FWFabian Wiesemüller

Fabian Wiesemüller

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fabian Wiesemüller has a total of 29 co-authors. Here are the top co-authors by number of shared publications:

  • Mirko Kovac

    Aerial Robotics Laboratory, Imperial College London, London, U.K.

    7 shared publications
  • Yijie Hu

    Laboratory for Cellulose & Wood Materials Empa - Swiss Federal Laboratories for Materials Science and Technology 8600 Dübendorf Switzerland

    4 shared publications
  • Dominik Bachmann

    Transport at Nanoscale Interfaces Laboratory Empa - Swiss Federal Laboratories for Materials Science and Technology 8600 Dübendorf Switzerland

    3 shared publications
  • Severin Meyer

    Laboratory of Sustainability Robotics Empa - Swiss Federal Laboratories for Materials Science and Technology 8600 Dübendorf Switzerland

    3 shared publications
  • Andrea Giordano

    Laboratory of Sustainability Robotics Empa ‐ Swiss Federal Laboratories for Materials Science and Technology 8600 Dübendorf Switzerland

    2 shared publications
  • André Tristany Farinha

    Laboratory of Sustainability Robotics Empa ‐ Swiss Federal Laboratories for Materials Science and Technology 8600 Dübendorf Switzerland

    2 shared publications

Latest Publications

  • Open Access

    A Soft Robotic Morphing Wing for Unmanned Underwater Vehicles

    by Andrea Giordano, Liam Achenbach, Daniel Lenggenhager, Fabian Wiesemüller, Roger Vonbank, Claudio Mucignat, André Tristany Farinha, Pham Huy Nguyen, Robert Katzschmann, Sophie F Armanini, et al.


  • Open Access

    A Soft Robotic Morphing Wing for Unmanned Underwater Vehicles

    by Andrea Giordano, Liam Achenbach, Daniel Lenggenhager, Fabian Wiesemüller, Roger Vonbank, Claudio Mucignat, André Tristany Farinha, Pham Huy Nguyen, Robert Katzschmann, Sophie F Armanini, et al.

    Actuators based on soft elastomers offer significant advantages to the field of robotics, providing greater adaptability, improving collision resilience, and enabling shape‐morphing. Thus, soft fluidic actuators have seen an expansion in their fields of application. Closed‐cycle hydraulic systems are pressure agnostic, enabling their deployment in extremely high‐pressure conditions, such as deep‐sea environments. However, soft actuators have not been widely adopted on unmanned underwater vehicle control surfaces for deep‐sea exploration due to their unpredictable hydrodynamic behavior when camber‐morphing is applied. This study presents the design and characterization of a soft wing and investigates its feasibility for integration into an underwater glider. It is found that the morphing wing enables the glider to adjust the lift‐to‐drag ratio to adapt to different flow conditions. At the operational angle of attack of 12.5°, the lift‐to‐drag ratio ranges from −70% to +10% compared to a rigid version. Furthermore, it reduces the need for internal moving parts and increases maneuverability. The findings lay the groundwork for the real‐world deployment of soft robotic principles capable of outperforming existing rigid systems. With the herein‐described methods, soft morphing capabilities can be enabled on other vehicles.


  • Open Access

    Biopolymer Cryogels for Transient Ecology‐Drones

    by Fabian Wiesemüller, Severin Meyer, Yijie Hu, Dominik Bachmann, Annapaola Parrilli, Gustav Nyström, Mirko Kovač


  • Open Access

    Biopolymer Cryogels for Transient Ecology‐Drones

    by Fabian Wiesemüller, Severin Meyer, Yijie Hu, Dominik Bachmann, Annapaola Parrilli, Gustav Nyström, Mirko Kovač

    Aerial robots can autonomously collect temporal and spatial high‐resolution environmental data. This data can be utilized to develop mathematical ecology models to understand the impact of climate change on the habitat. In case of drone malfunction, the incorporated materials can threaten vulnerable environments. The recent introduction of transient robotics enables the development of biodegradable, environmental‐sensing drones capable of degrading in their environment. However, manufacturing methods for environmental‐sensing transient drones are rarely discussed. Herein, a manufacturing framework and material selection process featuring biopolymer‐based, high‐strength composite cryogels, and printed carbon‐based electronics for transient drones are highlighted. It is found that gelatin‐ and cellulose‐based cryogels mechanically outperform other biopolymer composites while having a homogeneous microstructure and high stiffness‐to‐weight ratio. The selected materials are used to manufacture a flying‐wing air‐frame, while the incorporated sensing skin is capable of measuring the elevons’ deflection angles as well as ambient temperature. It is demonstrated in the results how gelatin–cellulose cryogels can be used to manufacture lightweight transient drones, while printing carbon‐conductive electronics is a viable method for designing sustainable, integrated sensors. The proposed methods can be used to guide the development of lightweight and rapidly degrading robots, featuring eco‐friendly sensing capabilities. An interactive preprint version of the article can be found here: https://doi.org/10.22541/au.167506513.33779420/v1.


  • Open Access

    High-performance Biopolymer Cryogels for Transient Sensing Ecology-drones

    by Fabian Wiesemüller, Severin Meyer, Yijie Hu, Dominik Bachmann, Annapaola Parrilli, Gustav Nyström, Mirko Kovac

    Aerial robots can autonomously collect temporal and spatial high-resolution environmental data. This data can then be utilized to develop mathematical ecology models to understand the impact of climate change on our habitat. In case of the drone's malfunction the incorporated materials can threaten vulnerable environments. The recent introduction of transient robotics has enabled the development of biodegradable, environmental sensing drones capable of degrading in their environment. However, manufacturing methods for environmental sensing transient drones are rarely discussed. In this work, we highlight a manufacturing framework and material selection process featuring biopolymer-based, high-strength composite cryogels and printed carbon-based electronics for transient drones. We found that gelatin and cellulose based cryogels mechanically outperform other biopolymer composites while having a homogeneous micro-structure and high stiffness-to-weight ratio. The selected materials are used to manufacture a flying-wing air-frame, while the incorporated sensing skin is capable of measuring the elevons' deflection angles as well as ambient temperature. Our results demonstrate how gelatin-cellulose cryogels can be used to manufacture lightweight transient drones while printing carbon conductive electronics is a viable method for designing sustainable, integrated sensors. The proposed methods can be used to guide the development of lightweight and rapidly degrading robots, featuring eco-friendly sensing capabilities. Corresponding author(s) Email:    fabian.wiesemueller@empa.ch , mirko.kovac@empa.ch 

  • Open Access

    Transient bio-inspired gliders with embodied humidity responsive actuators for environmental sensing

    by Fabian Wiesemüller, Ziwen Meng, Yijie Hu, Andre Farinha, Yunus Govdeli, Pham H. Nguyen, Gustav Nyström, Mirko Kovač

    Collecting temporal and spatial high-resolution environmental data can guide studies in environmental sciences to gain insights in ecological processes. The utilization of automated robotic systems to collect these types of data can maximize accuracy, resilience, and deployment rate. Furthermore, it reduces the risk to researchers deploying sensors in inaccessible environments and can significantly increase the cost-effectiveness of such studies. The introduction of transient robotic systems featuring embodied environmental sensors pushes towards building a digital ecology, while introducing only minimal disturbance to the environment. Transient robots made from fully biodegradable and non-fossil based materials, do not develop into hazardous e-waste at the end of their lifetime and can thus enable a broader adoption for environmental sensing in the real world. In this work, our approach towards the design of transient robots includes the integration of humidity-responsive materials in a glider, which is inspired by the Alsomitra macrocarpa seed. The design space of these gliders is explored and their behavior studied numerically, which allows us to make predictions on their flight characteristics. Results are validated against experiments, which show two different gliding behaviors, that can help improve the spread of the sensors. By tailoring the Cellulose-Gelatin composition of the humidity actuator, self-folding systems for selective rainwater exposure can be designed. The pH sensing layer, protected by the actuator, provides visual feedback on the pH of the rainwater. The presented methods can guide further concepts developing transient aerial robotic systems for sustainable, environmental monitoring.


  • Open Access

    Self-Sensing Cellulose Structures With Design-Controlled Stiffness

    by Fabian Wiesemuller, Crystal Winston, Alexandre Poulin, Xavier Aeby, Aslan Miriyev, Thomas Geiger, Gustav Nystrom, Mirko Kovac

    Robots are often used for sensing and sampling in natural environments. Within this area, soft robots have become increasingly popular for these tasks because their mechanical compliance makes them safer to interact with. Unfortunately, if these robots break while working in vulnerable environments, they create potentially hazardous waste. Consequently, the development of compliant, biodegradable structures for soft, eco-robots is a relevant research area that we explore here. Cellulose is one of the most abundant biodegradable materials on earth, but it is naturally very stiff, which makes it difficult to use in soft robots. Here, we look at both biologically and kirigami inspired structures that can be used to reduce the stiffness of cellulose based parts for soft robots up to a factor of 19 000. To demonstrate this, we build a compliant force and displacement sensing structure from microfibrillated cellulose. We also describe a novel manufacturing technique for these structures, provide mechanical models that allow designers to specify their stiffness, and conclude with a description of our structure's performance.