Ahmet Aykaç
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ahmet Aykaç has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
İzEl Ok
Department of Nanoscience and Nanotechnology, Izmir Katip Çelebi University, Izmir, Turkey
3 shared publications- Amirhossein Nassirzadehsaleh2 shared publications
- Emine Özge Akkaş
Nanoscience&Nanotechnology Graduate Programme, Izmir Katip Celebi University, Izmir, Turkey
2 shared publications - Izel Ok
Izmir Katip Celebi University
2 shared publications - Jonathan Kulah2 shared publications
Mustafa Erol
Department of Metallurgical and Material Engineering Dokuz Eylul University Izmir/ Türkiye
2 shared publications
Latest Publications
- 22 September 2026
- Published by Izmir UOD
- p. 501-505
State-of-the-Art in Flexible Piezoelectric Nanobiosensors for Health Monitoring
Health monitoring systems have become increasingly important in modern healthcare due to the rising prevalence of chronic diseases and the demand for remote and personalized services. Technologies such as continuous glucose monitoring, wearable ECG, EEG, EMG, and biochemical nanobiosensors enable real-time physiological assessment beyond conventional clinical environments. However, many existing systems rely on rigid architectures and externally powered modules, limiting long-term wearability and mechanical adaptability. Piezoelectric-based nano sensors have emerged as mechanically responsive sensing mechanisms in wearable platforms. The piezoelectric effect, first described by Curie and Curie (1880), describes the generation of electrical charge under mechanical stress. Owing to this intrinsic electromechanical coupling, piezoelectric materials have been widely used, enabling the passive detection of biomechanical signals without external biasing. Over the last decade, advances in flexible nano-engineered architectures have enabled wearable piezoelectric nanobiosensors. Bio-integrated piezoelectric systems have demonstrated compatibility with physiological environments and responsiveness to biomechanical motions such as cardiac and respiratory activity, while improved nanostructured designs have enhanced mechanical compliance and signal stability under dynamic loading. This study reviews flexible piezoelectric-based health monitoring systems developed over the last decade, focusing on wearable implementations, performance characteristics, and highlighting practical challenges including signal stability and long-term reliability.
- 22 September 2026
- Published by Izmir UOD
- p. 501-505
State-of-the-Art in Flexible Piezoelectric Nanobiosensors for Health Monitoring
Health monitoring systems have become increasingly important in modern healthcare due to the rising prevalence of chronic diseases and the demand for remote and personalized services. Technologies such as continuous glucose monitoring, wearable ECG, EEG, EMG, and biochemical nanobiosensors enable real-time physiological assessment beyond conventional clinical environments. However, many existing systems rely on rigid architectures and externally powered modules, limiting long-term wearability and mechanical adaptability. Piezoelectric-based nano sensors have emerged as mechanically responsive sensing mechanisms in wearable platforms. The piezoelectric effect, first described by Curie and Curie (1880), describes the generation of electrical charge under mechanical stress. Owing to this intrinsic electromechanical coupling, piezoelectric materials have been widely used, enabling the passive detection of biomechanical signals without external biasing. Over the last decade, advances in flexible nano-engineered architectures have enabled wearable piezoelectric nanobiosensors. Bio-integrated piezoelectric systems have demonstrated compatibility with physiological environments and responsiveness to biomechanical motions such as cardiac and respiratory activity, while improved nanostructured designs have enhanced mechanical compliance and signal stability under dynamic loading. This study reviews flexible piezoelectric-based health monitoring systems developed over the last decade, focusing on wearable implementations, performance characteristics, and highlighting practical challenges including signal stability and long-term reliability.
- 22 September 2026
- Published by Izmir UOD
- p. 485-500
Quince Seed Mucilage-Based Nanoemulgel Composites Loaded with Hypericum perforatum Oil
Hypericum perforatum L. oil is a phytotherapeutic agent with well-documented wound-healing and anti- inflammatory activity; however, its biomedical applicability is restricted by poor aqueous dispersibility, instability, and limited formulation robustness, as reported in previous nanogel-based delivery systems. Recent advances in biopolymer-assisted nanoformulations have highlighted the potential of naturally derived matrices to enhance stability and functionality of lipophilic bioactives. In this context, Quince Seeds Mucilage (QSM), a biocompatible and hydrophilic polysaccharide, has demonstrated effective stabilization of essential oil-based systems, supporting its selection as a sustainable formulation component. In this study, a quince seeds mucilage (QSM)-based nanoemulgel system was engineered to enhance oil stability through biopolymer-mediated nano-structuring. Nanoemulgels were prepared via ultrasonication-assisted emulsification. Two stabilization strategies were comparatively evaluated: (i) a Tween 80-based surfactant system and (ii) a cross-linked QSM–sodium alginate biopolymeric network, enabling assessment of synthetic versus natural stabilization mechanisms. Dynamic Light Scattering (DLS) analysis revealed nano-scale droplet sizes within an expected range of approximately 80–200 nm, indicating effective dispersion. Zeta potential values in the ±20 to ±35 mV range suggested moderate-to-good colloidal stability. UV–Vis spectroscopy confirmed successful oil incorporation, while Fourier Transform Infrared Spectroscopy (FTIR) demonstrated intermolecular interactions between oil constituents and the polysaccharide matrix. Swelling studies further indicated favorable hydration behavior under wound-relevant conditions. Overall, QSM-based nanoemulgels provide structurally stable and sustainable nanoformulation platforms. These naturally derived systems hold strong potential for topical wound-healing applications through controlled nano-scale dispersion and biopolymer-assisted stabilization.
- 22 September 2026
- Published by Izmir UOD
- p. 485-500
Quince Seed Mucilage-Based Nanoemulgel Composites Loaded with Hypericum perforatum Oil
Hypericum perforatum L. oil is a phytotherapeutic agent with well-documented wound-healing and anti- inflammatory activity; however, its biomedical applicability is restricted by poor aqueous dispersibility, instability, and limited formulation robustness, as reported in previous nanogel-based delivery systems. Recent advances in biopolymer-assisted nanoformulations have highlighted the potential of naturally derived matrices to enhance stability and functionality of lipophilic bioactives. In this context, Quince Seeds Mucilage (QSM), a biocompatible and hydrophilic polysaccharide, has demonstrated effective stabilization of essential oil-based systems, supporting its selection as a sustainable formulation component. In this study, a quince seeds mucilage (QSM)-based nanoemulgel system was engineered to enhance oil stability through biopolymer-mediated nano-structuring. Nanoemulgels were prepared via ultrasonication-assisted emulsification. Two stabilization strategies were comparatively evaluated: (i) a Tween 80-based surfactant system and (ii) a cross-linked QSM–sodium alginate biopolymeric network, enabling assessment of synthetic versus natural stabilization mechanisms. Dynamic Light Scattering (DLS) analysis revealed nano-scale droplet sizes within an expected range of approximately 80–200 nm, indicating effective dispersion. Zeta potential values in the ±20 to ±35 mV range suggested moderate-to-good colloidal stability. UV–Vis spectroscopy confirmed successful oil incorporation, while Fourier Transform Infrared Spectroscopy (FTIR) demonstrated intermolecular interactions between oil constituents and the polysaccharide matrix. Swelling studies further indicated favorable hydration behavior under wound-relevant conditions. Overall, QSM-based nanoemulgels provide structurally stable and sustainable nanoformulation platforms. These naturally derived systems hold strong potential for topical wound-healing applications through controlled nano-scale dispersion and biopolymer-assisted stabilization.
- 22 September 2026
- Published by Izmir UOD
- p. 422-435
Self-Healing Properties of Tannic Acid-Functionalized ZIF-8/Reduced Graphene Oxide Nanocomposites for Corrosion Protection
The evolution of composite materials has progressed from basic natural mixtures to advanced engineered systems, fueled by the continuous pursuit of enhanced mechanical strength and durability. A pivotal paradigm shift within this domain is "self-healing" technology a biomimetic approach empowering materials to autonomously detect and repair micro-cracks, thereby mitigating catastrophic failure. While conventional polymeric composites often rely on extrinsic microcapsules, recent research prioritizes "smart" nanocontainers for active corrosion control. Such as, Metal-Organic Frameworks (MOFs) have emerged as state-of-the-art reservoirs due to their high specific surface area and stimuli- responsive release capabilities (Atighi et al., 2025; Lee et al., 2015). Especially, their integration with Reduced Graphene Oxide (rGO) enhances the coating's tortuosity and impermeability (Atighi et al., 2025). In addition, some studies proved that Tannic Acid (TA) can serve as a dual-functional green inhibitor and supramolecular cross-linker. So that, we have envisioned to produce a novel TA functionalized Zeolitic imidazolate frameworks (ZIF-8) /rGO composites and investigate their self- healing properties as anti-corrosive protectors. ZIF-8 nanoparticles were synthesized via a facile aqueous room-temperature precipitation method. Following it, rGO was produced from graphite sources using the Hummers' method (Emiru & Ayele, 2017). The active interface was engineered by functionalizing the ZIF-8/rGO nanohybrids with TA through a functionalization-assisted etching process. The chemical functionalization were rigorously characterized using Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, and UV-Vis Spectroscopy. To evaluate the smart self- healing and stimuli-responsive performance, a pH-dependent release test was conducted in different media and monitored via UV-Vis Spectroscopy. These analyses confirmed the successful synthesis of the nanocomposites, with crystallographic phases and spectral bands showing high concordance, thereby validating the purity and stability of the produced nanocontainers.
- 22 September 2026
- Published by Izmir UOD
- p. 422-435
Self-Healing Properties of Tannic Acid-Functionalized ZIF-8/Reduced Graphene Oxide Nanocomposites for Corrosion Protection
The evolution of composite materials has progressed from basic natural mixtures to advanced engineered systems, fueled by the continuous pursuit of enhanced mechanical strength and durability. A pivotal paradigm shift within this domain is "self-healing" technology a biomimetic approach empowering materials to autonomously detect and repair micro-cracks, thereby mitigating catastrophic failure. While conventional polymeric composites often rely on extrinsic microcapsules, recent research prioritizes "smart" nanocontainers for active corrosion control. Such as, Metal-Organic Frameworks (MOFs) have emerged as state-of-the-art reservoirs due to their high specific surface area and stimuli- responsive release capabilities (Atighi et al., 2025; Lee et al., 2015). Especially, their integration with Reduced Graphene Oxide (rGO) enhances the coating's tortuosity and impermeability (Atighi et al., 2025). In addition, some studies proved that Tannic Acid (TA) can serve as a dual-functional green inhibitor and supramolecular cross-linker. So that, we have envisioned to produce a novel TA functionalized Zeolitic imidazolate frameworks (ZIF-8) /rGO composites and investigate their self- healing properties as anti-corrosive protectors. ZIF-8 nanoparticles were synthesized via a facile aqueous room-temperature precipitation method. Following it, rGO was produced from graphite sources using the Hummers' method (Emiru & Ayele, 2017). The active interface was engineered by functionalizing the ZIF-8/rGO nanohybrids with TA through a functionalization-assisted etching process. The chemical functionalization were rigorously characterized using Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, and UV-Vis Spectroscopy. To evaluate the smart self- healing and stimuli-responsive performance, a pH-dependent release test was conducted in different media and monitored via UV-Vis Spectroscopy. These analyses confirmed the successful synthesis of the nanocomposites, with crystallographic phases and spectral bands showing high concordance, thereby validating the purity and stability of the produced nanocontainers.
- Open Access
- 24 August 2026
- Published by Wiley in Pest Management Science
A formulation‐driven plant‐derived nanoemulsion for root‐knot nematode control in tomato: efficacy across pot and greenhouse conditions
Objective: Nanoemulsion‐based delivery systems offer a promising approach to improve the stability and biological performance of plant‐derived nematicides. This study evaluated a plant‐derived nanoemulsion based on Nerium oleander extract against M. incognita, M. javanica, and M. hapla under controlled pot and commercial greenhouse conditions. Method: The nanoemulsion was evaluated at 2–10 mL L −1 under pot conditions and 6–10 L ha −1 in greenhouse trials, with commercial nematicides used as references. Results: Increasing application rates significantly reduced gall formation across all tested species. At 10 mL L −1 , gall indices were 3.40, 3.10, and 3.00 for M. incognita, M. javanica, and M. hapla, respectively. In greenhouse trials, 10 L ha −1 achieved 85.33% efficacy (gall index 0.97), approaching the commercial botanical reference (89.35%; gall index 0.76). Discussion: The consistent performance across pot and greenhouse experiments indicates that the nanoemulsion maintains its biological activity across experimental scales and supports its potential as a sustainable alternative for integrated nematode management. © 2026 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
- 24 August 2026
- Published by Wiley in Pest Management Science
Open AccessA formulation‐driven plant‐derived nanoemulsion for root‐knot nematode control in tomato: efficacy across pot and greenhouse conditions
Objective: Nanoemulsion‐based delivery systems offer a promising approach to improve the stability and biological performance of plant‐derived nematicides. This study evaluated a plant‐derived nanoemulsion based on Nerium oleander extract against M. incognita, M. javanica, and M. hapla under controlled pot and commercial greenhouse conditions. Method: The nanoemulsion was evaluated at 2–10 mL L −1 under pot conditions and 6–10 L ha −1 in greenhouse trials, with commercial nematicides used as references. Results: Increasing application rates significantly reduced gall formation across all tested species. At 10 mL L −1 , gall indices were 3.40, 3.10, and 3.00 for M. incognita, M. javanica, and M. hapla, respectively. In greenhouse trials, 10 L ha −1 achieved 85.33% efficacy (gall index 0.97), approaching the commercial botanical reference (89.35%; gall index 0.76). Discussion: The consistent performance across pot and greenhouse experiments indicates that the nanoemulsion maintains its biological activity across experimental scales and supports its potential as a sustainable alternative for integrated nematode management. © 2026 The Author(s). Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.
- 3 December 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (49) , 495501
Custom-formulated MWCNT inks for scalable fabrication of flexible screen-printed electrodes
Screen-printing technology enables mass production of disposable electrochemical sensors on diverse substrates, such as ceramic, paper and polymer films. Two fully custom conductive inks—multi‐walled carbon nanotube (MWCNT) and MWCNT/Prussian blue (PB)—together with a lab‐made Ag paste was formulated for scalable printing of flexible screen‐printed electrodes (SPEs) on cellulose and acetate substrates. Prior to printing, the inks were first characterized by scanning electron microscopy/x-ray diffraction/Fourier transform infrared spectroscopy and then optimized for shear-thinning rheology and high conductivity. The resulting SPEs exhibited diffusion‐controlled behavior and good reproducibility. As a practical demonstration, SPEs printed on office paper detected bisphenol A in tap water with a limit of detection (LOD) of 0.084 µ M with a sensitivity of 1.3 µ A · mM −1 · cm −2 . In addition, SPEs with PB showed a linear amperometric response to H 2 O 2 with an LOD of 5.3 µ M ( R 2 of 0.95). These results highlight a low-cost, scalable fabrication strategy for SPEs with applications in environmental monitoring and point-of-care testing, especially in resource-limited settings.
- 3 December 2025
- Published by IOP Publishing in Nanotechnology
- Vol. 36 (49) , 495501
Custom-formulated MWCNT inks for scalable fabrication of flexible screen-printed electrodes
Screen-printing technology enables mass production of disposable electrochemical sensors on diverse substrates, such as ceramic, paper and polymer films. Two fully custom conductive inks—multi‐walled carbon nanotube (MWCNT) and MWCNT/Prussian blue (PB)—together with a lab‐made Ag paste was formulated for scalable printing of flexible screen‐printed electrodes (SPEs) on cellulose and acetate substrates. Prior to printing, the inks were first characterized by scanning electron microscopy/x-ray diffraction/Fourier transform infrared spectroscopy and then optimized for shear-thinning rheology and high conductivity. The resulting SPEs exhibited diffusion‐controlled behavior and good reproducibility. As a practical demonstration, SPEs printed on office paper detected bisphenol A in tap water with a limit of detection (LOD) of 0.084 µ M with a sensitivity of 1.3 µ A · mM −1 · cm −2 . In addition, SPEs with PB showed a linear amperometric response to H 2 O 2 with an LOD of 5.3 µ M ( R 2 of 0.95). These results highlight a low-cost, scalable fabrication strategy for SPEs with applications in environmental monitoring and point-of-care testing, especially in resource-limited settings.
- 9 September 2025
- Published by Izmir UOD
- p. 432-441
Applications of ZnO Nanoparticles in Renewable Energy:A Life Cycle Assessment Approach
This study presents a detailed Life Cycle Assessment (LCA) of nano Zinc Oxide (ZnO) used in solar energy systems, focusing on its environmental impacts throughout its life cycle, from production to disposal. Nano ZnO is increasingly integrated into photovoltaic systems to improve efficiency and performance. However, its introduction raises specific environmental challenges. The analysis encompasses the various stages of nano ZnO’s life cycle, including raw material extraction, manufacturing, application in solar panels, and end-of-life management, employing Life Cycle Assessment (LCA) methodologies to quantify energy consumption, resource depletion, and emissions. The results from the literature review showed that while nano ZnO is the active material in various innovative solar cell technologies, including Quantum-Dot Sensitized Solar Cells, Dye-Sensitized Solar Cells, Perovskite-Sensitized Solar Cells, Organic Solar Cells, Inorganic Solar Cells, and Hybrid Solar Cells, its production does bring about certain environmental issues, including increased energy consumption. It can be said that the synthesis of nano ZnO is the key step that affects its LCA results. Among various synthesis approaches, such as sol-gel, hydrothermal, solvothermal, controlled precipitation, aerosol pyrolysis, and mechanochemical methods, the LCA results indicate significant variations in their environmental impacts. Certain techniques, such as mechanochemical milling, solvothermal synthesis, and aerosol pyrolysis, tend to have higher environmental burdens due to their reliance on toxic solvents, extreme energy demands (e.g., high-temperature calcination and ball milling), and the production of hazardous by-products. Conversely, other approaches, including hydrothermal synthesis, controlled precipitation, and aqueous-based sol-gel processes, demonstrate lower environmental footprints, benefiting from water-based solvents, reduced processing temperatures, biodegradable stabilizing agents, and minimal waste generation. In particular, the integration of more sustainable synthesis methods may help mitigate some of the adverse environmental impacts associated with nano ZnO production, ensuring that its role in the development of solar energy technologies remains environmentally viable. These results highlight the critical need to optimize synthetic routes to comply with green chemistry principles, thereby enhancing the sustainability of nano-enabled solar technologies.
- 9 September 2025
- Published by Izmir UOD
- p. 432-441
Applications of ZnO Nanoparticles in Renewable Energy:A Life Cycle Assessment Approach
This study presents a detailed Life Cycle Assessment (LCA) of nano Zinc Oxide (ZnO) used in solar energy systems, focusing on its environmental impacts throughout its life cycle, from production to disposal. Nano ZnO is increasingly integrated into photovoltaic systems to improve efficiency and performance. However, its introduction raises specific environmental challenges. The analysis encompasses the various stages of nano ZnO’s life cycle, including raw material extraction, manufacturing, application in solar panels, and end-of-life management, employing Life Cycle Assessment (LCA) methodologies to quantify energy consumption, resource depletion, and emissions. The results from the literature review showed that while nano ZnO is the active material in various innovative solar cell technologies, including Quantum-Dot Sensitized Solar Cells, Dye-Sensitized Solar Cells, Perovskite-Sensitized Solar Cells, Organic Solar Cells, Inorganic Solar Cells, and Hybrid Solar Cells, its production does bring about certain environmental issues, including increased energy consumption. It can be said that the synthesis of nano ZnO is the key step that affects its LCA results. Among various synthesis approaches, such as sol-gel, hydrothermal, solvothermal, controlled precipitation, aerosol pyrolysis, and mechanochemical methods, the LCA results indicate significant variations in their environmental impacts. Certain techniques, such as mechanochemical milling, solvothermal synthesis, and aerosol pyrolysis, tend to have higher environmental burdens due to their reliance on toxic solvents, extreme energy demands (e.g., high-temperature calcination and ball milling), and the production of hazardous by-products. Conversely, other approaches, including hydrothermal synthesis, controlled precipitation, and aqueous-based sol-gel processes, demonstrate lower environmental footprints, benefiting from water-based solvents, reduced processing temperatures, biodegradable stabilizing agents, and minimal waste generation. In particular, the integration of more sustainable synthesis methods may help mitigate some of the adverse environmental impacts associated with nano ZnO production, ensuring that its role in the development of solar energy technologies remains environmentally viable. These results highlight the critical need to optimize synthetic routes to comply with green chemistry principles, thereby enhancing the sustainability of nano-enabled solar technologies.
- 9 September 2025
- Published by Izmir UOD
- p. 426-431
Eco-friendly Synthesis of Silver Nanoparticles from Banana Peel Extract for Sustainable Food Preservation
Nanotechnology-based nourishment conservation strategies have obtained increasing consideration caused to their antimicrobial properties and potential to extend the rack life of food and protect it. From these strategies, silver nanoparticles (AgNPs) are known for their capacity to restrain bacterial and oxidation activities, and upgrade the shelf life of perishable food. This considers points to synthesize AgNPs utilizing banana peel extract (G.B.E) as a green synthesis strategy and considers their role in controlling the oxidation and the antibacterial activities on apple slices To obtain the B.P.E., the peels are boiled in distilled water at 60°C for 1 hour, taken after by filtration to get a clear extract. color altered from colorless to dark brown, appearing the decrease of silver particles into nanoparticles. The nanoparticles are then synthesized using two methods: the classical chemical method and the microwave-assisted method, which will be compared later. The characterization of AgNPs will be done using the UV-Vis Spectrophotometry and the Fourier Transform Infrared Spectroscopy (FTIR). And to evaluate the antibacterial and Antioxidation effects, apple slices will be immersed in different concentrations of AgNPs solutions (0.5% and 10%) and stored at room temperature for 5 days. The Visual observation will be performed to analyze the effectiveness of AgNPs on the antibacterial and oxidation activities of both the AgNP-treated apple slices and the untreated control slices. This study highlights the possibility of offering a normal alternative to traditional additives used to preserve nutrients and prevent their waste by using AgNPs synthesized from banana peel extract.
- 9 September 2025
- Published by Izmir UOD
- p. 426-431
Eco-friendly Synthesis of Silver Nanoparticles from Banana Peel Extract for Sustainable Food Preservation
Nanotechnology-based nourishment conservation strategies have obtained increasing consideration caused to their antimicrobial properties and potential to extend the rack life of food and protect it. From these strategies, silver nanoparticles (AgNPs) are known for their capacity to restrain bacterial and oxidation activities, and upgrade the shelf life of perishable food. This considers points to synthesize AgNPs utilizing banana peel extract (G.B.E) as a green synthesis strategy and considers their role in controlling the oxidation and the antibacterial activities on apple slices To obtain the B.P.E., the peels are boiled in distilled water at 60°C for 1 hour, taken after by filtration to get a clear extract. color altered from colorless to dark brown, appearing the decrease of silver particles into nanoparticles. The nanoparticles are then synthesized using two methods: the classical chemical method and the microwave-assisted method, which will be compared later. The characterization of AgNPs will be done using the UV-Vis Spectrophotometry and the Fourier Transform Infrared Spectroscopy (FTIR). And to evaluate the antibacterial and Antioxidation effects, apple slices will be immersed in different concentrations of AgNPs solutions (0.5% and 10%) and stored at room temperature for 5 days. The Visual observation will be performed to analyze the effectiveness of AgNPs on the antibacterial and oxidation activities of both the AgNP-treated apple slices and the untreated control slices. This study highlights the possibility of offering a normal alternative to traditional additives used to preserve nutrients and prevent their waste by using AgNPs synthesized from banana peel extract.
- 9 September 2025
- Published by Izmir UOD
- p. 442-453
Photocatalytic Degradation of Organic Pollutants Using Graphene Quantum Dot-Loaded Sodium Alginate Hydrogels: Synthesis and Characterization
Rapid industrialization and population growth are placing increasing pressure on global clean water resources, resulting in a decline in water quality and associated environmental and health risks. Nanotechnology offers promising and cost-effective solutions for water remediation. Among nanomaterials, graphene quantum dots (GQDs) exhibit strong potential due to their chemical stability, high surface area, and photo luminescent properties. Embedding GQDs within hydrogels enhances their stability, dispersion, and photocatalytic performance. This study aimed to synthesize GQDs from organic waste—specifically waste tea leaves (WTL)—using an environmentally friendly microwave- assisted method. The synthesized GQDs were characterized using UV–Vis spectroscopy, dynamic light scattering (DLS), zeta potential, and scanning electron microscopy (SEM), revealing an absorption peak at 272 nm, particle sizes below 100 nm, high colloidal stability, and spherical morphology. GQDs were embedded in sodium alginate (SA) hydrogels through ionic crosslinking. The resulting GQDs-loaded hydrogels were characterized by UV–Vis spectroscopy, swelling behavior tests, and visual inspection under UV light. Photocatalytic degradation tests against methylene blue (MB) demonstrated effective dye removal under both UV light (25.1%) and dark conditions (17.85%), confirming both photoreactive and passive adsorption capabilities. These results highlight the synergistic effect of GQDs and SA hydrogels and offer a sustainable, dual-function platform for wastewater treatment applications.
- 9 September 2025
- Published by Izmir UOD
- p. 442-453
Photocatalytic Degradation of Organic Pollutants Using Graphene Quantum Dot-Loaded Sodium Alginate Hydrogels: Synthesis and Characterization
Rapid industrialization and population growth are placing increasing pressure on global clean water resources, resulting in a decline in water quality and associated environmental and health risks. Nanotechnology offers promising and cost-effective solutions for water remediation. Among nanomaterials, graphene quantum dots (GQDs) exhibit strong potential due to their chemical stability, high surface area, and photo luminescent properties. Embedding GQDs within hydrogels enhances their stability, dispersion, and photocatalytic performance. This study aimed to synthesize GQDs from organic waste—specifically waste tea leaves (WTL)—using an environmentally friendly microwave- assisted method. The synthesized GQDs were characterized using UV–Vis spectroscopy, dynamic light scattering (DLS), zeta potential, and scanning electron microscopy (SEM), revealing an absorption peak at 272 nm, particle sizes below 100 nm, high colloidal stability, and spherical morphology. GQDs were embedded in sodium alginate (SA) hydrogels through ionic crosslinking. The resulting GQDs-loaded hydrogels were characterized by UV–Vis spectroscopy, swelling behavior tests, and visual inspection under UV light. Photocatalytic degradation tests against methylene blue (MB) demonstrated effective dye removal under both UV light (25.1%) and dark conditions (17.85%), confirming both photoreactive and passive adsorption capabilities. These results highlight the synergistic effect of GQDs and SA hydrogels and offer a sustainable, dual-function platform for wastewater treatment applications.
- 9 September 2025
- Published by Izmir UOD
- p. 498-506
Preparation and Characterization of Carbon Quantum Dots from Salvia rosmarinus (Rosemary) Plant via Hydrothermal Synthesis Method
In this study, Carbon Quantum Dots (CQDs) were synthesized via hydrothermal synthesis (CQDs) from the rosemary (Salvia Rosmarinus) plant as a natural carbon source. Dried and ground rosemary extracts were subjected to hydrothermal reaction at 200 °C for 18 h. CQD solutions were obtained by two purification methods involving high-speed centrifugation and 22 μm injector filter methods. The obtained CQDs were characterized by UV–Vis spectroscopy (UV-Vis) and Fourier transform infrared (FTIR) spectroscopy to analyze their optical and surface chemical properties. UV-Vis analyses revealed that CQDs produced by both purification methods exhibited absorption in the range of 260–320 nm. The lower absorbance values observed after the 22 μm injector filtration process compared to the centrifuged samples showed that the purification method affected the particle size and optical properties. FTIR results proved the presence of hydroxyl (-OH), carboxyl (-COOH), carbonyl (C=O), double bond (C=C) and epoxy (C–O–C) groups on the surface of CQDs. The sharper and more distinct IR bands observed in the CQD samples purified by high-speed centrifugation indicate a more homogeneous and pure structure. As a result of the findings obtained, it is seen that the rosemary plant can be used as an environmentally friendly carbon source by the hydrothermal method, and synthesized CQDs have the potential to be used in biosensors, imaging, and other biomedical applications.
- 9 September 2025
- Published by Izmir UOD
- p. 498-506
Preparation and Characterization of Carbon Quantum Dots from Salvia rosmarinus (Rosemary) Plant via Hydrothermal Synthesis Method
In this study, Carbon Quantum Dots (CQDs) were synthesized via hydrothermal synthesis (CQDs) from the rosemary (Salvia Rosmarinus) plant as a natural carbon source. Dried and ground rosemary extracts were subjected to hydrothermal reaction at 200 °C for 18 h. CQD solutions were obtained by two purification methods involving high-speed centrifugation and 22 μm injector filter methods. The obtained CQDs were characterized by UV–Vis spectroscopy (UV-Vis) and Fourier transform infrared (FTIR) spectroscopy to analyze their optical and surface chemical properties. UV-Vis analyses revealed that CQDs produced by both purification methods exhibited absorption in the range of 260–320 nm. The lower absorbance values observed after the 22 μm injector filtration process compared to the centrifuged samples showed that the purification method affected the particle size and optical properties. FTIR results proved the presence of hydroxyl (-OH), carboxyl (-COOH), carbonyl (C=O), double bond (C=C) and epoxy (C–O–C) groups on the surface of CQDs. The sharper and more distinct IR bands observed in the CQD samples purified by high-speed centrifugation indicate a more homogeneous and pure structure. As a result of the findings obtained, it is seen that the rosemary plant can be used as an environmentally friendly carbon source by the hydrothermal method, and synthesized CQDs have the potential to be used in biosensors, imaging, and other biomedical applications.
- Open Access
- 22 July 2025
- Published by MDPI AG in Preprints.org
Design and Performance of ZIF-8-Based Hybrid Triboelectric Nanogenerators for Marine Energy Harvesting
Metal-organic frameworks (MOFs) have attracted considerable interest for triboelectric applications due to their high surface area, adjustable porosity, and chemical tunability without altering the crystalline framework. In this work, a hybrid-mode triboelectric nanogenerator (TENG) based on zeolitic imidazolate framework-8 (ZIF-8) was developed and characterized. The system integrates both contact-separation and sliding modes to enhance energy conversion efficiency. Structural and morphological analyses confirmed the successful formation and deposition of ZIF-8 onto the device surface. Density Functional Theory (DFT) calculations revealed a net positive surface charge on the ZIF-8 layer, supporting its favorable triboelectric performance. Polystyrene was used as the counter triboelectric layer, and the ZIF-8/polystyrene configuration achieved that under 2 Hz operation, the hybrid TENG system produced a power density of 87,3 mW/m² with a 236 MΩ load, ensuring stable energy delivery. When the load was removed (open-circuit), the power density increased to 803 mW/m², attributed to higher surface charge accumulation due to negligible current flow. These results confirm the system’s effective dual-mode energy harvesting capability. The contact mode primarily contributes to high voltage generation, while the sliding mode enables continuous current output. The TENG device was further adapted for harvesting mechanical energy from water waves by mounting it onto a floating platform, where both vertical and horizontal motions of waves drive the dual-mode system.
- 22 July 2025
- Published by MDPI AG in Preprints.org
Open AccessDesign and Performance of ZIF-8-Based Hybrid Triboelectric Nanogenerators for Marine Energy Harvesting
Metal-organic frameworks (MOFs) have attracted considerable interest for triboelectric applications due to their high surface area, adjustable porosity, and chemical tunability without altering the crystalline framework. In this work, a hybrid-mode triboelectric nanogenerator (TENG) based on zeolitic imidazolate framework-8 (ZIF-8) was developed and characterized. The system integrates both contact-separation and sliding modes to enhance energy conversion efficiency. Structural and morphological analyses confirmed the successful formation and deposition of ZIF-8 onto the device surface. Density Functional Theory (DFT) calculations revealed a net positive surface charge on the ZIF-8 layer, supporting its favorable triboelectric performance. Polystyrene was used as the counter triboelectric layer, and the ZIF-8/polystyrene configuration achieved that under 2 Hz operation, the hybrid TENG system produced a power density of 87,3 mW/m² with a 236 MΩ load, ensuring stable energy delivery. When the load was removed (open-circuit), the power density increased to 803 mW/m², attributed to higher surface charge accumulation due to negligible current flow. These results confirm the system’s effective dual-mode energy harvesting capability. The contact mode primarily contributes to high voltage generation, while the sliding mode enables continuous current output. The TENG device was further adapted for harvesting mechanical energy from water waves by mounting it onto a floating platform, where both vertical and horizontal motions of waves drive the dual-mode system.