Shouxin Zhang
Research Subjects
Shouxin Zhang has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
Bo Yang
State Key Laboratory of NBC Protection for Civilian, Beijing 102205, PR China
5 shared publicationsHeguo Li
State Key Laboratory of Chemistry for NBC Hazards Protection
5 shared publicationsBo Yuan
4 shared publicationsChuan Zhou
State Key Laboratory of NBC Protection for Civilian, Beijing 102205, PR China
4 shared publicationsMin Zhang
State Key Laboratory of Chemistry for NBC Hazards Protection
4 shared publicationsYue Zhao
State Key Laboratory of Chemistry for NBC Hazards Protection
4 shared publications
Latest Publications
- 14 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Hierarchically Porous Super-Hygroscopic Hydrogel with Wide Humidity Regulation Capability for Enhancing Thermal Comfort in Protective Clothing
The impermeable structure of personal protective clothing not only safeguards the wearer in hazardous environments but also traps heat and moisture, which can lead to heat stress. Moisture absorption can regulate humidity inside clothing to promote sweat evaporation and skin cooling, thereby alleviating discomfort. Herein, we developed a hierarchically porous superhygroscopic γ-PGA/UiO-66-NH2/LiCl composite hydrogel for effective moisture management. The material features a hierarchically porous structure combining macropores of γ-PGA and micropores of UiO-66-NH2 that enables efficient water capture across a wide humidity range. Synergistic effects between the porosity of MOFs and the anchoring action of γ-PGA allow the composite material to rapidly absorb water under a low humidity of 30% RH (reaching 20.08 mg/g within 12 min), significantly outperforming the pure γ-PGA hydrogel. Under a high humidity of 90% RH, the dominant role of LiCl enables exceptional water adsorption capacity (1909.86 mg/g at 200 min). The hydrogel achieves ultrahigh saturation moisture uptake of 0.36 g/g and 7.61 g/g under 30% and 90% RH, respectively. The structural stability is attributed to multiple intermolecular interactions including hydrogen bonding and coordination, which collectively contribute to a high tensile strength of 3.81 MPa. After 30 adsorption-desorption cycles and 45 tensile tests, the hydrogel maintains excellent cyclic durability and exceptional mechanical properties. When applied to protective clothing, the composite hydrogel reduces internal relative humidity significantly from 90.1% to 60.7% under moderate sweating and decreases evaporative resistance to just 29.3% of the original value, thereby enhancing the evaporation of sweat from the human body and greatly alleviating heat stress. This work not only focuses on the promising potential of the composite hydrogel in moisture absorption but also provides an effective strategy for improving thermal comfort in personal protective equipment.
- 14 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Hierarchically Porous Super-Hygroscopic Hydrogel with Wide Humidity Regulation Capability for Enhancing Thermal Comfort in Protective Clothing
The impermeable structure of personal protective clothing not only safeguards the wearer in hazardous environments but also traps heat and moisture, which can lead to heat stress. Moisture absorption can regulate humidity inside clothing to promote sweat evaporation and skin cooling, thereby alleviating discomfort. Herein, we developed a hierarchically porous superhygroscopic γ-PGA/UiO-66-NH2/LiCl composite hydrogel for effective moisture management. The material features a hierarchically porous structure combining macropores of γ-PGA and micropores of UiO-66-NH2 that enables efficient water capture across a wide humidity range. Synergistic effects between the porosity of MOFs and the anchoring action of γ-PGA allow the composite material to rapidly absorb water under a low humidity of 30% RH (reaching 20.08 mg/g within 12 min), significantly outperforming the pure γ-PGA hydrogel. Under a high humidity of 90% RH, the dominant role of LiCl enables exceptional water adsorption capacity (1909.86 mg/g at 200 min). The hydrogel achieves ultrahigh saturation moisture uptake of 0.36 g/g and 7.61 g/g under 30% and 90% RH, respectively. The structural stability is attributed to multiple intermolecular interactions including hydrogen bonding and coordination, which collectively contribute to a high tensile strength of 3.81 MPa. After 30 adsorption-desorption cycles and 45 tensile tests, the hydrogel maintains excellent cyclic durability and exceptional mechanical properties. When applied to protective clothing, the composite hydrogel reduces internal relative humidity significantly from 90.1% to 60.7% under moderate sweating and decreases evaporative resistance to just 29.3% of the original value, thereby enhancing the evaporation of sweat from the human body and greatly alleviating heat stress. This work not only focuses on the promising potential of the composite hydrogel in moisture absorption but also provides an effective strategy for improving thermal comfort in personal protective equipment.
- 24 March 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (13) , 5035-5045
Biofriendly Hygroscopic Polyacrylamide Composite Hydrogel Film for Efficient Human Body Thermal Management in High-Temperature Environment
- 24 March 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (13) , 5035-5045
Biofriendly Hygroscopic Polyacrylamide Composite Hydrogel Film for Efficient Human Body Thermal Management in High-Temperature Environment
- 21 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 14623-14633
Manipulating Constitutional Isomerism of Imine Linkages in Interfacially Confined Nanofilms toward Enhanced Fluorescence Sensing
Photoluminescence efficiencies of covalent organic frameworks (COFs) are significantly restricted by electron delocalization and charge transfer among the conjugated skeletons. Two nanofilms using tetraphenylethylene and benzo[c][1,2,5]thiadiazole as the building blocks were facilely prepared via an interfacially confined condensation strategy. The distinct dipole moment orientations of imine linkages are involved in the π-delocalization of conjugated donor-acceptor systems diversely. They also played critical roles in affecting the fluorescence turn-on sensing of the obtained nanofilms for gaseous trifluoroacetic acid (TFA). The joint donor-C═N-acceptor sequence in nanofilm #2 resulted in relatively stronger fluorescence originally than that of nanofilm #1, featuring the disturbed donor-N═C-acceptor sequence. While after blowing trace TFA, the latter nanofilm #1 possessed prominent fluorescence enhancement and obvious color visualization. Comparative transient absorption observations and theoretical calculations elucidated the effective manipulation of the intramolecular charge transfer (ICT) efficiencies among the imine-linked functional skeletons. With the help of a laminated fluorescent sensor, a compact sensing platform was further integrated using optimized nanofilm #1. It exhibited good selectivity, excellent reversibility (≥50 recycles), an extraordinary detection limit (∼0.1 ppt), and a rapid recovery process to gaseous TFA. Our findings provide valuable optimizations of π-linkages in COFs and reliable fluorescent film sensors for monitoring toxic and hazardous gases.
- 21 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (9) , 14623-14633
Manipulating Constitutional Isomerism of Imine Linkages in Interfacially Confined Nanofilms toward Enhanced Fluorescence Sensing
Photoluminescence efficiencies of covalent organic frameworks (COFs) are significantly restricted by electron delocalization and charge transfer among the conjugated skeletons. Two nanofilms using tetraphenylethylene and benzo[c][1,2,5]thiadiazole as the building blocks were facilely prepared via an interfacially confined condensation strategy. The distinct dipole moment orientations of imine linkages are involved in the π-delocalization of conjugated donor-acceptor systems diversely. They also played critical roles in affecting the fluorescence turn-on sensing of the obtained nanofilms for gaseous trifluoroacetic acid (TFA). The joint donor-C═N-acceptor sequence in nanofilm #2 resulted in relatively stronger fluorescence originally than that of nanofilm #1, featuring the disturbed donor-N═C-acceptor sequence. While after blowing trace TFA, the latter nanofilm #1 possessed prominent fluorescence enhancement and obvious color visualization. Comparative transient absorption observations and theoretical calculations elucidated the effective manipulation of the intramolecular charge transfer (ICT) efficiencies among the imine-linked functional skeletons. With the help of a laminated fluorescent sensor, a compact sensing platform was further integrated using optimized nanofilm #1. It exhibited good selectivity, excellent reversibility (≥50 recycles), an extraordinary detection limit (∼0.1 ppt), and a rapid recovery process to gaseous TFA. Our findings provide valuable optimizations of π-linkages in COFs and reliable fluorescent film sensors for monitoring toxic and hazardous gases.
- Open Access
- 24 January 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (3) , 183
A Multi-Method Approach to Analyzing MOFs for Chemical Warfare Simulant Capture: Molecular Simulation, Machine Learning, and Molecular Fingerprints
Mustard gas (HD) is a well-known chemical warfare agent, recognized for its extreme toxicity and severe hazards. Metal–organic frameworks (MOFs), with their unique structural properties, show significant potential for HD adsorption applications. Due to the extreme hazards of HD, most experimental studies focus on its simulants, but molecular simulation research on these simulants remains limited. Simulation analyses of simulants can uncover structure–performance relationships and enable experimental validation, optimizing methods, and improving material design and performance predictions. This study integrates molecular simulations, machine learning (ML), and molecular fingerprinting (MFs) to identify MOFs with high adsorption performance for the HD simulant diethyl sulfide (DES), followed by in-depth structural analysis and comparison. First, MOFs are categorized into Top, Middle, and Bottom materials based on their adsorption efficiency. Univariate analysis, machine learning, and molecular fingerprinting are then used to identify and compare the distinguishing features and fingerprints of each category. Univariate analysis helps identify the optimal structural ranges of Top and Bottom materials, providing a reference for initial material screening. Machine learning feature importance analysis, combined with SHAP methods, identifies the key features that most significantly influence model predictions across categories, offering valuable insights for future material design. Molecular fingerprint analysis reveals critical fingerprint combinations, showing that adsorption performance is optimized when features such as metal oxides, nitrogen-containing heterocycles, six-membered rings, and C=C double bonds co-exist. The integrated analysis using HTCS, ML, and MFs provides new perspectives for designing high-performance MOFs and demonstrates significant potential for developing materials for the adsorption of CWAs and their simulants.
- 24 January 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (3) , 183
Open AccessA Multi-Method Approach to Analyzing MOFs for Chemical Warfare Simulant Capture: Molecular Simulation, Machine Learning, and Molecular Fingerprints
Mustard gas (HD) is a well-known chemical warfare agent, recognized for its extreme toxicity and severe hazards. Metal–organic frameworks (MOFs), with their unique structural properties, show significant potential for HD adsorption applications. Due to the extreme hazards of HD, most experimental studies focus on its simulants, but molecular simulation research on these simulants remains limited. Simulation analyses of simulants can uncover structure–performance relationships and enable experimental validation, optimizing methods, and improving material design and performance predictions. This study integrates molecular simulations, machine learning (ML), and molecular fingerprinting (MFs) to identify MOFs with high adsorption performance for the HD simulant diethyl sulfide (DES), followed by in-depth structural analysis and comparison. First, MOFs are categorized into Top, Middle, and Bottom materials based on their adsorption efficiency. Univariate analysis, machine learning, and molecular fingerprinting are then used to identify and compare the distinguishing features and fingerprints of each category. Univariate analysis helps identify the optimal structural ranges of Top and Bottom materials, providing a reference for initial material screening. Machine learning feature importance analysis, combined with SHAP methods, identifies the key features that most significantly influence model predictions across categories, offering valuable insights for future material design. Molecular fingerprint analysis reveals critical fingerprint combinations, showing that adsorption performance is optimized when features such as metal oxides, nitrogen-containing heterocycles, six-membered rings, and C=C double bonds co-exist. The integrated analysis using HTCS, ML, and MFs provides new perspectives for designing high-performance MOFs and demonstrates significant potential for developing materials for the adsorption of CWAs and their simulants.
- Open Access
Preparation of Thermal Conductivity-Enhanced, Microencapsulated Phase Change Materials Using Cellulose-Assisted Graphene Dispersion for Thermal Regulation in Textiles
To improve the poor thermal conductivity of microencapsulated phase change materials (MPCMs), a strategy was designed with effective combinations between graphene nanosheets (GNs) and shells to prepare thermally conductive MPCMs–GNs by using cellulose nanofibers (CNFs) to assist GN dispersion. The experiments and theoretical calculations both illustrated that CNFs effectively prevented GNs from aggregating due to the strong Van der Walls interactions between CNFs and GNs. The morphologies and structures of MPCMs with and without GNs were characterized by SEM, FTIR and XRD. The thermal properties of MPCMs were evaluated by DSC, TG, and a thermal conductivity test. The MPCMs with 10 wt.% GNs exhibited a melting enthalpy as high as 187.2 J/g and a thermal conductivity as high as 1.214 (W/m⋅K). The results indicate that the prepared MPCMs possessed a good thermal stability. In addition, MPCMs–GNs exhibited outstanding mechanical properties using a nano-indentation test. With an excellent melting enthalpy and thermal conductivity, the prepared MPCMs–GNs/textile showed a potential ability to be used for comfort thermal regulation.
Open AccessPreparation of Thermal Conductivity-Enhanced, Microencapsulated Phase Change Materials Using Cellulose-Assisted Graphene Dispersion for Thermal Regulation in Textiles
To improve the poor thermal conductivity of microencapsulated phase change materials (MPCMs), a strategy was designed with effective combinations between graphene nanosheets (GNs) and shells to prepare thermally conductive MPCMs–GNs by using cellulose nanofibers (CNFs) to assist GN dispersion. The experiments and theoretical calculations both illustrated that CNFs effectively prevented GNs from aggregating due to the strong Van der Walls interactions between CNFs and GNs. The morphologies and structures of MPCMs with and without GNs were characterized by SEM, FTIR and XRD. The thermal properties of MPCMs were evaluated by DSC, TG, and a thermal conductivity test. The MPCMs with 10 wt.% GNs exhibited a melting enthalpy as high as 187.2 J/g and a thermal conductivity as high as 1.214 (W/m⋅K). The results indicate that the prepared MPCMs possessed a good thermal stability. In addition, MPCMs–GNs exhibited outstanding mechanical properties using a nano-indentation test. With an excellent melting enthalpy and thermal conductivity, the prepared MPCMs–GNs/textile showed a potential ability to be used for comfort thermal regulation.
- 17 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (47) , 54582-54589
Humidity Enhances the Solid-Phase Catalytic Ability of a Bulk MOF-808 Metal–Organic Gel toward a Chemical Warfare Agent Simulant
Zirconium-based metal-organic frameworks have emerged as promising materials for detoxifying chemical warfare agents (CWAs) due to their remarkable stability and porosity. However, their practical application is hindered by issues with their powder form and poor catalytic performance in solid-phase degradation. To address these challenges, herein, a granular MOF-808 metal-organic gel (G808) is prepared under optimized conditions for catalytic degradation of the simulant 2-chloroethyl ethyl sulfide (2-CEES), a sulfide blister agent, in a neat state under different humidity conditions. The detoxification performance of G808 toward 2-CEES is significantly enhanced as the content of water present increases. The half-life of 2-CEES decontaminated by G808 can be shortened to 816 s, surpassing those of many other benchmark materials. To confirm the mechanism of catalytic degradation, we used gas chromatography, gas chromatography-mass spectrometry, and theoretical calculations. The findings revealed that hydrolysis was the predominant route. Additionally, granular G808 was reusable and adaptable to high-moisture environments, making it an excellent protective material with practical potential.
- 17 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (47) , 54582-54589
Humidity Enhances the Solid-Phase Catalytic Ability of a Bulk MOF-808 Metal–Organic Gel toward a Chemical Warfare Agent Simulant
Zirconium-based metal-organic frameworks have emerged as promising materials for detoxifying chemical warfare agents (CWAs) due to their remarkable stability and porosity. However, their practical application is hindered by issues with their powder form and poor catalytic performance in solid-phase degradation. To address these challenges, herein, a granular MOF-808 metal-organic gel (G808) is prepared under optimized conditions for catalytic degradation of the simulant 2-chloroethyl ethyl sulfide (2-CEES), a sulfide blister agent, in a neat state under different humidity conditions. The detoxification performance of G808 toward 2-CEES is significantly enhanced as the content of water present increases. The half-life of 2-CEES decontaminated by G808 can be shortened to 816 s, surpassing those of many other benchmark materials. To confirm the mechanism of catalytic degradation, we used gas chromatography, gas chromatography-mass spectrometry, and theoretical calculations. The findings revealed that hydrolysis was the predominant route. Additionally, granular G808 was reusable and adaptable to high-moisture environments, making it an excellent protective material with practical potential.
- 9 May 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 467
Defective UiO-66-NH2 monoliths for optimizing CO2 capture performance
- 9 May 2023
- Published by Elsevier in Chemical Engineering Journal
- Vol. 467
Defective UiO-66-NH2 monoliths for optimizing CO2 capture performance
- 16 February 2023
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 8 (3) , 1220-1229
Dual-State Fluorescent Probe for Ultrafast and Sensitive Detection of Nerve Agent Simulants in Solution and Vapor
The development of fluorescent probes for detecting nerve agents has been the main concern focus of research because of their lethal toxicity for humans. Herein, a probe (PQSP) based on the quinoxalinone unit and the styrene pyridine group was synthesized and could visually detect a sarin simulant diethyl chlorophosphate (DCP) with excellent sensing properties in solution and solid states. Interestingly, PQSP showed an apparent intramolecular charge-transfer process by catalytic protonation after reacting with DCP in methanol, accompanied with the aggregation recombination effect. The sensing process was also verified by nuclear magnetic resonance spectra, scanning electron microscopy, and theoretical calculations. In addition, the papered test strips of loading probe PQSP exhibited an ultrafast response time within 3 s and high sensitivity with a limit of detection of 3 ppb for the detection of DCP vapor. Therefore, this research provides a designed strategy for developing the probes with dual-state emission fluorescence in solution and solid states for detecting DCP sensitively and rapidly, which can be fabricated as chemosensors to visually detect nerve agents in practice.
- 16 February 2023
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 8 (3) , 1220-1229
Dual-State Fluorescent Probe for Ultrafast and Sensitive Detection of Nerve Agent Simulants in Solution and Vapor
The development of fluorescent probes for detecting nerve agents has been the main concern focus of research because of their lethal toxicity for humans. Herein, a probe (PQSP) based on the quinoxalinone unit and the styrene pyridine group was synthesized and could visually detect a sarin simulant diethyl chlorophosphate (DCP) with excellent sensing properties in solution and solid states. Interestingly, PQSP showed an apparent intramolecular charge-transfer process by catalytic protonation after reacting with DCP in methanol, accompanied with the aggregation recombination effect. The sensing process was also verified by nuclear magnetic resonance spectra, scanning electron microscopy, and theoretical calculations. In addition, the papered test strips of loading probe PQSP exhibited an ultrafast response time within 3 s and high sensitivity with a limit of detection of 3 ppb for the detection of DCP vapor. Therefore, this research provides a designed strategy for developing the probes with dual-state emission fluorescence in solution and solid states for detecting DCP sensitively and rapidly, which can be fabricated as chemosensors to visually detect nerve agents in practice.
- Open Access
- 23 June 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (36) , 22125-22130
Synthesis of macroscopic monolithic metal–organic gels for ultra-fast destruction of chemical warfare agents
The potential threat that has originated from chemical warfare agents (CWAs) has promoted the development of advanced materials to enhance the protection of civilian and military personnel. Zr-based metal–organic frameworks (Zr-MOFs) have recently been demonstrated as excellent catalysts for decomposing CWAs, but challenges of integrating the microcrystalline powders of Zr-MOFs into monoliths still remain. Herein, we report hierarchically porous monolithic UiO-66-X xerogels for the destruction of CWAs. We found that the UiO-66-NH2 xerogel with a larger pore size and a higher surface area than the UiO-66-NH2 powder possessed better degradability of 2-chloroethyl ethyl sulfide (2-CEES), which is a sulfur mustard simulant. These UiO-66-X xerogels exhibit outstanding performance for decomposing CWAs. The half-lives of vesicant agent sulfur mustard (HD) and nerve agent O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothioate (VX) are as short as 14.4 min and 1.5 min, respectively. This work is, to the best of our knowledge, the first report on macroscopic monolithic UiO-66-X xerogels for ultrafast decomposition of CWAs.
- 23 June 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (36) , 22125-22130
Open AccessSynthesis of macroscopic monolithic metal–organic gels for ultra-fast destruction of chemical warfare agents
The potential threat that has originated from chemical warfare agents (CWAs) has promoted the development of advanced materials to enhance the protection of civilian and military personnel. Zr-based metal–organic frameworks (Zr-MOFs) have recently been demonstrated as excellent catalysts for decomposing CWAs, but challenges of integrating the microcrystalline powders of Zr-MOFs into monoliths still remain. Herein, we report hierarchically porous monolithic UiO-66-X xerogels for the destruction of CWAs. We found that the UiO-66-NH2 xerogel with a larger pore size and a higher surface area than the UiO-66-NH2 powder possessed better degradability of 2-chloroethyl ethyl sulfide (2-CEES), which is a sulfur mustard simulant. These UiO-66-X xerogels exhibit outstanding performance for decomposing CWAs. The half-lives of vesicant agent sulfur mustard (HD) and nerve agent O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothioate (VX) are as short as 14.4 min and 1.5 min, respectively. This work is, to the best of our knowledge, the first report on macroscopic monolithic UiO-66-X xerogels for ultrafast decomposition of CWAs.