Guanrui Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Guanrui Li has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Giuseppe Loianno
Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, Berkeley, CA, USA
8 shared publications - Luis F. Recalde
Worcester Polytechnic Institute, Robotics Engineering, Worcester, MA, USA
4 shared publications - Mrunal Sarvaiya
Department of Electrical Engineering and Computer Sciences, University of California Berkeley, Berkeley, CA, USA
3 shared publications - Edison Velasco-Sánchez
Group of Automation, Robotics and Computer Vision (AUROVA), University of Alicante, 03690 Alicante, Spain
2 shared publications - Rundong Ge
Electrical and Computer Engineering, New York University, Brooklyn, New York, United States of America, 11201
2 shared publications - Xinyang Liu
New York University, New York, NY, USA
2 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 8504-8511
VBT-MPC: Vision-Based Tactile MPC for Contour Following
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (7) , 8504-8511
Open AccessVBT-MPC: Vision-Based Tactile MPC for Contour Following
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (3) , 2991-2998
PolyFly: Polytopic Optimal Planning for Collision-Free Cable-Suspended Aerial Payload Transportation
Aerial transportation robots using suspended cables have emerged as versatile platforms for disaster response and rescue operations. To maximize the capabilities of these systems, robots need to aggressively fly through tightly constrained environments, such as dense forests and structurally unsafe buildings, while minimizing flight time and avoiding obstacles. Existing methods geometrically over-approximate the vehicle and obstacles, leading to conservative maneuvers and increased flight times. We eliminate these restrictions by proposing PolyFly, an optimal global planner which considers a non-conservative representation for aerial transportation by modeling each physical component of the environment, and the robot (quadrotor, cable and payload), as independent polytopes. We further increase the model accuracy by incorporating the attitude of the physical components by constructing orientation-aware polytopes. The resulting optimal control problem is efficiently solved by converting the polytope constraints into smooth differentiable constraints via duality theory. We compare our method against the existing state-of-the-art approach in eight maze-like environments and show that PolyFly produces faster trajectories in each scenario. We also experimentally validate our proposed approach on a real quadrotor with a suspended payload, demonstrating the practical reliability and accuracy of our method.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (3) , 2991-2998
PolyFly: Polytopic Optimal Planning for Collision-Free Cable-Suspended Aerial Payload Transportation
Aerial transportation robots using suspended cables have emerged as versatile platforms for disaster response and rescue operations. To maximize the capabilities of these systems, robots need to aggressively fly through tightly constrained environments, such as dense forests and structurally unsafe buildings, while minimizing flight time and avoiding obstacles. Existing methods geometrically over-approximate the vehicle and obstacles, leading to conservative maneuvers and increased flight times. We eliminate these restrictions by proposing PolyFly, an optimal global planner which considers a non-conservative representation for aerial transportation by modeling each physical component of the environment, and the robot (quadrotor, cable and payload), as independent polytopes. We further increase the model accuracy by incorporating the attitude of the physical components by constructing orientation-aware polytopes. The resulting optimal control problem is efficiently solved by converting the polytope constraints into smooth differentiable constraints via duality theory. We compare our method against the existing state-of-the-art approach in eight maze-like environments and show that PolyFly produces faster trajectories in each scenario. We also experimentally validate our proposed approach on a real quadrotor with a suspended payload, demonstrating the practical reliability and accuracy of our method.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- p. 1-8
DQ-MPCC: Dual-Quaternion MPCC for Quadrotor Racing
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- p. 1-8
DQ-MPCC: Dual-Quaternion MPCC for Quadrotor Racing
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (1) , 266-273
ES-HPC-MPC: Exponentially Stable Hybrid Perception Constrained MPC for Quadrotor With Suspended Payloads
Aerial transportation using quadrotors with cable-suspended payloads holds great potential for applications in disaster response, logistics, and infrastructure maintenance. However, their hybrid and underactuated dynamics pose significant control and perception challenges. Traditional approaches often assume a taut cable condition, limiting their effectiveness in real-world applications where slack-to-taut transitions occur due to disturbances. We introduce ES-HPC-MPC, a model predictive control framework that enforces exponential stability and perception-constrained control under hybrid dynamics. Our method leverages Exponentially Stabilizing Control Lyapunov Functions (ES-CLFs) to enforce stability during the tasks and Control Barrier Functions (CBFs) to maintain the payload within the onboard camera's field of view (FoV). We validate our method through both simulation and real-world experiments, demonstrating stable trajectory tracking and reliable payload perception. We validate that our method maintains stability and satisfies perception constraints while tracking dynamically infeasible trajectories and when the system is subjected to hybrid mode transitions caused by unexpected disturbances.
- 12 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (1) , 266-273
ES-HPC-MPC: Exponentially Stable Hybrid Perception Constrained MPC for Quadrotor With Suspended Payloads
Aerial transportation using quadrotors with cable-suspended payloads holds great potential for applications in disaster response, logistics, and infrastructure maintenance. However, their hybrid and underactuated dynamics pose significant control and perception challenges. Traditional approaches often assume a taut cable condition, limiting their effectiveness in real-world applications where slack-to-taut transitions occur due to disturbances. We introduce ES-HPC-MPC, a model predictive control framework that enforces exponential stability and perception-constrained control under hybrid dynamics. Our method leverages Exponentially Stabilizing Control Lyapunov Functions (ES-CLFs) to enforce stability during the tasks and Control Barrier Functions (CBFs) to maintain the payload within the onboard camera's field of view (FoV). We validate our method through both simulation and real-world experiments, demonstrating stable trajectory tracking and reliable payload perception. We validate that our method maintains stability and satisfies perception constraints while tracking dynamically infeasible trajectories and when the system is subjected to hybrid mode transitions caused by unexpected disturbances.
- 17 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (12) , 12644-12651
DQ-NMPC: Dual-Quaternion NMPC for Quadrotor Flight
MAVs have great potential to assist humans in complex tasks, with applications ranging from logistics to emergency response. Their agility makes them ideal for operations in complex and dynamic environments. However, achieving precise control in agile flights remains a significant challenge, particularly due to the underactuated nature of quadrotors and the strong coupling between their translational and rotational dynamics. In this work, we propose a novel NMPC framework based on dual-quaternions (DQ-NMPC) for quadrotor flight. By representing both quadrotor dynamics and the pose error directly on the dual-quaternion manifold, our approach enables a compact and globally non-singular formulation that captures the quadrotor coupled dynamics. We validate our approach through simulations and real-world experiments, demonstrating better numerical conditioning and significantly improved tracking performance, with reductions in position and orientation errors of up to 56.11% and 56.77%, compared to a conventional baseline NMPC method. Furthermore, our controller successfully handles aggressive trajectories, reaching maximum speeds up to ${\text{13.66}} \, {\text{m/s}}$ and accelerations reaching ${\text{4.2}} \,{\text{g}}$ within confined space conditions of dimensions ${\text{11}}\, {\text{m}} \times {\text{4.5}}\, {\text{m}} \times {\text{3.65}}\, {\text{m}}$ under which the baseline controller fails.
- 17 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (12) , 12644-12651
DQ-NMPC: Dual-Quaternion NMPC for Quadrotor Flight
MAVs have great potential to assist humans in complex tasks, with applications ranging from logistics to emergency response. Their agility makes them ideal for operations in complex and dynamic environments. However, achieving precise control in agile flights remains a significant challenge, particularly due to the underactuated nature of quadrotors and the strong coupling between their translational and rotational dynamics. In this work, we propose a novel NMPC framework based on dual-quaternions (DQ-NMPC) for quadrotor flight. By representing both quadrotor dynamics and the pose error directly on the dual-quaternion manifold, our approach enables a compact and globally non-singular formulation that captures the quadrotor coupled dynamics. We validate our approach through simulations and real-world experiments, demonstrating better numerical conditioning and significantly improved tracking performance, with reductions in position and orientation errors of up to 56.11% and 56.77%, compared to a conventional baseline NMPC method. Furthermore, our controller successfully handles aggressive trajectories, reaching maximum speeds up to ${\text{13.66}} \, {\text{m/s}}$ and accelerations reaching ${\text{4.2}} \,{\text{g}}$ within confined space conditions of dimensions ${\text{11}}\, {\text{m}} \times {\text{4.5}}\, {\text{m}} \times {\text{3.65}}\, {\text{m}}$ under which the baseline controller fails.
- Open Access
- 22 April 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 191
DualQuat-LOAM: LiDAR odometry and mapping parameterized on dual quaternions
- 22 April 2025
- Published by Elsevier in Robotics and Autonomous Systems
- Vol. 191
Open AccessDualQuat-LOAM: LiDAR odometry and mapping parameterized on dual quaternions
- 25 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (1) , 358-365
HPA-MPC: Hybrid Perception-Aware Nonlinear Model Predictive Control for Quadrotors With Suspended Loads
Quadrotors equipped with cable-suspended loads represent a versatile, low-cost, and energy efficient solution for aerial transportation, construction, and manipulation tasks. However, their real-world deployment is hindered by several challenges. The system is difficult to control because it is nonlinear, underactuated, involves hybrid dynamics due to slack-taut cable modes, and evolves on complex configuration spaces. Additionally, it is crucial to estimate the full state and the cable's mode transitions in real-time using on-board sensors and computation. To address these challenges, we present a novel Hybrid Perception-Aware Nonlinear Model Predictive Control (HPA-MPC) control approach for quadrotors with suspended loads. Our method considers the complete hybrid system dynamics and includes a perception-aware cost to ensure the payload remains visible in the robot's camera during navigation. Furthermore, the full state and hybrid dynamics' transitions are estimated using onboard sensors. Experimental results demonstrate that our approach enables stable load tracking control, even during slack-taut transitions, and operates entirely onboard. The experiments also show that the perception-aware term effectively keeps the payload in the robot's camera field of view when a human operator interacts with the load.
- 25 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (1) , 358-365
HPA-MPC: Hybrid Perception-Aware Nonlinear Model Predictive Control for Quadrotors With Suspended Loads
Quadrotors equipped with cable-suspended loads represent a versatile, low-cost, and energy efficient solution for aerial transportation, construction, and manipulation tasks. However, their real-world deployment is hindered by several challenges. The system is difficult to control because it is nonlinear, underactuated, involves hybrid dynamics due to slack-taut cable modes, and evolves on complex configuration spaces. Additionally, it is crucial to estimate the full state and the cable's mode transitions in real-time using on-board sensors and computation. To address these challenges, we present a novel Hybrid Perception-Aware Nonlinear Model Predictive Control (HPA-MPC) control approach for quadrotors with suspended loads. Our method considers the complete hybrid system dynamics and includes a perception-aware cost to ensure the payload remains visible in the robot's camera during navigation. Furthermore, the full state and hybrid dynamics' transitions are estimated using onboard sensors. Experimental results demonstrate that our approach enables stable load tracking control, even during slack-taut transitions, and operates entirely onboard. The experiments also show that the perception-aware term effectively keeps the payload in the robot's camera field of view when a human operator interacts with the load.
- 19 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 762-781
Human-Aware Physical Human–Robot Collaborative Transportation and Manipulation With Multiple Aerial Robots
Human–robot interaction will play an essential role in various industries and daily tasks, enabling robots to effectively collaborate with humans and reduce physical workload. Most existing approaches for physical human–robot interaction focus on collaboration between a human and a single ground or aerial robot. In recent years, very little progress has been made in this research area when considering multiple aerial robots, which offer increased versatility and mobility. This article presents a novel approach for physical human–robot collaborative transportation and manipulation of a cable-suspended payload with multiple aerial robots. The proposed method enables smooth and intuitive interaction between the transported objects and a human worker. We address the inter-robots and inter-robot–human separation during the operations by exploiting the internal redundancy of the multirobot transportation system. The key elements of our approach are, first, a collaborative payload external wrench estimator that does not rely on any force sensor; second, a 6-D admittance controller for human–aerial–robot collaborative transportation and manipulation; third, a human-aware force distribution that exploits the internal system redundancy to guarantee the execution of additional tasks such as inter-human–robot separation without compromising the payload trajectory tracking or interaction quality. We validate our approach through extensive simulation and real-world experiments. These include scenarios where the robot team assists the human in transporting and manipulating a load, or where the human helps the robot team navigate the environment. We experimentally demonstrate for the first time, to the best of authors' knowledge that our approach enables a quadrotor team to physically collaborate with a human in manipulating a payload in all 6 degrees of freedom in collaborative human–robot transportation and manipulation tasks.
- 19 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 41 (15523098) , 762-781
Human-Aware Physical Human–Robot Collaborative Transportation and Manipulation With Multiple Aerial Robots
Human–robot interaction will play an essential role in various industries and daily tasks, enabling robots to effectively collaborate with humans and reduce physical workload. Most existing approaches for physical human–robot interaction focus on collaboration between a human and a single ground or aerial robot. In recent years, very little progress has been made in this research area when considering multiple aerial robots, which offer increased versatility and mobility. This article presents a novel approach for physical human–robot collaborative transportation and manipulation of a cable-suspended payload with multiple aerial robots. The proposed method enables smooth and intuitive interaction between the transported objects and a human worker. We address the inter-robots and inter-robot–human separation during the operations by exploiting the internal redundancy of the multirobot transportation system. The key elements of our approach are, first, a collaborative payload external wrench estimator that does not rely on any force sensor; second, a 6-D admittance controller for human–aerial–robot collaborative transportation and manipulation; third, a human-aware force distribution that exploits the internal system redundancy to guarantee the execution of additional tasks such as inter-human–robot separation without compromising the payload trajectory tracking or interaction quality. We validate our approach through extensive simulation and real-world experiments. These include scenarios where the robot team assists the human in transporting and manipulating a load, or where the human helps the robot team navigate the environment. We experimentally demonstrate for the first time, to the best of authors' knowledge that our approach enables a quadrotor team to physically collaborate with a human in manipulating a payload in all 6 degrees of freedom in collaborative human–robot transportation and manipulation tasks.
- 24 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 831-850
RotorTM: A Flexible Simulator for Aerial Transportation and Manipulation
Low-cost autonomous micro aerial vehicles have great potential to help humans by simplifying and speeding up complex tasks, such as construction, package delivery, and search and rescue. These systems, which may consist of single or multiple vehicles, can be equipped with passive connection mechanisms, such as rigid links or cables for transportation and manipulation tasks. However, these systems are inherently complex. They are often underactuated and evolve in nonlinear manifold configuration spaces. In addition, the complexity escalates for systems with cable-suspended load due to the hybrid dynamics that vary with the cables' tension conditions. This article presents the first aerial transportation and manipulation simulator incorporating different payloads and passive connection mechanisms with full system dynamics, planning, and control algorithms. Furthermore, it includes a novel general model accounting for the transient hybrid dynamics for aerial systems with cable-suspended load to closely mimic real-world systems. The availability of a flexible and intuitive interface further contributes to its usability and versatility. Comparisons between simulations and real-world experiments with different vehicles' configurations show the fidelity of the simulator results with respect to real-world settings. The experiments also show the simulator's benefit for the rapid prototyping and transitioning of aerial transportation and manipulation systems to real-world deployment.
- 24 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 831-850
RotorTM: A Flexible Simulator for Aerial Transportation and Manipulation
Low-cost autonomous micro aerial vehicles have great potential to help humans by simplifying and speeding up complex tasks, such as construction, package delivery, and search and rescue. These systems, which may consist of single or multiple vehicles, can be equipped with passive connection mechanisms, such as rigid links or cables for transportation and manipulation tasks. However, these systems are inherently complex. They are often underactuated and evolve in nonlinear manifold configuration spaces. In addition, the complexity escalates for systems with cable-suspended load due to the hybrid dynamics that vary with the cables' tension conditions. This article presents the first aerial transportation and manipulation simulator incorporating different payloads and passive connection mechanisms with full system dynamics, planning, and control algorithms. Furthermore, it includes a novel general model accounting for the transient hybrid dynamics for aerial systems with cable-suspended load to closely mimic real-world systems. The availability of a flexible and intuitive interface further contributes to its usability and versatility. Comparisons between simulations and real-world experiments with different vehicles' configurations show the fidelity of the simulator results with respect to real-world settings. The experiments also show the simulator's benefit for the rapid prototyping and transitioning of aerial transportation and manipulation systems to real-world deployment.
- Top Cited Papers
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (4) , 10256-10263
Physics-Inspired Temporal Learning of Quadrotor Dynamics for Accurate Model Predictive Trajectory Tracking
Accurately modeling quadrotor's system dynamics is critical for guaranteeing agile, safe, and stable navigation. The model needs to capture the system behavior in multiple flight regimes and operating conditions, including those producing highly nonlinear effects such as aerodynamic forces and torques, rotor interactions, or possible system configuration modifications. Classical approaches rely on handcrafted models and struggle to generalize and scale to capture these effects. In this letter, we present a novel Physics-Inspired Temporal Convolutional Network ( PI-TCN ) approach to learning quadrotor's system dynamics purely from robot experience. Our approach combines the expressive power of sparse temporal convolutions and dense feed-forward connections to make accurate system predictions. In addition, physics constraints are embedded in the training process to facilitate the network's generalization capabilities to data outside the training distribution. Finally, we design a model predictive control approach that incorporates the learned dynamics for accurate closed-loop trajectory tracking fully exploiting the learned model predictions in a receding horizon fashion. Experimental results demonstrate that our approach accurately extracts the structure of the quadrotor's dynamics from data, capturing effects that would remain hidden to classical approaches. To the best of our knowledge, this is the first time physics-inspired deep learning is successfully applied to temporal convolutional networks and to the system identification task, while concurrently enabling predictive control.
- 20 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 7 (4) , 10256-10263
Top Cited PapersPhysics-Inspired Temporal Learning of Quadrotor Dynamics for Accurate Model Predictive Trajectory Tracking
Accurately modeling quadrotor's system dynamics is critical for guaranteeing agile, safe, and stable navigation. The model needs to capture the system behavior in multiple flight regimes and operating conditions, including those producing highly nonlinear effects such as aerodynamic forces and torques, rotor interactions, or possible system configuration modifications. Classical approaches rely on handcrafted models and struggle to generalize and scale to capture these effects. In this letter, we present a novel Physics-Inspired Temporal Convolutional Network ( PI-TCN ) approach to learning quadrotor's system dynamics purely from robot experience. Our approach combines the expressive power of sparse temporal convolutions and dense feed-forward connections to make accurate system predictions. In addition, physics constraints are embedded in the training process to facilitate the network's generalization capabilities to data outside the training distribution. Finally, we design a model predictive control approach that incorporates the learned dynamics for accurate closed-loop trajectory tracking fully exploiting the learned model predictions in a receding horizon fashion. Experimental results demonstrate that our approach accurately extracts the structure of the quadrotor's dynamics from data, capturing effects that would remain hidden to classical approaches. To the best of our knowledge, this is the first time physics-inspired deep learning is successfully applied to temporal convolutional networks and to the system identification task, while concurrently enabling predictive control.