Marika Patronelli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marika Patronelli has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Caterina Casavola
Department of Mechanics, Mathematics, and Management, Polytechnic University of Bari, 70126 Bari, Italy
5 shared publications - Giovanni Pappalettera
Dipartimento di Meccanica, Matematica e Management, Politecnico di Bari, Via E. Orabona 4, 70125 Bari, Italy
5 shared publications - Vincenzo Moramarco
Dipartimento di Meccanica, Matematica e Management, Politecnico di Bari, Bari, Italy
4 shared publications - Lucia Del Core
Blackshape S.p.A, Monopoli, Italy
3 shared publications Carmine Pappalettere
Politecnico di Bari, Dipartimento di Meccanica Matematica e Management, Via Orabona 4, 70125, Bari, Italy
1 shared publicationCaterina Casavola
Politecnico di Bari, Dipartimento di Meccanica Matematica e Management, Via Orabona 4, 70125, Bari, Italy
1 shared publication
Latest Publications
- Open Access
- 14 September 2026
- Published by Elsevier in SSRN Electronic Journal
DIC mechanical characterization of FeCoPSi bonded magnets
This study is framed within the search for innovative rare-earth-free magnetic materials aimed at reducing the dependence on NdFeB magnets in automotive applications. In this context, an innovative FeCoPSi-based ferromagnetic powder is introduced as a filler in elastomer-bonded magnets based on nitrile butadiene rubber (NBR) and chlorinated polyethylene (CPE). This powder belongs to a class of rare-earth-free magnetic materials with intermediate performance between conventional ferrites and NdFeB magnets, and it is compared here with ferrite in terms of mechanical behaviour. The mechanical response of the developed bonded magnets is investigated through uniaxial tensile tests. In addition, 3D digital image correlation (DIC) is employed as a full-field, non-contact technique to acquire displacement maps and strain fields. The study allows a comparison between the two elastomeric binders, NBR and CPE, and between the two magnetic fillers, FeCoPSi and ferrite. The influence of FeCoPSi particle size is also assessed by comparing batches prepared with coarser and finer particle size distributions. The mechanical response is strongly affected by the elastomeric binder: CPE provides an overall enhancement of the tensile response with respect to NBR. Particle size also proves to be a key parameter: the finer FeCoPSi powder promotes higher mechanical performance than the coarser one, suggesting a more effective interaction between the elastomeric binder and the filler.
- 14 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDIC mechanical characterization of FeCoPSi bonded magnets
This study is framed within the search for innovative rare-earth-free magnetic materials aimed at reducing the dependence on NdFeB magnets in automotive applications. In this context, an innovative FeCoPSi-based ferromagnetic powder is introduced as a filler in elastomer-bonded magnets based on nitrile butadiene rubber (NBR) and chlorinated polyethylene (CPE). This powder belongs to a class of rare-earth-free magnetic materials with intermediate performance between conventional ferrites and NdFeB magnets, and it is compared here with ferrite in terms of mechanical behaviour. The mechanical response of the developed bonded magnets is investigated through uniaxial tensile tests. In addition, 3D digital image correlation (DIC) is employed as a full-field, non-contact technique to acquire displacement maps and strain fields. The study allows a comparison between the two elastomeric binders, NBR and CPE, and between the two magnetic fillers, FeCoPSi and ferrite. The influence of FeCoPSi particle size is also assessed by comparing batches prepared with coarser and finer particle size distributions. The mechanical response is strongly affected by the elastomeric binder: CPE provides an overall enhancement of the tensile response with respect to NBR. Particle size also proves to be a key parameter: the finer FeCoPSi powder promotes higher mechanical performance than the coarser one, suggesting a more effective interaction between the elastomeric binder and the filler.
- 14 April 2024
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 32 (2) , 139-152
Shear characterization in soft polyurethane foams: A critical comparison among experimental approaches
ASTM_25Block Shear Test ASTM C273 with a specimens’ thickness of 25 mmASTM_50Block Shear Test ASTM C273 with a specimens’ thickness of 50 mmBST_25Block Shear BS 4370-2 with a specimens’ thickness o...
- 14 April 2024
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 32 (2) , 139-152
Shear characterization in soft polyurethane foams: A critical comparison among experimental approaches
ASTM_25Block Shear Test ASTM C273 with a specimens’ thickness of 25 mmASTM_50Block Shear Test ASTM C273 with a specimens’ thickness of 50 mmBST_25Block Shear BS 4370-2 with a specimens’ thickness o...
- Open Access
- 11 August 2022
- Published by MDPI AG in Physical Sciences Forum
- Vol. 4 (1) , 20
Full-Field Experimental Study and Numerical Modeling of Soft Polyurethane Foam Subjected to Cyclic Loading
In this study, the responses of three soft open cell polyurethane foam samples (85, 63 and 46 kg/m3) subjected to four incremental cyclic compression load steps of 20%, 40%, 60%, and 80% strain are analyzed by digital image correlation. Facing large deformation, the foam behavior is investigated in terms of engineering and true strain curves. Poisson’s ratio is studied by a tangent Poisson function which is able to capture the instantaneous behavior of the foam. Experimental displacement maps, stress–strain, and axial vs. transverse strain curves are compared in terms of numerical results obtained by FEM analysis for ν = 0 and ν ≠ 0.
- 11 August 2022
- Published by MDPI AG in Physical Sciences Forum
- Vol. 4 (1) , 20
Open AccessFull-Field Experimental Study and Numerical Modeling of Soft Polyurethane Foam Subjected to Cyclic Loading
In this study, the responses of three soft open cell polyurethane foam samples (85, 63 and 46 kg/m3) subjected to four incremental cyclic compression load steps of 20%, 40%, 60%, and 80% strain are analyzed by digital image correlation. Facing large deformation, the foam behavior is investigated in terms of engineering and true strain curves. Poisson’s ratio is studied by a tangent Poisson function which is able to capture the instantaneous behavior of the foam. Experimental displacement maps, stress–strain, and axial vs. transverse strain curves are compared in terms of numerical results obtained by FEM analysis for ν = 0 and ν ≠ 0.
- 21 July 2022
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 134, 105391
A full-field DIC analysis of the mechanical-deformation behavior of polyethylene terephthalate glycol (PET-G) aligners
- 21 July 2022
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 134, 105391
A full-field DIC analysis of the mechanical-deformation behavior of polyethylene terephthalate glycol (PET-G) aligners
- 25 October 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (28) , 7172-7188
Experimental and numerical analysis of the Poisson’s ratio on soft polyurethane foams under tensile and cyclic compression load
In this paper results on the evolution of Poisson’s ratio under tensile and cyclic compression on low-density soft open-cell polyurethane foams (85, 63, 46 kg/m3) up to 80% of strain are presented as obtained by full-field deformation measurements. The Poisson’s ratio was investigated using a Poisson’s function and a tangent Poisson’s function formulation, more capable to capture the instantaneous behavior of the foam and a possible auxetic behavior. The displacements’ maps and the stress-strain curves obtained experimentally by digital image correlation are compared with the numerical results of the FEM analysis obtained for ν = 0 and ν ≠ 0.
- 25 October 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (28) , 7172-7188
Experimental and numerical analysis of the Poisson’s ratio on soft polyurethane foams under tensile and cyclic compression load
In this paper results on the evolution of Poisson’s ratio under tensile and cyclic compression on low-density soft open-cell polyurethane foams (85, 63, 46 kg/m3) up to 80% of strain are presented as obtained by full-field deformation measurements. The Poisson’s ratio was investigated using a Poisson’s function and a tangent Poisson’s function formulation, more capable to capture the instantaneous behavior of the foam and a possible auxetic behavior. The displacements’ maps and the stress-strain curves obtained experimentally by digital image correlation are compared with the numerical results of the FEM analysis obtained for ν = 0 and ν ≠ 0.
- 28 March 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (24) , 3540-3555
Full-field mechanical characterization of polyurethane foams under large deformations by digital image correlation
In this work the response of soft open-cell polyurethane foams with three different densities, respectively of 85, 63 and 46 kg/m3, were obtained by quasi-static tensile, shear and cyclic compression tests. The presence of an intrinsic random pattern inside the material given by the small black dot of expanded graphite, that makes it fireproof, allowed to detect large displacement fields exploiting digital image correlation technique, without painting the surface to quantify the full-field displacement of the samples. The displacements’ maps, the strain fields and the stress-strain curves obtained by digital image correlation allowed the analysis and the evaluation of the mechanical properties.
- 28 March 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (24) , 3540-3555
Full-field mechanical characterization of polyurethane foams under large deformations by digital image correlation
In this work the response of soft open-cell polyurethane foams with three different densities, respectively of 85, 63 and 46 kg/m3, were obtained by quasi-static tensile, shear and cyclic compression tests. The presence of an intrinsic random pattern inside the material given by the small black dot of expanded graphite, that makes it fireproof, allowed to detect large displacement fields exploiting digital image correlation technique, without painting the surface to quantify the full-field displacement of the samples. The displacements’ maps, the strain fields and the stress-strain curves obtained by digital image correlation allowed the analysis and the evaluation of the mechanical properties.