Jiabin Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiabin Liang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Shijie You
State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin, P. R. China
1 shared publication- Shijie You
Harbin Institute of Technology
1 shared publication Yixing Yuan
State Key Laboratory of Urban Water Resource and Environment, School of Environment, Harbin Institute of Technology, Harbin, P. R. China
1 shared publication- Yixing Yuan
School of Environment, Harbin Institute of Technology, Harbin 150090, China
1 shared publication Yuan Yuan
School of Biological Engineering
1 shared publication- Yuan Yuan
School of Biological Engineering, Beijing Polytechnic, Beijing 100176, China
1 shared publication
Latest Publications
- Open Access
- 20 July 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (40) , 24976-24984
A tubular electrode assembly reactor for enhanced electrochemical wastewater treatment with a Magnéli-phase titanium suboxide (M-TiSO) anode and in situ utilization
The electrochemical oxidation technology has been widely used for the waste water treatment and water reuse because of its easy-to-operate nature, an effective removal of pollutants and non-secondary pollution. However, the price of electrode materials, the limitation of mass transfer and the associated effects on contaminant degradation hamper its application. Within this context, an in situ utilization tubular electrode assembly reactor (TEAR) was proposed, in which a stainless steel pipe (SSP) was used as the cathode, and a tubular Magnéli-phase titanium suboxide (M-TiSO) anode was posited in the center of that pipe. Besides the cathode and anode, an integral electrochemical system to treat water pollutants was constituted with a spiral static mixer made from three-dimensional (3D) printing. A spiral static mixer was pushed into the interspace of electrodes to minimize the adverse effect caused by inhomogeneous distribution of pollutants. Here, the effects of current density and resident time on the removal of methylene blue (MB) and total organic carbon (TOC) were investigated, the corresponding hydrodynamics was studied using computational fluid dynamics (CFD), and the long-term stability of removing MB by the reactor was discussed. The results indicated that the MB and TOC removal rate was enhanced at specific current density with a static mixer and the velocity distribution tended to be more homogeneous. Moreover, the anode surface shear force and heat transfer were increased by improving the fluid state. This study proposed an in situ utilization concept and provided a potential value for feasible and efficient water treatment.
- 20 July 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (40) , 24976-24984
Open AccessA tubular electrode assembly reactor for enhanced electrochemical wastewater treatment with a Magnéli-phase titanium suboxide (M-TiSO) anode and in situ utilization
The electrochemical oxidation technology has been widely used for the waste water treatment and water reuse because of its easy-to-operate nature, an effective removal of pollutants and non-secondary pollution. However, the price of electrode materials, the limitation of mass transfer and the associated effects on contaminant degradation hamper its application. Within this context, an in situ utilization tubular electrode assembly reactor (TEAR) was proposed, in which a stainless steel pipe (SSP) was used as the cathode, and a tubular Magnéli-phase titanium suboxide (M-TiSO) anode was posited in the center of that pipe. Besides the cathode and anode, an integral electrochemical system to treat water pollutants was constituted with a spiral static mixer made from three-dimensional (3D) printing. A spiral static mixer was pushed into the interspace of electrodes to minimize the adverse effect caused by inhomogeneous distribution of pollutants. Here, the effects of current density and resident time on the removal of methylene blue (MB) and total organic carbon (TOC) were investigated, the corresponding hydrodynamics was studied using computational fluid dynamics (CFD), and the long-term stability of removing MB by the reactor was discussed. The results indicated that the MB and TOC removal rate was enhanced at specific current density with a static mixer and the velocity distribution tended to be more homogeneous. Moreover, the anode surface shear force and heat transfer were increased by improving the fluid state. This study proposed an in situ utilization concept and provided a potential value for feasible and efficient water treatment.
- Open Access
Modeling a Three-Stage Biological Trickling Filter Based on the A2O Process for Sewage Treatment
Biological trickling filters are widely used for sewage treatment. This study models a biological trickling filter based on an anaerobic–anoxic–oxic process (A2O–BTF), established by a combination of aerobic and anaerobic technology. The performance and operational parameters were analyzed using Sumo, a commercially available wastewater treatment process (WWTP) simulation software. The wastewater treatment performance of the anaerobic–anoxic–oxic process biological trickling filter (A2O–BTF), the conventional three-stage biological trickling filter (Three-Stage–BTF), and the single-stage biological trickling filter (Single–BTF) was compared, which indicated the higher performance of A2O–BTF in terms of COD, TN, NH3-N, and TP removal. The operational parameters of A2O–BTF were optimized by Sumo simulation software, and the results showed that the removal efficiency of pollutants was increased by raising the temperature to the range of 13.94–21.60 °C. The dissolved oxygen (DO) in the aerobic reactor enhanced removal efficiency under a saturation concentration of 2.2–2.6 g O2/m3. In addition, the optimization of the reflux ratio promoted the removal efficiency of the pollutants, indicated by the maximum removal efficiency of COD and TN, achieved at the reflux ratio of 2.25, and that of NH3-N and TP, achieved at a reflux ratio of 0.75. This study provides a proof-in-concept demonstration that software modeling can be a useful tool for assisting the optimization of the design and operation of sewage treatment processes.
Open AccessModeling a Three-Stage Biological Trickling Filter Based on the A2O Process for Sewage Treatment
Biological trickling filters are widely used for sewage treatment. This study models a biological trickling filter based on an anaerobic–anoxic–oxic process (A2O–BTF), established by a combination of aerobic and anaerobic technology. The performance and operational parameters were analyzed using Sumo, a commercially available wastewater treatment process (WWTP) simulation software. The wastewater treatment performance of the anaerobic–anoxic–oxic process biological trickling filter (A2O–BTF), the conventional three-stage biological trickling filter (Three-Stage–BTF), and the single-stage biological trickling filter (Single–BTF) was compared, which indicated the higher performance of A2O–BTF in terms of COD, TN, NH3-N, and TP removal. The operational parameters of A2O–BTF were optimized by Sumo simulation software, and the results showed that the removal efficiency of pollutants was increased by raising the temperature to the range of 13.94–21.60 °C. The dissolved oxygen (DO) in the aerobic reactor enhanced removal efficiency under a saturation concentration of 2.2–2.6 g O2/m3. In addition, the optimization of the reflux ratio promoted the removal efficiency of the pollutants, indicated by the maximum removal efficiency of COD and TN, achieved at the reflux ratio of 2.25, and that of NH3-N and TP, achieved at a reflux ratio of 0.75. This study provides a proof-in-concept demonstration that software modeling can be a useful tool for assisting the optimization of the design and operation of sewage treatment processes.