Marco Antonio Cruz-Gómez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marco Antonio Cruz-Gómez has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- José Alfredo Mejía-Pérez
Benemérita Universidad Autónoma de Puebla
16 shared publications - Juan Luis Castillo Pensado
Benemérita Universidad Autónoma de Puebla
5 shared publications - María del Rosario Espinosa-Carrasco
Benemérita Universidad Autónoma de Puebla
4 shared publications - Genaro Roberto López-Aguilar
Benemérita Universidad Autónoma de Puebla
3 shared publications - Alfredo Humberto Castillo-Aguirre
Universidad de Puebla
2 shared publications - Christian Cruz-Ramirez
Benemérita Universidad Autónoma de Puebla
2 shared publications
Latest Publications
- Open Access
- 30 December 2025
- Published by ECORFAN in Journal Mathematical and Quantitative Methods
Design and maintenance analysis of wind turbine amplifier gearboxes systems exposed to lightning discharges
The global demand for electrical energy from alternative sources has positioned wind power as the most feasible option. The aim of this research was to analyze the design and maintenance of wind turbine gearbox systems exposed to lightning strikes. On the other hand, state of-the-art gearboxes have an average replacement frequency of 0.4 times the lifespan of the wind turbine. However, those lacking these technologies will experience longer downtimes, impacting their efficiency and profitability. A mixed-mechanism analysis was performed to evaluate gearbox design and maintenance parameters, identifying critical factors such as intermittent torque and lightning strikes. An analysis of existing gearbox design methods prompted the proposal of an alternative method that meets the goals of sustainable development and modernization. The optimization of this technology will be the future work focus.
- 30 December 2025
- Published by ECORFAN in Journal Mathematical and Quantitative Methods
Open AccessDesign and maintenance analysis of wind turbine amplifier gearboxes systems exposed to lightning discharges
The global demand for electrical energy from alternative sources has positioned wind power as the most feasible option. The aim of this research was to analyze the design and maintenance of wind turbine gearbox systems exposed to lightning strikes. On the other hand, state of-the-art gearboxes have an average replacement frequency of 0.4 times the lifespan of the wind turbine. However, those lacking these technologies will experience longer downtimes, impacting their efficiency and profitability. A mixed-mechanism analysis was performed to evaluate gearbox design and maintenance parameters, identifying critical factors such as intermittent torque and lightning strikes. An analysis of existing gearbox design methods prompted the proposal of an alternative method that meets the goals of sustainable development and modernization. The optimization of this technology will be the future work focus.
- Open Access
- 30 December 2025
- Published by ECORFAN in Journal of Technological Prototypes
Smart and sustainable industrial circuit breakers; Improvement proposals for IEC 60947-2
Conventional circuit breakers have technical limitations that reduce their durability and adaptability. The aim of this research was to suggest modifications to the IEC 60947-2 standard and to consider technological advances in industrial circuit breakers, in order to promote sustainable and efficient alternatives. Furthermore, modern devices extend their useful life and reduce energy losses. However, their adoption is limited by incompatibility with traditional systems and the lack of updated regulations. A mixed analysis was conducted between the IEC 60947-2 standard and current technological advances, considering energy efficiency, compatibility, and integration in environments with limited infrastructure. Based on the data obtained, areas of opportunity were identified, and regulatory modifications were proposed, aimed at standardization, technical updating, and sustainability. The widespread implementation of these devices and the transformation of electrical systems will be the focus of future work in the electrical sector.
- 30 December 2025
- Published by ECORFAN in Journal of Technological Prototypes
Open AccessSmart and sustainable industrial circuit breakers; Improvement proposals for IEC 60947-2
Conventional circuit breakers have technical limitations that reduce their durability and adaptability. The aim of this research was to suggest modifications to the IEC 60947-2 standard and to consider technological advances in industrial circuit breakers, in order to promote sustainable and efficient alternatives. Furthermore, modern devices extend their useful life and reduce energy losses. However, their adoption is limited by incompatibility with traditional systems and the lack of updated regulations. A mixed analysis was conducted between the IEC 60947-2 standard and current technological advances, considering energy efficiency, compatibility, and integration in environments with limited infrastructure. Based on the data obtained, areas of opportunity were identified, and regulatory modifications were proposed, aimed at standardization, technical updating, and sustainability. The widespread implementation of these devices and the transformation of electrical systems will be the focus of future work in the electrical sector.
- Open Access
- 30 December 2025
- Published by ECORFAN in Revista de Operaciones Tecnologicas
Remote dry ice blaster cleaning as a maintenance technique turbine blades in wind farms
Wind energy, a zero-emission renewable energy source, has implemented increasingly larger turbine blades for greater production on land and offshore. The objective of this research was to propose a cryogenic method for remote cleaning and maintenance of wind turbine blades. On the other hand, wind turbine blades with excellent aerodynamics increase their performance up to 6% annually. However, those without this technology will experience greater downtime, impacting their efficiency and profitability. A mixed analysis was performed to evaluate cleaning and maintenance methods for wind farm blades, identifying advantages and disadvantages through quantitative and qualitative methods. An analysis of existing blade cleaning methods was the trigger to propose an alternative remote cleaning method that meets the objectives of sustainable development and the circular economy. The optimization of this technology will be the subject of future work.
- 30 December 2025
- Published by ECORFAN in Revista de Operaciones Tecnologicas
Open AccessRemote dry ice blaster cleaning as a maintenance technique turbine blades in wind farms
Wind energy, a zero-emission renewable energy source, has implemented increasingly larger turbine blades for greater production on land and offshore. The objective of this research was to propose a cryogenic method for remote cleaning and maintenance of wind turbine blades. On the other hand, wind turbine blades with excellent aerodynamics increase their performance up to 6% annually. However, those without this technology will experience greater downtime, impacting their efficiency and profitability. A mixed analysis was performed to evaluate cleaning and maintenance methods for wind farm blades, identifying advantages and disadvantages through quantitative and qualitative methods. An analysis of existing blade cleaning methods was the trigger to propose an alternative remote cleaning method that meets the objectives of sustainable development and the circular economy. The optimization of this technology will be the subject of future work.
- Open Access
- 30 December 2025
- Published by ECORFAN in Revista de la Invención Técnica
Autonomous prototype design with PLC for TEU Container Loading and Unloading Linked to AI Applications
Loading and unloading operations with autonomous container systems [TEUS] in port environments follow pre-established logistics. The aim of this research was to design an autonomous prototype for loading and unloading TEUs using a PLC, for sustainable development purposes. Customs systems that have autonomous loading and unloading systems comply with scheduled logistics in the supply chain. However, those that do not have their logistics compromised and present hidden defects. A mixed-method analysis was performed on TEU loading and unloading systems to apply, quantify, and estimate control variables such as length, leveling, tension, positioning, and speed. The characterization of technical data obtained from customs systems was transformed into autonomous models, optimizing logistics in sustainable development processes. The implementation and optimization of the system will be the focus of future work on customs systems.
- 30 December 2025
- Published by ECORFAN in Revista de la Invención Técnica
Open AccessAutonomous prototype design with PLC for TEU Container Loading and Unloading Linked to AI Applications
Loading and unloading operations with autonomous container systems [TEUS] in port environments follow pre-established logistics. The aim of this research was to design an autonomous prototype for loading and unloading TEUs using a PLC, for sustainable development purposes. Customs systems that have autonomous loading and unloading systems comply with scheduled logistics in the supply chain. However, those that do not have their logistics compromised and present hidden defects. A mixed-method analysis was performed on TEU loading and unloading systems to apply, quantify, and estimate control variables such as length, leveling, tension, positioning, and speed. The characterization of technical data obtained from customs systems was transformed into autonomous models, optimizing logistics in sustainable development processes. The implementation and optimization of the system will be the focus of future work on customs systems.
- Open Access
- 30 December 2025
- Published by ECORFAN in Journal of Scientific and Technical Applications
Analysis for the implementation of a grounding system in state-of-the-art wind farms
26.5% of installed electricity generation capacity worldwide is provided by renewable energy, of which 5.6% is supplied by wind power. The aim of this research was to analyze the implementation of grounding systems in wind farms aligned with the UN (United Nations) by 2050. Furthermore, wind farms protected with efficient grounding systems are more likely to reach their planned lifespan. However, those without these systems will account for 80% of insurance claims. A mixed-site analysis was conducted on wind farms and their grounding systems to quantify and estimate variables using traditional methods for decision-making in the modernization of lightning protection systems. An analysis of grounding methods under international wind turbine regulations led to the proposal of independent grounding systems for wind farms. The evaluation and optimization of this technology will be the subject of future work
- 30 December 2025
- Published by ECORFAN in Journal of Scientific and Technical Applications
Open AccessAnalysis for the implementation of a grounding system in state-of-the-art wind farms
26.5% of installed electricity generation capacity worldwide is provided by renewable energy, of which 5.6% is supplied by wind power. The aim of this research was to analyze the implementation of grounding systems in wind farms aligned with the UN (United Nations) by 2050. Furthermore, wind farms protected with efficient grounding systems are more likely to reach their planned lifespan. However, those without these systems will account for 80% of insurance claims. A mixed-site analysis was conducted on wind farms and their grounding systems to quantify and estimate variables using traditional methods for decision-making in the modernization of lightning protection systems. An analysis of grounding methods under international wind turbine regulations led to the proposal of independent grounding systems for wind farms. The evaluation and optimization of this technology will be the subject of future work
- Open Access
- 30 December 2025
- Published by ECORFAN in Revista del Diseño Innovativo
Sustainable design of a uniaxial seismic table for pedagogical study in universities
The study of structural resonance is crucial in seismic zones, but academic training is limited by expensive seismic simulation equipment. The aim of this research was to design a sustainable educational seismic table, optimizing its mechanical system through dynamic finite element analysis. On the other hand, institutions with access to this equipment strengthen practical training in earthquake-resistant engineering. However, those without it have limited teaching resources, as these are expensive imported products. A mixed analysis was performed in the design and optimization of the prototype for the quantification and estimation of control variables such as movement accuracy, frequency range, and dynamic behavior. The technical data characterization obtained from the structural analysis was transformed into mechanical models, optimizing the prototype design in sustainable development processes. The implementation and optimization of the system will be the subject of future work by engineering programs.
- 30 December 2025
- Published by ECORFAN in Revista del Diseño Innovativo
Open AccessSustainable design of a uniaxial seismic table for pedagogical study in universities
The study of structural resonance is crucial in seismic zones, but academic training is limited by expensive seismic simulation equipment. The aim of this research was to design a sustainable educational seismic table, optimizing its mechanical system through dynamic finite element analysis. On the other hand, institutions with access to this equipment strengthen practical training in earthquake-resistant engineering. However, those without it have limited teaching resources, as these are expensive imported products. A mixed analysis was performed in the design and optimization of the prototype for the quantification and estimation of control variables such as movement accuracy, frequency range, and dynamic behavior. The technical data characterization obtained from the structural analysis was transformed into mechanical models, optimizing the prototype design in sustainable development processes. The implementation and optimization of the system will be the subject of future work by engineering programs.
- Open Access
- 31 December 2024
- Published by ECORFAN in Revista de Energías Renovables
Ships decarbonization is an urgent technology and responsibility challenge that impacts global warming
Maritime transport generates 3% of global CO2 emissions according to the GHG (Greenhouse Gases) report. The aim of this research was to analyze the decarbonization of ships through the technological migration from conventional fuels to alternative types for zero-emission purposes. On the other hand, shipping companies that modernize their fleets to zero emissions will have priority in the provision of services. However, those that do not have these assets will be penalized. A mixed analysis was carried out on the migration of technologies in zero-emission ships based on the quantification and estimation of statistical control variables, decision-making, modernization stages and technologies. The characterization of data obtained from each ship will determine the feasibility of applicable technologies to achieve zero emissions. The optimization of technology applied to each ship according to its use will be the subject of future work.
- 31 December 2024
- Published by ECORFAN in Revista de Energías Renovables
Open AccessShips decarbonization is an urgent technology and responsibility challenge that impacts global warming
Maritime transport generates 3% of global CO2 emissions according to the GHG (Greenhouse Gases) report. The aim of this research was to analyze the decarbonization of ships through the technological migration from conventional fuels to alternative types for zero-emission purposes. On the other hand, shipping companies that modernize their fleets to zero emissions will have priority in the provision of services. However, those that do not have these assets will be penalized. A mixed analysis was carried out on the migration of technologies in zero-emission ships based on the quantification and estimation of statistical control variables, decision-making, modernization stages and technologies. The characterization of data obtained from each ship will determine the feasibility of applicable technologies to achieve zero emissions. The optimization of technology applied to each ship according to its use will be the subject of future work.
- Open Access
- 31 December 2024
- Published by ECORFAN in Journal of Scientific and Technical Applications
Engine cooling system analysis of a low displacement motorcycle using thermography
The cooling system of a motorcycle uses air and a coolant fluid as working fluids to reduce the temperatures generated by combustion. The aim of this research was to identify a mapping of motorcycle heating using thermography as a tool to optimize lifespan. On the other hand, motorcycles with efficient cooling systems increase their lifespan. However, motorcycles lacking this compromise their lifespan, requiring frequent repairs. A mixed analysis was employed for the optimization of the radiator, where quantification and estimation of control variables such as component temperatures, heat transfer, bodies, and surroundings were applied. The technical data characterization of the radiator and its thermographies were used to optimize its thermal performance. It is anticipated that the radiator characterization will be applicable to future work on motorcycles with similar characteristics to those used in this study.
- 31 December 2024
- Published by ECORFAN in Journal of Scientific and Technical Applications
Open AccessEngine cooling system analysis of a low displacement motorcycle using thermography
The cooling system of a motorcycle uses air and a coolant fluid as working fluids to reduce the temperatures generated by combustion. The aim of this research was to identify a mapping of motorcycle heating using thermography as a tool to optimize lifespan. On the other hand, motorcycles with efficient cooling systems increase their lifespan. However, motorcycles lacking this compromise their lifespan, requiring frequent repairs. A mixed analysis was employed for the optimization of the radiator, where quantification and estimation of control variables such as component temperatures, heat transfer, bodies, and surroundings were applied. The technical data characterization of the radiator and its thermographies were used to optimize its thermal performance. It is anticipated that the radiator characterization will be applicable to future work on motorcycles with similar characteristics to those used in this study.
- Open Access
- 31 December 2024
- Published by ECORFAN in Revista de Ingeniería Civil
Feasibility of dry canals in the Americas
The future of global maritime trade is being guided by the Triad generating uncontrollable infrastructure expansion. The objective of this research was to analyze the feasibility of dry canals in the American continent as sustainable development projects with fine relief from the Panama Canal. On the other hand, the success of a dry port depends on the preferences for use as a port route over its competitors. However, dry ports that are not competitive will be locally supplied. A mixed analysis was carried out to identify the feasibility criteria for dry canals, based on the quantification and estimation of statistical control variables, decision making, geopolitics and modernization. The characterization of data obtained from requirements so that a dry port can act as a detonator of sustainable and sustainable development in a cutting-edge environment. The identification of parameters of island-type port systems will be the subject of future work.
- 31 December 2024
- Published by ECORFAN in Revista de Ingeniería Civil
Open AccessFeasibility of dry canals in the Americas
The future of global maritime trade is being guided by the Triad generating uncontrollable infrastructure expansion. The objective of this research was to analyze the feasibility of dry canals in the American continent as sustainable development projects with fine relief from the Panama Canal. On the other hand, the success of a dry port depends on the preferences for use as a port route over its competitors. However, dry ports that are not competitive will be locally supplied. A mixed analysis was carried out to identify the feasibility criteria for dry canals, based on the quantification and estimation of statistical control variables, decision making, geopolitics and modernization. The characterization of data obtained from requirements so that a dry port can act as a detonator of sustainable and sustainable development in a cutting-edge environment. The identification of parameters of island-type port systems will be the subject of future work.
- Open Access
- 30 December 2024
- Published by ECORFAN in Revista Ciencias de la Salud
Sustainable design of dynamic elbow orthoses for adult rehabilitation treatment
The elbow joint is prone to degenerative diseases, injuries from work, sports, or accidents. Rehabilitation often requires surgery and mechanical rehabilitation by health professionals. This research aimed to design a dynamic elbow orthosis using the finite element method for sustainable adult rehabilitation. Elbow orthoses can reduce treatment time effectively, but their high cost and importation limit accessibility. The study involved a mixed analysis of orthosis design and optimization, considering variables like anthropometric measurements, mobility ranges, biomechanical parameters, and mechanical design. Technical data from human anatomy were used to create biomechanical models, optimizing the orthosis design for sustainable systems. Future work will focus on further rehabilitation optimization by health professionals.
- 30 December 2024
- Published by ECORFAN in Revista Ciencias de la Salud
Open AccessSustainable design of dynamic elbow orthoses for adult rehabilitation treatment
The elbow joint is prone to degenerative diseases, injuries from work, sports, or accidents. Rehabilitation often requires surgery and mechanical rehabilitation by health professionals. This research aimed to design a dynamic elbow orthosis using the finite element method for sustainable adult rehabilitation. Elbow orthoses can reduce treatment time effectively, but their high cost and importation limit accessibility. The study involved a mixed analysis of orthosis design and optimization, considering variables like anthropometric measurements, mobility ranges, biomechanical parameters, and mechanical design. Technical data from human anatomy were used to create biomechanical models, optimizing the orthosis design for sustainable systems. Future work will focus on further rehabilitation optimization by health professionals.