Yunfei Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yunfei Wang has a total of 268 co-authors. Here are the top co-authors by number of shared publications:
- Xiaodan Gu
School of Polymer Science and Engineering, Center for Optoelectronic Materials and Devices, The University of Southern Mississippi, Hattiesburg, USA
39 shared publications - Simon Rondeau-Gagné
University of Windsor
9 shared publications - Chenhui Zhu
Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, USA
6 shared publications - Ting Lei
Key Laboratory of Polymer Chemistry and Physics of Ministry of Education, School of Materials Science and Engineering, Peking University, Beijing, China
6 shared publications - Yi Liu
The Molecular Foundry Lawrence Berkeley National Laboratory Berkeley California USA
6 shared publications Zhiqiang Cao
School of Polymer Science and Engineering, Center for Optoelectronic Materials and Devices
6 shared publications
Latest Publications
- Open Access
- 9 June 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (24) , 17303-17315
A Robotic High-Throughput Grid-Search Platform for Mapping Phase Behavior in Triblock Copolymer–Homopolymer Blends
We present a high-throughput experimental investigation of the phase behavior in triblock copolymers (PS-b-PB-b-PS and PS-b-PI-b-PS) and polystyrene (PS) homopolymer blends as a function of homopolymer molecular weight (MW) and blend ratio. Using a robotic thin-film processing platform (NOVA) integrated with Grazing Incidence Small-Angle X-ray Scattering (GISAXS) and Atomic Force Microscopy (AFM), we systematically mapped the order–disorder transition (ODT) boundaries and domain spacing evolution across a broad MW range (4.0–101.3 kDa) with varying homopolymer loadings (10% to 90%). The results reveal three distinct regimes: low-MW homopolymers, corresponding to the wet-brush regime produced only gradual domain swelling before disordering at high blend ratios (weight fraction); medium-MW homopolymers, corresponding to thedry-brush regime induced significant domain spacing increase up to 80% followed by earlier disordering, while high-MW homopolymers led to macrophase separation with minimal changes in domain spacing. Additionally, coarse-grained molecular dynamics simulations confirmed our experimental finding that in the low-MW region, the PS homopolymer uniformly distributed in the PS domain. These findings demonstrate that homopolymer molecular weight critically governs both the extent of domain swelling and the onset of disorder in triblock copolymer systems. This high-throughput platform enables the rapid mapping of composition–morphology relationships and can be integrated with AI/ML tools for designing next-generation nanostructured polymers.
- 9 June 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (24) , 17303-17315
Open AccessA Robotic High-Throughput Grid-Search Platform for Mapping Phase Behavior in Triblock Copolymer–Homopolymer Blends
We present a high-throughput experimental investigation of the phase behavior in triblock copolymers (PS-b-PB-b-PS and PS-b-PI-b-PS) and polystyrene (PS) homopolymer blends as a function of homopolymer molecular weight (MW) and blend ratio. Using a robotic thin-film processing platform (NOVA) integrated with Grazing Incidence Small-Angle X-ray Scattering (GISAXS) and Atomic Force Microscopy (AFM), we systematically mapped the order–disorder transition (ODT) boundaries and domain spacing evolution across a broad MW range (4.0–101.3 kDa) with varying homopolymer loadings (10% to 90%). The results reveal three distinct regimes: low-MW homopolymers, corresponding to the wet-brush regime produced only gradual domain swelling before disordering at high blend ratios (weight fraction); medium-MW homopolymers, corresponding to thedry-brush regime induced significant domain spacing increase up to 80% followed by earlier disordering, while high-MW homopolymers led to macrophase separation with minimal changes in domain spacing. Additionally, coarse-grained molecular dynamics simulations confirmed our experimental finding that in the low-MW region, the PS homopolymer uniformly distributed in the PS domain. These findings demonstrate that homopolymer molecular weight critically governs both the extent of domain swelling and the onset of disorder in triblock copolymer systems. This high-throughput platform enables the rapid mapping of composition–morphology relationships and can be integrated with AI/ML tools for designing next-generation nanostructured polymers.
- Open Access
- 29 May 2026
- Published by American Chemical Society (ACS) in JACS Au
- Vol. 6 (6) , 3153-3163
Automated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning
Supramolecular polymer blends (SPBs) offer tunable morphologies that dictate their macroscopic properties, yet their rational design is limited by the absence of predictive structure–morphology models. Here, we introduce a data-driven high-throughput workflow that integrates modular polymer synthesis, robotic formulation, automated morphology characterization, and machine learning (ML) for accelerated SPB discovery. Using a plug-and-play synthetic strategy, 33 hydrogen-bonding end-functional homopolymers were prepared and orthogonally combined to generate 260 SPBs in 1 day. A fully automated atomic force microscopy (AFM) pipeline enabled systematic imaging, producing 2340 morphology data sets with minimal human intervention. Domain spacings were extracted through complementary image-processing methods and used to train ML models. A support vector regression (SVR) model accurately predicted target phase-separation sizes (50, 100, and 150 nm), which were experimentally validated. This work demonstrates the power of coupling high-throughput experimentation with ML to accelerate morphology discovery and provides one of the first large-scale experimental data sets for supramolecular polymer systems.
- 29 May 2026
- Published by American Chemical Society (ACS) in JACS Au
- Vol. 6 (6) , 3153-3163
Open AccessAutomated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning
Supramolecular polymer blends (SPBs) offer tunable morphologies that dictate their macroscopic properties, yet their rational design is limited by the absence of predictive structure–morphology models. Here, we introduce a data-driven high-throughput workflow that integrates modular polymer synthesis, robotic formulation, automated morphology characterization, and machine learning (ML) for accelerated SPB discovery. Using a plug-and-play synthetic strategy, 33 hydrogen-bonding end-functional homopolymers were prepared and orthogonally combined to generate 260 SPBs in 1 day. A fully automated atomic force microscopy (AFM) pipeline enabled systematic imaging, producing 2340 morphology data sets with minimal human intervention. Domain spacings were extracted through complementary image-processing methods and used to train ML models. A support vector regression (SVR) model accurately predicted target phase-separation sizes (50, 100, and 150 nm), which were experimentally validated. This work demonstrates the power of coupling high-throughput experimentation with ML to accelerate morphology discovery and provides one of the first large-scale experimental data sets for supramolecular polymer systems.
- 7 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (15) , 11545-11557
Realizing Ultralow Energetic Disorder and High Thermoelectric Performances via Nanoscale Polymer Packing Control
Charge transport and thermoelectric (TE) properties of conjugated polymers are largely determined by their solid-state energetic disorders. Previous studies have focused on the energetic disorders or traps that result from dihedral angle rotations of the polymer backbone. However, this fails to explain the largely different charge transport properties in many conjugated polymers. Here, we investigate the charge transport and TE properties of two isomeric polymers with highly rigid backbones and low energetic disorders along the chain. Both polymers have similar ultralow charge transport activation energies (<35 meV), but exhibit vastly different charge transport properties. We found that P(PzDPP-Pz) with a linear backbone exhibited a high n-type TE power factor, over 2 orders of magnitude higher than its isomer P(PzDPP-Dz). By utilizing multiple characterizations and molecular simulations, we, for the first time, rule out the well-known dihedral-angle rotation disorders and unveil that the disorders and traps originate from the nanoscale polymer packing structures. Our work provides insight into the origins of the various types of disorders and traps across multilevel nanoscale structures in polymer semiconductors.
- 7 April 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (15) , 11545-11557
Realizing Ultralow Energetic Disorder and High Thermoelectric Performances via Nanoscale Polymer Packing Control
Charge transport and thermoelectric (TE) properties of conjugated polymers are largely determined by their solid-state energetic disorders. Previous studies have focused on the energetic disorders or traps that result from dihedral angle rotations of the polymer backbone. However, this fails to explain the largely different charge transport properties in many conjugated polymers. Here, we investigate the charge transport and TE properties of two isomeric polymers with highly rigid backbones and low energetic disorders along the chain. Both polymers have similar ultralow charge transport activation energies (<35 meV), but exhibit vastly different charge transport properties. We found that P(PzDPP-Pz) with a linear backbone exhibited a high n-type TE power factor, over 2 orders of magnitude higher than its isomer P(PzDPP-Dz). By utilizing multiple characterizations and molecular simulations, we, for the first time, rule out the well-known dihedral-angle rotation disorders and unveil that the disorders and traps originate from the nanoscale polymer packing structures. Our work provides insight into the origins of the various types of disorders and traps across multilevel nanoscale structures in polymer semiconductors.
- Open Access
- 20 February 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (5) , 2293-2304
Tuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers
Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) and Mo(tfd-CO2Me)3. Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F4TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO2Me)3. Although the F4TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO2Me)3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO2Me)3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F4TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.
- 20 February 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (5) , 2293-2304
Open AccessTuning Thermal Stability through Dopant Size in Chemically Doped DPP–Thiophene Polymers
Molecular doping of conjugated polymers (CPs) is a key strategy for improving the performance of organic electronics devices, particularly thermoelectrics. Doped donor–acceptor (D–A) conjugated polymers, characterized by a tunable energy gap between the Fermi level and the transport band, show great promise in achieving high electrical conductivity (σ) while preserving a favorable Seebeck coefficient (S). Despite the promising performance enhancement of chemically doped D–A polymers, their thermal stability remains largely underexplored, a crucial consideration for the long-term operation of organic thermoelectric devices. In this study, we investigated the dopant size-dependent thermal stability of a diketopyrrolopyrrole-thiophene (DPP-T) D–A copolymer, utilizing two p-dopants: 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) and Mo(tfd-CO2Me)3. Temperature-dependent UV–vis–NIR spectroscopy revealed that DPP-T/F4TCNQ is more prone to dedoping under a high temperature thermal stress than DPP-T/Mo(tfd-CO2Me)3. Although the F4TCNQ doped polymer shows higher initial in-plane conductivity than its Mo(tfd-CO2Me)3 counterpart, it undergoes a conductivity loss of more than an order of magnitude after annealing at 120 °C for 30 min. In contrast, the in-plane conductivity of DPP-T/Mo(tfd-CO2Me)3 remains stable under the same thermal conditions. Thermogravimetric analysis ruled out dopant sublimation as a primary contributor to dedoping, leading us to attribute the conductivity loss in F4TCNQ-doped DPP-T to dopant phase separation and migration. This observation was further confirmed by X-ray scattering studies and nanoscale infrared microscopy and spectroscopy studies. This work could provide further insights into the thermal stability of doped conjugated polymers and suggests that incorporating bulkier dopants is an effective strategy to enhance the thermal robustness of doped DPP-type systems.
- Open Access
- 11 January 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (2) , 714-727
Machine Learning Framework for Characterizing Processing–Structure Relationship in Block Copolymer Thin Films
The morphology of block copolymers (BCPs) critically influences material properties and applications. This work introduces a machine learning (ML)-enabled, high-throughput framework for analyzing grazing incidence small-angle X-ray scattering (GISAXS) data and atomic force microscopy (AFM) images to characterize BCP thin film morphology. A convolutional neural network was trained to classify AFM images by surface features, achieving 97% testing accuracy. Classified images were then analyzed to extract 2D grain size measurements from the samples in a high-throughput manner. ML models were trained to predict domain orientation based on processing parameters such as solvent ratio, additive type, and additive ratio. GISAXS-based properties were predicted with strong performances (R2 > 0.75), while AFM-based property predictions were less accurate (R2 < 0.60), likely due to the localized nature of AFM measurements compared to the bulk information captured by GISAXS. Beyond model performance, interpretability was addressed using SHapley Additive exPlanations (SHAP). SHAP analysis revealed that the additive ratio had the largest impact on morphological predictions, where additive provides the BCP chains with increased volume to rearrange into thermodynamically favorable morphologies. This interpretability helps validate model predictions and offers insight into parameter importance. Altogether, the presented framework combining high-throughput characterization and interpretable ML offers an approach to exploring and optimizing BCP thin film morphology across a broad processing landscape.
- 11 January 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (2) , 714-727
Open AccessMachine Learning Framework for Characterizing Processing–Structure Relationship in Block Copolymer Thin Films
The morphology of block copolymers (BCPs) critically influences material properties and applications. This work introduces a machine learning (ML)-enabled, high-throughput framework for analyzing grazing incidence small-angle X-ray scattering (GISAXS) data and atomic force microscopy (AFM) images to characterize BCP thin film morphology. A convolutional neural network was trained to classify AFM images by surface features, achieving 97% testing accuracy. Classified images were then analyzed to extract 2D grain size measurements from the samples in a high-throughput manner. ML models were trained to predict domain orientation based on processing parameters such as solvent ratio, additive type, and additive ratio. GISAXS-based properties were predicted with strong performances (R2 > 0.75), while AFM-based property predictions were less accurate (R2 < 0.60), likely due to the localized nature of AFM measurements compared to the bulk information captured by GISAXS. Beyond model performance, interpretability was addressed using SHapley Additive exPlanations (SHAP). SHAP analysis revealed that the additive ratio had the largest impact on morphological predictions, where additive provides the BCP chains with increased volume to rearrange into thermodynamically favorable morphologies. This interpretability helps validate model predictions and offers insight into parameter importance. Altogether, the presented framework combining high-throughput characterization and interpretable ML offers an approach to exploring and optimizing BCP thin film morphology across a broad processing landscape.
- 26 November 2025
- Published by Springer Nature in Nature Materials
- Vol. 25 (3) , 472-480
Enabling efficient electron injection in stretchable OLED
Stretchable organic light-emitting diodes (OLEDs) are transforming human–machine interfaces and wearable technologies; still, their performance is considerably inferior to commercial, non-stretchable OLEDs, mainly limited by inefficient electron injection. We address this by redesigning both the electron transport layer and the cathode. For the former, we design a copolymer structure with high stretchability and ideal energy levels, achieving performance comparable with standard small-molecule electron transport layers. For the latter, we leverage the liquid metals embrittlement effect to confer stretchability to aluminium thin films, without compromising their electrical and optical characteristics. Combining these designs, we demonstrate fully stretchable OLEDs with a very high external quantum efficiency of 8% and a very low turn-on voltage of 3.5 V, which is on par with the reference rigid OLEDs utilizing the same emitter. This work tackles a crucial bottleneck in stretchable OLED development, bridging the performance gap between stretchable OLEDs and standard rigid OLEDs at the device level, paving the way for high-performance, skin-like displays.
- 26 November 2025
- Published by Springer Nature in Nature Materials
- Vol. 25 (3) , 472-480
Enabling efficient electron injection in stretchable OLED
Stretchable organic light-emitting diodes (OLEDs) are transforming human–machine interfaces and wearable technologies; still, their performance is considerably inferior to commercial, non-stretchable OLEDs, mainly limited by inefficient electron injection. We address this by redesigning both the electron transport layer and the cathode. For the former, we design a copolymer structure with high stretchability and ideal energy levels, achieving performance comparable with standard small-molecule electron transport layers. For the latter, we leverage the liquid metals embrittlement effect to confer stretchability to aluminium thin films, without compromising their electrical and optical characteristics. Combining these designs, we demonstrate fully stretchable OLEDs with a very high external quantum efficiency of 8% and a very low turn-on voltage of 3.5 V, which is on par with the reference rigid OLEDs utilizing the same emitter. This work tackles a crucial bottleneck in stretchable OLED development, bridging the performance gap between stretchable OLEDs and standard rigid OLEDs at the device level, paving the way for high-performance, skin-like displays.
- Open Access
- 17 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Automated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning
Supramolecular polymer blends (SPBs) represent a versatile class of polymers whose morphology directly determines their macroscopic properties. However, rational design of SPBs remains hindered by the lack of predictive models describing how molecular features and intermolecular interactions determine morphology. Here, we report a data-driven high-throughput workflow integrating modular synthesis, robotic sample formulation and processing, automated morphology characterization, and machine learning (ML) for SPBs discovery. Using a plug-and-play modular synthetic strategy, 33 hydrogen-bonding end-functional homopolymer precursors were prepared and orthogonally paired to fabricate 260 SPBs within one day. A custom automated atomic force microscopy (AFM) protocol enabled systematic morphological characterization, producing 2340 images with little human intervention. Average phase separation sizes (e.g. domain spacings) was extracted from processed AFM data using multiple complementary approaches and applied to ML model training. Leveraging the high-throughput sample formation and characterization, a high-quality database was curated for SPBs, allowing training of ML models. Guided by support vector regression (SVR) model, target morphologies of 50, 100, and 150 nm were successfully predicted and experimentally validated. This work demonstrates the potential of coupling high-throughput experimentation with ML to accelerate polymer blends phase discovery, providing one of the first large-scale, experimentally derived datasets specifically designed for supramolecular polymer research.
- 17 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessAutomated and High-Throughput Phase Separation Control for Supramolecular Polymer Blends Enabled by Machine Learning
Supramolecular polymer blends (SPBs) represent a versatile class of polymers whose morphology directly determines their macroscopic properties. However, rational design of SPBs remains hindered by the lack of predictive models describing how molecular features and intermolecular interactions determine morphology. Here, we report a data-driven high-throughput workflow integrating modular synthesis, robotic sample formulation and processing, automated morphology characterization, and machine learning (ML) for SPBs discovery. Using a plug-and-play modular synthetic strategy, 33 hydrogen-bonding end-functional homopolymer precursors were prepared and orthogonally paired to fabricate 260 SPBs within one day. A custom automated atomic force microscopy (AFM) protocol enabled systematic morphological characterization, producing 2340 images with little human intervention. Average phase separation sizes (e.g. domain spacings) was extracted from processed AFM data using multiple complementary approaches and applied to ML model training. Leveraging the high-throughput sample formation and characterization, a high-quality database was curated for SPBs, allowing training of ML models. Guided by support vector regression (SVR) model, target morphologies of 50, 100, and 150 nm were successfully predicted and experimentally validated. This work demonstrates the potential of coupling high-throughput experimentation with ML to accelerate polymer blends phase discovery, providing one of the first large-scale, experimentally derived datasets specifically designed for supramolecular polymer research.
- Open Access
- 15 September 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (19) , 7804-7812
Thin-Film Fracture Behavior for Diketopyrrolopyrrole Semiconducting Polymeric Films
Fracture energy, which quantifies a material's resistance to the propagation of a pre-existing crack, is a key parameter for ensuring the mechanical reliability of stretchable organic electronic devices. However, most existing methods, such as a four-point bending fracture energy, utilized for measuring the fracture energy of semiconducting polymeric thin films are complicated by substrate effects, making it challenging to isolate the intrinsic behavior of the film from interfacial influences. In this study, we employed a pseudo free-standing pure shear method to systematically investigate the cohesive fracture energy of poly-(diketopyrrolopyrrole-terthiophene) P-(DPP-T)-based thin films to examine the effects of nanoconfinement, side chain length, degree of crystallinity, and strain rates. This method effectively eliminates substrate interference, enabling a direct assessment of the cohesive fracture energy of P-(DPP-T) thin films. We found that thinner films and those with lower molecular weights exhibited significantly reduced fracture energies due to diminished chain entanglements. Additionally, films with shorter side chains displayed notably higher fracture energies, which were attributed to an increase in the degree of crystallinity. Finally, slower strain rates led to higher fracture energies, consistent with an enhanced stress relaxation. These insights offer practical guidelines for designing mechanically robust semiconducting polymers, contributing to the advancement of reliable, durable, flexible, and wearable electronic devices.
- 15 September 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (19) , 7804-7812
Open AccessThin-Film Fracture Behavior for Diketopyrrolopyrrole Semiconducting Polymeric Films
Fracture energy, which quantifies a material's resistance to the propagation of a pre-existing crack, is a key parameter for ensuring the mechanical reliability of stretchable organic electronic devices. However, most existing methods, such as a four-point bending fracture energy, utilized for measuring the fracture energy of semiconducting polymeric thin films are complicated by substrate effects, making it challenging to isolate the intrinsic behavior of the film from interfacial influences. In this study, we employed a pseudo free-standing pure shear method to systematically investigate the cohesive fracture energy of poly-(diketopyrrolopyrrole-terthiophene) P-(DPP-T)-based thin films to examine the effects of nanoconfinement, side chain length, degree of crystallinity, and strain rates. This method effectively eliminates substrate interference, enabling a direct assessment of the cohesive fracture energy of P-(DPP-T) thin films. We found that thinner films and those with lower molecular weights exhibited significantly reduced fracture energies due to diminished chain entanglements. Additionally, films with shorter side chains displayed notably higher fracture energies, which were attributed to an increase in the degree of crystallinity. Finally, slower strain rates led to higher fracture energies, consistent with an enhanced stress relaxation. These insights offer practical guidelines for designing mechanically robust semiconducting polymers, contributing to the advancement of reliable, durable, flexible, and wearable electronic devices.
- Open Access
- 26 June 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (13) , 6865-6871
Resonant Tender X-ray Scattering for Disclosing the Backbone Conformation of Conjugated Polymers
The backbone conformation of conjugated polymers (CPs) is essential to their performance in electronic applications. Contrast-variation small-angle neutron scattering (CV-SANS) techniques were used to assess the CP’s backbone conformation, which relies on synthesis of deuterated polymers. Such a technique has been proven mature and effective. One drawback is that deuteration labeling might subtly alter polymer’s physical properties due to structural modifications. To address these challenges, we introduce a novel approach utilizing tender X-ray scattering near the sulfur K-edge to distinctly evaluate the backbone versus whole chain conformation for a low-bandgap donor–acceptor CP, poly[(5,6-difluoro- 2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-dialkyl-2,2′;5′,2″;5″,2‴-quaterthiophen-5,5‴-diyl)] (PffBT4T). For PffBT4T dissolved in trimethylbenzene (TMB), the sulfur K-edge is identified at approximately 2477 eV using near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Tender X-ray scattering conducted at presulfur K-edge and on-sulfur K-edge at elevated temperatures facilitated the distinction between the backbone and whole chain conformations. The results demonstrate that for highly flexible polymer, the backbone’s persistence length could be lower than that of the whole chains, suggesting a more flexible backbone. This rapid, label-free method enhances our ability to characterize CP’s backbone conformation efficiently, offering significant implications for the design and optimization of CPs for advanced electronics.
- 26 June 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (13) , 6865-6871
Open AccessResonant Tender X-ray Scattering for Disclosing the Backbone Conformation of Conjugated Polymers
The backbone conformation of conjugated polymers (CPs) is essential to their performance in electronic applications. Contrast-variation small-angle neutron scattering (CV-SANS) techniques were used to assess the CP’s backbone conformation, which relies on synthesis of deuterated polymers. Such a technique has been proven mature and effective. One drawback is that deuteration labeling might subtly alter polymer’s physical properties due to structural modifications. To address these challenges, we introduce a novel approach utilizing tender X-ray scattering near the sulfur K-edge to distinctly evaluate the backbone versus whole chain conformation for a low-bandgap donor–acceptor CP, poly[(5,6-difluoro- 2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-dialkyl-2,2′;5′,2″;5″,2‴-quaterthiophen-5,5‴-diyl)] (PffBT4T). For PffBT4T dissolved in trimethylbenzene (TMB), the sulfur K-edge is identified at approximately 2477 eV using near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Tender X-ray scattering conducted at presulfur K-edge and on-sulfur K-edge at elevated temperatures facilitated the distinction between the backbone and whole chain conformations. The results demonstrate that for highly flexible polymer, the backbone’s persistence length could be lower than that of the whole chains, suggesting a more flexible backbone. This rapid, label-free method enhances our ability to characterize CP’s backbone conformation efficiently, offering significant implications for the design and optimization of CPs for advanced electronics.
- 15 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (17) , 14715-14724
Manipulating Aromaticity to Redirect Topochemical Polymerization Pathways
Topochemical polymerization (TCP) represents an essential route to create regio- and stereoregular polymers through solid-state transformations. Herein, we present an innovative strategy for controlling topochemical polymerization pathways by tailoring the terminal group aromaticity in the para-azaquinodimethane (AQM) ring system. Substituting phenyl groups with less aromatic furyl units extends significant spin density delocalization across the conjugated core upon thermal activation, inducing significant diradicaloid characters at furyl positions and enabling unconventional reactivities in both solution and solid states. Thermal treatment in toluene yields a unique cyclophane dimer formed via furyl-methine C-C coupling, confirmed by X-ray crystallography, while solid-state reactions produce polymers formed via both intercolumnar furyl-methine coupling and intracolumnar methine-methine coupling. The spin-center-directed mechanism underlying these transformations is validated through theoretical modeling and isotopic labeling experiments. This study highlights the prowess of aromaticity modulation in functional pro-aromatic systems, which enables the synthesis of polymers with main chain structures that are otherwise difficult to access.
- 15 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (17) , 14715-14724
Manipulating Aromaticity to Redirect Topochemical Polymerization Pathways
Topochemical polymerization (TCP) represents an essential route to create regio- and stereoregular polymers through solid-state transformations. Herein, we present an innovative strategy for controlling topochemical polymerization pathways by tailoring the terminal group aromaticity in the para-azaquinodimethane (AQM) ring system. Substituting phenyl groups with less aromatic furyl units extends significant spin density delocalization across the conjugated core upon thermal activation, inducing significant diradicaloid characters at furyl positions and enabling unconventional reactivities in both solution and solid states. Thermal treatment in toluene yields a unique cyclophane dimer formed via furyl-methine C-C coupling, confirmed by X-ray crystallography, while solid-state reactions produce polymers formed via both intercolumnar furyl-methine coupling and intracolumnar methine-methine coupling. The spin-center-directed mechanism underlying these transformations is validated through theoretical modeling and isotopic labeling experiments. This study highlights the prowess of aromaticity modulation in functional pro-aromatic systems, which enables the synthesis of polymers with main chain structures that are otherwise difficult to access.