Wei Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wei Cheng has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Yutong Niu
Fujian Key Laboratory of Surface and Interface Engineering for High Performance Materials College of Materials Xiamen University 422 Siming South Road Xiamen 361005 China
7 shared publicationsFuzhong Li
Fujian Key Laboratory of Surface and Interface Engineering for High Performance Materials College of Materials Xiamen University 422 Siming South Road Xiamen 361005 China
5 shared publicationsHewei Zhang
College of Materials, Xiamen University, 422 Siming South Road, Xiamen 361005, China
5 shared publicationsJunyi Wang
Key Laboratory of Functional Materials and Applications of Fujian Province, School of Materials Science and Engineering
5 shared publicationsJiabei Song
College of Materials, Xiamen University, 422 Siming South Road, Xiamen 361005, China
4 shared publicationsWuxi Zhao
Fujian Key Laboratory of Surface and Interface Engineering for High Performance Materials College of Materials Xiamen University 422 Siming South Road Xiamen 361005 P. R. China
4 shared publications
Latest Publications
- 8 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (10) , 7054-7065
Sustainable Cellulose/Silica Composite Aerogels with Enhanced Mechanical Properties and Daytime Radiative Cooling Capability
- 8 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (10) , 7054-7065
Sustainable Cellulose/Silica Composite Aerogels with Enhanced Mechanical Properties and Daytime Radiative Cooling Capability
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (45) , 62285-62296
Amorphous Hydrated Tungsten Oxide Films with Electrochromic Cycling Stability Up to 40 000 Cycles Enabled by Regulating the Coloring Potential and Structural Water
Amorphous tungsten oxide is widely used as an electrochromic (EC) material in smart windows but suffers from poor cycling stability due to the ion trapping effects and structural deterioration during long-term repeated ion intercalation-deintercalation. Herein, we demonstrate that the EC cycling stability of amorphous hydrated tungsten oxide films can be dramatically enhanced to 40 000 cycles without noticeable performance degradation by regulating the structural water content of films and adjusting the coloring potentials of the films in an Al3+-based electrolyte. We found that the enhancement of cycling stability can be attributed to a relatively low concentration of trapped ions and stable microstructures enabled by decreasing the coloring potential in the range from -0.2 to -0.8 V versus Ag/AgCl and increasing the content of structural water to 0.9H2O for WO3. Lower coloring potentials effectively mitigate ion trapping effects and structural damage that typically occur during the ion diffusion-controlled electrochromic process. In addition, more structural water in amorphous hydrated tungsten oxide films facilitates ion diffusion, leading to enhanced ion diffusion kinetics that can alleviate the accumulation of irreversible ions, thereby further improving the cycling stability. This work offers a simple yet effective strategy to enhance the cycling stability of amorphous phase tungsten oxide-based EC materials to a level that meets the requirement of practical application.
- 28 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (45) , 62285-62296
Amorphous Hydrated Tungsten Oxide Films with Electrochromic Cycling Stability Up to 40 000 Cycles Enabled by Regulating the Coloring Potential and Structural Water
Amorphous tungsten oxide is widely used as an electrochromic (EC) material in smart windows but suffers from poor cycling stability due to the ion trapping effects and structural deterioration during long-term repeated ion intercalation-deintercalation. Herein, we demonstrate that the EC cycling stability of amorphous hydrated tungsten oxide films can be dramatically enhanced to 40 000 cycles without noticeable performance degradation by regulating the structural water content of films and adjusting the coloring potentials of the films in an Al3+-based electrolyte. We found that the enhancement of cycling stability can be attributed to a relatively low concentration of trapped ions and stable microstructures enabled by decreasing the coloring potential in the range from -0.2 to -0.8 V versus Ag/AgCl and increasing the content of structural water to 0.9H2O for WO3. Lower coloring potentials effectively mitigate ion trapping effects and structural damage that typically occur during the ion diffusion-controlled electrochromic process. In addition, more structural water in amorphous hydrated tungsten oxide films facilitates ion diffusion, leading to enhanced ion diffusion kinetics that can alleviate the accumulation of irreversible ions, thereby further improving the cycling stability. This work offers a simple yet effective strategy to enhance the cycling stability of amorphous phase tungsten oxide-based EC materials to a level that meets the requirement of practical application.
- 21 May 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (22)
Regulation of Oxygen Vacancies Enables Ultrastable Photoelectrochemical UV Photodetection
Wide‐bandgap semiconductive metal oxides used in photoelectrochemical (PEC) UV photodetectors suffer from poor cycling stability due to electron–hole recombination induced by hole accumulation on the surface and the sluggish reaction kinetics between the photogenerated holes and the surface adsorbents. Here it is reported that regulation of oxygen vacancies in SnO2 nanoparticle clusters leads to dramatical enhancement of the cycling stability of PEC UV photodetection up to 24 h without photocurrent attenuation. Experimental analyses and theoretical calculation reveal that oxygen vacancies can not only induce shallow energy levels that act as “hole buffer center” to regulate the flow of holes to the electrode–electrolyte interface, but also accelerate surface oxidation reaction by lowering the energy barrier, which solves the issue of hole accumulation at the interface and results in greatly enhanced photocurrent stability. This work elucidates the roles of oxygen vacancies in manipulating the charge carrier behaviors in wide‐bandgap semiconductive metal oxides, which offers new perspectives for designing semiconductive metal oxides with enhanced optoelectronic performance.
- 21 May 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (22)
Regulation of Oxygen Vacancies Enables Ultrastable Photoelectrochemical UV Photodetection
Wide‐bandgap semiconductive metal oxides used in photoelectrochemical (PEC) UV photodetectors suffer from poor cycling stability due to electron–hole recombination induced by hole accumulation on the surface and the sluggish reaction kinetics between the photogenerated holes and the surface adsorbents. Here it is reported that regulation of oxygen vacancies in SnO2 nanoparticle clusters leads to dramatical enhancement of the cycling stability of PEC UV photodetection up to 24 h without photocurrent attenuation. Experimental analyses and theoretical calculation reveal that oxygen vacancies can not only induce shallow energy levels that act as “hole buffer center” to regulate the flow of holes to the electrode–electrolyte interface, but also accelerate surface oxidation reaction by lowering the energy barrier, which solves the issue of hole accumulation at the interface and results in greatly enhanced photocurrent stability. This work elucidates the roles of oxygen vacancies in manipulating the charge carrier behaviors in wide‐bandgap semiconductive metal oxides, which offers new perspectives for designing semiconductive metal oxides with enhanced optoelectronic performance.
- 26 March 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (12)
High‐Performance Dual‐Band Electrochromic Smart Windows Based on Amorphous Tungsten Oxide Hydrate Films and Aluminum Ion Electrolytes
It is reported that by introducing structural water into amorphous tungsten oxide and using multivalent Al3+ as electrolyte ions, the tungsten oxide hydrate films exhibit dramatically enhanced dual‐band EC performance. The structural water triggers the surface reduction of tungsten at a relatively low reduction potential, which governs the selective regulation of NIR light. The fast electrochemical kinetics and negligible structural destruction during the surface redox process enable fast and ultrastable NIR regulation. Increasing the reduction potentials, the Al3+ intercalates into the lattice, accompanied by injection of electrons, resulting in the formation of polaron absorbing visible light. The high charges and small radius of Al3+, and the enlarged ion diffusion channels by structural water synergistically facilitate the ion insertion/extraction, leading to enhanced EC performance in the visible light region. The tungsten oxide hydrate film is used as a working electrode to pair with an electrocatalytic counter electrode, with the presence of redox couples in Al3+ based electrolyte, to form a full EC device that exhibits NIR selectivity of 0.66, and cycling stability of 20 000 cycles in NIR region and 8000 cycles in visible region, which enables to design and fabricate large‐size high‐performance dual‐band EC smart window for controllable management of solar heat and light.
- 26 March 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (12)
High‐Performance Dual‐Band Electrochromic Smart Windows Based on Amorphous Tungsten Oxide Hydrate Films and Aluminum Ion Electrolytes
It is reported that by introducing structural water into amorphous tungsten oxide and using multivalent Al3+ as electrolyte ions, the tungsten oxide hydrate films exhibit dramatically enhanced dual‐band EC performance. The structural water triggers the surface reduction of tungsten at a relatively low reduction potential, which governs the selective regulation of NIR light. The fast electrochemical kinetics and negligible structural destruction during the surface redox process enable fast and ultrastable NIR regulation. Increasing the reduction potentials, the Al3+ intercalates into the lattice, accompanied by injection of electrons, resulting in the formation of polaron absorbing visible light. The high charges and small radius of Al3+, and the enlarged ion diffusion channels by structural water synergistically facilitate the ion insertion/extraction, leading to enhanced EC performance in the visible light region. The tungsten oxide hydrate film is used as a working electrode to pair with an electrocatalytic counter electrode, with the presence of redox couples in Al3+ based electrolyte, to form a full EC device that exhibits NIR selectivity of 0.66, and cycling stability of 20 000 cycles in NIR region and 8000 cycles in visible region, which enables to design and fabricate large‐size high‐performance dual‐band EC smart window for controllable management of solar heat and light.
- 19 August 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (40)
Amorphous Hydrated Tungsten Oxides with Enhanced Pseudocapacitive Contribution for Aqueous Zinc‐Ion Electrochromic Energy Storage
Tungsten oxides suffer from sluggish ion diffusion kinetics, limited ion storage capacity, and inadequate stability within the aqueous zinc ion electrolyte, thereby constraining their applicability in electrochromic energy storage devices (EESDs). Here, the amorphous hydrated tungsten oxide films with large optical modulation, fast response speed, large capacity, and high cycling stability are reported, enabled by tuning the contents of structural water and adjusting the pH value of aqueous zinc ion electrolyte. The enhancement of the electrochromic and ion storage performance is mainly due to the introduction of structural water which triggers pseudocapacitive behavior dominated by surface redox reaction, resulting in high electrochemical activity and fast electrochemical kinetics. Meanwhile, the relatively low pH value ensures the chemical stability of the hydrated tungsten oxide film, in synergy with surface redox that avoids ion trapping, leading to extraordinary cycling stability of up to 13000 cycles, marking the state‐of‐the‐art stability for tungsten oxide‐based materials in aqueous electrolyte. Based on the hydrated tungsten oxide films, high‐capacity and stable large‐size EESDs are constructed with the capability of visually monitoring energy status, recovering energy, and regulating light. This work provides a simple yet effective strategy for enhancing the performance of tungsten oxide‐based aqueous zinc ion EESDs.
- 19 August 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (40)
Amorphous Hydrated Tungsten Oxides with Enhanced Pseudocapacitive Contribution for Aqueous Zinc‐Ion Electrochromic Energy Storage
Tungsten oxides suffer from sluggish ion diffusion kinetics, limited ion storage capacity, and inadequate stability within the aqueous zinc ion electrolyte, thereby constraining their applicability in electrochromic energy storage devices (EESDs). Here, the amorphous hydrated tungsten oxide films with large optical modulation, fast response speed, large capacity, and high cycling stability are reported, enabled by tuning the contents of structural water and adjusting the pH value of aqueous zinc ion electrolyte. The enhancement of the electrochromic and ion storage performance is mainly due to the introduction of structural water which triggers pseudocapacitive behavior dominated by surface redox reaction, resulting in high electrochemical activity and fast electrochemical kinetics. Meanwhile, the relatively low pH value ensures the chemical stability of the hydrated tungsten oxide film, in synergy with surface redox that avoids ion trapping, leading to extraordinary cycling stability of up to 13000 cycles, marking the state‐of‐the‐art stability for tungsten oxide‐based materials in aqueous electrolyte. Based on the hydrated tungsten oxide films, high‐capacity and stable large‐size EESDs are constructed with the capability of visually monitoring energy status, recovering energy, and regulating light. This work provides a simple yet effective strategy for enhancing the performance of tungsten oxide‐based aqueous zinc ion EESDs.
Superelastic Cobalt Silicate@Resorcinol Formaldehyde Resin Core‐Shell Nanobelt Aerogel Monoliths with Outstanding Fire Retardant and Thermal Insulating Capability
The practical applications of resorcinol formaldehyde resin (RFR) aerogels are prevented by their poor mechanical properties. Herein, a facile template‐directed method is reported to produce macroscopic free‐standing cobalt silicate (CS)@RFR core‐shell nanobelt aerogels that display superelastic behavior and outstanding thermal insulating and fire‐resistant capability. The synthesis relies on the polymerization of RFR on pre‐formed CS nanobelts which leads to in situ formation of hydrogel monoliths that can be transformed to corresponding aerogels by a freeze‐drying method. The composite nanobelt aerogel can withstand a compressive load of more than 4000 times of its own weight and fully recover after the removal of the weight. It can also sustain 1000 compressive cycles with 6.9% plastic deformation and 91.8% of the maximum stress remaining, with a constant energy loss coefficient as low as 0.16, at the set strain of 30%. The extraordinary mechanical properties are believed to be associated with the structural flexibility of the nanobelts and the RFR‐reinforced joints between the crosslinked nanobelts. These inorganic‐organic composite aerogels also show good thermal insulation and excellent fire‐proof capability. This work provides an effective strategy for fabricating superelastic RFR‐based aerogels which show promising applications in fields such as thermal insulation, energy storage, and catalyst support.
Superelastic Cobalt Silicate@Resorcinol Formaldehyde Resin Core‐Shell Nanobelt Aerogel Monoliths with Outstanding Fire Retardant and Thermal Insulating Capability
The practical applications of resorcinol formaldehyde resin (RFR) aerogels are prevented by their poor mechanical properties. Herein, a facile template‐directed method is reported to produce macroscopic free‐standing cobalt silicate (CS)@RFR core‐shell nanobelt aerogels that display superelastic behavior and outstanding thermal insulating and fire‐resistant capability. The synthesis relies on the polymerization of RFR on pre‐formed CS nanobelts which leads to in situ formation of hydrogel monoliths that can be transformed to corresponding aerogels by a freeze‐drying method. The composite nanobelt aerogel can withstand a compressive load of more than 4000 times of its own weight and fully recover after the removal of the weight. It can also sustain 1000 compressive cycles with 6.9% plastic deformation and 91.8% of the maximum stress remaining, with a constant energy loss coefficient as low as 0.16, at the set strain of 30%. The extraordinary mechanical properties are believed to be associated with the structural flexibility of the nanobelts and the RFR‐reinforced joints between the crosslinked nanobelts. These inorganic‐organic composite aerogels also show good thermal insulation and excellent fire‐proof capability. This work provides an effective strategy for fabricating superelastic RFR‐based aerogels which show promising applications in fields such as thermal insulation, energy storage, and catalyst support.
- 16 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (16) , 15166-15174
Synthesis of Silica-Nanobelt-Based Aerogels with Plasmonic, Magnetic, and Luminescent Functionality
- 16 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (16) , 15166-15174
Synthesis of Silica-Nanobelt-Based Aerogels with Plasmonic, Magnetic, and Luminescent Functionality
- 14 March 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (10)
Structural Water in Amorphous Tungsten Oxide Hydrate Enables Fast and Ultrastable Regulation of Near‐Infrared Light Transmittance
Amorphous tungsten oxides typically show low near infrared (NIR) light selectivity owing to the overlapped modulation of visible and NIR light originating from ion insertion induced polaronic adsorption, and poor cycling stability due to the ion trapping effects during the repeated ion insertion/extraction. Here it is reported that the structural water in amorphous tungsten oxide hydrate can induce selective and fast modulation of NIR light with extremely high cycling stability. The enhanced NIR electrochromic (EC) capability is found to be associated with the dominant pseudocapacitive behavior promoted by the structural water. The pseudocapacitive EC process avoids the deep ion insertion, slow ion diffusion kinetics, and ion trapping effects that typically occur in conventional diffusion‐controlled EC process, leading to high NIR light selectivity, fast response speed, and exceptional cycling stability. By tuning the amount of structural water, it is found that WO3·0.9H2O films show the optimum NIR EC performance with optical modulation of 69%, response times 2 C−1, and cycling stability of 12 000 cycles at the wavelength of 1100 nm, which represents the state‐of‐the‐art NIR EC performance for the tungsten oxide‐based EC materials, making it a promising material for managing solar heat.
- 14 March 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (10)
Structural Water in Amorphous Tungsten Oxide Hydrate Enables Fast and Ultrastable Regulation of Near‐Infrared Light Transmittance
Amorphous tungsten oxides typically show low near infrared (NIR) light selectivity owing to the overlapped modulation of visible and NIR light originating from ion insertion induced polaronic adsorption, and poor cycling stability due to the ion trapping effects during the repeated ion insertion/extraction. Here it is reported that the structural water in amorphous tungsten oxide hydrate can induce selective and fast modulation of NIR light with extremely high cycling stability. The enhanced NIR electrochromic (EC) capability is found to be associated with the dominant pseudocapacitive behavior promoted by the structural water. The pseudocapacitive EC process avoids the deep ion insertion, slow ion diffusion kinetics, and ion trapping effects that typically occur in conventional diffusion‐controlled EC process, leading to high NIR light selectivity, fast response speed, and exceptional cycling stability. By tuning the amount of structural water, it is found that WO3·0.9H2O films show the optimum NIR EC performance with optical modulation of 69%, response times 2 C−1, and cycling stability of 12 000 cycles at the wavelength of 1100 nm, which represents the state‐of‐the‐art NIR EC performance for the tungsten oxide‐based EC materials, making it a promising material for managing solar heat.