WXWei Xia

Wei Xia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wei Xia has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on Microwave Deicing of Carbon-Fiber-Modified Concrete under Multi-Factor Coupling Effect

    by He Huang, Jinyu Xu, Ao Yao, Wei Xia, Erlei Bai, Yipeng Ning

    To explore the law of microwave deicing of carbon-fiber-modified concrete under the action of multiple factors and improve its application in pavement, in this study, we designed a test of the heat absorption and deicing effect of concrete under the action of multiple factors. We found that the law of heat absorption and deicing of CFRP is influenced by the coupling effect of fiber length and dosage, height (straight-line distance between the microwave receiving surface and bell component), initial temperature and ice cover. The temperature rises fastest when the fiber dosage is 0.2% and fiber length is 6 mm without ice. Further analysis of other factors shows that the deicing effect is optimal when the height is 40 mm, and the presence of ice on fiber-reinforced concrete weakens the microwave deicing efficiency, although the reduction is small. The test results of these two factors are in agreement with the simulation results and conform to expectations. The initial temperature has a considerable influence on the deicing efficiency. In practical applications, the deicing time should be adjusted according to the initial temperature in order to prevent the phenomenon of secondary icing when the heating time is too long. Based on heat generation and heat dissipation, the four stages of microwave deicing were analyzed, and the relationship with the temperature increase rate was deduced. It was proven that carbon fiber affected the deicing efficiency by changing the microwave absorption and reflection effect of concrete.


  • Open Access

    Study on Impact Compression Performance and Constitutive Model of Aluminum Oxide Fiber-Reinforced Concrete

    by Ao Yao, Jinyu Xu, Wei Xia, He Huang, Yipeng Ning

    In order to explore the impact compression performance of aluminum oxide fiber concrete, the impact compression test of aluminum oxide fiber concrete with different contents is carried out by using the split Hopkinson pressure bar (SHPB) comprehensive test system with a diameter of 100 mm. Our intent was to explore the influence law of different contents of aluminum oxide fiber on the impact compression performance of concrete matrixes, and to optimize and establish a constitutive model based on damage theory and stress residue. The results show that adding alumina short-cut fiber to concrete changes its mechanical properties of impact compression to a certain extent. When the volume content of fiber is 0.2%, the characteristics of strength, deformation, and energy are the best, and the excess aluminum oxide fiber reduces the original performance due to agglomeration and other factors; the strength characteristics, peak deformation characteristics, and energy characteristics of aluminum oxide fiber concrete are significantly affected by strain rate and impact velocity. Based on the Zhu-Wang-Tang non-linear viscoelastic model (ZWT model), the complexity coefficient is optimized and the residual stress term is added to construct the prediction model of aluminum oxide fiber concrete. The parameters in the model have a good prediction effect on the stress-strain curve under different strain rates.


  • Open Access

    An Experimental Study on Mechanical Properties for the Static and Dynamic Compression of Concrete Eroded by Sulfate Solution

    by Ao Yao, Jinyu Xu, Wei Xia

    The mechanical properties of the static and dynamic compression of concrete eroded by a 15% sodium sulfate solution were explored with a 70-mm-diameter true triaxial static-dynamic comprehensive loading test system, and an analysis of the weakening mechanisms for the degree of macroscopic damage and microscopic surface changes of eroded concrete were conducted in combination with damage testing based on relevant acoustic characteristics and SEM scanning. The experience obtained in this paper is used to analyze and solve the problem that the bearing capacity of concrete buildings is weakened due to the decrease in durability under the special conditions of sulfate erosion. The results showed that, in a short time, the properties of concrete corroded by sulfate solution were improved to a certain extent due to continuous hydration. When the corrosion time was prolonged, the internal concrete structure was destroyed after it was eroded by sulfate, and its dynamic and static strength, deformability, and energy absorption were reduced to differing degrees, thus greatly inhibiting the overall mechanical performance of concrete; the dynamic compressive strength changed with strain that exhibited a significant strain rate effect; and, under the influence of sulfate erosion and hydration, the longitudinal wave velocity increased first and then decreased. The longitudinal wave velocity was slower than that of concrete under normal environment and distilled water immersion condition. SEM and acoustic wave analysis indicated that the internal concrete structure was destroyed after it was eroded by sulfate, and its dynamic and static strength, deformability, and energy absorption were reduced to differing degrees, thus greatly inhibiting the overall mechanical performance of concrete.


  • Open Access

    Preparation Process and Early Working Performance of Inorganic Polymer-based Fast-hardening Concrete

    by Xia Wei, Xu Jinyu, Liu Gaojie, Yuan Yingjie

    For the purpose of delving deep into the preparation process and early working performance of inorganic cementitious composite material, and analyzing its application prospect in pavement emergency repair, the slag, fly ash and silica fume are used as solid cementitious materials, and sodium hydroxide and sodium silicate are used as alkali-activators to prepare inorganic polymer-based fast-hardening concrete (IPFC). The early working performance of the specimens with different contents of slag, fly ash and silica fume were compared and analyzed. The results show that, all the kinds of concrete mixtures have good fluidity, cohesiveness and water retentiveness. The addition of fly ash and silica fume can prolong the initial setting time of concrete, and the higher the content, the longer the extension time. And the slump of the mixture is inhibited by the addition of fly ash. When the content of fly ash is 15%, the slump of the mixture decreases by 19.2%. However, silica fume can improve the slump of the mixture. When the content of silica fume is 15%, the slump of the mixture increases by 19.1%.


  • Open Access

    Research on the Mechanical Performance of Carbon Nanofiber Reinforced Concrete under Impact Load Based on Fractal Theory

    by Wei Xia, Jinyu Xu, Liangxue Nie

    The research is focused on the dynamic compressive strength, impact toughness and the distribution law of fragmentation size for the plain concrete and the carbon nanofiber reinforced concrete with four fiber volume contents (0.1%, 0.2%, 0.3% and 0.5%) under impact load by using the Φ100 mm split-Hopkinson pressure bar. Based on the fractal theory and considering the micropore structure characteristics of the specimen, the impact of the strain rate and the dosage of carbon nanofibers on the dynamic mechanical performance of concrete is analyzed. According to the results, both the dynamic compressive strength and the impact toughness increase continuously with the improvement of the strain rate level at the same dosage of fiber, showing strong strain rate strengthening effect; at the same strain rate level, the impact toughness increases gradually with the increase in the fiber dosage, while the dynamic compressive strength tends to increase at first and then decrease; the distribution of the fragmentation size of concrete is a fractal in statistical sense, in general, the higher the strain rate level, the higher the number of fragments, the lower the size, and the larger the fractal dimension; the optimal dosage of carbon nanofibers to improve the dynamic compressive strength of concrete is 0.3%, and the pore structure characteristics of carbon nanofiber reinforced concrete exhibit obvious fractal features.


  • Open Access

    Study on the Effects of Powder‐Liquid Ratio and Cement Ratio on Mechanical Properties and Microscopic Characteristics of Polymer‐Cement Composite

    by Zhe Huang, Jinyu Xu, Binglin Leng, Weibo Ren, Sen Chang, Zhihang Wang, Wei Xia

    This paper is about a study on the mechanical properties of a new polymer‐cement composite (PCC) in constant elongation, tension, and shear. The study explored the effects of powder‐liquid ratio and cement ratio on the mechanical properties of PCC through detecting the strength, deformation, and energy consumption of specimens under different powder‐liquid ratios and cement ratios. In addition, scanning electron microscope and mercury injection apparatus were used for an in‐depth analysis on the micromorphology and pore structure features of PCC under different powder‐liquid ratios and cement ratios to explore the influence of powder‐liquid ratio and cement ratio of the micromechanical properties of PCC. The results showed that, with the increase of powder‐liquid ratio and cement ratio, the constant elongation adhesion strength of PCC decreased, and, at a high powder‐liquid ratio (0.55) or a high cement ratio (0.5), the constant elongation adhesion strength of PCC completely disappeared. Meanwhile, with the increase of powder‐liquid ratio and cement ratio, the tensile shear strength of PCC increased, while the deformation capacity of PCC decreased. The optimal ranges of powder‐liquid ratio and cement ratio for PCC were 0.35–0.4 and 0.3‐0.4, respectively. Furthermore, the increased powder‐liquid ratio and cement ratio made the total pore volume decreased and pore structure refined, which improved the compactness of PCC, thus influencing the performance of PCC macroscopically. An achievement for the study is a flexible composite material, which was formulated with the polymer film as continuous base phase, as well as the inorganic composition and cement hydrates as dispersion phase. The material can effectively improve the economy and practicability of cementation of fissures for airfield pavement.


  • Open Access

    Experimental Study on the Strength and Deformation Characteristics of Concrete under True Triaxial Compression after Sulfate Attack

    by Wei Xia, Erlei Bai, Jinyu Xu, Gaojie Liu

    To explore the mechanical properties of concrete under true triaxial static compressive load after sulfate attack, uniaxial static compression test and true triaxial static compression test at four stress ratios were carried out on concrete specimens immersed in 15% sulfate solution for 0–120 days by the integrated true triaxial static and dynamic load testing system, and the variation of performance indicators such as the strength and deformation of concrete under the coupling action of sulfate attack and complex stress state was analyzed. The results show that the uniaxial compressive strength of concrete increases at the beginning and then decreases with the increase of sulfate attack time and reaches the peak on the 30th day, with an increase rate of 16.57%; the strength of concrete under triaxial compression increases significantly, and the maximum triaxial compressive strength is 3.18 times of uniaxial compressive strength under the combination of 0‐day sulfate attack and 0.2 : 0.8 stress ratio; and the deterioration of concrete under sulfate attack is more prominent at high confining pressure, and as the sulfate attack worsens, the sensitivity of triaxial compressive strength of concrete to lateral compressive stress is reduced. In conclusion, triaxial compression can significantly enhance the ductility of concrete by playing a role in restraining the deformation and cracking of concrete after sulfate attack.


  • Open Access

    Calibration of damping coefficient in discrete element method simulation

    by Zhong Wen-Zhen, He Ke-Jing, Zhou Zhao-Yao, Xia Wei, Li Yuan-Yuan

    In the discrete element method, the damping coefficient, which is a key parameter for rational simulation, is uncertain and often chosen based on researchers experience. To make the physical model reflect the reality better, in this paper acoustic technology is used to calibrate the damping coefficient. Oscillogram of the acoustic wave generated by the collisions is analyzed and the calibrated damping coefficient is obtained to be 0.5. The calibrated parameters are used to simulate the random packing process of 2000 monosize spherical particles. The final packing density is 0.625, which is in accordance with the classic measurements quite well. Besides the obtained correct damping coefficient, in this paper both the usefulness of the physical model and the practicability of acoustic technology for detecting the collision time are also demonstrated precisely.