Assunta Campanile

Geopolymers, alkali-activated aluminosilicate materials, have gained increasing attention as sustainable adsorbents for wastewater treatment due to their low-temperature synthesis, cost-effectiveness, and ease of shaping into mechanically robust structures. Their intrinsic negatively charged framework promotes the adsorption of cationic species; however, pristine geopolymers typically exhibit moderate performance, with adsorption capacities generally below ~70 mg g⁻¹ for dyes such as methylene blue (MB) and in the range of 20–100 mg g⁻¹ for divalent metal ions. To overcome these limitations, different strategies have been developed to tailor their pore structure and surface chemistry. In particular, foaming approaches enable the production of highly porous materials with tunable pore architecture, improving mass transfer and accessibility of active sites. Moreover, functionalization with carbon-based materials (e.g., activated carbon, graphene derivatives, biochar) or zeolitic phases significantly enhances adsorption performance, with reported capacities exceeding 500 mg g⁻¹ for Pb²⁺ and up to 450 mg g⁻¹ for organic dyes in optimized systems. This review provides a comprehensive overview of recent advances in geopolymer synthesis, pore engineering, and functionalization strategies, highlighting the relationships between composition, structure, and adsorption performance. Particular attention is devoted to the comparison between carbon-based and zeolitic modifications, as well as to the role of material shaping in enabling practical applications. Overall, the combination of tunable porosity, chemical versatility, and structural integrity positions functionalized geopolymers as promising candidates for the development of scalable and multifunctional adsorbents for wastewater remediation.

Lithium-containing zeolites are receiving significant attention due to their intriguing properties in various industrial applications, mainly related to gas separation and catalyzed processes. This paper presents an in-depth exploration of a nucleation strategy aimed at producing porous ceramic monoliths enriched with lithium zeolites. The synthesis was obtained by means of a geopolymer gel conversion, carried out by submerging either sodium- or lithium-rich geopolymers in lithium hydroxide solutions and performing a hydrothermal treatment. A full factorial design of experiments (DoE) was adopted to investigate the effect of LiOH molarity, treatment temperature, and time on the zeolite content in the samples. The most abundant and recurring zeolites obtained were Li-ABW (ABW) and lithium edingtonite (EDI). Concerning the lithium/sodium-containing systems, the competing presence of sodium directed the nucleation towards faujasite as well, together with minor amounts of other zeolites. In contrast, in pure lithium treatment media, the samples showed just ABW and EDI as the only crystalline phases.

Geopolymer technology is considered a strategic alternative for recycling construction and demolition waste (CDW) and to produce new construction products which meet the requirements of environmental and energy sustainability. The separation and management of CDW fractions is still a technological complex process and, even if large-scale separation technology is quite common, the necessity to perform this treatment may reduce the environmental and economic benefits of CDW reuse. So, a very promising option is represented by the manufacturing of geopolymers using unseparated CDW. In this aim, waste deriving from cement-based mortars, bricks and natural stones have been selected and widely characterized from a mineralogical, chemical and morphological point of view. Then, geopolymer mortars were produced using several amounts of either a single fraction or a mixture of the selected waste. The chemical, physical, mechanical, and microstructural characterization of the geopolymer-produced mortars was carried out to assess how the combination and different quantities of the mixed CDW affected the final properties. In particular, geopolymeric mortars produced from the unselected CDW showed higher mechanical properties, despite the lower apparent density, when compared to geopolymeric mortars produced from single fractions of CDW. The improvement of mechanical features seems to be not affected by the waste amount used, providing encouraging findings to promote the actual use of unseparated CDW with the resulting enhancement of environmental and economic benefits.

In the last century, the issue of “water reserves” has become a remarkably strategic topic in modern science and technology. In this context, water resource treatment and management systems are being developed in both agricultural and urban area scenarios. This can be achieved using superabsorbent polymers (SAPs), highly cross-linked hydrogels with three-dimensional, hydrophilic polymer structures capable of absorbing, swelling and retaining huge amounts of aqueous solutions. SAPs are able to respond to several external stimuli, such as temperature, pH, electric field, and solution composition and concentration. They can be used in many areas, from sensor technology to drug delivery, agriculture, firefighting applications, food, and the biomedical industry. In addition, new categories of functional SAP-based materials, mainly superabsorbent polymer composites, can also encapsulate fertilizers to efficiently provide the controlled release of both water and active compounds. Moreover, SAPs have great potential in wastewater treatment for the removal of harmful elements. In this respect, in the following review, the most promising and recent advances in the use of SAPs and composite SAPs as tools for the sustainable management and remediation of water resource are reviewed and discussed by identifying opportunities and drawbacks and highlighting new challenges and aims to inspire the research community.

The present paper assesses petrographic, mineralogical, chemical, and technological features of different zeolitic tuff samples from various western USA districts of the Basin and Range Province containing mainly erionite, mordenite, clinoptilolite/heulandite and phillipsite. The aim of this characterization is to evaluate the pozzolanic activity of these samples according to European normative UNI-EN 196/5 (Fratini test) to program a possible use as addition for blended cements. Petrographic and mineralogical results show that the two phillipsite-bearing tuffs have a higher theoretical Cation Exchange Capacity (CEC) than the other samples; technological characterization shows a pozzolanic behavior for all the samples but higher for the tuff samples containing phillipsite, which shows a higher reactivity with CaO. All the samples could be thus advantageously employed for the preparation of blended cements, potentially reducing CO₂ emissions by 70–90%.

Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.

Promoting the use of gypsum and gypsum-based materials in construction is a successful strategy from an environmental point of view; it allows a lower energy demand with a sensible reduction in carbon dioxide emissions. At the same time, the manufacturing of gypsum products can represent an interesting sector to redirect and manage the large amount of autoclaved aerated concrete (AAC) waste. In this paper a sustainable application of AAC granulate waste in gypsum-based building materials was proposed. The intrinsic compatibility derived their chemical composition and allowed it to partially substitute raw gypsum with the waste up to 30% without affecting the functional and structural properties of the final product. Physical characterization and sound absorption data confirmed that the addition of AAC waste does not significantly alter the typical porosity of the gypsum composite. Finally, all of the composites reached mechanical performances suitable for different building application as gypsum plaster.

An innovative and facile synthesis of cobalt based inorganic pigment was carried out by means of a low energy thermal conversion of a cobalt-exchanged zeolite. The Na-A [LTA] zeolite was used, since it is a low cost and easily available raw material. The ion exchange mechanism allowed to control, at microscopic level, the composition of the zeolitic precursor. Several chromatic effects could be obtained by varying the treatment temperature and/or the cobalt concentration in the contact solution. The reliability of these new zeolite-based pigments was tested in porcelain manufacture, in collaboration with the Institute for the Capodimonte porcelain “Giovanni Caselli”. The developed cobalt pigments were successfully tested either in the porcelain mixture to obtain a coloured product or in the decoration step (such as ingobbio, colored glazes and “third fire decoration”).