Chaoqi Shen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chaoqi Shen has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Lianbang Wang
State Key Laboratory of Green Chemical Synthesis and Conversion, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, China
9 shared publications Peng Yang
State Key Laboratory of Green Chemical Synthesis and Conversion, College of Chemical Engineering
6 shared publicationsWei Lin
College of Chemical Engineering Zhejiang University of Technology Hangzhou 310014 P. R. China
4 shared publications- Liwei Su
College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
3 shared publications Xinyu Hu
College of Chemical Engineering Zhejiang University of Technology Hangzhou 310014 P. R. China
3 shared publicationsChenxi Fu
State Key Laboratory of Green Chemical Synthesis and Conversion, College of Chemical Engineering
2 shared publications
Latest Publications
- 27 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (17) , 24535-24546
A Mn-Rich LiMn 0.7 Fe 0.3 PO 4 Nanoflower Cathode Solvothermally Synthesized with pH Control for Promoted Lithium-Ion Storage Performance
The escalating demand for lithium-ion batteries emphasizes the urgency of developing cobalt- and nickel-free cathodes ascribed to the high cost of these two metals. LiMnxFe1-xPO4 (LMFP) emerges as a promising candidate due to high operating voltage compared to LiFePO4 while suffering from inferior kinetics and cycling instability. This study demonstrates that precise pH control during the solvothermal process is pivotal for optimizing the LMFP/C microstructure and performance; furthermore, the mechanism of morphology evolution along with pH value and reaction duration is summarized. LiMn0.7Fe0.3PO4/C composites synthesized under varied pH conditions were thoroughly characterized and electrochemically evaluated. Results reveal that a moderately acidic environment (pH 4) facilitates the formation of a unique nanoflower architecture composed of (010)-oriented nanosheets with a highly graphitized carbon coating and minimal antisite defects after calcination. This optimal structure endows LiMn0.7Fe0.3PO4/C composite sample LMP/C-P4-24 with superior Li+ diffusion kinetics and charge-transfer efficiency, enabling a high discharge capacity (151.5 mAh g-1 at 1 C), outstanding cycling stability (96.1% retention after 500 cycles), and excellent rate capability (110.3 mAh g-1 at 10 C). In contrast, synthesis at higher pH induces structural disorder and inferior carbon quality with rapid performance degradation. This work establishes pH-mediated structural control as a powerful strategy for high-performance, resource-conscious, Mn-rich LiMn0.7Fe0.3PO4 cathode materials.
- 27 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (17) , 24535-24546
A Mn-Rich LiMn 0.7 Fe 0.3 PO 4 Nanoflower Cathode Solvothermally Synthesized with pH Control for Promoted Lithium-Ion Storage Performance
The escalating demand for lithium-ion batteries emphasizes the urgency of developing cobalt- and nickel-free cathodes ascribed to the high cost of these two metals. LiMnxFe1-xPO4 (LMFP) emerges as a promising candidate due to high operating voltage compared to LiFePO4 while suffering from inferior kinetics and cycling instability. This study demonstrates that precise pH control during the solvothermal process is pivotal for optimizing the LMFP/C microstructure and performance; furthermore, the mechanism of morphology evolution along with pH value and reaction duration is summarized. LiMn0.7Fe0.3PO4/C composites synthesized under varied pH conditions were thoroughly characterized and electrochemically evaluated. Results reveal that a moderately acidic environment (pH 4) facilitates the formation of a unique nanoflower architecture composed of (010)-oriented nanosheets with a highly graphitized carbon coating and minimal antisite defects after calcination. This optimal structure endows LiMn0.7Fe0.3PO4/C composite sample LMP/C-P4-24 with superior Li+ diffusion kinetics and charge-transfer efficiency, enabling a high discharge capacity (151.5 mAh g-1 at 1 C), outstanding cycling stability (96.1% retention after 500 cycles), and excellent rate capability (110.3 mAh g-1 at 10 C). In contrast, synthesis at higher pH induces structural disorder and inferior carbon quality with rapid performance degradation. This work establishes pH-mediated structural control as a powerful strategy for high-performance, resource-conscious, Mn-rich LiMn0.7Fe0.3PO4 cathode materials.
- 6 January 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (3)
Achieving Fast Mn Redox Kinetics with Solvothermal Synthesized (010) Facet Preferential LiMn0.5Fe0.5PO4 Nanoplates for Li‐Ion Batteries
A well‐designed solvothermal approach has been employed to synthesize olivine LiMn0.5Fe0.5PO4 (LMFP) cathode material with a nanoplate configuration. This method precisely controls crystal growth to achieve a high proportion of (010) facets while minimizing intrinsic defects. These modifications significantly enhance lithium‐ion diffusion kinetics and optimize the electrochemical performance of LMFP. The nanoscale of the (010) facets and the reduced anti‐site defect concentration in the MP‐PRO sample functionalize jointly to promote lithium‐ion transport during the long‐cycle. Furthermore, the superior electrochemical performance is closely linked with significantly reduced impedance and enhanced Mn redox kinetics. Both theoretical calculations and experimental results indicate that the confinement effect induced by 1,3‐propanediol directs facet orientation and confines nanoplate growth. Compared to the product synthesized using water (MP‐H2O), the 1,3‐propanediol‐based sample (MP‐PRO) delivers a high specific capacity of 130.7 mAh g−1 at 5C and demonstrates excellent cycling stability, with an 84.6% capacity retention after 1000 cycles. This study provides new insights into the kinetics of Mn redox in LMFP electrodes and reveals an effective electrode structure design to realize long‐life high rate batteries.
- 6 January 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (3)
Achieving Fast Mn Redox Kinetics with Solvothermal Synthesized (010) Facet Preferential LiMn0.5Fe0.5PO4 Nanoplates for Li‐Ion Batteries
A well‐designed solvothermal approach has been employed to synthesize olivine LiMn0.5Fe0.5PO4 (LMFP) cathode material with a nanoplate configuration. This method precisely controls crystal growth to achieve a high proportion of (010) facets while minimizing intrinsic defects. These modifications significantly enhance lithium‐ion diffusion kinetics and optimize the electrochemical performance of LMFP. The nanoscale of the (010) facets and the reduced anti‐site defect concentration in the MP‐PRO sample functionalize jointly to promote lithium‐ion transport during the long‐cycle. Furthermore, the superior electrochemical performance is closely linked with significantly reduced impedance and enhanced Mn redox kinetics. Both theoretical calculations and experimental results indicate that the confinement effect induced by 1,3‐propanediol directs facet orientation and confines nanoplate growth. Compared to the product synthesized using water (MP‐H2O), the 1,3‐propanediol‐based sample (MP‐PRO) delivers a high specific capacity of 130.7 mAh g−1 at 5C and demonstrates excellent cycling stability, with an 84.6% capacity retention after 1000 cycles. This study provides new insights into the kinetics of Mn redox in LMFP electrodes and reveals an effective electrode structure design to realize long‐life high rate batteries.
- 12 March 2024
- Published by Springer Nature in Ionics
- Vol. 30 (5) , 2503-2516
Interfacial cerium modification promotes the electrochemical properties of self-assembled Li1.2Mn0.54Ni0.13Co0.13O2 hollow microspheres
- 12 March 2024
- Published by Springer Nature in Ionics
- Vol. 30 (5) , 2503-2516
Interfacial cerium modification promotes the electrochemical properties of self-assembled Li1.2Mn0.54Ni0.13Co0.13O2 hollow microspheres
- 22 February 2024
- Published by Elsevier in Applied Surface Science
- Vol. 657
Ring-shaped all manganese-based lithium-rich oxide cathode with high performance and stability via biomineralization method
- 22 February 2024
- Published by Elsevier in Applied Surface Science
- Vol. 657
Ring-shaped all manganese-based lithium-rich oxide cathode with high performance and stability via biomineralization method
- 1 November 2023
- Published by Elsevier in Applied Surface Science
- Vol. 644
Regulating the 4d-band center of Mo atoms in β-Mo2C to promote lithium-oxygen reactions
- 1 November 2023
- Published by Elsevier in Applied Surface Science
- Vol. 644
Regulating the 4d-band center of Mo atoms in β-Mo2C to promote lithium-oxygen reactions
- 19 July 2022
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 924
Low-carbon CeOx/Ru@RuO2 nanosheets as bifunctional catalysts for lithium-oxygen batteries
- 19 July 2022
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 924
Low-carbon CeOx/Ru@RuO2 nanosheets as bifunctional catalysts for lithium-oxygen batteries
- Open Access
Electrochemically Inert Li2MnO3: The Key to Improving the Cycling Stability of Li-Rich Manganese Oxide Used in Lithium-Ion Batteries
Lithium-rich manganese oxide is a promising candidate for the next-generation cathode material of lithium-ion batteries because of its low cost and high specific capacity. Herein, a series of xLi2MnO3·(1 − x)LiMnO2 nanocomposites were designed via an ingenious one-step dynamic hydrothermal route. A high concentration of alkaline solution, intense hydrothermal conditions, and stirring were used to obtain nanoparticles with a large surface area and uniform dispersity. The experimental results demonstrate that 0.072Li2MnO3·0.928LiMnO2 nanoparticles exhibit a desirable electrochemical performance and deliver a high capacity of 196.4 mAh g−1 at 0.1 C. This capacity was maintained at 190.5 mAh g−1 with a retention rate of 97.0% by the 50th cycle, which demonstrates the excellent cycling stability. Furthermore, XRD characterization of the cycled electrode indicates that the Li2MnO3 phase of the composite is inert, even under a high potential (4.8 V), which is in contrast with most previous reports of lithium-rich materials. The inertness of Li2MnO3 is attributed to its high crystallinity and few structural defects, which make it difficult to activate. Hence, the final products demonstrate a favorable electrochemical performance with appropriate proportions of two phases in the composite, as high contents of inert Li2MnO3 lower the capacity, while a sufficient structural stability cannot be achieved with low contents. The findings indicate that controlling the composition through a dynamic hydrothermal route is an effective strategy for developing a Mn-based cathode material for lithium-ion batteries.
Open AccessElectrochemically Inert Li2MnO3: The Key to Improving the Cycling Stability of Li-Rich Manganese Oxide Used in Lithium-Ion Batteries
Lithium-rich manganese oxide is a promising candidate for the next-generation cathode material of lithium-ion batteries because of its low cost and high specific capacity. Herein, a series of xLi2MnO3·(1 − x)LiMnO2 nanocomposites were designed via an ingenious one-step dynamic hydrothermal route. A high concentration of alkaline solution, intense hydrothermal conditions, and stirring were used to obtain nanoparticles with a large surface area and uniform dispersity. The experimental results demonstrate that 0.072Li2MnO3·0.928LiMnO2 nanoparticles exhibit a desirable electrochemical performance and deliver a high capacity of 196.4 mAh g−1 at 0.1 C. This capacity was maintained at 190.5 mAh g−1 with a retention rate of 97.0% by the 50th cycle, which demonstrates the excellent cycling stability. Furthermore, XRD characterization of the cycled electrode indicates that the Li2MnO3 phase of the composite is inert, even under a high potential (4.8 V), which is in contrast with most previous reports of lithium-rich materials. The inertness of Li2MnO3 is attributed to its high crystallinity and few structural defects, which make it difficult to activate. Hence, the final products demonstrate a favorable electrochemical performance with appropriate proportions of two phases in the composite, as high contents of inert Li2MnO3 lower the capacity, while a sufficient structural stability cannot be achieved with low contents. The findings indicate that controlling the composition through a dynamic hydrothermal route is an effective strategy for developing a Mn-based cathode material for lithium-ion batteries.