Lixin Qiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Lixin Qiao has a total of 134 co-authors. Here are the top co-authors by number of shared publications:
- Heng Zhang
Key Laboratory of Material Chemistry for Energy Conversion and Storage (Ministry of Education) School of Chemistry and Chemical Engineering Huazhong University of Science and Technology Wuhan China
11 shared publications - Guanglei Cui
Qingdao Industrial Energy Storage Research Institute, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, China
9 shared publications - Michel Armand
Centre for Cooperative Research on Alternative Energies (CIC Energigune) Basque Research and Technology Alliance (BRTA) Vitoria‐Gasteiz Spain
8 shared publications Shanmu Dong
Qingdao Industrial Energy Storage Research Institute, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101, China
7 shared publicationsZili Cui
Qingdao Industrial Energy Storage Research Institute, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101, China
7 shared publicationsXinhong Zhou
College of Chemistry and Molecular Engineering, Qingdao University of Science and Technology, No. 53 Zhengzhou Road, Qingdao 266042, China
6 shared publications
Latest Publications
- 22 October 2026
- Published by Wiley in Advanced Energy Materials
A Tailored Multifunctional Lithium Organosilicate Salt Constructing Robust Interphases for High Voltage Lithium Metal Batteries
Lithium metal batteries (LMBs) have attracted extensive attention due to their high energy density. However, when lithium (Li) metal is paired with high‐voltage cathode materials, its practical application is limited by issues such as continuous oxidative decomposition of electrolytes and the incompatibility between electrolytes and aggressive electrodes. Herein, we synthesize a fluorinated lithium organosilicate salt (i.e., lithium fluorobis(fluoropinacolatoborato)silicate, LiPBS) to address the aforementioned challenges. The results show that the LiPBS can form a protective and rigid‐flexible cathode electrolyte interphase (CEI) on the cathode surface. Simultaneously, PBS − readily forms a coordination ion pair (CIP) with Li + , constructing an inorganic‐rich solid electrolyte interphase (SEI) on the Li anode. Furthermore, Si─O groups in the LiPBS can effectively scavenge HF and H 2 O from the electrolyte. These advantageous properties enable LiCoO 2 (LCO, 1.89 mAh cm −2 )/Li (50 µm) coin and pouch cells to exhibit excellent cycling performance at high voltages and elevated rates‒for example, retaining 82% capacity after 250 cycles at 1 C and 4.5 V, compared to 80% retention after only 67 cycles for the LiPF 6 ‐based counterpart. This performance is maintained even at an elevated temperature of 50°C. This work highlights the crucial role of lithium organosilicate salt in determining the electrochemical performance of LMBs.
- 22 October 2026
- Published by Wiley in Advanced Energy Materials
A Tailored Multifunctional Lithium Organosilicate Salt Constructing Robust Interphases for High Voltage Lithium Metal Batteries
Lithium metal batteries (LMBs) have attracted extensive attention due to their high energy density. However, when lithium (Li) metal is paired with high‐voltage cathode materials, its practical application is limited by issues such as continuous oxidative decomposition of electrolytes and the incompatibility between electrolytes and aggressive electrodes. Herein, we synthesize a fluorinated lithium organosilicate salt (i.e., lithium fluorobis(fluoropinacolatoborato)silicate, LiPBS) to address the aforementioned challenges. The results show that the LiPBS can form a protective and rigid‐flexible cathode electrolyte interphase (CEI) on the cathode surface. Simultaneously, PBS − readily forms a coordination ion pair (CIP) with Li + , constructing an inorganic‐rich solid electrolyte interphase (SEI) on the Li anode. Furthermore, Si─O groups in the LiPBS can effectively scavenge HF and H 2 O from the electrolyte. These advantageous properties enable LiCoO 2 (LCO, 1.89 mAh cm −2 )/Li (50 µm) coin and pouch cells to exhibit excellent cycling performance at high voltages and elevated rates‒for example, retaining 82% capacity after 250 cycles at 1 C and 4.5 V, compared to 80% retention after only 67 cycles for the LiPF 6 ‐based counterpart. This performance is maintained even at an elevated temperature of 50°C. This work highlights the crucial role of lithium organosilicate salt in determining the electrochemical performance of LMBs.
- 2 October 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (40)
Intramolecular charge redistribution of phosphate anions enabling ultrahigh-voltage lithium metal battery of 600 Wh kg −1
The advancement of ultrahigh-voltage lithium metal batteries (LMBs) is hindered by the lack of efficient guidelines for electrolyte material development, with current approaches still largely relying on inefficient trial-and-error methods. Herein, we report a high-performance additive design and screening strategy. A library of phosphorus-centered candidates (containing 15,200 molecules) is constructed by simultaneously introducing electron-withdrawing and electron-donating groups to induce intramolecular charge redistribution and tune the electrochemical properties of the molecules. Through unsupervised machine learning–assisted screening, lithium diperfluoropinacolatophosphate (LiDPFP) is identified as the optimal candidate. LiDPFP features localized electron-deficient and electron-rich regions, which tune interfacial reactivity and enhance lithium ion (Li + ) coordination to promote contact ion pairs. This unique structure leads to the formation of a phosphorus-oxygen polymer-rich cathode electrolyte interphase and a Li 2 O (lithium oxide)–rich solid electrolyte interphase, effectively suppressing cathode degradation and lithium dendrite growth. Consequently, the as-assembled NCM811||Li cells exhibit stable cycling at 4.8 volts over a wide temperature range from −40° to 80°C. A practical 4.7-volt pouch cell with the energy density of 628 Wh kg −1 (watt-hours per kilogram) exhibits an 80% capacity retention rate after 112 cycles. This work combines machine learning with molecular design, exhibiting a paradigm for practical ultrahigh-energy-density LMBs.
- 2 October 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (40)
Intramolecular charge redistribution of phosphate anions enabling ultrahigh-voltage lithium metal battery of 600 Wh kg −1
The advancement of ultrahigh-voltage lithium metal batteries (LMBs) is hindered by the lack of efficient guidelines for electrolyte material development, with current approaches still largely relying on inefficient trial-and-error methods. Herein, we report a high-performance additive design and screening strategy. A library of phosphorus-centered candidates (containing 15,200 molecules) is constructed by simultaneously introducing electron-withdrawing and electron-donating groups to induce intramolecular charge redistribution and tune the electrochemical properties of the molecules. Through unsupervised machine learning–assisted screening, lithium diperfluoropinacolatophosphate (LiDPFP) is identified as the optimal candidate. LiDPFP features localized electron-deficient and electron-rich regions, which tune interfacial reactivity and enhance lithium ion (Li + ) coordination to promote contact ion pairs. This unique structure leads to the formation of a phosphorus-oxygen polymer-rich cathode electrolyte interphase and a Li 2 O (lithium oxide)–rich solid electrolyte interphase, effectively suppressing cathode degradation and lithium dendrite growth. Consequently, the as-assembled NCM811||Li cells exhibit stable cycling at 4.8 volts over a wide temperature range from −40° to 80°C. A practical 4.7-volt pouch cell with the energy density of 628 Wh kg −1 (watt-hours per kilogram) exhibits an 80% capacity retention rate after 112 cycles. This work combines machine learning with molecular design, exhibiting a paradigm for practical ultrahigh-energy-density LMBs.
- Open Access
Cyano-Functionalized Lithium Sulfonimide Salt for High-Voltage Lithium Metal Batteries
Lithium metal batteries are considered one of the most promising technological routes for next-generation energy storage systems with high energy density. However, when paired with high-voltage cathodes such as NCM811, conventional lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-based electrolytes face severe corrosion of the aluminum current collector when the operating voltage exceeds 3.8 V vs. Li+/Li, leading to rapid capacity decay and even cell failure. In this work, we designed and synthesized a cyano-containing lithium salt, lithium cyano(trifluoromethanesulfonyl)imide (LiCTFSI), to address this issue. The electrochemical performance of 1 M LiCTFSI and 1 M LiTFSI in the same carbonate solvent was systematically compared in NCM811/Li cells. The results demonstrate that LiCTFSI effectively suppresses aluminum corrosion at high potentials and forms a thinner and more compact cathode electrolyte interphase to protect NCM811 cathodes. With the LiCTFSI electrolyte, NCM811/Li cells (mass loading = 19.55 mg cm−2) achieve a capacity retention of 81.7% after 200 cycles at a high cutoff voltage of 4.6 V vs. Li+/Li. This work provides a new strategy for developing advanced electrolyte salts for high-voltage, high-energy-density lithium metal batteries.
Open AccessCyano-Functionalized Lithium Sulfonimide Salt for High-Voltage Lithium Metal Batteries
Lithium metal batteries are considered one of the most promising technological routes for next-generation energy storage systems with high energy density. However, when paired with high-voltage cathodes such as NCM811, conventional lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-based electrolytes face severe corrosion of the aluminum current collector when the operating voltage exceeds 3.8 V vs. Li+/Li, leading to rapid capacity decay and even cell failure. In this work, we designed and synthesized a cyano-containing lithium salt, lithium cyano(trifluoromethanesulfonyl)imide (LiCTFSI), to address this issue. The electrochemical performance of 1 M LiCTFSI and 1 M LiTFSI in the same carbonate solvent was systematically compared in NCM811/Li cells. The results demonstrate that LiCTFSI effectively suppresses aluminum corrosion at high potentials and forms a thinner and more compact cathode electrolyte interphase to protect NCM811 cathodes. With the LiCTFSI electrolyte, NCM811/Li cells (mass loading = 19.55 mg cm−2) achieve a capacity retention of 81.7% after 200 cycles at a high cutoff voltage of 4.6 V vs. Li+/Li. This work provides a new strategy for developing advanced electrolyte salts for high-voltage, high-energy-density lithium metal batteries.
- Open Access
Highly Concentrated Carbonate Electrolytes for Stable High-Voltage Lithium Metal Batteries
Lithium metal batteries (LMBs) have been widely studied due to their high energy density; however, the practical implementation of LMBs is limited by issues of uncontrolled dendrite growth, continuous electrolyte decomposition, and poor Coulombic efficiency (CE). Highly concentrated electrolytes (HCEs) have emerged as a promising approach to addressing the above issues. In this work, we propose a new HCE system based on a single carbonate solvent of 2,2,2-trifluoroethyl methyl carbonate (FEMC) with a high concentration of lithium bis(fluorosulfonyl)imide (LiFSI). The resulting electrolytes exhibit enhanced anodic stability and improved compatibility with lithium metal anodes and high-voltage cathodes. The optimized 4 M LiFSI–FEMC HCE achieved the highest CE for Li plating/stripping in Li/Cu cell and lowest overpotential in Li/Li symmetric cells, outperforming both low-concentration FEMC and ethyl methyl carbonate (EMC)-based electrolytes. In full-cell configurations with LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes, the HCE demonstrates stable cycling with minimal capacity fade over 250 cycles. Importantly, the HCE enables stable operation of 4.6 V high-voltage NCM811/Li cells for more than 120 cycles with a high-capacity retention of 88.61%. Post-mortem analysis revealed a more uniform and compact solid electrolyte interphase and a thinner cathode electrolyte interphase, contributing to the enhanced cycling performance.
Open AccessHighly Concentrated Carbonate Electrolytes for Stable High-Voltage Lithium Metal Batteries
Lithium metal batteries (LMBs) have been widely studied due to their high energy density; however, the practical implementation of LMBs is limited by issues of uncontrolled dendrite growth, continuous electrolyte decomposition, and poor Coulombic efficiency (CE). Highly concentrated electrolytes (HCEs) have emerged as a promising approach to addressing the above issues. In this work, we propose a new HCE system based on a single carbonate solvent of 2,2,2-trifluoroethyl methyl carbonate (FEMC) with a high concentration of lithium bis(fluorosulfonyl)imide (LiFSI). The resulting electrolytes exhibit enhanced anodic stability and improved compatibility with lithium metal anodes and high-voltage cathodes. The optimized 4 M LiFSI–FEMC HCE achieved the highest CE for Li plating/stripping in Li/Cu cell and lowest overpotential in Li/Li symmetric cells, outperforming both low-concentration FEMC and ethyl methyl carbonate (EMC)-based electrolytes. In full-cell configurations with LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes, the HCE demonstrates stable cycling with minimal capacity fade over 250 cycles. Importantly, the HCE enables stable operation of 4.6 V high-voltage NCM811/Li cells for more than 120 cycles with a high-capacity retention of 88.61%. Post-mortem analysis revealed a more uniform and compact solid electrolyte interphase and a thinner cathode electrolyte interphase, contributing to the enhanced cycling performance.
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (17) , 5091-5099
Rapid response and wide-band regulation of an electrochromic device achieved by ultra-small V 2 O 5 nanodots and a Zn 2+ /Li + electrolyte
A multi-color transparent electrochromic display with a zinc anode was developed using V 2 O 5 nanodots and a Zn 2+ /Li + electrolyte, achieving wide-band adjustments of vanadate devices and exhibiting excellent electrochromic performance.
- 28 April 2025
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 12 (17) , 5091-5099
Rapid response and wide-band regulation of an electrochromic device achieved by ultra-small V 2 O 5 nanodots and a Zn 2+ /Li + electrolyte
A multi-color transparent electrochromic display with a zinc anode was developed using V 2 O 5 nanodots and a Zn 2+ /Li + electrolyte, achieving wide-band adjustments of vanadate devices and exhibiting excellent electrochromic performance.
- 27 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (37) , 48792-48802
Self-Standing Single-Ion Borate Salt-Based Polymer Electrolyte for Lithium Metal Batteries
Polymer electrolytes (PEs) with excellent flexibility and superior compatibility toward lithium (Li) metal anodes have been deemed as one of the most promising alternatives to liquid electrolytes. However, conventional lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-based dual-ion PEs suffer from a low Li ion transference number and notorious Li dendrite growth. Here, a single-ion conducting polyborate salt without any fluorinated groups, polymeric lithium dihydroxyterephthalic acid borate (PLDPB), is presented for addressing the issues of Li metal batteries. Owing to a nearly immovable bulky anion and the presence of a rigid benzene structure, the PLDPB@poly(ethylene oxide) (PEO) PE exhibits an ultrahigh Li ion transference number (0.94) and excellent mechanical strength, which could significantly restrict the growth of Li dendrites. Postmortem analysis reveals that a fluorine-free solid electrolyte interphase (SEI) enriched with B-O and benzene-containing species is formed on the surface of the Li metal anode, thereby facilitating elimination of excessive parasitic reactions and simultaneously suppressing the formation of Li dendrites. Consequently, the LiFePO4/Li cells with PLDPB@PEO PEs show an improved long-term cycling performance and high capacity retention (90.0%) and Coulombic efficiency (99.9%) after 500 cycles. This work may inspire new ideas to boost the development of single-ion conducting salts for dendrite-free Li metal batteries.
- 27 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (37) , 48792-48802
Self-Standing Single-Ion Borate Salt-Based Polymer Electrolyte for Lithium Metal Batteries
Polymer electrolytes (PEs) with excellent flexibility and superior compatibility toward lithium (Li) metal anodes have been deemed as one of the most promising alternatives to liquid electrolytes. However, conventional lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-based dual-ion PEs suffer from a low Li ion transference number and notorious Li dendrite growth. Here, a single-ion conducting polyborate salt without any fluorinated groups, polymeric lithium dihydroxyterephthalic acid borate (PLDPB), is presented for addressing the issues of Li metal batteries. Owing to a nearly immovable bulky anion and the presence of a rigid benzene structure, the PLDPB@poly(ethylene oxide) (PEO) PE exhibits an ultrahigh Li ion transference number (0.94) and excellent mechanical strength, which could significantly restrict the growth of Li dendrites. Postmortem analysis reveals that a fluorine-free solid electrolyte interphase (SEI) enriched with B-O and benzene-containing species is formed on the surface of the Li metal anode, thereby facilitating elimination of excessive parasitic reactions and simultaneously suppressing the formation of Li dendrites. Consequently, the LiFePO4/Li cells with PLDPB@PEO PEs show an improved long-term cycling performance and high capacity retention (90.0%) and Coulombic efficiency (99.9%) after 500 cycles. This work may inspire new ideas to boost the development of single-ion conducting salts for dendrite-free Li metal batteries.
- Open Access
- 8 November 2023
- Published by OAE Publishing Inc. in Energy Materials
- Vol. 3 (6)
Strategies towards inhibition of aluminum current collector corrosion in lithium batteries
Aluminum (Al) foil, serving as the predominant current collector for cathode materials in lithium batteries, is still unsatisfactory in meeting the increasing energy density demand of rechargeable energy storage systems due to its severe corrosion under high voltages. Such Al corrosion may cause delamination of cathodes, increasement of internal resistance, and catalysis of electrolyte decomposition, thus leading to premature failure of batteries. Hence, a systematic understanding of the corrosion mechanisms and effective anticorrosion strategies are necessary to enhance overall performance of lithium batteries. In this review, the corrosive mechanisms related to Al current collectors are systematically summarized and clarified. In addition, an overview on recent progress and advancement of strategies toward inhibiting Al corrosion is presented. In the end, we also provide a perspective with motivation to stimulate new ideas and research directions to further inhibit Al corrosion to achieve high energy density, long cycle life, and high safety of lithium batteries.
- 8 November 2023
- Published by OAE Publishing Inc. in Energy Materials
- Vol. 3 (6)
Open AccessStrategies towards inhibition of aluminum current collector corrosion in lithium batteries
Aluminum (Al) foil, serving as the predominant current collector for cathode materials in lithium batteries, is still unsatisfactory in meeting the increasing energy density demand of rechargeable energy storage systems due to its severe corrosion under high voltages. Such Al corrosion may cause delamination of cathodes, increasement of internal resistance, and catalysis of electrolyte decomposition, thus leading to premature failure of batteries. Hence, a systematic understanding of the corrosion mechanisms and effective anticorrosion strategies are necessary to enhance overall performance of lithium batteries. In this review, the corrosive mechanisms related to Al current collectors are systematically summarized and clarified. In addition, an overview on recent progress and advancement of strategies toward inhibiting Al corrosion is presented. In the end, we also provide a perspective with motivation to stimulate new ideas and research directions to further inhibit Al corrosion to achieve high energy density, long cycle life, and high safety of lithium batteries.
- Open Access
- 24 January 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (4) , 1955-1964
Molecular-Level Insight into Charge Carrier Transport and Speciation in Solid Polymer Electrolytes by Chemically Tuning Both Polymer and Lithium Salt
The advent of Li-metal batteries has seen progress toward studies focused on the chemical modification of solid polymer electrolytes, involving tuning either polymer or Li salt properties to enhance the overall cell performance. This study encompasses chemically modifying simultaneously both polymer matrix and lithium salt by assessing ion coordination environments, ion transport mechanisms, and molecular speciation. First, commercially used lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt is taken as a reference, where F atoms become partially substituted by one or two H atoms in the -CF3 moieties of LiTFSI. These substitutions lead to the formation of lithium(difluoromethanesulfonyl)(trifluoromethanesulfonyl)imide (LiDFTFSI) and lithium bis(difluoromethanesulfonyl)imide (LiDFSI) salts. Both lithium salts promote anion immobilization and increase the lithium transference number. Second, we show that exchanging archetypal poly(ethylene oxide) (PEO) with poly(ε-caprolactone) (PCL) significantly changes charge carrier speciation. Studying the ionic structures of these polymer/Li salt combinations (LiTFSI, LiDFTFSI or LiDFSI with PEO or PCL) by combining molecular dynamics simulations and a range of experimental techniques, we provide atomistic insights to understand the solvation structure and synergistic effects that impact macroscopic properties, such as Li+ conductivity and transference number.
- 24 January 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (4) , 1955-1964
Open AccessMolecular-Level Insight into Charge Carrier Transport and Speciation in Solid Polymer Electrolytes by Chemically Tuning Both Polymer and Lithium Salt
The advent of Li-metal batteries has seen progress toward studies focused on the chemical modification of solid polymer electrolytes, involving tuning either polymer or Li salt properties to enhance the overall cell performance. This study encompasses chemically modifying simultaneously both polymer matrix and lithium salt by assessing ion coordination environments, ion transport mechanisms, and molecular speciation. First, commercially used lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt is taken as a reference, where F atoms become partially substituted by one or two H atoms in the -CF3 moieties of LiTFSI. These substitutions lead to the formation of lithium(difluoromethanesulfonyl)(trifluoromethanesulfonyl)imide (LiDFTFSI) and lithium bis(difluoromethanesulfonyl)imide (LiDFSI) salts. Both lithium salts promote anion immobilization and increase the lithium transference number. Second, we show that exchanging archetypal poly(ethylene oxide) (PEO) with poly(ε-caprolactone) (PCL) significantly changes charge carrier speciation. Studying the ionic structures of these polymer/Li salt combinations (LiTFSI, LiDFTFSI or LiDFSI with PEO or PCL) by combining molecular dynamics simulations and a range of experimental techniques, we provide atomistic insights to understand the solvation structure and synergistic effects that impact macroscopic properties, such as Li+ conductivity and transference number.
- 31 May 2022
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 144 (22) , 9806-9816
Anion π–π Stacking for Improved Lithium Transport in Polymer Electrolytes
Polymer electrolytes (PEs) with excellent flexibility, processability, and good contact with lithium metal (Li°) anodes have attracted substantial attention in both academic and industrial settings. However, conventional poly(ethylene oxide) (PEO)-based PEs suffer from a low lithium-ion transference number (TLi+), leading to a notorious concentration gradient and internal cell polarization. Here, we report two kinds of highly lithium-ion conductive and solvent-free PEs using the benzene-based lithium salts, lithium (benzenesulfonyl)(trifluoromethanesulfonyl)imide (LiBTFSI) and lithium (2,4,6-triisopropylbenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiTPBTFSI), which show significantly improved TLi+ and selective lithium-ion conductivity. Using molecular dynamics simulations, we pinpoint the strong π-π stacking interaction between pairs of benzene-based anions as the cause of this improvement. In addition, we show that Li°∥Li° and Li°∥LiFePO4 cells with the LiBTFSI/PEO electrolytes present enhanced cycling performance. By considering π-π stacking interactions as a new molecular-level design route of salts for electrolyte, this work provides an efficient and facile novel strategy for attaining highly selective lithium-ion conductive PEs.
- 31 May 2022
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 144 (22) , 9806-9816
Anion π–π Stacking for Improved Lithium Transport in Polymer Electrolytes
Polymer electrolytes (PEs) with excellent flexibility, processability, and good contact with lithium metal (Li°) anodes have attracted substantial attention in both academic and industrial settings. However, conventional poly(ethylene oxide) (PEO)-based PEs suffer from a low lithium-ion transference number (TLi+), leading to a notorious concentration gradient and internal cell polarization. Here, we report two kinds of highly lithium-ion conductive and solvent-free PEs using the benzene-based lithium salts, lithium (benzenesulfonyl)(trifluoromethanesulfonyl)imide (LiBTFSI) and lithium (2,4,6-triisopropylbenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiTPBTFSI), which show significantly improved TLi+ and selective lithium-ion conductivity. Using molecular dynamics simulations, we pinpoint the strong π-π stacking interaction between pairs of benzene-based anions as the cause of this improvement. In addition, we show that Li°∥Li° and Li°∥LiFePO4 cells with the LiBTFSI/PEO electrolytes present enhanced cycling performance. By considering π-π stacking interactions as a new molecular-level design route of salts for electrolyte, this work provides an efficient and facile novel strategy for attaining highly selective lithium-ion conductive PEs.
- 30 June 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 125 (27) , 14818-14826
Unraveling Ion Dynamics and Interactions in an Ionic Liquid Electrolyte with a Protonated Anion for Lithium Batteries
- 30 June 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 125 (27) , 14818-14826
Unraveling Ion Dynamics and Interactions in an Ionic Liquid Electrolyte with a Protonated Anion for Lithium Batteries