Lennart Gaus
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Lennart Gaus has a total of 131 co-authors. Here are the top co-authors by number of shared publications:
- Hans-Peter Schlenvoigt
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
9 shared publications - Karl Zeil
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
9 shared publications - Ulrich Schramm
Helmholtz-Zentrum Dresden-Rossendorf
9 shared publications - Thomas E. Cowan
Helmholtz-Zentrum Dresden-Rossendorf
8 shared publications - Thomas Kluge
Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany
8 shared publications - Florian Kroll
Helmholtz-Zentrum Dresden - Rossendorf, Dresden, 01328, Germany
7 shared publications
Latest Publications
- Open Access
- 3 September 2024
- Published by Springer Nature in Communications Physics
- Vol. 7 (1) , 1-10
Visualizing plasmons and ultrafast kinetic instabilities in laser-driven solids using X-ray scattering
Ultra-intense lasers that ionize atoms and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but X-ray scattering at keV photon energies allows for their visualization with femtosecond temporal resolution on the few nanometer mesoscale. Here, we perform such experiment on laser-driven flat silicon membranes that shows the development of structure with a dominant scale of 60 nm in the plane of the laser axis and laser polarization, and 95 nm in the vertical direction with a growth rate faster than 0.1 fs−1. Combining the XFEL experiments with simulations provides a complete picture of the structural evolution of ultra-fast laser-induced plasma density development, indicating the excitation of plasmons and a filamentation instability. Particle-in-cell simulations confirm that these signals are due to an oblique two-stream filamentation instability. These findings provide new insight into ultra-fast instability and heating processes in solids under extreme conditions at the nanometer level with possible implications for laser particle acceleration, inertial confinement fusion, and laboratory astrophysics.
- 3 September 2024
- Published by Springer Nature in Communications Physics
- Vol. 7 (1) , 1-10
Open AccessVisualizing plasmons and ultrafast kinetic instabilities in laser-driven solids using X-ray scattering
Ultra-intense lasers that ionize atoms and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but X-ray scattering at keV photon energies allows for their visualization with femtosecond temporal resolution on the few nanometer mesoscale. Here, we perform such experiment on laser-driven flat silicon membranes that shows the development of structure with a dominant scale of 60 nm in the plane of the laser axis and laser polarization, and 95 nm in the vertical direction with a growth rate faster than 0.1 fs−1. Combining the XFEL experiments with simulations provides a complete picture of the structural evolution of ultra-fast laser-induced plasma density development, indicating the excitation of plasmons and a filamentation instability. Particle-in-cell simulations confirm that these signals are due to an oblique two-stream filamentation instability. These findings provide new insight into ultra-fast instability and heating processes in solids under extreme conditions at the nanometer level with possible implications for laser particle acceleration, inertial confinement fusion, and laboratory astrophysics.
- Top Cited PapersOpen Access
- 13 May 2024
- Published by Springer Nature in Nature Physics
- Vol. 20 (7) , 1211-1216
Laser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high-peak current beams and are thus attracting attention as a compact alternative to conventional accelerators. However, achieving sufficiently high energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here we generate proton beams with a spectrally separated high-energy component of up to 150 MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive petawatt laser. The preceding laser light heats the target, leading to the onset of relativistically induced transparency upon main pulse arrival. The laser peak then penetrates the initially opaque target and triggers proton acceleration through a cascade of different mechanisms, as revealed by three-dimensional particle-in-cell simulations. The transparency of the target can be used to identify the high-performance domain, making it a suitable feedback parameter for automated laser and target optimization to enhance stability of plasma accelerators in the future.
- 13 May 2024
- Published by Springer Nature in Nature Physics
- Vol. 20 (7) , 1211-1216
Top Cited PapersOpen AccessLaser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high-peak current beams and are thus attracting attention as a compact alternative to conventional accelerators. However, achieving sufficiently high energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here we generate proton beams with a spectrally separated high-energy component of up to 150 MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive petawatt laser. The preceding laser light heats the target, leading to the onset of relativistically induced transparency upon main pulse arrival. The laser peak then penetrates the initially opaque target and triggers proton acceleration through a cascade of different mechanisms, as revealed by three-dimensional particle-in-cell simulations. The transparency of the target can be used to identify the high-performance domain, making it a suitable feedback parameter for automated laser and target optimization to enhance stability of plasma accelerators in the future.
- Open Access
- 7 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Ultra-short pulse laser acceleration of protons to 80 MeV from cryogenic hydrogen jets tailored to near-critical density
Laser plasma-based particle accelerators attract great interest in fields where conventional accelerators reach limits based on size, cost or beam parameters. Despite the fact that particle in cell simulations have predicted several advantageous ion acceleration schemes, laser accelerators have not yet reached their full potential in producing simultaneous high-radiation doses at high particle energies. The most stringent limitation is the lack of a suitable high-repetition rate target that also provides a high degree of control of the plasma conditions required to access these advanced regimes. Here, we demonstrate that the interaction of petawatt-class laser pulses with a pre-formed micrometer-sized cryogenic hydrogen jet plasma overcomes these limitations enabling tailored density scans from the solid to the underdense regime. Our proof-of-concept experiment demonstrates that the near-critical plasma density profile produces proton energies of up to 80 MeV. Based on hydrodynamic and three-dimensional particle in cell simulations, transition between different acceleration schemes are shown, suggesting enhanced proton acceleration at the relativistic transparency front for the optimal case.
- 7 July 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Open AccessUltra-short pulse laser acceleration of protons to 80 MeV from cryogenic hydrogen jets tailored to near-critical density
Laser plasma-based particle accelerators attract great interest in fields where conventional accelerators reach limits based on size, cost or beam parameters. Despite the fact that particle in cell simulations have predicted several advantageous ion acceleration schemes, laser accelerators have not yet reached their full potential in producing simultaneous high-radiation doses at high particle energies. The most stringent limitation is the lack of a suitable high-repetition rate target that also provides a high degree of control of the plasma conditions required to access these advanced regimes. Here, we demonstrate that the interaction of petawatt-class laser pulses with a pre-formed micrometer-sized cryogenic hydrogen jet plasma overcomes these limitations enabling tailored density scans from the solid to the underdense regime. Our proof-of-concept experiment demonstrates that the near-critical plasma density profile produces proton energies of up to 80 MeV. Based on hydrodynamic and three-dimensional particle in cell simulations, transition between different acceleration schemes are shown, suggesting enhanced proton acceleration at the relativistic transparency front for the optimal case.
- Open Access
- 19 May 2023
- Published by Springer Nature in Research Square
Laser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high peak current beams from relativistic laser plasmas formed in solid-density materials [1, 2]. This innovative concept attracts a lot of attention for various multidisciplinary applications as a compact alternative to conventional accelerators [3]. However, achieving energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here, we report on experimental generation of plasma-accelerated proton beams with a spectrally separated high-energy component of up to 150MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive Petawatt laser. Three-dimensional particle-in-cell simulations reveal that the observed beam parameters result from cascaded acceleration regimes that occur at the onset of relativistically induced transparency. The ultrashort pulse duration allows a rapid sequence of these regimes at highest intensity, enabling proton acceleration to unprecedented energy levels. Target transparency was identified to discriminate the high-performance domain of the acquired data set, making it a suitable feedback parameter for automated laser and target optimisation to enhance stability of plasma accelerators in the future. Ultimately, our results encourage further exploration and application of laser-driven plasmas as compact proton accelerators in the multi-100MeV range.
- 19 May 2023
- Published by Springer Nature in Research Square
Open AccessLaser-driven high-energy proton beams from cascaded acceleration regimes
Laser-driven ion accelerators can deliver high-energy, high peak current beams from relativistic laser plasmas formed in solid-density materials [1, 2]. This innovative concept attracts a lot of attention for various multidisciplinary applications as a compact alternative to conventional accelerators [3]. However, achieving energy levels suitable for applications such as radiation therapy remains a challenge for laser-driven ion accelerators. Here, we report on experimental generation of plasma-accelerated proton beams with a spectrally separated high-energy component of up to 150MeV by irradiating solid-density plastic foil targets with ultrashort laser pulses from a repetitive Petawatt laser. Three-dimensional particle-in-cell simulations reveal that the observed beam parameters result from cascaded acceleration regimes that occur at the onset of relativistically induced transparency. The ultrashort pulse duration allows a rapid sequence of these regimes at highest intensity, enabling proton acceleration to unprecedented energy levels. Target transparency was identified to discriminate the high-performance domain of the acquired data set, making it a suitable feedback parameter for automated laser and target optimisation to enhance stability of plasma accelerators in the future. Ultimately, our results encourage further exploration and application of laser-driven plasmas as compact proton accelerators in the multi-100MeV range.
- Open Access
- 1 March 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (3) , 033501
Imaging x-ray spectrometer at the high energy density instrument of the European x-ray free electron laser
A multipurpose imaging x-ray crystal spectrometer is developed for the high energy density instrument of the European X-ray Free Electron Laser. The spectrometer is designed to measure x rays in the energy range of 4–10 keV, providing high-resolution, spatially resolved spectral measurements. A toroidally bent germanium (Ge) crystal is used, allowing x-ray diffraction from the crystal to image along a one-dimensional spatial profile while spectrally resolving along the other. A detailed geometrical analysis is performed to determine the curvature of the crystal. The theoretical performance of the spectrometer in various configurations is calculated by ray-tracing simulations. The key properties of the spectrometer, including the spectral and spatial resolution, are demonstrated experimentally on different platforms. Experimental results prove that this Ge spectrometer is a powerful tool for spatially resolved measurements of x-ray emission, scattering, or absorption spectra in high energy density physics.
- 1 March 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (3) , 033501
Open AccessImaging x-ray spectrometer at the high energy density instrument of the European x-ray free electron laser
A multipurpose imaging x-ray crystal spectrometer is developed for the high energy density instrument of the European X-ray Free Electron Laser. The spectrometer is designed to measure x rays in the energy range of 4–10 keV, providing high-resolution, spatially resolved spectral measurements. A toroidally bent germanium (Ge) crystal is used, allowing x-ray diffraction from the crystal to image along a one-dimensional spatial profile while spectrally resolving along the other. A detailed geometrical analysis is performed to determine the curvature of the crystal. The theoretical performance of the spectrometer in various configurations is calculated by ray-tracing simulations. The key properties of the spectrometer, including the spectral and spatial resolution, are demonstrated experimentally on different platforms. Experimental results prove that this Ge spectrometer is a powerful tool for spatially resolved measurements of x-ray emission, scattering, or absorption spectra in high energy density physics.
- Open Access
- 30 January 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (1) , 014070
Transient Laser-Induced Breakdown of Dielectrics in Ultrarelativistic Laser-Solid Interactions
For high-intensity laser-solid interactions, the absolute density and surface density gradients of the target at the arrival of the ultrarelativistic laser peak are critical parameters. Accurate modeling of the leading edge-driven target preexpansion is desired to strengthen the predictive power of associated computer simulations. The transition from an initial solid state to a plasma state, i.e., the breakdown of the solid, defines the starting point of the subsequent target preexpansion. In this work, we report on the time-resolved observation of transient laser-induced breakdown (LIB) during the leading edge of high-intensity petawatt-class laser pulses with peak intensities of up to in interaction with dielectric cryogenic hydrogen jet targets. LIB occurs much earlier than what is typically expected following the concept of barrier suppression ionization. The observation is explained by comparing a characterization study of target-specific LIB thresholds with laser contrast measurements. The results demonstrate the relevance of the laser pulse duration dependence of LIB for high-intensity laser-solid interactions. We provide an effective approach to determine the onset of LIB and thereby the starting point of target preexpansion in other laser-target systems.- 30 January 2023
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 19 (1) , 014070
Open AccessTransient Laser-Induced Breakdown of Dielectrics in Ultrarelativistic Laser-Solid Interactions
For high-intensity laser-solid interactions, the absolute density and surface density gradients of the target at the arrival of the ultrarelativistic laser peak are critical parameters. Accurate modeling of the leading edge-driven target preexpansion is desired to strengthen the predictive power of associated computer simulations. The transition from an initial solid state to a plasma state, i.e., the breakdown of the solid, defines the starting point of the subsequent target preexpansion. In this work, we report on the time-resolved observation of transient laser-induced breakdown (LIB) during the leading edge of high-intensity petawatt-class laser pulses with peak intensities of up to in interaction with dielectric cryogenic hydrogen jet targets. LIB occurs much earlier than what is typically expected following the concept of barrier suppression ionization. The observation is explained by comparing a characterization study of target-specific LIB thresholds with laser contrast measurements. The results demonstrate the relevance of the laser pulse duration dependence of LIB for high-intensity laser-solid interactions. We provide an effective approach to determine the onset of LIB and thereby the starting point of target preexpansion in other laser-target systems. - Open Access
- 4 May 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-11
Off-harmonic optical probing of high intensity laser plasma expansion dynamics in solid density hydrogen jets
Due to the non-linear nature of relativistic laser induced plasma processes, the development of laser-plasma accelerators requires precise numerical modeling. Especially high intensity laser-solid interactions are sensitive to the temporal laser rising edge and the predictive capability of simulations suffers from incomplete information on the plasma state at the onset of the relativistic interaction. Experimental diagnostics utilizing ultra-fast optical backlighters can help to ease this challenge by providing temporally resolved inside into the plasma density evolution. We present the successful implementation of an off-harmonic optical probe laser setup to investigate the interaction of a high-intensity laser at $$5.4\times 10^{21}\,\hbox {W/cm}^{2}$$ peak intensity with a solid-density cylindrical cryogenic hydrogen jet target of $${5}\,{\upmu }\mathrm{m}$$ diameter as a target test bed. The temporal synchronization of pump and probe laser, spectral filtering and spectrally resolved data of the parasitic plasma self-emission are discussed. The probing technique mitigates detector saturation by self-emission and allowed to record a temporal scan of shadowgraphy data revealing details of the target ionization and expansion dynamics that were so far not accessible for the given laser intensity. Plasma expansion speeds of up to $$(2.3 \pm 0.4)\times 10^{7}\,\hbox {m/s}$$ followed by full target transparency at $${1.4}\,{\mathrm{ps}}$$ after the high intensity laser peak are observed. A three dimensional particle-in-cell simulation initiated with the diagnosed target pre-expansion at $${-0.2}\,{\mathrm{ps}}$$ and post processed by ray tracing simulations supports the experimental observations and demonstrates the capability of time resolved optical diagnostics to provide quantitative input and feedback to the numerical treatment within the time frame of the relativistic laser-plasma interaction.- 4 May 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-11
Open AccessOff-harmonic optical probing of high intensity laser plasma expansion dynamics in solid density hydrogen jets
Due to the non-linear nature of relativistic laser induced plasma processes, the development of laser-plasma accelerators requires precise numerical modeling. Especially high intensity laser-solid interactions are sensitive to the temporal laser rising edge and the predictive capability of simulations suffers from incomplete information on the plasma state at the onset of the relativistic interaction. Experimental diagnostics utilizing ultra-fast optical backlighters can help to ease this challenge by providing temporally resolved inside into the plasma density evolution. We present the successful implementation of an off-harmonic optical probe laser setup to investigate the interaction of a high-intensity laser at $$5.4\times 10^{21}\,\hbox {W/cm}^{2}$$ peak intensity with a solid-density cylindrical cryogenic hydrogen jet target of $${5}\,{\upmu }\mathrm{m}$$ diameter as a target test bed. The temporal synchronization of pump and probe laser, spectral filtering and spectrally resolved data of the parasitic plasma self-emission are discussed. The probing technique mitigates detector saturation by self-emission and allowed to record a temporal scan of shadowgraphy data revealing details of the target ionization and expansion dynamics that were so far not accessible for the given laser intensity. Plasma expansion speeds of up to $$(2.3 \pm 0.4)\times 10^{7}\,\hbox {m/s}$$ followed by full target transparency at $${1.4}\,{\mathrm{ps}}$$ after the high intensity laser peak are observed. A three dimensional particle-in-cell simulation initiated with the diagnosed target pre-expansion at $${-0.2}\,{\mathrm{ps}}$$ and post processed by ray tracing simulations supports the experimental observations and demonstrates the capability of time resolved optical diagnostics to provide quantitative input and feedback to the numerical treatment within the time frame of the relativistic laser-plasma interaction. - Top Cited PapersOpen Access
- 14 March 2022
- Published by Springer Nature in Nature Physics
- Vol. 18 (3) , 316-322
Tumour irradiation in mice with a laser-accelerated proton beam
Recent oncological studies identified beneficial properties of radiation applied at ultrahigh dose rates, several orders of magnitude higher than the clinical standard of the order of Gy min–1. Sources capable of providing these ultrahigh dose rates are under investigation. Here we show that a stable, compact laser-driven proton source with energies greater than 60 MeV enables radiobiological in vivo studies. We performed a pilot irradiation study on human tumours in a mouse model, showing the concerted preparation of mice and laser accelerator, dose-controlled, tumour-conform irradiation using a laser-driven as well as a clinical reference proton source, and the radiobiological evaluation of irradiated and unirradiated mice for radiation-induced tumour growth delay. The prescribed homogeneous dose of 4 Gy was precisely delivered at the laser-driven source. The results demonstrate a complete laser-driven proton research platform for diverse user-specific small animal models, able to deliver tunable single-shot doses up to around 20 Gy to millimetre-scale volumes on nanosecond timescales, equivalent to around 109 Gy s–1, spatially homogenized and tailored to the sample. The platform provides a unique infrastructure for translational research with protons at ultrahigh dose rates.
- 14 March 2022
- Published by Springer Nature in Nature Physics
- Vol. 18 (3) , 316-322
Top Cited PapersOpen AccessTumour irradiation in mice with a laser-accelerated proton beam
Recent oncological studies identified beneficial properties of radiation applied at ultrahigh dose rates, several orders of magnitude higher than the clinical standard of the order of Gy min–1. Sources capable of providing these ultrahigh dose rates are under investigation. Here we show that a stable, compact laser-driven proton source with energies greater than 60 MeV enables radiobiological in vivo studies. We performed a pilot irradiation study on human tumours in a mouse model, showing the concerted preparation of mice and laser accelerator, dose-controlled, tumour-conform irradiation using a laser-driven as well as a clinical reference proton source, and the radiobiological evaluation of irradiated and unirradiated mice for radiation-induced tumour growth delay. The prescribed homogeneous dose of 4 Gy was precisely delivered at the laser-driven source. The results demonstrate a complete laser-driven proton research platform for diverse user-specific small animal models, able to deliver tunable single-shot doses up to around 20 Gy to millimetre-scale volumes on nanosecond timescales, equivalent to around 109 Gy s–1, spatially homogenized and tailored to the sample. The platform provides a unique infrastructure for translational research with protons at ultrahigh dose rates.
- Open Access
- 20 December 2021
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 3 (4) , 043194
Probing ultrafast laser plasma processes inside solids with resonant small-angle x-ray scattering
Extreme states of matter exist throughout the universe, e.g., inside planetary cores, stars, or astrophysical jets. Such conditions can be generated in the laboratory in the interaction of powerful lasers with solids. Yet, the measurement of the subsequent plasma dynamics with regard to density, temperature, and ionization is a major experimental challenge. However, ultrashort x-ray pulses provided by x-ray free electron lasers (XFELs) allow for dedicated studies, which are highly relevant to study laboratory astrophysics, laser-fusion research, or laser-plasma-based particle acceleration. Here we report on experiments that employ a novel ultrafast method, which allows us to simultaneously access temperature, ionization state, and nanometer scale expansion dynamics in high-intensity, laser-driven, solid-density plasmas with a single x-ray detector. Using this method, we gain access to the expansion dynamics of a buried layer in compound samples, and we measure opacity changes arising from bound-bound resonance transitions in highly ionized copper. The presence of highly ionized copper leads to a temperature estimate of at least 2 million Kelvin already after the first 100 fs following the high-intensity laser irradiation. More specifically, we make use of asymmetries in small-angle x-ray scattering (SAXS) patterns, which arise from different spatial distributions of absorption and scattering cross sections in nanostructured grating samples when we tune an XFEL to atomic resonant energies of copper. Thereby, changes in asymmetry can be connected with the evolution of the plasma expansion and ionization dynamics. The potential of XFEL-based resonant SAXS to obtain three-dimensional ultrafast, nanoscopic information on density and opacity may offer a unique path for the characterization of dynamic processes in high energy density plasmas.
- 20 December 2021
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 3 (4) , 043194
Open AccessProbing ultrafast laser plasma processes inside solids with resonant small-angle x-ray scattering
Extreme states of matter exist throughout the universe, e.g., inside planetary cores, stars, or astrophysical jets. Such conditions can be generated in the laboratory in the interaction of powerful lasers with solids. Yet, the measurement of the subsequent plasma dynamics with regard to density, temperature, and ionization is a major experimental challenge. However, ultrashort x-ray pulses provided by x-ray free electron lasers (XFELs) allow for dedicated studies, which are highly relevant to study laboratory astrophysics, laser-fusion research, or laser-plasma-based particle acceleration. Here we report on experiments that employ a novel ultrafast method, which allows us to simultaneously access temperature, ionization state, and nanometer scale expansion dynamics in high-intensity, laser-driven, solid-density plasmas with a single x-ray detector. Using this method, we gain access to the expansion dynamics of a buried layer in compound samples, and we measure opacity changes arising from bound-bound resonance transitions in highly ionized copper. The presence of highly ionized copper leads to a temperature estimate of at least 2 million Kelvin already after the first 100 fs following the high-intensity laser irradiation. More specifically, we make use of asymmetries in small-angle x-ray scattering (SAXS) patterns, which arise from different spatial distributions of absorption and scattering cross sections in nanostructured grating samples when we tune an XFEL to atomic resonant energies of copper. Thereby, changes in asymmetry can be connected with the evolution of the plasma expansion and ionization dynamics. The potential of XFEL-based resonant SAXS to obtain three-dimensional ultrafast, nanoscopic information on density and opacity may offer a unique path for the characterization of dynamic processes in high energy density plasmas.
- Open Access
- 1 April 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-7
Proton beam quality enhancement by spectral phase control of a PW-class laser system
We report on experimental investigations of proton acceleration from solid foils irradiated with PW-class laser-pulses, where highest proton cut-off energies were achieved for temporal pulse parameters that varied significantly from those of an ideally Fourier transform limited (FTL) pulse. Controlled spectral phase modulation of the driver laser by means of an acousto-optic programmable dispersive filter enabled us to manipulate the temporal shape of the last picoseconds around the main pulse and to study the effect on proton acceleration from thin foil targets. The results show that applying positive third order dispersion values to short pulses is favourable for proton acceleration and can lead to maximum energies of 70 MeV in target normal direction at 18 J laser energy for thin plastic foils, significantly enhancing the maximum energy compared to ideally compressed FTL pulses. The paper further proves the robustness and applicability of this enhancement effect for the use of different target materials and thicknesses as well as laser energy and temporal intensity contrast settings. We demonstrate that application relevant proton beam quality was reliably achieved over many months of operation with appropriate control of spectral phase and temporal contrast conditions using a state-of-the-art high-repetition rate PW laser system.
- 1 April 2021
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-7
Open AccessProton beam quality enhancement by spectral phase control of a PW-class laser system
We report on experimental investigations of proton acceleration from solid foils irradiated with PW-class laser-pulses, where highest proton cut-off energies were achieved for temporal pulse parameters that varied significantly from those of an ideally Fourier transform limited (FTL) pulse. Controlled spectral phase modulation of the driver laser by means of an acousto-optic programmable dispersive filter enabled us to manipulate the temporal shape of the last picoseconds around the main pulse and to study the effect on proton acceleration from thin foil targets. The results show that applying positive third order dispersion values to short pulses is favourable for proton acceleration and can lead to maximum energies of 70 MeV in target normal direction at 18 J laser energy for thin plastic foils, significantly enhancing the maximum energy compared to ideally compressed FTL pulses. The paper further proves the robustness and applicability of this enhancement effect for the use of different target materials and thicknesses as well as laser energy and temporal intensity contrast settings. We demonstrate that application relevant proton beam quality was reliably achieved over many months of operation with appropriate control of spectral phase and temporal contrast conditions using a state-of-the-art high-repetition rate PW laser system.