Theophilus Maduabuchukwu Ikegwu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Theophilus Maduabuchukwu Ikegwu has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Chika U. Obiora
Department of Food Science and Technology, Faculty of Agriculture, Nnamdi Azikiwe University, Awka, Nigeria
3 shared publicationsChioke A. Okolo
Department of Food Science and Technology, Faculty of Agriculture, Nnamdi Azikiwe University, Awka, Nigeria
3 shared publicationsHelen O. Agu
Department of Food Science and Technology, Faculty of Agriculture, Nnamdi Azikiwe University, Awka, Nigeria
3 shared publicationsClement C. Ezegbe
2 shared publicationsEunice N. Odo
2 shared publicationsAgbo Anthony Ogbonna
Federal Polytechnic
1 shared publication
Latest Publications
- Top Cited Papers
- 8 August 2025
- Published by Springer Nature in Circular Economy and Sustainability
Agri-Waste Valorization: Pathways to Sustainable Bioenergy and Biochemical Innovation
This systematic review examines the potential of agri-waste valorization as a sustainable solution for bioenergy and biochemical production, addressing global energy demands and waste management challenges. Agri-waste, including crop residues, livestock manure, and agro-industrial byproducts, represents a critical yet underutilized resource, with over 5 billion metric tons generated annually. Current disposal practices, such as open-field burning, contribute to environmental degradation, underscoring the urgency of circular bioeconomy strategies. The review evaluates 20 peer-reviewed studies (2015–2025), highlighting thermochemical (pyrolysis, gasification) and biochemical (anaerobic digestion, dark fermentation) technologies for converting heterogeneous feedstocks into biofuels, biogas, and high-value biochemicals. Key findings reveal significant regional disparities: developing nations prioritize decentralized systems for rural energy access, while industrialized regions focus on large-scale biorefineries. Environmental benefits include greenhouse gas (GHG) emission reductions of up to 90% per kWh output when displacing specific fossil fuels (coal), though scalability is hindered by feedstock variability, high pretreatment costs, and policy gaps. Economic viability remains contentious, with profitability dependent on subsidies and market incentives. The review advocates for integrated approaches including combining machine learning-optimized processes, circular design principles, and participatory policy frameworks, to harmonize technological innovation, ecological resilience, and socio-economic equity. By redefining agri-waste as a foundation of sustainable resource systems, this work aligns with sustainable development goals, offering a roadmap for transitioning to climate-resilient, resource-efficient economies.
- 8 August 2025
- Published by Springer Nature in Circular Economy and Sustainability
Top Cited PapersAgri-Waste Valorization: Pathways to Sustainable Bioenergy and Biochemical Innovation
This systematic review examines the potential of agri-waste valorization as a sustainable solution for bioenergy and biochemical production, addressing global energy demands and waste management challenges. Agri-waste, including crop residues, livestock manure, and agro-industrial byproducts, represents a critical yet underutilized resource, with over 5 billion metric tons generated annually. Current disposal practices, such as open-field burning, contribute to environmental degradation, underscoring the urgency of circular bioeconomy strategies. The review evaluates 20 peer-reviewed studies (2015–2025), highlighting thermochemical (pyrolysis, gasification) and biochemical (anaerobic digestion, dark fermentation) technologies for converting heterogeneous feedstocks into biofuels, biogas, and high-value biochemicals. Key findings reveal significant regional disparities: developing nations prioritize decentralized systems for rural energy access, while industrialized regions focus on large-scale biorefineries. Environmental benefits include greenhouse gas (GHG) emission reductions of up to 90% per kWh output when displacing specific fossil fuels (coal), though scalability is hindered by feedstock variability, high pretreatment costs, and policy gaps. Economic viability remains contentious, with profitability dependent on subsidies and market incentives. The review advocates for integrated approaches including combining machine learning-optimized processes, circular design principles, and participatory policy frameworks, to harmonize technological innovation, ecological resilience, and socio-economic equity. By redefining agri-waste as a foundation of sustainable resource systems, this work aligns with sustainable development goals, offering a roadmap for transitioning to climate-resilient, resource-efficient economies.
- Open Access
- 3 July 2025
- Published by Elsevier in Applied Food Research
- Vol. 5 (2)
Effect of dough thickness and baking temperatures on the proximate composition of optimized cookies from wheat-white yam flour using response surface methodology
- 3 July 2025
- Published by Elsevier in Applied Food Research
- Vol. 5 (2)
Open AccessEffect of dough thickness and baking temperatures on the proximate composition of optimized cookies from wheat-white yam flour using response surface methodology
- 2 May 2025
- Published by Sciencedomain International
- Vol. 4 (2) , 551-560
Development and Quality Assessment of Extruded Snack Products from Brewers’ Spent Grain, wheat Flour, and Soy Protein Isolate Blends
- 2 May 2025
- Published by Sciencedomain International
- Vol. 4 (2) , 551-560
Development and Quality Assessment of Extruded Snack Products from Brewers’ Spent Grain, wheat Flour, and Soy Protein Isolate Blends
- Open Access
- 20 January 2025
- Published by CARI Journals Limited in Journal of Food Sciences
- Vol. 7 (1) , 57-70
Comparative Study of the Physicochemical and Anti-Nutritional Properties of Branded and Laboratory-Produced Tomato Pastes with Added Hydrocolloid
Purpose: This study compared laboratory-produced tomato pastes with added pectin (0.31-0.94%) to commercially available brands, assessing physicochemical and antinutritional properties. Methodology: A completely randomized design was employed, and samples were analyzed for moisture, protein, fat, fiber, ash, carbohydrate content, pH, total soluble solids, starch components, viscosity, lycopene, β-carotene, vitamin C, phytate, glycoside, saponin, and tannin. Findings: Moisture ranged from 66.06-72.50%, with branded pastes exhibiting higher moisture than pectin-added samples. The crude protein, fat, crude fibre and ash content of the samples ranged from 4.01 to 4.37%, 0.14 to 0.25%, 4.83 to 6.81%, and 3.26 to 3.84%, respectively. The carbohydrate content ranged from 12.98 to 18.93%. The total soluble solids, amylose, amylopectin, total starch and the dynamic viscosities of the tomato pastes differed significantly (p<0.05) and ranged between 81.56-89.28%, 0.14-0.64%, 99.37-99.86%, 6.54-7.46% and 28.45-45.16%, respectively. However, the laboratory pastes without pectin closely resembled branded products. Significant differences (p<0.05) were observed in pH (4.22-4.81), total soluble solids (81.56-89.28%), starch components, viscosity (28.45-45.16%), and nutritional compounds. Lycopene ranged from 14.32-15.55 µg/100g, β-carotene from 645.7-685.22 µg/100g, and vitamin C from 45.34-48.88 mg/100g. Antinutritional factors varied, with phytate between 0.22-0.35 mg/100g. Pectin addition increased viscosity, and all samples met quality standards. Unique Contributions to Theory, Practice, and Policy: The study advances food chemistry by showing how pectin affects tomato paste's viscosity, starch composition, and nutrient retention. It supports theories on hydrocolloid behavior in moist foods and highlights how processing and fortification impact antinutritional factors (phytates, tannins, saponins, glycosides) and starch modification. It offers a practical guide for small and medium food processors to improve tomato paste quality using optimal pectin levels (0.31–0.94%) without additives. The comparison with commercial brands provides benchmarks for enhancing local products, supporting affordable, high-quality alternatives in tomato-growing areas. Findings support regulatory standards for viscosity, nutrient density, and antinutritional content in tomato products. They inform food labeling and fortification strategies and promote policies that encourage local production and reduce dependence on imports.
- 20 January 2025
- Published by CARI Journals Limited in Journal of Food Sciences
- Vol. 7 (1) , 57-70
Open AccessComparative Study of the Physicochemical and Anti-Nutritional Properties of Branded and Laboratory-Produced Tomato Pastes with Added Hydrocolloid
Purpose: This study compared laboratory-produced tomato pastes with added pectin (0.31-0.94%) to commercially available brands, assessing physicochemical and antinutritional properties. Methodology: A completely randomized design was employed, and samples were analyzed for moisture, protein, fat, fiber, ash, carbohydrate content, pH, total soluble solids, starch components, viscosity, lycopene, β-carotene, vitamin C, phytate, glycoside, saponin, and tannin. Findings: Moisture ranged from 66.06-72.50%, with branded pastes exhibiting higher moisture than pectin-added samples. The crude protein, fat, crude fibre and ash content of the samples ranged from 4.01 to 4.37%, 0.14 to 0.25%, 4.83 to 6.81%, and 3.26 to 3.84%, respectively. The carbohydrate content ranged from 12.98 to 18.93%. The total soluble solids, amylose, amylopectin, total starch and the dynamic viscosities of the tomato pastes differed significantly (p<0.05) and ranged between 81.56-89.28%, 0.14-0.64%, 99.37-99.86%, 6.54-7.46% and 28.45-45.16%, respectively. However, the laboratory pastes without pectin closely resembled branded products. Significant differences (p<0.05) were observed in pH (4.22-4.81), total soluble solids (81.56-89.28%), starch components, viscosity (28.45-45.16%), and nutritional compounds. Lycopene ranged from 14.32-15.55 µg/100g, β-carotene from 645.7-685.22 µg/100g, and vitamin C from 45.34-48.88 mg/100g. Antinutritional factors varied, with phytate between 0.22-0.35 mg/100g. Pectin addition increased viscosity, and all samples met quality standards. Unique Contributions to Theory, Practice, and Policy: The study advances food chemistry by showing how pectin affects tomato paste's viscosity, starch composition, and nutrient retention. It supports theories on hydrocolloid behavior in moist foods and highlights how processing and fortification impact antinutritional factors (phytates, tannins, saponins, glycosides) and starch modification. It offers a practical guide for small and medium food processors to improve tomato paste quality using optimal pectin levels (0.31–0.94%) without additives. The comparison with commercial brands provides benchmarks for enhancing local products, supporting affordable, high-quality alternatives in tomato-growing areas. Findings support regulatory standards for viscosity, nutrient density, and antinutritional content in tomato products. They inform food labeling and fortification strategies and promote policies that encourage local production and reduce dependence on imports.
- 5 October 2024
- Published by Integrity Mega Research Publishers in Research Journal of Food Science and Nutrition
Production and quality evaluation of soy-tigernut milk
This study was conducted to determine the proximate, minerals, vitamins, functional properties, phytochemicals and microbial growth of soy-tiger nut milk. Dried tiger nut tubers and soybean seeds were sorted, washed, soaked, dehulled (soybeans), milled and filtered to obtain fresh milk. The results obtained showed that there was a significant difference (p<0.05) in the proximate composition of samples. The ash, moisture, fibre, protein, and carbohydrate content ranged from 1.30% - 2.93%, 73.00% - 81.33%, 0.02% - 1.83%, 2.43% - 3.93%, 5.06% - 8.48%, 6.34% - 16.93%, respectively with PAP having high carbohydrate content. The mineral composition comprises calcium, magnesium, iron and phosphorous content with FAD having the highest calcium and phosphorous content. The vitamin composition includes vitamins A, B2, C and B6. The functional composition comprises of water absorption capacity and solubility index with PAP having the highest water absorption capacity. The phytochemicals composition ranges from 6.23 - 8.50 and 11.60- 12.96 mg/100g for flavonoids and phenols and ZAK has the highest phenols. In microbial load, the bacteria organisms isolated were Bacillus spp, Microccoccus spp, Klebsiella spp, Staphylococcus spp, Corynebacterium spp and Pseudomonas spp and the fungi isolated were Candida spp, Fusarium spp, Penicillium and Rhizopus spp and Saccharomyces cerevisiea.
- 5 October 2024
- Published by Integrity Mega Research Publishers in Research Journal of Food Science and Nutrition
Production and quality evaluation of soy-tigernut milk
This study was conducted to determine the proximate, minerals, vitamins, functional properties, phytochemicals and microbial growth of soy-tiger nut milk. Dried tiger nut tubers and soybean seeds were sorted, washed, soaked, dehulled (soybeans), milled and filtered to obtain fresh milk. The results obtained showed that there was a significant difference (p<0.05) in the proximate composition of samples. The ash, moisture, fibre, protein, and carbohydrate content ranged from 1.30% - 2.93%, 73.00% - 81.33%, 0.02% - 1.83%, 2.43% - 3.93%, 5.06% - 8.48%, 6.34% - 16.93%, respectively with PAP having high carbohydrate content. The mineral composition comprises calcium, magnesium, iron and phosphorous content with FAD having the highest calcium and phosphorous content. The vitamin composition includes vitamins A, B2, C and B6. The functional composition comprises of water absorption capacity and solubility index with PAP having the highest water absorption capacity. The phytochemicals composition ranges from 6.23 - 8.50 and 11.60- 12.96 mg/100g for flavonoids and phenols and ZAK has the highest phenols. In microbial load, the bacteria organisms isolated were Bacillus spp, Microccoccus spp, Klebsiella spp, Staphylococcus spp, Corynebacterium spp and Pseudomonas spp and the fungi isolated were Candida spp, Fusarium spp, Penicillium and Rhizopus spp and Saccharomyces cerevisiea.
- 25 March 2023
- Published by IK Press in Journal of Advances in Food Science & Technology
- p. 1-14
Nutritional, Phytochemical and Sensory Properties of Herbal Tea: Cymbopogon citratus, Moringa oleifera and Zingiber officinale
The research investigated the effect of drying temperature and time; and the proportion of different samples on the physicochemical and sensory properties of herbal tea from lemongrass, moringa leaf and ginger. The samples were analyzed using standard methods. The results obtained showed that there were significant (P<0.05) differences in the proximate composition (%) of the samples (with fats, protein, carbohydrate, ash, moisture, and fibre contents ranged from 0.01-4.01, 3.90-6.67, 67.59-78.91, 2.02-6.90, 3.14-6.01 and 8.89-12.02, respectively. The phytochemical analyses showed significant (P<0.05) variations that could be attributed to the effect of temperature of drying, duration and proportion of ginger, moringa and lemon grass leaves. The oxalates ranged from 0.01-3.89 mg/g, alkaloids (2.89-7.89 mg/g), saponin (0.22-5.47 mg/g), phytates (0.08-6.67 mg/g), phenols (0.01-4.01 mg/g, flavonoids (0.06-16.34 mg/g, steroids (0.33-7.83 mg/g and Terpenoids (0.02-7.98 mg/g). It was observed that the vitamins (mg/g) and minerals (mg/g) likewise showed significant (P<0.05) variations with vtamins A, B1, C and D ranging from 7.57-12.05, 1.78-11.45, 2.77-11.91 and 4.32-12.11, respectively while the magnesium, calcium, manganese, potassium and sodium ranged from 3.64-8.89, 2.36-8.20, 0.00-0.04, 3.22-12.33 and 6.13-10.12, respectively. The samples with higher content of the lemon grass were observed to contain more flavonoids than others but increased concentration of the moringa and reduced the flavonoids content.
- 25 March 2023
- Published by IK Press in Journal of Advances in Food Science & Technology
- p. 1-14
Nutritional, Phytochemical and Sensory Properties of Herbal Tea: Cymbopogon citratus, Moringa oleifera and Zingiber officinale
The research investigated the effect of drying temperature and time; and the proportion of different samples on the physicochemical and sensory properties of herbal tea from lemongrass, moringa leaf and ginger. The samples were analyzed using standard methods. The results obtained showed that there were significant (P<0.05) differences in the proximate composition (%) of the samples (with fats, protein, carbohydrate, ash, moisture, and fibre contents ranged from 0.01-4.01, 3.90-6.67, 67.59-78.91, 2.02-6.90, 3.14-6.01 and 8.89-12.02, respectively. The phytochemical analyses showed significant (P<0.05) variations that could be attributed to the effect of temperature of drying, duration and proportion of ginger, moringa and lemon grass leaves. The oxalates ranged from 0.01-3.89 mg/g, alkaloids (2.89-7.89 mg/g), saponin (0.22-5.47 mg/g), phytates (0.08-6.67 mg/g), phenols (0.01-4.01 mg/g, flavonoids (0.06-16.34 mg/g, steroids (0.33-7.83 mg/g and Terpenoids (0.02-7.98 mg/g). It was observed that the vitamins (mg/g) and minerals (mg/g) likewise showed significant (P<0.05) variations with vtamins A, B1, C and D ranging from 7.57-12.05, 1.78-11.45, 2.77-11.91 and 4.32-12.11, respectively while the magnesium, calcium, manganese, potassium and sodium ranged from 3.64-8.89, 2.36-8.20, 0.00-0.04, 3.22-12.33 and 6.13-10.12, respectively. The samples with higher content of the lemon grass were observed to contain more flavonoids than others but increased concentration of the moringa and reduced the flavonoids content.
- 2 March 2023
- Published by IK Press in Journal of Advances in Food Science & Technology
- p. 46-74
Food Security in Emerging Global Situations-Functional Foods and Food Biotechnology Approaches: A Review
People having access to physical, social and economic food that is sufficient, safe and nutritious to meet their dietary needs and food preferences, for an active and healthy life, could be a mirage without the involvement of local communities, in global effort to mitigate malnutrition. World leaders have identified the lacuna in the drive for food security and therefore, seek a sustainable approach through which biotechnology and functional food technology could be tailored to forestall food insecurity, especially in emerging global situations. Consequently, researchers in food microbiology, enzyme biotechnology, among other disciplines are making concerted effort to provide solutions to some emerging world problems such as banditry, wars, climate change, internal displacement, migration, among others. Emphasis on the role of functional foods and biotechnology for sustainable food security should be paramount on the global scale as championed by United Nations Organization (UNO), Food and Agricultural Organization (FAO), World Health Organization/World Bank (WHO/WB) and World Food Programme on Malnutrition. Functional food components such as biotin, carotenoids, lycopene, monosaturated and polyunsaturated fatty acids, among others could be tailored to reduce the incidences coronary heart diseases, diabetes and free radicals in the body for improved nutrition, while nutritional education, alongside global support and empowerment initiatives for sustainability in agricultural biotechnological approaches would be highly imperative. It is therefore imperative for the global support agencies to reduce malnutrition to emphasize food functionality such as the role of carotenoids, fatty acids, lycopene, vitamins, minerals, biotin, fibre, etc in combating food insecurity through nutritional education, and in farming operations. It is in doing so that the role of food biotechnology would impact positively on the affected population, whereby foods are not just in abundance but also have the ability and capacity to provide the needed food ingredients to functionally prevent cardiovascular diseases, diabetes, neutralize free radicals and prevent antioxidant activity in the body.
- 2 March 2023
- Published by IK Press in Journal of Advances in Food Science & Technology
- p. 46-74
Food Security in Emerging Global Situations-Functional Foods and Food Biotechnology Approaches: A Review
People having access to physical, social and economic food that is sufficient, safe and nutritious to meet their dietary needs and food preferences, for an active and healthy life, could be a mirage without the involvement of local communities, in global effort to mitigate malnutrition. World leaders have identified the lacuna in the drive for food security and therefore, seek a sustainable approach through which biotechnology and functional food technology could be tailored to forestall food insecurity, especially in emerging global situations. Consequently, researchers in food microbiology, enzyme biotechnology, among other disciplines are making concerted effort to provide solutions to some emerging world problems such as banditry, wars, climate change, internal displacement, migration, among others. Emphasis on the role of functional foods and biotechnology for sustainable food security should be paramount on the global scale as championed by United Nations Organization (UNO), Food and Agricultural Organization (FAO), World Health Organization/World Bank (WHO/WB) and World Food Programme on Malnutrition. Functional food components such as biotin, carotenoids, lycopene, monosaturated and polyunsaturated fatty acids, among others could be tailored to reduce the incidences coronary heart diseases, diabetes and free radicals in the body for improved nutrition, while nutritional education, alongside global support and empowerment initiatives for sustainability in agricultural biotechnological approaches would be highly imperative. It is therefore imperative for the global support agencies to reduce malnutrition to emphasize food functionality such as the role of carotenoids, fatty acids, lycopene, vitamins, minerals, biotin, fibre, etc in combating food insecurity through nutritional education, and in farming operations. It is in doing so that the role of food biotechnology would impact positively on the affected population, whereby foods are not just in abundance but also have the ability and capacity to provide the needed food ingredients to functionally prevent cardiovascular diseases, diabetes, neutralize free radicals and prevent antioxidant activity in the body.
- Open Access
- 24 December 2022
- Published by IntechOpen
Processing of Oilseeds in the Tropics: Prospects and Challenges
Oilseeds have been cultivated from antiquity with increasing demand in agricultural industries world trade. Many economies such as Malaysia depend largely on oilseed crops which are grown primarily for the edible oil production; and for additional meal fraction arising from the seed. The meal is rich in protein and used for animal feed. Recent developments in research have posited oilseeds as a viable source for the production of biodiesel. In the tropics, most of the oilseeds are underutilized; and interest in its mass production and utilization are lacking. Some other seed such as neem seeds, pawpaw seeds, Jatropha curcas L. seeds, etc. have not been put to use in tropical countries leading to subsistence production and their applications in other areas. The oilseed crops could be used either for human, animal or for industrial purposes. There is need to increase the volume of production of these oils in tropical countries through improved quality farming techniques that would encourage breeding in other to meet up with increasing demands. Notably, there are many conventional methods that have been used to increase oilseeds yields. However, the adoption of each technology improvement should be sustainable, while other unknown oilseeds should be discovered for increased utilization.
- 24 December 2022
- Published by IntechOpen
Open AccessProcessing of Oilseeds in the Tropics: Prospects and Challenges
Oilseeds have been cultivated from antiquity with increasing demand in agricultural industries world trade. Many economies such as Malaysia depend largely on oilseed crops which are grown primarily for the edible oil production; and for additional meal fraction arising from the seed. The meal is rich in protein and used for animal feed. Recent developments in research have posited oilseeds as a viable source for the production of biodiesel. In the tropics, most of the oilseeds are underutilized; and interest in its mass production and utilization are lacking. Some other seed such as neem seeds, pawpaw seeds, Jatropha curcas L. seeds, etc. have not been put to use in tropical countries leading to subsistence production and their applications in other areas. The oilseed crops could be used either for human, animal or for industrial purposes. There is need to increase the volume of production of these oils in tropical countries through improved quality farming techniques that would encourage breeding in other to meet up with increasing demands. Notably, there are many conventional methods that have been used to increase oilseeds yields. However, the adoption of each technology improvement should be sustainable, while other unknown oilseeds should be discovered for increased utilization.
- 16 May 2022
- Published by Sciencedomain International in Asian Food Science Journal
- p. 35-52
Effect of Thermal Processing Conditions on the Physicochemical and Moisture-Sorption Characteristics of Two Cocoyam (Colocasia esculenta) Varieties
Two cocoyam varieties (Colocasia esculenta) known as taro grown in Cross-River State and Bendel were subjected to different processing conditions (boiling and drying) and the effect of boiling temperature, boiling time and drying temperatures were investigated. They were processed into flour using standard methods, packaged in low-density polyethylene bags and kept in the laboratory for analysis. The results obtained showed that crude fat, crude protein, ash, moisture, crude fibre and carbohydrate contents ranged from 0.42-0.92%, 6.03-9.01%, 2.13-3.90%, 5.20-12.07%, 0.43-0.77% and 73.32-81.73%, respectively. The anti-nutrients contents of the samples showed that oxalate ranged from 0.01-0.99 mg/g, alkaloids (0.12-0.73 mg/g), flavonoids (0.00-0.83 mg/g), phytate (0.01-1.90 mg/g), saponin (0.00-0.83 mg/g) and tannin (0.00-0.01 mg/g). The investigation revealed that there were significant (p2, 7.87-20.87 mins, 8.00-9.97 N/m2, 15.10-17.90 N/m2, 6.0-7.5 N/m2 and 2.3-3.8 N/m2. The research discovered that sample with less pasting temperatures and high peak viscosity had better thickening effect as seen in sample of Cross River Cocoyam. The moisture sorption isotherms had sigmoid-shaped profiles for all of the three temperatures. The hysteresis effect at the three temperatures was distinctly expressed. The increasing temperatures resulted in less hysteresis effect on taro flour which meant the adsorption and desorption curves were closer.
- 16 May 2022
- Published by Sciencedomain International in Asian Food Science Journal
- p. 35-52
Effect of Thermal Processing Conditions on the Physicochemical and Moisture-Sorption Characteristics of Two Cocoyam (Colocasia esculenta) Varieties
Two cocoyam varieties (Colocasia esculenta) known as taro grown in Cross-River State and Bendel were subjected to different processing conditions (boiling and drying) and the effect of boiling temperature, boiling time and drying temperatures were investigated. They were processed into flour using standard methods, packaged in low-density polyethylene bags and kept in the laboratory for analysis. The results obtained showed that crude fat, crude protein, ash, moisture, crude fibre and carbohydrate contents ranged from 0.42-0.92%, 6.03-9.01%, 2.13-3.90%, 5.20-12.07%, 0.43-0.77% and 73.32-81.73%, respectively. The anti-nutrients contents of the samples showed that oxalate ranged from 0.01-0.99 mg/g, alkaloids (0.12-0.73 mg/g), flavonoids (0.00-0.83 mg/g), phytate (0.01-1.90 mg/g), saponin (0.00-0.83 mg/g) and tannin (0.00-0.01 mg/g). The investigation revealed that there were significant (p2, 7.87-20.87 mins, 8.00-9.97 N/m2, 15.10-17.90 N/m2, 6.0-7.5 N/m2 and 2.3-3.8 N/m2. The research discovered that sample with less pasting temperatures and high peak viscosity had better thickening effect as seen in sample of Cross River Cocoyam. The moisture sorption isotherms had sigmoid-shaped profiles for all of the three temperatures. The hysteresis effect at the three temperatures was distinctly expressed. The increasing temperatures resulted in less hysteresis effect on taro flour which meant the adsorption and desorption curves were closer.
- Open Access
- 28 April 2022
- Published by IntechOpen
Postharvest Preservation Technology of Cereals and Legumes
Cereals and legumes are prone to perishability and have very short shelf-life if not given proper treatment. During different handling and marketing operations, there is a huge postharvest loss of agricultural produce. The qualitative and quantitative losses incurred in cereals and legumes commodities between harvest and consumption are huge. Qualitative losses such as loss inedibility, nutritional quality, calorific value, and consumer acceptability of fresh produce are much more difficult to assess than are quantitative losses. The major cause of postharvest loss (PHL) is the availability of poor infrastructure for postharvest technology (PHT) and processing of commodities. These losses can only be minimized by proper handling, marketing, and processing of the agricultural commodities; as well as the use of modern preservation technologies such as irradiation, radio frequency heating, etc. The sufficient knowledge of pre-and post-harvest preservation technologies and the provision of adequate and sufficient storage facilities for cereals and legumes handling and distribution would help to mitigate the incidence of postharvest deterioration and therefore improve the availability of cereals and legumes in the market and subsequent reduction in malnutrition for increased food security. Postharvest preservation technology of cereals and legumes is very fundamental in reducing postharvest losses and increasing food security.
- 28 April 2022
- Published by IntechOpen
Open AccessPostharvest Preservation Technology of Cereals and Legumes
Cereals and legumes are prone to perishability and have very short shelf-life if not given proper treatment. During different handling and marketing operations, there is a huge postharvest loss of agricultural produce. The qualitative and quantitative losses incurred in cereals and legumes commodities between harvest and consumption are huge. Qualitative losses such as loss inedibility, nutritional quality, calorific value, and consumer acceptability of fresh produce are much more difficult to assess than are quantitative losses. The major cause of postharvest loss (PHL) is the availability of poor infrastructure for postharvest technology (PHT) and processing of commodities. These losses can only be minimized by proper handling, marketing, and processing of the agricultural commodities; as well as the use of modern preservation technologies such as irradiation, radio frequency heating, etc. The sufficient knowledge of pre-and post-harvest preservation technologies and the provision of adequate and sufficient storage facilities for cereals and legumes handling and distribution would help to mitigate the incidence of postharvest deterioration and therefore improve the availability of cereals and legumes in the market and subsequent reduction in malnutrition for increased food security. Postharvest preservation technology of cereals and legumes is very fundamental in reducing postharvest losses and increasing food security.