Wuwei Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wuwei Chen has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Qidong Wang
School of Advanced Manufacturing Engineering and the Anhui Provincial Engineering Technology Research Center of Intelligent Vehicle Control and Integrated Design Technology, Hefei University, Hefei, China
4 shared publicationsLinfeng Zhao
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
3 shared publicationsBixin Cai
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
2 shared publicationsMingyue Yan
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
2 shared publications- Bixin Cai
School of Automotive and Traffic Engineering, Hefei University of Technology, Hefei 230009, China
1 shared publication Chunyang Wang
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, China
1 shared publication
Latest Publications
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 71 (4) , 11734-11745
Human-Machine Shared Framework of Intelligent Vehicles for Collision Avoidance Based on Hybrid System Theory
Most collision accidents are caused by drivers’ errors. To more effectively assist drivers in avoiding collisions, the human-machine shared driving system has become increasingly integrated into intelligent vehicles as consumer technologies and electronics. Furthermore, in collision avoidance scenarios, existing shared systems frequently exhibit excessive intervention when implementing corrective maneuvers for driver-induced errors, thereby inadvertently elevating the driver’s workload. To address these issues, this paper proposes a novel human-machine shared framework based on hybrid system theory. The shared framework contains a trajectory planning layer and a multi-state shared control layer. At the trajectory planning layer, the optimal collision-free trajectory is selected from the candidate trajectories based on natural driving data and collision constraints. The optimal trajectory is used as the reference trajectory for collision avoidance. At the shared control layer, a shared control strategy based on a hybrid automaton model performs multi-state shared control. The proposed humanmachine interaction criterion based on driver error governs the multi-state transitions. A model predictive controller is utilized to track the reference trajectory for collision avoidance. Simulation and experimental results show that the proposed method outperforms shared control methods based on steering angle deviation and control authority allocation. It reduces the drivers physical workload and automation intervention, enhancing cooperation satisfaction.
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 71 (4) , 11734-11745
Human-Machine Shared Framework of Intelligent Vehicles for Collision Avoidance Based on Hybrid System Theory
Most collision accidents are caused by drivers’ errors. To more effectively assist drivers in avoiding collisions, the human-machine shared driving system has become increasingly integrated into intelligent vehicles as consumer technologies and electronics. Furthermore, in collision avoidance scenarios, existing shared systems frequently exhibit excessive intervention when implementing corrective maneuvers for driver-induced errors, thereby inadvertently elevating the driver’s workload. To address these issues, this paper proposes a novel human-machine shared framework based on hybrid system theory. The shared framework contains a trajectory planning layer and a multi-state shared control layer. At the trajectory planning layer, the optimal collision-free trajectory is selected from the candidate trajectories based on natural driving data and collision constraints. The optimal trajectory is used as the reference trajectory for collision avoidance. At the shared control layer, a shared control strategy based on a hybrid automaton model performs multi-state shared control. The proposed humanmachine interaction criterion based on driver error governs the multi-state transitions. A model predictive controller is utilized to track the reference trajectory for collision avoidance. Simulation and experimental results show that the proposed method outperforms shared control methods based on steering angle deviation and control authority allocation. It reduces the drivers physical workload and automation intervention, enhancing cooperation satisfaction.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (12) , 18498-18511
Path Tracking Coordination Control With TD3 Reinforcement Learning Based on Danger Level Recognition Considering Generalized Functional Safety
In view of the generalized functional safety problems faced by intelligent vehicles, this paper focuses on vehicle driving safety and functional insufficiency of the steering system, and proposes a path tracking coordinated control method with TD3 reinforcement learning based on vehicle danger recognition. Based on the parameters of vehicle driving stability, the concept of vehicle danger level (DL) is established by integrating the parameters of path tracking accuracy. Affinity propagation (AP) clustering algorithm is used to cluster the vehicle driving status under different road adhesion coefficients, speeds and curvatures. The results of DL recognition are added to the design of TD3 reinforcement learning reward function, and the coordination control of automatic steering and differential braking under different conditions is realized, so as to achieve high-precision path tracking control under the premise of ensuring vehicle safety. The results of CarSim/Simulink co-simulation and hardware-in-loop test show that the vehicle DL can be more accurately recognized by using AP clustering algorithm and the reinforcement learning control strategy combined with DL recognition is superior to the traditional fixed parameter MPC controller and the reinforcement learning control strategy without considering the clustering method in improving the path tracking accuracy and lateral stability of the vehicle. The training convergence speed is improved in both the variable curvature road and the docking road, in which the functional insufficiency problem of the steering system is fully alleviated in the variable curvature road, and the energy loss caused by the additional yaw moment is less in the docking road.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (12) , 18498-18511
Path Tracking Coordination Control With TD3 Reinforcement Learning Based on Danger Level Recognition Considering Generalized Functional Safety
In view of the generalized functional safety problems faced by intelligent vehicles, this paper focuses on vehicle driving safety and functional insufficiency of the steering system, and proposes a path tracking coordinated control method with TD3 reinforcement learning based on vehicle danger recognition. Based on the parameters of vehicle driving stability, the concept of vehicle danger level (DL) is established by integrating the parameters of path tracking accuracy. Affinity propagation (AP) clustering algorithm is used to cluster the vehicle driving status under different road adhesion coefficients, speeds and curvatures. The results of DL recognition are added to the design of TD3 reinforcement learning reward function, and the coordination control of automatic steering and differential braking under different conditions is realized, so as to achieve high-precision path tracking control under the premise of ensuring vehicle safety. The results of CarSim/Simulink co-simulation and hardware-in-loop test show that the vehicle DL can be more accurately recognized by using AP clustering algorithm and the reinforcement learning control strategy combined with DL recognition is superior to the traditional fixed parameter MPC controller and the reinforcement learning control strategy without considering the clustering method in improving the path tracking accuracy and lateral stability of the vehicle. The training convergence speed is improved in both the variable curvature road and the docking road, in which the functional insufficiency problem of the steering system is fully alleviated in the variable curvature road, and the energy loss caused by the additional yaw moment is less in the docking road.
- 5 July 2023
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 46 (3) , 592-607
Coordinated control of longitudinal and lateral movements considering dynamics for distributed drive electric vehicle platoon on curved roads
The control goal of the vehicle platoon is to maintain the same speed and desired distance. Most current studies are based on simplified vehicle models, and the leader’s state is also rarely considered. However, under complex working conditions, such as low adhesion or curves, the lateral stability of the platoon will be difficult to guarantee, and tracking errors of desired speed and spacing may further increase. To solve the above problems, a new hierarchical coordinated control strategy is proposed. Taking distributed drive electric vehicles (DDEVs) as research objects, the upper control level establishes a stability situation assessment model according to the vehicle’s dynamic characteristics. At the medium control level, variable weight model predictive control (MPC) coordinates conflicts between longitudinal tracking and lateral stability. A correction term is also introduced to revise the prediction model. At the same time, the weight of different control objectives of the leader and following vehicle was adjusted, respectively. Torque distribution is carried out at the lower level controller. Finally, the control strategy is tested on a hardware-in-the-loop (HIL) platform. The results show that the proposed control strategy can ensure lateral stability while improving the tracking performance of the vehicle platoon.
- 5 July 2023
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 46 (3) , 592-607
Coordinated control of longitudinal and lateral movements considering dynamics for distributed drive electric vehicle platoon on curved roads
The control goal of the vehicle platoon is to maintain the same speed and desired distance. Most current studies are based on simplified vehicle models, and the leader’s state is also rarely considered. However, under complex working conditions, such as low adhesion or curves, the lateral stability of the platoon will be difficult to guarantee, and tracking errors of desired speed and spacing may further increase. To solve the above problems, a new hierarchical coordinated control strategy is proposed. Taking distributed drive electric vehicles (DDEVs) as research objects, the upper control level establishes a stability situation assessment model according to the vehicle’s dynamic characteristics. At the medium control level, variable weight model predictive control (MPC) coordinates conflicts between longitudinal tracking and lateral stability. A correction term is also introduced to revise the prediction model. At the same time, the weight of different control objectives of the leader and following vehicle was adjusted, respectively. Torque distribution is carried out at the lower level controller. Finally, the control strategy is tested on a hardware-in-the-loop (HIL) platform. The results show that the proposed control strategy can ensure lateral stability while improving the tracking performance of the vehicle platoon.
- 2 November 2022
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 61 (11) , 2912-2935
Fault-tolerant human-machine shared scheme for collision avoidance of intelligent vehicles considering driver error and actuator fault
This paper presents a fault-tolerant human-machine shared scheme for collision avoidance considering driver error and actuator fault. A fault-tolerant method of trajectory planning and decision-making is developed for dealing with the actuator fault. We calculate the remainder trajectory tracking capability of the faulted actuator and utilise the motion redundancy in the system to generate feasible fault-tolerant trajectories for collision avoidance. In addition, an assessment criterion of driver error is conducted to supervise the driver's steering response to the potential collision and actuator fault. The shared system dynamically adjusts the driving authority based on the driver error. A model predictive control (MPC) algorithm is employed for tracking the fault-tolerant trajectory. Simulation and hardware-in-the-loop (HIL) experiment results demonstrate the effectiveness of the presented approach, reducing traffic accidents due to driver error and actuator fault.
- 2 November 2022
- Published by Taylor & Francis in Vehicle System Dynamics
- Vol. 61 (11) , 2912-2935
Fault-tolerant human-machine shared scheme for collision avoidance of intelligent vehicles considering driver error and actuator fault
This paper presents a fault-tolerant human-machine shared scheme for collision avoidance considering driver error and actuator fault. A fault-tolerant method of trajectory planning and decision-making is developed for dealing with the actuator fault. We calculate the remainder trajectory tracking capability of the faulted actuator and utilise the motion redundancy in the system to generate feasible fault-tolerant trajectories for collision avoidance. In addition, an assessment criterion of driver error is conducted to supervise the driver's steering response to the potential collision and actuator fault. The shared system dynamically adjusts the driving authority based on the driver error. A model predictive control (MPC) algorithm is employed for tracking the fault-tolerant trajectory. Simulation and hardware-in-the-loop (HIL) experiment results demonstrate the effectiveness of the presented approach, reducing traffic accidents due to driver error and actuator fault.
- Open Access
Human–Machine Cooperative Control of Intelligent Vehicles for Lane Keeping—Considering Safety of the Intended Functionality
Reasonably foreseeable misuse by persons, as a primary aspect of safety of the intended functionality (SOTIF), has a significant effect on cooperation performance for lane keeping. This paper presents a novel human–machine cooperative control scheme with consideration of SOTIF issues caused by driver error. It is challenging to balance lane keeping performance and driving freedom when driver error occurs. A safety evaluation strategy is proposed for safety supervision, containing assessments of driver error and lane departure risk caused by driver error. A dynamic evaluation model of driver error is designed based on a typical driver model in the loop to deal with the uncertainty and variability of driver behavior. Additionally, an extension model is established for determining the cooperation domain. Then, an authority allocation strategy is proposed to generate a dynamic shared authority and achieve an adequate balance between lane keeping performance and driving freedom. Finally, a model predictive control (MPC)-based controller is designed for calculating optimal steering angle, and a steer-by-wheel (SBW) system is employed as an actuator. Numerical simulation tests are conducted on driver error scenarios based on the CarSim and MATLAB/Simulink software platforms. The simulation results demonstrate the effectiveness of the proposed method.
Open AccessHuman–Machine Cooperative Control of Intelligent Vehicles for Lane Keeping—Considering Safety of the Intended Functionality
Reasonably foreseeable misuse by persons, as a primary aspect of safety of the intended functionality (SOTIF), has a significant effect on cooperation performance for lane keeping. This paper presents a novel human–machine cooperative control scheme with consideration of SOTIF issues caused by driver error. It is challenging to balance lane keeping performance and driving freedom when driver error occurs. A safety evaluation strategy is proposed for safety supervision, containing assessments of driver error and lane departure risk caused by driver error. A dynamic evaluation model of driver error is designed based on a typical driver model in the loop to deal with the uncertainty and variability of driver behavior. Additionally, an extension model is established for determining the cooperation domain. Then, an authority allocation strategy is proposed to generate a dynamic shared authority and achieve an adequate balance between lane keeping performance and driving freedom. Finally, a model predictive control (MPC)-based controller is designed for calculating optimal steering angle, and a steer-by-wheel (SBW) system is employed as an actuator. Numerical simulation tests are conducted on driver error scenarios based on the CarSim and MATLAB/Simulink software platforms. The simulation results demonstrate the effectiveness of the proposed method.
- 6 April 2021
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 43 (12) , 2676-2688
Path tracking based on model predictive control with variable predictive horizon
Model predictive control is one of the main methods used in path tracking for autonomous vehicles. To improve the path tracking performance of the vehicle, a path tracking method based on model predictive control with variable predictive horizon is proposed in this paper. Based on the designed model predictive controller for path tracking, the response analysis of path tracking control system under the different predictive horizons is carried out to clarify the influence of predictive horizon on path tracking accuracy, driving comfort and real-time of the control algorithm. Then, taking the lateral offset, the steering frequency and the real-time of the control algorithm as comprehensive performance indexes, the particle swarm optimization algorithm is designed to realize the adaptive optimization for the predictive horizon. The effectiveness of the proposed method is evaluated via numerical simulation based on Simulink/CarSim and hardware-in-the-loop experiment on an autonomous driving simulator. The obtained results show that the optimized predictive horizon can adapt to the different driving environment, and the proposed path tracking method has good comprehensive performance in terms of path tracking accuracy of the vehicle, driving comfort and real-time.
- 6 April 2021
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 43 (12) , 2676-2688
Path tracking based on model predictive control with variable predictive horizon
Model predictive control is one of the main methods used in path tracking for autonomous vehicles. To improve the path tracking performance of the vehicle, a path tracking method based on model predictive control with variable predictive horizon is proposed in this paper. Based on the designed model predictive controller for path tracking, the response analysis of path tracking control system under the different predictive horizons is carried out to clarify the influence of predictive horizon on path tracking accuracy, driving comfort and real-time of the control algorithm. Then, taking the lateral offset, the steering frequency and the real-time of the control algorithm as comprehensive performance indexes, the particle swarm optimization algorithm is designed to realize the adaptive optimization for the predictive horizon. The effectiveness of the proposed method is evaluated via numerical simulation based on Simulink/CarSim and hardware-in-the-loop experiment on an autonomous driving simulator. The obtained results show that the optimized predictive horizon can adapt to the different driving environment, and the proposed path tracking method has good comprehensive performance in terms of path tracking accuracy of the vehicle, driving comfort and real-time.
- 1 January 2011
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 47 (06) , 121
Coordinated Control of Vehicle Ride Comfort and Handling Stability Based on State Identification
- 1 January 2011
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 47 (06) , 121
Coordinated Control of Vehicle Ride Comfort and Handling Stability Based on State Identification
- 1 August 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 25 (21527431) , 1150-1155
Integrated vehicle dynamics control through coordinating electronic stability program and active suspension system
This paper investigates integrated vehicle dynamics control through coordinating active suspension system (ASS) and electronic stability program (ESP) in order to improve the overall vehicle performance including handling, stability, and comfort. A two-layer hierarchical control architecture is proposed to integrated control of the two chassis control systems. The upper layer controller is designed to coordinate the interactions between the ASS and the ESP. While in the lower layer, the two controllers including the ASS and the ESP, are developed independently to achieve their local control objectives. Simulation investigation is performed to demonstrate the effectiveness of the proposed hierarchical control system. Results show that the proposed hierarchical control system is able to improve the multiple performance indices of the vehicle including both the ride comfort and the lateral stability, compared to the non-integrated control system.
- 1 August 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 25 (21527431) , 1150-1155
Integrated vehicle dynamics control through coordinating electronic stability program and active suspension system
This paper investigates integrated vehicle dynamics control through coordinating active suspension system (ASS) and electronic stability program (ESP) in order to improve the overall vehicle performance including handling, stability, and comfort. A two-layer hierarchical control architecture is proposed to integrated control of the two chassis control systems. The upper layer controller is designed to coordinate the interactions between the ASS and the ESP. While in the lower layer, the two controllers including the ASS and the ESP, are developed independently to achieve their local control objectives. Simulation investigation is performed to demonstrate the effectiveness of the proposed hierarchical control system. Results show that the proposed hierarchical control system is able to improve the multiple performance indices of the vehicle including both the ride comfort and the lateral stability, compared to the non-integrated control system.
- 1 January 2009
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 45 (08) , 190
Simulation Research on Layered Coordinated Control of Automotive ESP and ASS
- 1 January 2009
- Published by Chinese Journal of Mechanical Engineering in Journal of Mechanical Engineering
- Vol. 45 (08) , 190
Simulation Research on Layered Coordinated Control of Automotive ESP and ASS