Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carles Domènech-Mestres has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Robotics and GPR in Agriculture

    by Vega Perez-Gracia, Nuria Rodriguez, Marc Sánchez Atienza, David Caballero, Adriano Liso, Carles Domènech

    Ground Penetrating Radar (GPR) has become a valuable tool in precision agriculture for subsurface analysis. This work presents the adaptation of GPR to an autonomous robot that is being designed for agricultural tasks, capable of mapping the terrain using both Lidar and Computer Vision (CV) technologies. The integration of these systems will allow the robot to navigate autonomously while collecting data for mapping the surface and subsurface of the soil. The study focuses on the use of GPR data detect changes in the water content, enabling the robot to create detailed moisture maps of the shallow subsurface, providing insights into soil hydration levels. An additional objective is to enable the data collected by the robot to generate root maps, essential for understanding root growth and distribution. To achieve this, the aim is to determine the most effective method for detecting roots using GPR. The initial results of the project highlight the potential of autonomous robots equipped with GPR for optimizing agricultural practices, enhancing efficiency in field analysis and improving decision-making processes.


  • Open Access

    Design of a Gravity Ropeway in Nepal: A Methodological Analysis for Appropriate Technologies

    by Elena Blanco-Romero, Carles Domènech-Mestres, Manuel Ayala-Chauvin

    This article describes the complete development of a design project for a context-integrated appropriate technology, a gravity ropeway for transporting agricultural products in remote areas of Nepal. The main purpose was to improve and optimize existing gravity ropeway designs, prioritizing simplicity, safety, and local manufacturability and maintenance. The design process followed a phased methodological approach used in machine design, which included stages of definition, conceptual design, materialization, and detailed design. The results of the ropeway installation demonstrate a reduction in the time and effort required by farmers to transport their products, consequently leading to a significant improvement in their quality of life. Despite the methodology followed, deficiencies were identified in the project execution procedure: lack of documentation and lack of explicit consideration of the local context in the design specifications, which could compromise the continuity and success of the project. This analysis highlights the need to adapt traditional design methodologies to appropriate technology projects. Specific procedures that address the characteristics of the local environment should be included to integrate the design into the context and accurately determine the needs of users in development projects.


  • Open Access

    Driving Strategies for Omnidirectional Mobile Robots with Offset Differential Wheels

    by Joan Badia Torres, Alba Perez Gracia, Carles Domenech-Mestres

    In this work, we present an analysis of, as well as driving strategies and design considerations for, a type of omnidirectional mobile robot: the offset-differential robot. This system presents omnidirectionality while using any type of standard wheel, allowing for applications in uneven and rough terrains, as well as cluttered environments. The known fact that these robots, as well as simple differential robots, have an unstable driving zone, has mostly been dealt with by designing driving strategies in the stable zone of internal dynamics. However, driving in the unstable zone may be advantageous when dealing with rough and uneven terrains. This work is based on the full kinematic and dynamic analysis of a robot, including its passive elements, to explain the unexpected behaviors that appear during its motion due to instability. Precise torque calculations taking into account the configuration of the passive elements were performed for better torque control, and design recommendations are included. The stable and unstable behaviors were characterized, and driving strategies were described in order to achieve the desired performance regarding precise positioning and speed. The model and driving strategies were validated through simulations and experimental testing. This work lays the foundation for the design of better control strategies for offset-differential robots.


  • Open Access

    Driving Strategies for Omnidirectional Mobile Robots with Offset Differential Wheels

    by Joan Badia Torres, Alba Perez Gracia, Carles Domenech

    In this work we present some driving strategies for a type of omnidirectional mobile robot, the offset-differential robot. This system presents omnidirectionality while using any type of standard wheels, allowing for applications in all terrain. The work is based on the full kinematic and dynamic analysis of the robot, including the passive elements, to explain some unexpected behaviors that appear during its motion. The stable and unstable behaviors are characterized and some driving strategies are stated in order to achieve the desired performance regarding precise positioning and speed.

  • Control System Test Platform for a DC Motor

    by Fernando Saá-Tapia, Luis Mayorga-Miranda, Manuel Ayala-Chauvin, Carles Domènech-Mestres


  • IoT Monitoring for Real-Time Control of Industrial Processes

    by Manuel Ayala-Chauvin, Pedro Escudero, Patricio Lara-Alvarez, Carles Domènech-Mestres


  • Open Access

    Industrial Robots Fuel Cell Based Hybrid Power-Trains: A Comparison between Different Configurations

    by Germán Andrés Ramos, Tomàs Montobbio de Pérez-Cabrero, Carles Domènech-Mestres, Ramon Costa-Castelló

    Electric vehicles are becoming more and more popular. One of the most promising possible solutions is one where a hybrid powertrain made up of a FC (Fuel Cell) and a battery is used. This type of vehicle offers great autonomy and high recharging speed, which makes them ideal for many industrial applications. In this work, three ways to build a hybrid power-train are presented and compared. To illustrate this, the case of an industrial robot designed to move loads within a fully automated factory is used. The analysis and comparison are carried out through different objective criteria that indicate the power-train performance in different battery charge levels. The hybrid configurations are tested using real power profiles of the industrial robot. Finally, simulation results show the performance of each hybrid configuration in terms of hydrogen consumption, battery and FC degradation, and dc bus voltage and current regulation.


  • Design and Construction of a Low Cost CNC Milling Machine for Woodworking

    by Manuel Ayala-Chauvin, Fernando Saá, Ricardo Rodríguez, Carles Domènech-Mestres, Genís Riba-Sanmartí


  • Open Access

    Design for the Automation of an AMBU Spur II Manual Respirator

    by Carles Domènech-Mestres, Elena Blanco-Romero, Albert de la Fuente-Morató, Manuel Ayala-Chauvin

    This article shows the design of a device to automatize an Ambu Spur II manual respirator. The aim of this compassionate medicine device is to provide an emergency alternative to conventional electric respirators—which are in much shortage—during the present COVID-19 pandemic. To develop the device, the classical method of product design based on concurrent engineering has been employed. First, the specifications of the machine have been determined, including the function determining the air volume provided at every moment of the breathing cycle; second, an adequate compression mechanism has been designed; third, the control circuit of the motor has been determined, which can be operated via a touchscreen and which includes sensor feedback; fourth, the device has been materialized with readily available materials and market components, mostly of low cost; and fifth, the machine has been successfully tested, complying with sanitary regulations and operating within desirable ranges. The device has been already manufactured to supply respirators to several hospitals around the Catalan Autonomous Community in Spain, but can also be replicated in developing countries such as Ecuador.


  • Novel Ball Head Screw and Screwdriver Design for Implant-Supported Prostheses With Angled Channels: A Finite Element Analysis

    by Oriol Farré-Berga, Iñaki Cercadillo-Ibarguren, Alba Sánchez-Torres, Carles Domènech-Mestres, F. Javier Gil, Tomás Escuin, Esther Berástegui

    The primary objective of this study was to design the optimal geometry of a novel screwdriver, create the grooves on a ball head screw, and demonstrate its resistance to a torque of up to 40 Ncm at angulations of 0°, 15°, and 30° by using nonlinear finite element analysis. A secondary objective was to create a foolproof, easily recognizable system. The grooved ball head screw and geometry of the screwdriver, functioning from an angulation of 0° to 30°, was generated using Pro-ENGINEER Wildfire 5.0 software. Static structural analyses among bodies in contact were performed at different angles of 0°, 15°, and 30° at a torque of 20 Ncm and 40 Ncm using nonlinear finite element simulation by means of ANSYS 12.0. The maximum stress supported by the ball head screw and screwdriver was similar at 20 Ncm and 40 Ncm. Although greater deformations were found at 40 Ncm, these were small and might not affect the performance of the system. Further, the rupture torque value for the M2 connection was 55 Ncm for 0° and 30°, and 47.5 Ncm for 15°. Numerical simulation showed that the ball head system design can achieve the mechanical strength requirements expected for screws used in implant-supported restorations at an angulation of up to 30°. Finite element analysis showed this novel ball head screw and screwdriver system to be a good solution for angled screw channels in implant-supported prostheses.