Dina Salah

Phthalates are extensively used in water bottles and children’s toys. Therefore, detecting phthalates and their common derivatives in different samples is crucial. Gold nanoparticles had unique photophysical and photochemical properties due to their surface plasmon resonance. Here, we present a facile plasmonic sensor based on surface‐modified gold nanoparticles of different shapes, spherical and rods, and these gold nanoparticles are surface functionalized using PEG‐COOH and PEG‐NH ₂ ligands. Gold nanoparticles that detect di‐butyl phthalate (DPB) concentrations start from 3 × 10 ⁻¹² to 3 × 10 ⁻⁵ mol/L in aqueous samples. Adding DPB to functionalized gold nanorods causes an instant shift in the longitudinal surface resonance from 655 to 690 nm. They also show a detection concentration limit of up to 3 × 10 ⁻¹² mol/L. A higher sensitivity of gold nanorods was noticed compared to the spherical nanoparticles, and the results show absorbance (Δ Abs = 0.57 ± 0 and 0.54 ± 0.007) and good linearity with correlation coefficient values (0.994 and 0.991) using gold nanorods functionalized by PEG‐NH ₂ and PEG‐COOH, respectively, upon adding different concentrations of DBP in aqueous samples. The presented plasmonic sensor offers a rapid, sensitive, low‐cost, and simple detection method of DBP in laboratory aqueous samples.

Manuscript title: “Synthesis of Nickel Nanoparticles Using Ionic Liquid-Based Extract from Amaranthus viridis and Their Antibacterial Activity” Authors: Habib Ullah, Mohamed Hefnawy, Zaher Abdel Baki Please find the attached PDF file with comment...

This study tackles the critical demand for sustainable synthesis methods of reduced graphene oxide (rGO), highlighting the environmental drawbacks of conventional chemical processes. We introduce a novel, green synthesis technique involving the irradiation of a 500 eV argon ion beam, which not only facilitates the creation of micro-patterned rGO on a graphene oxide (GO) film but also enables simultaneous material characterization and patterning. By adjusting the irradiation exposure time between 0 and 80 s, we achieve meticulous control over the attributes and the reduction process of the material. The use of X-ray photoelectron spectroscopy (XPS) allows for real-time monitoring of the reduction from GO to rGO, evidenced by a notable reduction in the intensities of C-O, C=O, and O-C=O bonds, and an increase in C-C bond intensities, indicating a significant reduction level. Our research demonstrates the efficient production of eco-friendly rGO using precise, controlled argon ion beam irradiation, proving its advantages over traditional methods. These results contribute to the development of sustainable material science technologies, with potential applications in electronics, energy storage, and more.

Culex pipiens mosquitoes are transmitters of many viruses and are associated with the transmission of many diseases, such as filariasis and avian malaria, that have a high rate of mortality. The current study draws attention to the larvicidal efficacy of three methanolic algal extracts, Cystoseira myrica, C. trinodis, and C. tamariscifolia, against the third larval instar of Cx. pipiens. The UPLC-ESI-MS analysis of three methanol fractions of algal samples led to the tentative characterization of twelve compounds with different percentages among the three samples belonging to phenolics and terpenoids. Probit analysis was used to calculate the lethal concentrations (LC₅₀ and LC₉₀). The highest level of toxicity was attained after treatment with C. myrica extract using a lethal concentration 50 (LC₅₀) of 105.06 ppm, followed by C. trinodis (135.08 ppm), and the lowest level of toxicity was achieved by C. tamariscifolia (138.71 ppm) after 24 h. The elevation of glutathione-S-transferase (GST) and reduction of acetylcholine esterase (AChE) enzymes confirm the larvicidal activity of the three algal extracts. When compared to untreated larvae, all evaluated extracts revealed a significant reduction in protein, lipid, and carbohydrate contents, verifying their larvicidal effectiveness. To further support the observed activity, an in silico study for the identified compounds was carried out on the two tested enzymes. Results showed that the identified compounds and the tested enzymes had excellent binding affinities for each other. Overall, the current work suggests that the three algal extractions are a prospective source for the development of innovative, environmentally friendly larvicides.

The current work discusses the production and characterization of new biodegradable nanoparticles for biomedical applications based on insect chitosan. Chitosan has numerous features due to the presence of primary amine groups in repeating units, such as antibacterial and anticancer activities. When polyanion tripolyphosphate is added to chitosan, it creates nanoparticles with higher antibacterial activity than the original chitosan. In this study, the ionic gelation technique was used to make wasp chitosan nanoparticles (WCSNPs) in which TEM and FTIR were used to investigate the physicochemical properties of the nanoparticles. In addition, the antibacterial activities of chitosan nanoparticles against extended-spectrum beta-lactamase (ESBL)- and carbapenemase-producing Klebsiella pneumoniae, Escherichia coli, and Pseudomonas aeruginosa were evaluated. The extracted wasp chitosan exhibited high solubility in acetic acid and met all standard criteria of all characterization testes for nanoparticles; the zeta potential indicated stable WCSNPs capable of binding to cellular membrane and increasing the cellular uptake. The produced WCSNPs showed growth inhibition activity against all tested strains, and the bacterial count was lower than the initial count. The inhibition percent of WCSNPs showed that the lowest concentration of WCSNPs was found to be effective against tested strains. WCSNPs’ antibacterial activity implies that they could be used as novel, highly effective antibacterial agents in a variety of biological applications requiring antibacterial characteristics.

The use of gold nanorods (GNRs) as a contrast agent in bioimaging and cell tracking has numerous advantages, primarily due to the unique optical properties of gold nanorods which allow for the use of infrared regions when imaging. Owing to their unique geometry, Au NRs exhibit surface plasmon modes in the near-infrared wavelength range, which is ideal for carrying out optical measurements in biological fluids and tissue. Gold nanorod functionalization is essential, since the Cetyltrimethyl ammonium bromide CTAB gold nanorods are toxic, and for further in vitro and in vivo experiments the nanorods should be functionalized to become optically stable and biocompatible. In the present study, gold nanorods with an longitudinal surface plasmon resonance (LSPR) position around 800 nm were synthesized in order to be used for photoacoustic imaging applications for stem cell tracking. The gold nanorods were functionalized using both thiolated poly (ethylene glycol) (PEG) to stabilize the gold nanorods surface and a CALNN–TAT peptide sequence. Both ligands were attached to the gold nanorods through an Au–sulfur bond. CALNN–TAT is known as a cell penetrating peptide which ensures endocytosis of the gold nanorods inside the mesenchymal stem cells of mice (MSCD1). Surface modifications of gold nanorods were achieved using optical spectroscopy (UV–VIS), electron microscopy (TEM), zeta-potential, and FTIR. Gold nanorods were incubated in MSCD1 in order to achieve a cellular uptake that was characterized by a transmission electron microscope (TEM). For photoacoustic imaging, Multi-Spectral Optoacoustic Tomography (MSOT) was used. The results demonstrated good cellular uptake for PEG–CALNN–TAT GNRs and the successful use of modified gold nanorods as both a contrast agent in photoacoustic imaging and as a novel tracking bioimaging technique.

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.