Laura Rehm
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Laura Rehm has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Andrew D. Kent
New York University
8 shared publications B. Kardasz
Spin Memory Inc., Fremont, California 94538, USA
2 shared publicationsG. Wolf
Spin Memory Inc., Fremont, California 94538, USA
2 shared publicationsM. Pinarbasi
Spin Memory Inc., Fremont, California 94538, USA
2 shared publicationsMustafa Pinarbasi
Spin Memory Inc 94538 Fremont California USA
2 shared publications- Mustafa Pinarbasi
Spin Memory Inc 5 ., Fremont, California 94538, USA
2 shared publications
Latest Publications
- Open Access
- 18 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 15 (1949307X) , 1-4
One Trillion True Random Bits Generated With a Field-Programmable Gate Array Actuated Magnetic Tunnel Junction
Large quantities of random numbers are crucial in a wide range of applications. We have recently demonstrated that perpendicular nanopillar magnetic tunnel junctions (pMTJs) can produce true random bits when actuated with short pulses. However, our implementation used high-end and expensive electronics, such as a high bandwidth arbitrary waveform generator and analog-to-digital converter, and was limited to relatively low data rates. Here, we significantly increase the speed of true random number generation (TRNG) of our stochastic actuated pMTJs (SMART-pMTJs) using Field Programmable Gate Arrays (FPGAs), demonstrating the generation of over $10^{12}$ bits at rates exceeding 10Mb/s. The resulting bitstreams pass the NIST Statistical Test Suite for randomness with only one XOR operation. In addition to a hundred-fold reduction in the setup cost and a thousand-fold increase in bitrate, the advancement includes simplifying and optimizing random bit generation with a custom-designed analog daughter board to interface an FPGA and SMART-pMTJ. The resulting setup further enables FPGA at-speed processing of MTJ data for stochastic modeling and cryptography.
- 18 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Magnetics Letters
- Vol. 15 (1949307X) , 1-4
Open AccessOne Trillion True Random Bits Generated With a Field-Programmable Gate Array Actuated Magnetic Tunnel Junction
Large quantities of random numbers are crucial in a wide range of applications. We have recently demonstrated that perpendicular nanopillar magnetic tunnel junctions (pMTJs) can produce true random bits when actuated with short pulses. However, our implementation used high-end and expensive electronics, such as a high bandwidth arbitrary waveform generator and analog-to-digital converter, and was limited to relatively low data rates. Here, we significantly increase the speed of true random number generation (TRNG) of our stochastic actuated pMTJs (SMART-pMTJs) using Field Programmable Gate Arrays (FPGAs), demonstrating the generation of over $10^{12}$ bits at rates exceeding 10Mb/s. The resulting bitstreams pass the NIST Statistical Test Suite for randomness with only one XOR operation. In addition to a hundred-fold reduction in the setup cost and a thousand-fold increase in bitrate, the advancement includes simplifying and optimizing random bit generation with a custom-designed analog daughter board to interface an FPGA and SMART-pMTJ. The resulting setup further enables FPGA at-speed processing of MTJ data for stochastic modeling and cryptography.
- Open Access
- 29 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (5)
Temperature-resilient random number generation with stochastic actuated magnetic tunnel junction devices
Nanoscale magnetic tunnel junction (MTJ) devices can efficiently convert thermal energy in the environment into random bitstreams for computational modeling and cryptography. We recently showed that perpendicular MTJs actuated by nanosecond pulses can generate true random numbers at high data rates. Here, we explore the dependence of probability bias—the deviations from equal probability (50/50) 0/1 bit outcomes—of such devices on temperature, pulse amplitude, and duration. Our experimental results and device model demonstrate that operation with nanosecond pulses in the ballistic limit minimizes variation of probability bias with temperature to be far lower than that of devices operated with longer-duration pulses. Furthermore, operation in the short-pulse limit reduces the bias variation with pulse amplitude while rendering the device more sensitive to pulse duration. These results are significant for designing true random number generator MTJ circuits and establishing operating conditions.
- 29 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (5)
Open AccessTemperature-resilient random number generation with stochastic actuated magnetic tunnel junction devices
Nanoscale magnetic tunnel junction (MTJ) devices can efficiently convert thermal energy in the environment into random bitstreams for computational modeling and cryptography. We recently showed that perpendicular MTJs actuated by nanosecond pulses can generate true random numbers at high data rates. Here, we explore the dependence of probability bias—the deviations from equal probability (50/50) 0/1 bit outcomes—of such devices on temperature, pulse amplitude, and duration. Our experimental results and device model demonstrate that operation with nanosecond pulses in the ballistic limit minimizes variation of probability bias with temperature to be far lower than that of devices operated with longer-duration pulses. Furthermore, operation in the short-pulse limit reduces the bias variation with pulse amplitude while rendering the device more sensitive to pulse duration. These results are significant for designing true random number generator MTJ circuits and establishing operating conditions.
- 13 February 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (2) , 024035
Stochastic Magnetic Actuated Random Transducer Devices Based on Perpendicular Magnetic Tunnel Junctions
True random number generators are of great interest in many computing applications, such as cryptography, neuromorphic systems, and Monte Carlo simulations. Here, we investigate perpendicular magnetic-tunnel-junction nanopillars (pMTJs) activated by short-duration (nanosecond) pulses in the ballistic limit for such applications. In this limit, a pulse can transform the Boltzmann distribution of initial free-layer magnetization states into randomly magnetized down or up states, i.e., a bit that is 0 or 1, easily determined by measurement of the tunnel resistance of the junction. It is demonstrated that bit streams with millions of events: (1) are very well approximated by a normal distribution; (2) pass multiple statistical tests for true randomness, including all the National Institute of Standards and Technology tests for random number generators with only one xor operation; (3) can be used to create a uniform distribution of 8-bit random numbers; and (4) can have no drift in the bit probability with time. The results presented here show that pMTJs operated in the ballistic regime can generate true random numbers at around 50-MHz bit rates, while being more robust to environmental changes, such as their operating temperature, compared to other stochastic nanomagnetic devices.
- 13 February 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (2) , 024035
Stochastic Magnetic Actuated Random Transducer Devices Based on Perpendicular Magnetic Tunnel Junctions
True random number generators are of great interest in many computing applications, such as cryptography, neuromorphic systems, and Monte Carlo simulations. Here, we investigate perpendicular magnetic-tunnel-junction nanopillars (pMTJs) activated by short-duration (nanosecond) pulses in the ballistic limit for such applications. In this limit, a pulse can transform the Boltzmann distribution of initial free-layer magnetization states into randomly magnetized down or up states, i.e., a bit that is 0 or 1, easily determined by measurement of the tunnel resistance of the junction. It is demonstrated that bit streams with millions of events: (1) are very well approximated by a normal distribution; (2) pass multiple statistical tests for true randomness, including all the National Institute of Standards and Technology tests for random number generators with only one xor operation; (3) can be used to create a uniform distribution of 8-bit random numbers; and (4) can have no drift in the bit probability with time. The results presented here show that pMTJs operated in the ballistic regime can generate true random numbers at around 50-MHz bit rates, while being more robust to environmental changes, such as their operating temperature, compared to other stochastic nanomagnetic devices.
- Open Access
Stochastic magnetic actuated random transducer devices based on perpendicular magnetic tunnel junctions
True random number generators are of great interest in many computing applications such as cryptography, neuromorphic systems and Monte Carlo simulations. Here we investigate perpendicular magnetic tunnel junction nanopillars (pMTJs) activated by short duration (ns) pulses in the ballistic limit for such applications. In this limit, a pulse can transform the Boltzmann distribution of initial free layer magnetization states into randomly magnetized down or up states, i.e. a bit that is 0 or 1, easily determined by measurement of the junction's tunnel resistance. It is demonstrated that bitstreams with millions of events: 1) are very well described by the binomial distribution; 2) can be used to create a uniform distribution of 8-bit random numbers; 3) pass multiple statistical tests for true randomness, including all the National Institute of Standards tests for random number generators with only one XOR operation; and 4) can have no drift in the bit probability with time. The results presented here show that pMTJs operated in the ballistic regime can generate true random numbers at GHz bitrates, while being more robust to environmental changes, such as their operating temperature, compared to other stochastic nanomagnetic devices.
Open AccessStochastic magnetic actuated random transducer devices based on perpendicular magnetic tunnel junctions
True random number generators are of great interest in many computing applications such as cryptography, neuromorphic systems and Monte Carlo simulations. Here we investigate perpendicular magnetic tunnel junction nanopillars (pMTJs) activated by short duration (ns) pulses in the ballistic limit for such applications. In this limit, a pulse can transform the Boltzmann distribution of initial free layer magnetization states into randomly magnetized down or up states, i.e. a bit that is 0 or 1, easily determined by measurement of the junction's tunnel resistance. It is demonstrated that bitstreams with millions of events: 1) are very well described by the binomial distribution; 2) can be used to create a uniform distribution of 8-bit random numbers; 3) pass multiple statistical tests for true randomness, including all the National Institute of Standards tests for random number generators with only one XOR operation; and 4) can have no drift in the bit probability with time. The results presented here show that pMTJs operated in the ballistic regime can generate true random numbers at GHz bitrates, while being more robust to environmental changes, such as their operating temperature, compared to other stochastic nanomagnetic devices.
- 30 March 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 15 (3) , 034088
Thermal Effects in Spin-Torque Switching of Perpendicular Magnetic Tunnel Junctions at Cryogenic Temperatures
Temperature plays an important role in spin-torque switching of magnetic tunnel junctions, causing magnetization fluctuations that decrease the switching voltage but also introduce switching errors. Here we present a systematic study of the temperature dependence of the spin-torque-switching probability of state-of-the-art perpendicular-magnetic-tunnel-junction nanopillars (40–60 nm in diameter) from room temperature down to 4 K, sampling up to a million switching events. The junction temperature at the switching voltage—obtained from the thermally assisted spin-torque-switching model—saturates at temperatures below about 75 K, showing that junction heating is significant below this temperature and that spin-torque switching remains highly stochastic down to 4 K. A model of heat flow in a nanopillar junction shows this effect is associated with the reduced thermal conductivity and heat capacity of the metals in the junction.
- 30 March 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 15 (3) , 034088
Thermal Effects in Spin-Torque Switching of Perpendicular Magnetic Tunnel Junctions at Cryogenic Temperatures
Temperature plays an important role in spin-torque switching of magnetic tunnel junctions, causing magnetization fluctuations that decrease the switching voltage but also introduce switching errors. Here we present a systematic study of the temperature dependence of the spin-torque-switching probability of state-of-the-art perpendicular-magnetic-tunnel-junction nanopillars (40–60 nm in diameter) from room temperature down to 4 K, sampling up to a million switching events. The junction temperature at the switching voltage—obtained from the thermally assisted spin-torque-switching model—saturates at temperatures below about 75 K, showing that junction heating is significant below this temperature and that spin-torque switching remains highly stochastic down to 4 K. A model of heat flow in a nanopillar junction shows this effect is associated with the reduced thermal conductivity and heat capacity of the metals in the junction.
- Open Access
- 28 October 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (18) , 182404
Sub-nanosecond spin-torque switching of perpendicular magnetic tunnel junction nanopillars at cryogenic temperatures
Spin-transfer magnetic random access memory devices are of significant interest for cryogenic computing systems where a persistent, fast, low-energy consuming, and nanometer scale device operating at low temperature is needed. Here, we report the low-temperature nanosecond duration spin-transfer switching characteristics of perpendicular magnetic tunnel junction (pMTJ) nanopillar devices (40–60 nm in diameter) and contrast them to their room temperature properties. Interestingly, the characteristic switching time decreases with temperature, with the largest reduction occurring between room temperature and 150 K. The switching energy increases with decreasing temperature, but still compares very favorably with other types of spin-transfer devices at 4 K, with –5 with 4 ns pulses at 4 K. Our results demonstrate the promise of pMTJ devices for cryogenic applications and show routes to further device optimization.
- 28 October 2019
- Published by AIP Publishing in Applied Physics Letters
- Vol. 115 (18) , 182404
Open AccessSub-nanosecond spin-torque switching of perpendicular magnetic tunnel junction nanopillars at cryogenic temperatures
Spin-transfer magnetic random access memory devices are of significant interest for cryogenic computing systems where a persistent, fast, low-energy consuming, and nanometer scale device operating at low temperature is needed. Here, we report the low-temperature nanosecond duration spin-transfer switching characteristics of perpendicular magnetic tunnel junction (pMTJ) nanopillar devices (40–60 nm in diameter) and contrast them to their room temperature properties. Interestingly, the characteristic switching time decreases with temperature, with the largest reduction occurring between room temperature and 150 K. The switching energy increases with decreasing temperature, but still compares very favorably with other types of spin-transfer devices at 4 K, with –5 with 4 ns pulses at 4 K. Our results demonstrate the promise of pMTJ devices for cryogenic applications and show routes to further device optimization.
- Open Access
Sub-nanosecond spin-torque switching of perpendicular magnetic tunnel junction nanopillars at cryogenic temperatures
Spin-transfer magnetic random access memory is of significant interest for cryogenic applications where a persistent, fast, low-energy consumption and high device density is needed. Here we report the low-temperature nanosecond duration spin-transfer switching characteristics of perpendicular magnetic tunnel junction (pMTJ) nanopillar devices (40 to 60 nm in diameter) and contrast them to their room temperature properties. Interestingly, at fixed pulse voltage overdrive the characteristic switching time decreases with temperature, in contrast to macrospin model predictions, with the largest reduction in switching time occurring between room temperature and 150 K. The switching energy increases with decreasing temperature, but still compares very favorably to other types of spin-transfer devices at 4 K, with < 300 fJ required per switch. Write error rate (WER) measurements show highly reliable (WER <= 5x10^-5 with 4 ns pulses at 4 K) demonstrating the promise of pMTJ devices for cryogenic applications and routes to further device optimization.
Open AccessSub-nanosecond spin-torque switching of perpendicular magnetic tunnel junction nanopillars at cryogenic temperatures
Spin-transfer magnetic random access memory is of significant interest for cryogenic applications where a persistent, fast, low-energy consumption and high device density is needed. Here we report the low-temperature nanosecond duration spin-transfer switching characteristics of perpendicular magnetic tunnel junction (pMTJ) nanopillar devices (40 to 60 nm in diameter) and contrast them to their room temperature properties. Interestingly, at fixed pulse voltage overdrive the characteristic switching time decreases with temperature, in contrast to macrospin model predictions, with the largest reduction in switching time occurring between room temperature and 150 K. The switching energy increases with decreasing temperature, but still compares very favorably to other types of spin-transfer devices at 4 K, with < 300 fJ required per switch. Write error rate (WER) measurements show highly reliable (WER <= 5x10^-5 with 4 ns pulses at 4 K) demonstrating the promise of pMTJ devices for cryogenic applications and routes to further device optimization.
- Open Access
- 15 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 27 (4) , 1-4
Analysis of Multilayer Devices for Superconducting Electronics by High-Resolution Scanning Transmission Electron Microscopy and Energy Dispersive Spectroscopy
A focused ion beam was used to obtain cross-sectional specimens from both magnetic multilayer and Nb/Al-AlOx/Nb Josephson junction devices for characterization by scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDX). Automated multivariate statistical analysis of the EDX spectral images produced chemically unique component images of individual layers within the multilayer structures. STEM imaging elucidated distinct variations in film morphology, interface quality, and/or etch artifacts that could be correlated to magnetic and/or electrical properties measured on the same devices.
- 15 February 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 27 (4) , 1-4
Open AccessAnalysis of Multilayer Devices for Superconducting Electronics by High-Resolution Scanning Transmission Electron Microscopy and Energy Dispersive Spectroscopy
A focused ion beam was used to obtain cross-sectional specimens from both magnetic multilayer and Nb/Al-AlOx/Nb Josephson junction devices for characterization by scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDX). Automated multivariate statistical analysis of the EDX spectral images produced chemically unique component images of individual layers within the multilayer structures. STEM imaging elucidated distinct variations in film morphology, interface quality, and/or etch artifacts that could be correlated to magnetic and/or electrical properties measured on the same devices.