DPDilruba A. Popy

Dilruba A. Popy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dilruba A. Popy has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimized Photoemission from Organic Molecules in 2D Layered Halide Perovskites

    by Muhammad S. Muhammad, Dilruba A. Popy, Hamza Shoukat, John M. Lane, Neeraj Rai, Vojtěch Vaněček, Zdeněk Remeš, Romana Kučerková, Vladimir Babin, Chenjia Mi, et al.

    In recent years, hybrid organic-inorganic metal halides have been at the forefront of materials research. Typically, the functional (e.g., optoelectronic) properties of hybrid halides are derived from the inorganic structural part, whereas the organic structural units can add extra advantages in terms of stability, rigidity, and processability. Here, we report the design, synthesis, and characterization of two new hybrid materials in which the outstanding photophysical properties originate from the organic structural part. The new compounds, (C15H16N)2CdCl4 and ((Br)C15H15N)2CdCl4, have 2D layered Ruddlesden-Popper-type perovskite structures. These hybrids are blue-white light emitters just like their corresponding pure organic salts, but with much improved emission efficiencies. Optical spectroscopy and density functional theory (DFT) studies confirm that photoemission comes from the trans-stilbene organic cations. The photoluminescence quantum yield (PLQY) values of these new materials are among the highest known, 50.83% and 26.60% for (C15H16N)2CdCl4 and ((Br)C15H15N)2CdCl4, respectively. This is up to a 5-fold increase as compared to the light emission efficiency of the precursor salt C15H16NCl (PLQY of 10.33%). Alongside their outstanding optical properties, their environmental and thermal stability allow their consideration for potential practical applications such as radiation detection. This work shows that hybrid metal halides can be compositionally and structurally engineered to have highly efficient photoemission originating from the organic components for fast scintillation applications.


  • Open Access

    Structural Diversity and Tunable Emission in Hybrid Organic–Inorganic Copper(I) Bromides

    by Tamanna Pinky, Kanika Parashar, Dilruba A. Popy, Kowsik Ghosh, Aleksandra D. Valueva, Mario F. Borunda, Svilen Bobev, Bayram Saparov

    Recently, hybrid organic-inorganic copper(I) metal halides have attracted global attention due to their intriguing optical properties and low-cost solution processability. In this work, we report three hybrid organic-inorganic copper(I) bromides, [TMPA]2[Cu2Br4], [TMPA]4[Cu6Br10], and [TMPA]2[Cu4Br6], synthesized through a slow evaporation method using trimethylphenylammonium (TMPA+) as the organic cation. By precise control of the CuBr and TMPABr precursors, different copper halide [Cu2Br4]2-, [Cu6Br10]4-, and [Cu4Br6]2- structural units can be obtained. [TMPA]2[Cu2Br4], [TMPA]4[Cu6Br10], and [TMPA]2[Cu4Br6] demonstrate distinct blue, orange, and greenish-yellow light emission, respectively. The first two compounds have zero-dimensional (0D) crystal structures in centrosymmetric triclinic space group P-1 and monoclinic space group P21/n. In contrast, [TMPA]2[Cu4Br6] features a unique one-dimensional (1D) structure and crystallizes in the centrosymmetric monoclinic space group P21/c. Consequently, the observed greenish-yellow emission of [TMPA]2[Cu4Br6] is also unique, in contrast to the typical orange-red emission of 0D [Cu4Br6]-based compounds. This work provides insights into the design of copper halide light emitters and emphasizes the influence of structural dimensionality on photoluminescence. The tunable optical properties suggest the potential of these materials for multicolor photopatterning, information encryption, and anticounterfeiting applications.


  • Open Access

    Efficient Mn2+ Doping in Non-Stoichiometric Cesium Lead Bromide Perovskite Quantum Dots

    by Lamia Hidayatova, Chenjia Mi, Novruz G. Akhmedov, Yuan Liu, Arjumand K. Shafiq, Hadi Afshari, Nishya Mohamed-Raseek, Dilruba A. Popy, Sisi Xiang, Yi-Chen Chen, et al.

    Doping magnetic transition metal ions (e.g., Mn2+) into colloidal quantum dots endows novel optical and magnetic properties to the host materials. CsPbBr3 quantum dots (QDs) are emerging light-emitting materials with high structural and chemical flexibility in the visible spectral regime. However, efficiently doping Mn2+ ions in CsPbBr3 QDs remains challenging, especially when size confinement and ensemble uniformity are needed for understanding the underexplored exciton-dopant exchange interaction. Here, we introduce a doping mechanism based on electrostatic surface Mn2+ adsorption that enables efficient Mn2+ incorporation in strongly confined CsPbBr3 QDs. The resultant QDs are found to have a Cs-deficient stoichiometry compared to their undoped counterparts. A redox reaction-based purification method was developed to remove Mn2+ cations that are tightly adsorbed on the surface to determine the concentration of lattice-incorporated Mn2+. Our synthesis enables a Mn2+ doping/alloying concentration of up to ∼44% with a Mn2+ photoluminescence efficiency exceeding 90%. This allows for the determination of the intrinsic exciton-to-dopant energy transfer rate.


  • Contracted, Not Converted: Photoluminescence Thermochromism in Ultrabright Pure Blue Emissive Hybrid Copper(I) Halide

    by Dilruba A. Popy, Lauren M. Loftus, Jie Jiang, Jeffrey D. Einkauf, Suryaveer Kapoor, Michael A. McGuire, Ruth Pachter, Bayram Saparov

    Thermochromic luminescent materials are promising for applications such as sensors or display technologies. Understanding the mechanism of thermochromic luminescence in these materials plays an important role for their targeted applications. Here, a 0D copper(I) halide (TMP) 2 CuBr 3 and 1D (TMP)Ag 2 Br 3 (TMP = tetramethylphosphonium) are reported. While (TMP)Ag 2 Br 3 is a weak light emitter, (TMP) 2 CuBr 3 demonstrates ultrabright pure blue emission with photoluminescence (PL) quantum yield exceeding 90% within the temperature range 300–80 K. The emission in (TMP) 2 CuBr 3 is attributed to the radiative recombination of self‐trapped excitons (STEs) that arise localized on [CuBr 3 ] 2− anions. (TMP) 2 CuBr 3 demonstrates excitation‐selective PL thermochromism at low temperatures. In the literature, the origin of multiple STEs is often unclear in luminescent metal halides. Here, a detailed temperature‐dependent spectroscopic and structural analysis suggests that the PL thermochromism in (TMP) 2 CuBr 3 is associated with the appearance of a second STE state. The appearance of second STE is expected to have a structural origin, and it may be associated with the observed anomaly in thermal contraction near 200 K. The distinct PL features of melt‐processible (TMP) 2 CuBr 3 coupled with its remarkable photo‐ and thermal stability allow its consideration for practical optical applications, including temperature sensing.


  • “This or that” – light emission from hybrid organic–inorganic vs. coordination Cu( i ) halides

    by Dilruba A. Popy, Bayram Saparov

    This review clarifies the confusion regarding similarities and differences between the photoluminescent hybrid organic–inorganic and coordination Cu( i ) halides, including their crystal and electronic structures, and optical properties.


  • Open Access

    Stimuli‐responsive photoluminescent copper(I) halides for scintillation, anticounterfeiting, and light‐emitting diode applications

    by Dilruba A. Popy, Yashpal Singh, Yauhen Tratsiak, Abby M. Cardoza, John M. Lane, Luis Stand, Mariya Zhuravleva, Neeraj Rai, Bayram Saparov

    Highly sensitive stimuli‐responsive luminescent materials are crucial for applications in optical sensing, security, and anticounterfeiting. Here, we report two zero‐dimensional (0D) copper(I) halides, (TEP)2Cu2Br4, (TEP)2Cu4Br6, and 1D (TEP)3Ag6Br9, which are comprised of isolated [Cu2Br4]2−, [Cu4Br6]2−, and [Ag6Br9]3− polyanions, respectively, separated by TEP+ (tetraethylphosphonium [TEP]) cations. (TEP)2Cu2Br4 and (TEP)2Cu4Br6 demonstrate greenish‐white and orange‐red emissions, respectively, with near unity photoluminescence quantum yields, while (TEP)3Ag6Br9 is a poor light emitter. Optical spectroscopy measurements and density‐functional theory calculations reveal that photoemissions of these compounds originate from self‐trapped excitons due to the excited‐state distortions in the copper(I) halide units. Crystals of Cu(I) halides are radioluminescence active at room temperature under both X‐ and γ‐rays exposure. The light yields up to 15,800 ph/MeV under 662 keV γ‐rays of 137Cs suggesting their potential for scintillation applications. Remarkably, (TEP)2Cu2Br4 and (TEP)2Cu4Br6 are interconvertible through chemical stimuli or reverse crystallization. In addition, both compounds demonstrate luminescence on‐off switching upon thermal stimuli. The sensitivity of (TEP)2Cu2Br4 and (TEP)2Cu4Br6 to the chemical and thermal stimuli coupled with their ultrabright emission allows their consideration for applications such as solid‐state lighting, sensing, information storage, and anticounterfeiting.


  • Open Access

    Stimuli-responsive Photoluminescent Copper(I) Halides for Scintillation, Anticounterfeiting and LED Applications

    by Bayram Saparov, Dilruba A. Popy, Yashpal Singh, Yauhen Tratsiak, Abby M. Cardoza, John M. Lane, Luis Stand, Mariya Zhuravleva, Neeraj Rai

    Highly sensitive stimuli-responsive multifunctional luminescent materials are crucial for applications in optical sensing, high-level security, and anticounterfeiting. Here, we report two zero-dimensional (0D) hybrid copper(I) halides, (TEP) 2 Cu 2 Br 4 and (TEP) 2 Cu 4 Br 6 , which are comprised of isolated [Cu 2 Br 4 ] 2- and [Cu 4 Br 6 ] 2- inorganic cluster units, respectively, separated by TEP + (TEP = tetraethylphosphonium) cations. (TEP) 2 Cu 2 Br 4 and (TEP) 2 Cu 4 Br 6 demonstrate ultrabright greenish-white and orange-red emissions, respectively, with near unity photoluminescence quantum yields. Optical spectroscopy measurements and density-functional theory (DFT) calculations reveal that photoemissions of these compounds originate from the formation of self-trapped excitons (STEs) due to the excited-state distortions in the copper(I) halide units. Single crystals of both compounds are radioluminescence (RL) active at room temperature under both X- and γ-rays exposure. The excellent energy resolution values and light yields up to 15,800 ph/MeV under 662 keV γ-rays of 137 Cs suggest their potential for scintillation applications. Remarkably, (TEP) 2 Cu 2 Br 4 and (TEP) 2 Cu 4 Br 6 are interconvertible through external chemical stimuli or reverse crystallization. In addition, both compounds demonstrate luminescence on-off switching upon thermal stimuli. The sensitivity of (TEP) 2 Cu 2 Br 4 and (TEP) 2 Cu 4 Br 6 to the chemical and thermal stimuli coupled with their ultrabright emission allows their consideration for practical applications such as solid-state lighting, sensing, information storage, and anticounterfeiting.

  • Synthesis and Characterization of New Hybrid Organic–Inorganic Metal Halides [(CH3)3SO]M2I3 (M = Cu and Ag)

    by Tamanna Pinky, Dilruba A. Popy, Zheng Zhang, Jie Jiang, Ruth Pachter, Bayram Saparov

    Recently, all-inorganic copper(I) metal halides have emerged as promising optical materials due to their high light emission efficiencies. This work details the crystal structure of the two hybrid organic-inorganic metal halides [(CH3)3SO]M2I3 (M = Cu and Ag) and their alloyed derivatives [(CH3)3SO]Cu2-xAgxI3 (x = 0.2; 1.25), which were obtained by incorporating trimethylsulfoxonium organic cation (CH3)3SO+ in place of Cs+ in the yellow-emitting all-inorganic CsCu2I3. These compounds are isostructural and centrosymmetric with the space group Pnma, featuring one-dimensional edge-sharing [M2I3]- anionic double chains separated by rows of (CH3)3SO+ cations. Based on density functional theory calculations, the highest occupied molecular orbitals (HOMOs) of [(CH3)3SO]M2I3 (M = Cu and Ag) are dominated by the Cu or Ag d and I p orbitals, while the lowest unoccupied molecular orbitals (LUMOs) are Cu or Ag s and I p orbitals. [(CH3)3SO]Cu2I3 single crystals exhibit a semiconductor resistivity of 9.94 × 109 Ω·cm. Furthermore, a prototype [(CH3)3SO]Cu2I3 single-crystal-based X-ray detector with a detection sensitivity of 200.54 uCGy-1 cm-2 (at electrical field E = 41.67 V/mm) was fabricated, indicating the potential use of [(CH3)3SO]Cu2I3 for radiation detection applications.


  • Zero-Dimensional Broadband Yellow Light Emitter (TMS)3Cu2I5 for Latent Fingerprint Detection and Solid-State Lighting

    by Dhritiman Banerjee, Dilruba A. Popy, Brian C. Leininger, Tielyr D. Creason, Varun Nitin Mapara, Madalina Furis, Mario F. Borunda, Bayram Saparov

    We report a new hybrid organic-inorganic Cu(I) halide, (TMS)3Cu2I5 (TMS = trimethylsulfonium), which demonstrates high efficiency and stable yellow light emission with a photoluminescence quantum yield (PLQY) over 25%. The zero-dimensional crystal structure of the compound is comprised of isolated face-sharing photoactive [Cu2I5]3- tetrahedral dimers surrounded by TMS+ cations. This promotes strong quantum confinement and electron-phonon coupling, leading to a highly efficient emission from self-trapped excitons. The hybrid structure ensures prolonged stability and nonblue emission compared to unstable blue emission from all-inorganic copper(I) halides. Substitution of Cu with Ag leads to (TMS)AgI2, which has a one-dimensional chain structure made of edge-sharing tetrahedra, with weak light emission properties. Improved stability and highly efficient yellow emission of (TMS)3Cu2I5 make it a candidate for practical applications. This has been demonstrated through utilization of (TMS)3Cu2I5 in white light-emitting diode with a high Color Rendering Index value of 82 and its use as a new luminescent agent for visualization of in-depth latent fingerprint features. This work illuminates a new direction in designing multifunctional nontoxic hybrid metal halides.


  • Intermolecular arrangement facilitated broadband blue emission in group-12 metal (Zn, Cd) hybrid halides and their applications

    by D.A. Popy, B.N. Evans, J. Jiang, T.D. Creason, D. Banerjee, L.M. Loftus, R. Pachter, D.T. Glatzhofer, B. Saparov