Yuki Suga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuki Suga has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Hideto Matsuyama
Research Center for Membrane and Film Technology, Department of Chemical Science and Engineering, Kobe University, Kobe 657-8501, Japan
2 shared publications - Ryosuke Takagi
Research Center for Membrane and Film Technology, Kobe University, Kobe 657-8501, Japan
2 shared publications
Latest Publications
- Open Access
Recovery of Valuable Solutes from Organic Solvent/Water Mixtures via Direct Contact Membrane Distillation (DCMD) as a Non-Heated Process
Recently, the demand for the recovery of valuable solutes from organic solvents/water mixtures has increased in various fields. Furthermore, due to the abundance of heat-sensitive valuable solutes, the demand for non-heated concentration technologies has increased. In this study, the direct contact membrane distillation (DCMD) using hydrophobic polyvinylidene difluoride (PVDF) hollow fiber membranes was investigated to confirm the possibility of recovering valuable solutes from organic solvents/water mixtures as a non-heated process. The DCMD with 1000 ppm NaCl aqueous solution achieved 0.8 kg/m2·h of vapor flux and >99.9% of NaCl retention, even at feed and coolant temperatures of 25 and 10 °C, respectively. Furthermore, when DCMD was conducted under various conditions, including feed temperatures of 25, 35 and 45 °C, and organic solvent concentration of 15, 30 and 50 wt%, using ethanol/water and acetonitrile/water mixtures containing 1000 ppm NaCl. A surfactant was also used as a valuable solute, in addition to NaCl. As a result, it was found that the total vapor flux increased with increasing temperature and concentration of organic solvents, as the partial vapor pressure of the organic solvents increased. Additionally, no solute leaked under any condition, even when the surfactant was used as a valuable solute.
Open AccessRecovery of Valuable Solutes from Organic Solvent/Water Mixtures via Direct Contact Membrane Distillation (DCMD) as a Non-Heated Process
Recently, the demand for the recovery of valuable solutes from organic solvents/water mixtures has increased in various fields. Furthermore, due to the abundance of heat-sensitive valuable solutes, the demand for non-heated concentration technologies has increased. In this study, the direct contact membrane distillation (DCMD) using hydrophobic polyvinylidene difluoride (PVDF) hollow fiber membranes was investigated to confirm the possibility of recovering valuable solutes from organic solvents/water mixtures as a non-heated process. The DCMD with 1000 ppm NaCl aqueous solution achieved 0.8 kg/m2·h of vapor flux and >99.9% of NaCl retention, even at feed and coolant temperatures of 25 and 10 °C, respectively. Furthermore, when DCMD was conducted under various conditions, including feed temperatures of 25, 35 and 45 °C, and organic solvent concentration of 15, 30 and 50 wt%, using ethanol/water and acetonitrile/water mixtures containing 1000 ppm NaCl. A surfactant was also used as a valuable solute, in addition to NaCl. As a result, it was found that the total vapor flux increased with increasing temperature and concentration of organic solvents, as the partial vapor pressure of the organic solvents increased. Additionally, no solute leaked under any condition, even when the surfactant was used as a valuable solute.
- Open Access
Effect of the Characteristic Properties of Membrane on Long-Term Stability in the Vacuum Membrane Distillation Process
Membrane distillation (MD) is a technology that can treat feed solutions with higher osmotic pressure, as well as produce high-purity water. However, the water production cost of the MD process is expensive. In this study, to decrease the water production cost, we attempted to evaluate the effect of membrane characteristics on the long-term stability of a vacuum MD (VMD) system. We fabricated four different types of polyvinylidene difluoride hollow fiber membranes, and operated a VMD system with 3.5 wt% NaCl aqueous solution at 65 °C as a feed under 11 kPa of air gap pressure. Consequently, in the proposed VMD system, it is found that the liquid entry pressure (LEP) is the most important factor. When LEP was higher than 0.37 MPa, the pilot-scale module was very stable for long-term operations, and the vapor flux was approximately 19.3 kg/m2·h with a total salt retention factor of over 99.9% during the 300-h operation.
Open AccessEffect of the Characteristic Properties of Membrane on Long-Term Stability in the Vacuum Membrane Distillation Process
Membrane distillation (MD) is a technology that can treat feed solutions with higher osmotic pressure, as well as produce high-purity water. However, the water production cost of the MD process is expensive. In this study, to decrease the water production cost, we attempted to evaluate the effect of membrane characteristics on the long-term stability of a vacuum MD (VMD) system. We fabricated four different types of polyvinylidene difluoride hollow fiber membranes, and operated a VMD system with 3.5 wt% NaCl aqueous solution at 65 °C as a feed under 11 kPa of air gap pressure. Consequently, in the proposed VMD system, it is found that the liquid entry pressure (LEP) is the most important factor. When LEP was higher than 0.37 MPa, the pilot-scale module was very stable for long-term operations, and the vapor flux was approximately 19.3 kg/m2·h with a total salt retention factor of over 99.9% during the 300-h operation.