Walid Dachraoui
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Walid Dachraoui has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Rolf Erni
Electron Electron Microscopy Center, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
11 shared publications - Corsin Battaglia
Empa – Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
7 shared publications - Ruben-Simon Kühnel
Empa – Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
4 shared publications - Debora Keller
Electron Microscopy Center, Empa−Swiss Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf 8600, Switzerland
3 shared publications - Maksym V. Kovalenko
ETH Zurich
2 shared publications - Marta D. Rossell
Empa - Swiss Federal Laboratories for Materials Science and Technology
2 shared publications
Latest Publications
- Open Access
- 19 October 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (20) , 10293-10304
Local mechanical behavior and stress-driven evolution of lithium dendrites revealed by operando electrochemical liquid-cell TEM
Mechanical constraint transforms Li dendrite growth: operando liquid-cell TEM reveals how SEI disruption and localized Li deposition redirect root growth toward stress-assisted loop formation, folding, and multidimensional structural evolution.
- 19 October 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (20) , 10293-10304
Open AccessLocal mechanical behavior and stress-driven evolution of lithium dendrites revealed by operando electrochemical liquid-cell TEM
Mechanical constraint transforms Li dendrite growth: operando liquid-cell TEM reveals how SEI disruption and localized Li deposition redirect root growth toward stress-assisted loop formation, folding, and multidimensional structural evolution.
- 23 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (26) , 18764-18779
Capturing In Situ Atomic-Scale Insights into the Growth of CdS Quantum Dots in Aqueous Media
Despite extensive research in the past, the fundamental formation mechanisms of chalcogenide quantum dots (QDs) have remained poorly understood. To gain precise control over synthesis pathways and produce more complex QDs with targeted optoelectronic properties in the future, an in-depth understanding of the QD formation reactions is urgently required. In situ liquid-phase (scanning) transmission electron microscopy (LP-(S)TEM) offers a powerful possibility to directly visualize atomic-scale particle formation processes in realistic liquid environments. However, electron beam-induced radiolysis of water produces reactive species that strongly etch chalcogenides, making their investigations by LP-(S)TEM challenging. While recent studies have provided valuable insights into the etching processes of chalcogenide QDs, it remains a significant challenge to invert dissolution into formation processes. In this work, by beneficially tuning the chemical environment, we achieve in situ conditions that enable CdS QD formation in an aqueous environment under electron irradiation with direct observation. Our LP-STEM recordings visualize the atomic, multistep mechanisms of nucleation, growth, and nanocrystallization of CdS QDs. Our results reveal predominantly nonclassical growth pathways via coalescence that dominate over classical growth. Subsequent structural and analytical analyses further confirmed the formation of CdS QDs. Moreover, we provide a detailed discussion of how radiation-related factors and precursor solution chemistry affect CdS stability during LP-STEM experiments. Our findings hence offer detailed insights into the complex growth processes of CdS QDs and demonstrate how tailoring the liquid environment enhances the stability of sensitive chalcogenide materials in LP-STEM.
- 23 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (26) , 18764-18779
Capturing In Situ Atomic-Scale Insights into the Growth of CdS Quantum Dots in Aqueous Media
Despite extensive research in the past, the fundamental formation mechanisms of chalcogenide quantum dots (QDs) have remained poorly understood. To gain precise control over synthesis pathways and produce more complex QDs with targeted optoelectronic properties in the future, an in-depth understanding of the QD formation reactions is urgently required. In situ liquid-phase (scanning) transmission electron microscopy (LP-(S)TEM) offers a powerful possibility to directly visualize atomic-scale particle formation processes in realistic liquid environments. However, electron beam-induced radiolysis of water produces reactive species that strongly etch chalcogenides, making their investigations by LP-(S)TEM challenging. While recent studies have provided valuable insights into the etching processes of chalcogenide QDs, it remains a significant challenge to invert dissolution into formation processes. In this work, by beneficially tuning the chemical environment, we achieve in situ conditions that enable CdS QD formation in an aqueous environment under electron irradiation with direct observation. Our LP-STEM recordings visualize the atomic, multistep mechanisms of nucleation, growth, and nanocrystallization of CdS QDs. Our results reveal predominantly nonclassical growth pathways via coalescence that dominate over classical growth. Subsequent structural and analytical analyses further confirmed the formation of CdS QDs. Moreover, we provide a detailed discussion of how radiation-related factors and precursor solution chemistry affect CdS stability during LP-STEM experiments. Our findings hence offer detailed insights into the complex growth processes of CdS QDs and demonstrate how tailoring the liquid environment enhances the stability of sensitive chalcogenide materials in LP-STEM.
- Open Access
- 7 January 2026
- Published by Wiley in Advanced Science
- Vol. 13 (8) , e21842
In Situ Liquid‐Cell Transmission Electron Microscopy Insights Into Lithium‐Ion Battery Materials Degradation: Challenges and Emerging Solutions
Lithium‐ion batteries (LIBs) have revolutionized energy storage technologies, yet their performance, safety, and durability remain constrained by complex degradation processes that limit their ability to meet growing demands. Addressing these challenges requires a deep understanding of the underlying mechanisms. Liquid cell transmission electron microscopy (LC‐TEM), has emerged as a transformative platform for probing dynamic electrochemical processes, offering direct, multiscale insights from the crystal lattice to the full cell. Continuous advances in LC architectures, together with cutting‐edge TEM capabilities, have positioned LC‐TEM at the forefront of investigations of LIB degradation. Nevertheless, intrinsic challenges associated with liquid environments and individual cell architecture continue to limit the ability to resolve deeper details of degradation processes, creating a critical bottleneck. This review provides an overview of LIB performance challenges, recent TEM progress, and the evolution of LC‐TEM designs, emphasizing their strengths, limitations, and applications across key LIB materials. Emerging directions such as advanced microfabrication, correlative imaging, and machine learning integration are highlighted as promising pathways to expand the technique's reach and overcome current constraints. Finally, strategies are proposed to bridge in situ observations with macroscopic battery behavior. The review outlines that these emerging directions extend benefits beyond LIBs to other electrochemical and functional materials.
- 7 January 2026
- Published by Wiley in Advanced Science
- Vol. 13 (8) , e21842
Open AccessIn Situ Liquid‐Cell Transmission Electron Microscopy Insights Into Lithium‐Ion Battery Materials Degradation: Challenges and Emerging Solutions
Lithium‐ion batteries (LIBs) have revolutionized energy storage technologies, yet their performance, safety, and durability remain constrained by complex degradation processes that limit their ability to meet growing demands. Addressing these challenges requires a deep understanding of the underlying mechanisms. Liquid cell transmission electron microscopy (LC‐TEM), has emerged as a transformative platform for probing dynamic electrochemical processes, offering direct, multiscale insights from the crystal lattice to the full cell. Continuous advances in LC architectures, together with cutting‐edge TEM capabilities, have positioned LC‐TEM at the forefront of investigations of LIB degradation. Nevertheless, intrinsic challenges associated with liquid environments and individual cell architecture continue to limit the ability to resolve deeper details of degradation processes, creating a critical bottleneck. This review provides an overview of LIB performance challenges, recent TEM progress, and the evolution of LC‐TEM designs, emphasizing their strengths, limitations, and applications across key LIB materials. Emerging directions such as advanced microfabrication, correlative imaging, and machine learning integration are highlighted as promising pathways to expand the technique's reach and overcome current constraints. Finally, strategies are proposed to bridge in situ observations with macroscopic battery behavior. The review outlines that these emerging directions extend benefits beyond LIBs to other electrochemical and functional materials.
- Open Access
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (3) , 2135-2148
Active Phase–Support Interaction in Phosphotungstic Acid-SiO 2 Catalysts Enables Enhanced Olefin Oligomerization to Synthetic Fuel
- 2 January 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (3) , 2135-2148
Open AccessActive Phase–Support Interaction in Phosphotungstic Acid-SiO 2 Catalysts Enables Enhanced Olefin Oligomerization to Synthetic Fuel
- 16 December 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (51) , 42916-42927
In Situ Liquid-Phase Transmission Electron Microscopy Investigation of Anode–Electrolyte Interface Processes in Zn-Ion Batteries
Aqueous zinc batteries (AZBs) are promising candidates for future energy storage systems due to their low cost and inherent safety that comes along with the nonflammable aqueous electrolyte. However, their practical application is hindered by safety concerns arising from zinc (Zn) metal dendrite formation. Understanding the nucleation and growth mechanisms of Zn dendrites is essential to mitigate short-circuit risks and improve the stability of rechargeable ZIBs. In this study, we present an in situ electrochemical liquid cell scanning transmission electron microscopy (EC-LC-STEM) investigation of Zn dendrite evolution, revealing a multistep growth pathway. Initially, Zn species exhibiting a distinct hexagonal morphology with a preferred crystallographic orientation nucleate at localized sites at the interface between the electrode and the electrolyte, forming stacked hexagonal platelets. These platelets serve as seeds, guiding the directional growth of subsequent Zn deposition. As ion reduction progresses, these early structures act as anchors for anisotropic growth, ultimately giving rise to branched dendritic architectures. This sequential development, from oriented hexagonal nuclei to extended branching, underscores the critical role of early stage Zn species in dictating dendrite morphology. These findings contribute to a deeper understanding of the morphological evolution of Zn dendrites and offer valuable guidance for the design of strategies aimed at suppressing unsafe Zn growth in aqueous and hybrid ZIB systems.
- 16 December 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (51) , 42916-42927
In Situ Liquid-Phase Transmission Electron Microscopy Investigation of Anode–Electrolyte Interface Processes in Zn-Ion Batteries
Aqueous zinc batteries (AZBs) are promising candidates for future energy storage systems due to their low cost and inherent safety that comes along with the nonflammable aqueous electrolyte. However, their practical application is hindered by safety concerns arising from zinc (Zn) metal dendrite formation. Understanding the nucleation and growth mechanisms of Zn dendrites is essential to mitigate short-circuit risks and improve the stability of rechargeable ZIBs. In this study, we present an in situ electrochemical liquid cell scanning transmission electron microscopy (EC-LC-STEM) investigation of Zn dendrite evolution, revealing a multistep growth pathway. Initially, Zn species exhibiting a distinct hexagonal morphology with a preferred crystallographic orientation nucleate at localized sites at the interface between the electrode and the electrolyte, forming stacked hexagonal platelets. These platelets serve as seeds, guiding the directional growth of subsequent Zn deposition. As ion reduction progresses, these early structures act as anchors for anisotropic growth, ultimately giving rise to branched dendritic architectures. This sequential development, from oriented hexagonal nuclei to extended branching, underscores the critical role of early stage Zn species in dictating dendrite morphology. These findings contribute to a deeper understanding of the morphological evolution of Zn dendrites and offer valuable guidance for the design of strategies aimed at suppressing unsafe Zn growth in aqueous and hybrid ZIB systems.
- Open Access
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (44) , 52215-52230
High Permittivity and Supercapacitor Applications of Manganese Substitution in Biosynthesized-NPs Copper Spinel Ferrites
Researchers have paid particular attention to transition metal oxides in recent years due to their higher specific capacitance and conductivity, making them ideal candidates for improved electrode materials. The present study successfully synthesized the spinel ferrites CuFe2–y Mn y O4 (where y = 0.0 and 0.5) using the hydrothermal biosynthesis route at low sintered temperature. Several techniques are used to analyze the synthesized samples: XRD, XPS, S/TEM, and BET surface area analyzer. Complex impedance analysis was employed to examine the electrical and dielectric properties of the CuFe2–y Mn y O4. The substitution of Fe by Mn significantly improved the electrical conductivity by about one hundred factors over a wide range of temperatures. Additionally, the studied compound exhibits a high dielectric constant around εr′ ≈104, with an observed low dielectric loss. Via the obtained electrochemical results, it is found that the substituted sample (CuFe1.5Mn0.5O4) can be considered an effective material for the working electrode in an electrochemical supercapacitor. Thus, the CuFe1.5Mn0.5O4 nanoparticles demonstrate motivating electrochemical performance, such as a high specific capacitance of 396 F/g at 0.1 A/g, energy density of 49.5 Wh/kg, and strong cycling stability, retaining 78% capacity after 1000 cycles at 0.1 A/g.
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (44) , 52215-52230
Open AccessHigh Permittivity and Supercapacitor Applications of Manganese Substitution in Biosynthesized-NPs Copper Spinel Ferrites
Researchers have paid particular attention to transition metal oxides in recent years due to their higher specific capacitance and conductivity, making them ideal candidates for improved electrode materials. The present study successfully synthesized the spinel ferrites CuFe2–y Mn y O4 (where y = 0.0 and 0.5) using the hydrothermal biosynthesis route at low sintered temperature. Several techniques are used to analyze the synthesized samples: XRD, XPS, S/TEM, and BET surface area analyzer. Complex impedance analysis was employed to examine the electrical and dielectric properties of the CuFe2–y Mn y O4. The substitution of Fe by Mn significantly improved the electrical conductivity by about one hundred factors over a wide range of temperatures. Additionally, the studied compound exhibits a high dielectric constant around εr′ ≈104, with an observed low dielectric loss. Via the obtained electrochemical results, it is found that the substituted sample (CuFe1.5Mn0.5O4) can be considered an effective material for the working electrode in an electrochemical supercapacitor. Thus, the CuFe1.5Mn0.5O4 nanoparticles demonstrate motivating electrochemical performance, such as a high specific capacitance of 396 F/g at 0.1 A/g, energy density of 49.5 Wh/kg, and strong cycling stability, retaining 78% capacity after 1000 cycles at 0.1 A/g.
- Open Access
- 15 July 2025
- Published by Elsevier in Nano Energy
- Vol. 143
Anode-electrolyte interface in lithium-ion batteries investigated by liquid phase transmission electron microcopy: Achievements, challenges, and future directions
- 15 July 2025
- Published by Elsevier in Nano Energy
- Vol. 143
Open AccessAnode-electrolyte interface in lithium-ion batteries investigated by liquid phase transmission electron microcopy: Achievements, challenges, and future directions
- Open Access
- 6 June 2025
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 105 (23) , 1567-1605
Towards an improved, empirically derived model describing real nucleation and particle growth reactions at the atomic level
- 6 June 2025
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 105 (23) , 1567-1605
Open AccessTowards an improved, empirically derived model describing real nucleation and particle growth reactions at the atomic level
- Open Access
- 16 May 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (20) , 19213-19224
Enhanced Solid Electrolyte Interphase Layer in Li-Ion Batteries with Fluoroethylene Carbonate Additives Evidenced by Liquid-Phase Transmission Electron Microscopy
The solid electrolyte interphase (SEI) layer is essential for battery performance and safety due to its electron insulation and Li-ion conduction. However, issues such as ongoing electrolyte decomposition and Li dendrite growth often arise. The most common strategy for improving the SEI is using electrolyte additives. However, the growth mechanism of the SEI with additives remains unclear. In this study, we use operando electrochemical liquid cell scanning transmission electron microscopy (ec-LC-STEM) to monitor in real time the nanoscale processes at the electrode-electrolyte interface during battery operation. We investigate how the additive fluoroethylene carbonate (FEC) influences the formation and properties of the SEI, as well as the growth and dissolution of Li dendrites. Our study shows that FEC decomposes early, allowing the nucleation and growth of LiF nanoparticles (NPs) that create a dense, uniform, and thin SEI layer. Interestingly, our analysis reveals that these NPs have structural defects that could influence ionic and electronic conductivity. The real-time observations show that the FEC-based SEI facilitates the formation of dense and short Li metals, whereas the FEC-free SEI leads to the growth of long Li whiskers with thinner roots than tips. This structural difference influences their dissolution mechanism: in FEC-rich electrolytes, the strong contact between Li metal and the electrode ensures complete dissolution, while in FEC-free electrolytes, partial dissolution occurs, leaving behind inactive Li metal. These findings emphasize the crucial role of additives in shaping the growth mechanism and the local structure of the SEI, thereby regulating the growth and dissolution of Li metal.
- 16 May 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (20) , 19213-19224
Open AccessEnhanced Solid Electrolyte Interphase Layer in Li-Ion Batteries with Fluoroethylene Carbonate Additives Evidenced by Liquid-Phase Transmission Electron Microscopy
The solid electrolyte interphase (SEI) layer is essential for battery performance and safety due to its electron insulation and Li-ion conduction. However, issues such as ongoing electrolyte decomposition and Li dendrite growth often arise. The most common strategy for improving the SEI is using electrolyte additives. However, the growth mechanism of the SEI with additives remains unclear. In this study, we use operando electrochemical liquid cell scanning transmission electron microscopy (ec-LC-STEM) to monitor in real time the nanoscale processes at the electrode-electrolyte interface during battery operation. We investigate how the additive fluoroethylene carbonate (FEC) influences the formation and properties of the SEI, as well as the growth and dissolution of Li dendrites. Our study shows that FEC decomposes early, allowing the nucleation and growth of LiF nanoparticles (NPs) that create a dense, uniform, and thin SEI layer. Interestingly, our analysis reveals that these NPs have structural defects that could influence ionic and electronic conductivity. The real-time observations show that the FEC-based SEI facilitates the formation of dense and short Li metals, whereas the FEC-free SEI leads to the growth of long Li whiskers with thinner roots than tips. This structural difference influences their dissolution mechanism: in FEC-rich electrolytes, the strong contact between Li metal and the electrode ensures complete dissolution, while in FEC-free electrolytes, partial dissolution occurs, leaving behind inactive Li metal. These findings emphasize the crucial role of additives in shaping the growth mechanism and the local structure of the SEI, thereby regulating the growth and dissolution of Li metal.
- Open Access
- 13 October 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (20) , 20434-20444
Operando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries
The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting further electrolyte decomposition, extending the battery's cycle life. Insights into SEI growth and evolution in terms of structure and composition remain difficult to access. To unravel the formation of the SEI layer during the first cycles, operando electrochemical liquid cell scanning transmission electron microscopy (ec-LC-STEM) is employed to monitor in real time the nanoscale processes that occur at the anode-electrolyte interface in their native electrolyte environment. The results show that the formation of the SEI layer is not a one-step process but comprises multiple steps. The growth of the SEI is initiated at low potential during the first charge by decomposition of the electrolyte leading to the nucleation of inorganic nanoparticles. Thereafter, the growth continues during subsequent cycles by forming an island-like layer. Eventually, a dense layer is formed with a mosaic structure composed of larger inorganic patches embedded in a matrix of organic compounds. While the mosaic model for the structure of the SEI is generally accepted, our observations document in detail how the complex structure of the SEI is built up during discharge/charge cycling.
- 13 October 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (20) , 20434-20444
Open AccessOperando Electrochemical Liquid Cell Scanning Transmission Electron Microscopy Investigation of the Growth and Evolution of the Mosaic Solid Electrolyte Interphase for Lithium-Ion Batteries
The solid electrolyte interphase (SEI) is a key component of a lithium-ion battery forming during the first few dischage/charge cycles at the interface between the anode and the electrolyte. The SEI passivates the anode-electrolyte interface by inhibiting further electrolyte decomposition, extending the battery's cycle life. Insights into SEI growth and evolution in terms of structure and composition remain difficult to access. To unravel the formation of the SEI layer during the first cycles, operando electrochemical liquid cell scanning transmission electron microscopy (ec-LC-STEM) is employed to monitor in real time the nanoscale processes that occur at the anode-electrolyte interface in their native electrolyte environment. The results show that the formation of the SEI layer is not a one-step process but comprises multiple steps. The growth of the SEI is initiated at low potential during the first charge by decomposition of the electrolyte leading to the nucleation of inorganic nanoparticles. Thereafter, the growth continues during subsequent cycles by forming an island-like layer. Eventually, a dense layer is formed with a mosaic structure composed of larger inorganic patches embedded in a matrix of organic compounds. While the mosaic model for the structure of the SEI is generally accepted, our observations document in detail how the complex structure of the SEI is built up during discharge/charge cycling.