EUEvgeniya Uglova

Evgeniya Uglova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Evgeniya Uglova has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Assessment of the structural condition of road pavements based on energy dissipation analysis of Falling Weight Deflectometer (FWD) measurements

    by Artem Tiraturyan, Evgeniya Uglova

    1. Non-destructive testing (NDT) of highway pavements is one of the most science-intensive and technologically advanced areas of road infrastructure management. Its importance cannot be overstated,...

  • Open Access

    Study on Dynamic Response Characteristics of Different Asphalt Pavement Structures Based on ALF Test

    by Ni Guangcong, A. N. Tiraturyan, E. V. Uglova, А. В. Воробьев, Ни Гуанцунг

    Introduction. In recent years, one of the main trends in the field of testing road structures has become field study of their large-scale models at the accelerated load facility (ALF). It can significantly reduce the cost of selecting the most economical and durable pavement designs. However, the results obtained on the ALF are often relative, since they practically do not correlate with the results of laboratory and field tests on real objects. This study is aimed at a comprehensive investigation of the response of a road structure to a dynamic load, the establishment of patterns of fatigue failure of asphalt concrete layers during the accelerated testing and full-scale tests on real objects.Materials and Methods. During testing, an accelerated load facility was used, located on the territory of the ShanDong Transport University. When conducting field tests, a dynamic loading unit with a falling weight FWD Primax 1500 was used, which recorded the deflection bowl on the surface of the structure under study. To record the dynamic response in the arrangement of the road structure, a complex of strain gauge sensors was used, which made it possible to register both compressive stresses and tensile strains in different layers. The results obtained under natural conditions were compared to the results obtained on the mathematical FEM model.Results. The research results have shown that the thickness of the lower coating layer is the main factor affecting the amount of vertical deformation of the pavement, which must be taken into account at the design stage of the pavement structure. Thus, with a thickness of the upper layer of the base of 10 cm, the vertical deformation was 100 µm, and with a thickness of 20 cm – 55 µm, provided that the overall strength of the structure was ensured. The number of load application cycles on the ALF had a minimal effect on the selected asphalt concrete samples during split tensile tests.Discussion and Conclusion. The adequacy of the results obtained in the course of accelerated testing of road structures was shown through a comprehensive comparison of numerical simulation data and full-scale tests, and the adequacy of the applied calculation methods was validated. The results of the study can be further applied in the road industry to develop and improve the regulatory framework for the design of non-rigid pavement under conditions of increased loads and heavy traffic.


  • Open Access

    Evaluation of Pavement Condition Deterioration Using Artificial Intelligence Models

    by M. M. M. Elshamy, A. N. Tiraturyan, E. V. Uglova, M. Z. Elgendy

    Introduction. One of the most significant tasks facing road experts is to maintain the transport network in good condition. The process of selecting an appropriate approach to providing such condition is quite complex since it requires considering many parameters, such as the existing condition of the pavement, road category, weather conditions, traffic volume, etc. Recently, the rising trend of digitization in the industry has contributed to the use of artificial intelligence to address problems in several fields, including the bodies in charge of operational control over the status of roadways. Within the context of any control system, the main task of the control system is to carry out reliable forecasting of the operational state of the road in the medium and long term.Materials and Methods. This study investigated the possibility of using artificial neural networks to assess existing pavement characteristics and their potential application in developing road maintenance strategies. A back-propagation neural network was implemented, trained using data from 1,614 investigated sections of the M4 «DON» highway in the road network of the Russian Federation in the period from 2014 to 2018. Several models were developed and trained using the MATLAB application, each with a different number of neurons in the hidden layers.Results. The results of the models showed a convergence between the inferred paving state values and the actual values, as the multiple correlation coefficient (R2) values exceeded 92 % for most of the models during all learning stages.Discussion and Conclusions. The findings suggest that public road authorities may utilize the established models to choose the best road maintenance strategy and assign the most efficient steps to restore road bearing capacity and operation.


  • Open Access

    Evaluation of the elastic modulus of pavement layers using different types of neural networks models

    by M. M.M. Elshamy, A. N. Tiraturyan, E. V. Uglova

    Introduction. This paper studies the capability of different types of artificial neural networks (ANN) to predict the modulus of elasticity of pavement layers for flexible asphalt pavement under operating conditions. The falling weight deflectometer (FWD) was selected to simulate the dynamic traffic loads and measure the flexural bowls on the road surface to obtain the database of ANN models.Materials and Methods. Artificial networks types (the feedforward backpropagation, layer-recurrent, cascade back- propagation, and Elman backpropagation) are developed to define the optimal ANN model using Matlab software. To appreciate the efficiency of every model, we used the constructed ANN models for predicting the elastic modulus values for 25 new pavement sections that were not used in the process of training, validation, or testing to ensure its suitability. The efficiency measures such as mean absolute error (MAE), the coefficient of multiple determinations R2, Root Mean Square Error (RMSE), Mean Absolute Percent Error (MAPE) values were obtained for all models results.Results. Based on the performance parameters, it was concluded that among these algorithms, the feed-forward model has a better performance compared to the other three ANN types. The results of the best four models were compared to each other and to the actual data obtained to determine the best method.Discussion and Conclusions. The differences between the results of the four best models for the four types of algorithms used were very small, as they showed the closeness between them and the actual values. The research results confirm the possibility of ANN-based models to evaluate the elastic modulus of pavement layers speedily and reliably for using it in the structural assessment of (NDT) flexible pavement data at the appropriate time.


  • Open Access

    Road characteristic study of a high modulus road concrete mix with various additives

    by Ni Guangcong, Evgeniya Uglova

    To develop recommendations for the high-modulus additives use in road concrete mix for pavement, in this work were considered two high-modulus additives: PR Module and PR PLASTS. A comparative analysis of the viscoelastic properties, characteristics at high and low temperatures, and the water-resistance of a high-modulus road concrete mix and a regular road concrete mix AS-20 was performed. In the scope of the study were performed tests to determine the dynamic elasticity modulus, wheel track rutting, three-point bending, and freeze-thawing stability. The various additives’ influence on the high-modulus road concrete mix road characteristics were analyzed in detail. The results show that high modulus additives can significantly improve the road concrete mix’s high-temperature stability without compromising the resistance to low-temperature cracking. The asphalt concrete’s high viscosity with the high modulus additives introduction can, to a certain extent, improve the water-resistance and fatigue characteristics of the mixture, while the effect of the PR PLASTS additive is more significant.