEMs over the two ice sheets coming soon.With the aim of making CryoSat-2 altimetry data available to non-altimetry experts and encouraging its use more broadly by the community, the platform CS2EO (cs2eo.org) provides advanced data access to the EOLIS suite datasets. In CS2EO, users can query coincident data with other altimetry sensors, as well as explore and download custom elevation change time series over desired areas on ice sheets and glaciers, without having to download the EOLIS data first.

  • Open Access

    The Joint Aeolus Tropical Atlantic Campaign 2021/2022 Overview– Atmospheric Science and Satellite Validation in the Tropics

    by Thorsten Fehr, Will McCarthy, Vassilis Amiridis, Holger Baars, Jonas von Bismarck, Maurus Borne, Shuyi Chen, Cyrille Flamant, Franco Marenco, Peter Knipperz, et al.

    ESA’s Aeolus satellite observations are expected to have the biggest impact for the improvement of numerical weather prediction in the Tropics. An important case relating to the predictability of tropical weather systems is the outflow of Saharan dust, its interaction with cloud microphysics and impact on the development of tropical storms over the Atlantic Ocean.The Joint Aeolus Tropical Atlantic Campaign (JATAC) deployed on Cabo Verde (2021/2022) and the US Virgin Islands (2021) supported the validation and preparation of the ESA missions Aeolus, EarthCARE and WIVERN, and addressed science objectives regarding the Saharan Aerosol layer, African Easterly Waves and Jet, Tropical Easterly Jet, and the Intertropical Convergence Zone, as well as their relation to the formation of convective systems, and the long-range transport of dust and its impact on air quality.JATAC started in July 2021 with the deployment of ground-based instruments in the frame of the ASKOS project at the Ocean Science Center Mindelo, including the eVe and PollyXT lidars, and a W-band Doppler cloud radar. By mid-August, the CPEX-AW campaign started operations from the US Virgin Islands with NASA’s DC-8 flying laboratory in the Western Tropical Atlantic and Caribbean carrying the Doppler Aerosol Wind Lidar (DAWN), Airborne Precipitation and Cloud Radar (APR-3), Water Vapor DIAL and HSRL (HALO), microwave sounder (HAMSR) and dropsondes. In September the DLR Falcon-20 aircraft, carrying the ALADIN Airborne Demonstrator (A2D) and the 2-µm Doppler wind lidar, and the Safire Falcon-20, carrying the high-spectral-resolution Doppler lidar (LNG), the RASTA Doppler cloud radar, in-situ cloud and aerosol instruments, and dropsondes, were deployed to Sal in the frame of the AVATAR-T and CADDIWA projects. The Aerovizija Advantic WT-10 light aircraft with optical particle spectrometers, filter-photometers and nephelometers for in-situ aerosol characterisation was operating in close coordination with the ground-based observations in the CAVA-AW project.The activities continued in June 2022 when the ASKOS ground based observations were enhanced with UAV airborne in-situ aerosol measurements deployed by the Cyprus Institute, solar radiation measurements supported by PMOD/WRC, dust particle orientation measurements (WALL-E lidar), and radiosonde releases equipped with electric field-mills. NASA deployed the DC-8 aircraft all September to Sal with the 2021 payload in the framework of the CPEX-CV activity, including regular radiosonde launches. As in 2021, the Aerovizija aircraft took part with in-situ aerosol measurements during two weeks in September. JATAC was supported by dedicated numerical weather and dust simulations supporting forecasting efforts and addressing open science questions.Around 60 scientific flights of four aircraft, with an additional 25 UAV flights, were performed during JATAC. 23 Aeolus orbits were underflown, many of them with simultaneous observations of multiple aircraft collocated with ground-based observations. In addition, the science objectives were fully covered through the large number of flights, ground based cloud and aerosol observations, regular radiosondes and dropsondes.Overall, JATAC activities have resulted in a high-quality and comprehensive dataset supporting a wide range of tropical atmospheric research, the validation of Aeolus and other satellites, and have provided key reference data for the development future Earth Observation missions.