MBMatthew G. Borselli
Matthew G. Borselli
*This is an algorithmically generated author record based on publicly available information.
Research Subjects
Research Interests
Matthew G. Borselli has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
Matthew T. Rakher
HRL Laboratories, LLC
5 shared publications- Aaron M. Jones
HRL Laboratories, LLC, 3011 Malibu Canyon Road, Malibu, California 90265, USA
4 shared publications - Clayton A. C. Jackson
HRL Laboratories, LLC
4 shared publications - Jacob Z. Blumoff
HRL Laboratories, LLC
4 shared publications - Thaddeus D. Ladd
HRL Laboratories, LLC
4 shared publications - Aaron J. Weinstein
HRL Laboratories, LLC
3 shared publications
Latest Publications
- Open Access
- 11 June 2024
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 5 (2) , 020356
Full-Permutation Dynamical Decoupling in Triple-Quantum-Dot Spin Qubits
Dynamical decoupling of spin qubits in silicon can increase fidelity and can be used to extract the frequency spectra of noise processes. We demonstrate a full-permutation dynamical decoupling technique that cyclically exchanges the spins in a triple-quantum-dot qubit. This sequence not only suppresses both low-frequency charge-noise-induced and magnetic-noise-induced errors; it also refocuses leakage errors to first order, which is particularly interesting for encoded exchange-only qubits. For a specific construction, which we call “NZ1y,” the qubit is isolated from error sources to such a degree that we measure a remarkable exchange pulse error of . This sequence maintains a quantum state for roughly 18,000 exchange pulses, extending the qubit coherence from to . We experimentally validate an error model that includes charge noise and magnetic noise in two ways: by direct exchange-qubit simulation and by integration of the assumed noise spectra with derived filter functions, both of which reproduce the measured error and leakage with respect to a change of the repetition rate.- 11 June 2024
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 5 (2) , 020356
Open AccessFull-Permutation Dynamical Decoupling in Triple-Quantum-Dot Spin Qubits
Dynamical decoupling of spin qubits in silicon can increase fidelity and can be used to extract the frequency spectra of noise processes. We demonstrate a full-permutation dynamical decoupling technique that cyclically exchanges the spins in a triple-quantum-dot qubit. This sequence not only suppresses both low-frequency charge-noise-induced and magnetic-noise-induced errors; it also refocuses leakage errors to first order, which is particularly interesting for encoded exchange-only qubits. For a specific construction, which we call “NZ1y,” the qubit is isolated from error sources to such a degree that we measure a remarkable exchange pulse error of . This sequence maintains a quantum state for roughly 18,000 exchange pulses, extending the qubit coherence from to . We experimentally validate an error model that includes charge noise and magnetic noise in two ways: by direct exchange-qubit simulation and by integration of the assumed noise spectra with derived filter functions, both of which reproduce the measured error and leakage with respect to a change of the repetition rate. - Open Access
Full-permutation dynamical decoupling in triple-quantum-dot spin qubits
Dynamical decoupling of spin qubits in silicon can enhance fidelity and be used to extract the frequency spectra of noise processes. We demonstrate a full-permutation dynamical decoupling technique that cyclically exchanges the spins in a triple-dot qubit. This sequence not only suppresses both low frequency charge-noise- and magnetic-noise-induced errors; it also refocuses leakage errors to first order, which is particularly interesting for encoded exchange-only qubits. For a specific construction, which we call NZ1y, the qubit is isolated from error sources to such a degree that we measure a remarkable exchange pulse error of $5\times10^{-5}$. This sequence maintains a quantum state for roughly 18,000 exchange pulses, extending the qubit coherence from $T_2^*=2~\mu$s to $T_2 = 720~\mu$s. We experimentally validate an error model that includes $1/f$ charge noise and $1/f$ magnetic noise in two ways: by direct exchange-qubit simulation, and by integration of the assumed noise spectra with derived filter functions, both of which reproduce the measured error and leakage with respect to changing the repetition rate.Open AccessFull-permutation dynamical decoupling in triple-quantum-dot spin qubits
Dynamical decoupling of spin qubits in silicon can enhance fidelity and be used to extract the frequency spectra of noise processes. We demonstrate a full-permutation dynamical decoupling technique that cyclically exchanges the spins in a triple-dot qubit. This sequence not only suppresses both low frequency charge-noise- and magnetic-noise-induced errors; it also refocuses leakage errors to first order, which is particularly interesting for encoded exchange-only qubits. For a specific construction, which we call NZ1y, the qubit is isolated from error sources to such a degree that we measure a remarkable exchange pulse error of $5\times10^{-5}$. This sequence maintains a quantum state for roughly 18,000 exchange pulses, extending the qubit coherence from $T_2^*=2~\mu$s to $T_2 = 720~\mu$s. We experimentally validate an error model that includes $1/f$ charge noise and $1/f$ magnetic noise in two ways: by direct exchange-qubit simulation, and by integration of the assumed noise spectra with derived filter functions, both of which reproduce the measured error and leakage with respect to changing the repetition rate. - Open Access
- 29 March 2022
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 3 (1) , 010352
Fast and High-Fidelity State Preparation and Measurement in Triple-Quantum-Dot Spin Qubits
We demonstrate rapid high-fidelity state preparation and measurement in exchange-only / triple-quantum-dot qubits. Fast measurement integration (980-ns) and initialization (approximately 300-ns) operations are performed with all-electrical baseband control. We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but applicable more broadly, and report an infidelity of . This result is enabled by a high-valley-splitting heterostructure, initialization at the two- to three-electron charge boundary, and careful assessment and mitigation of during spin-to-charge conversion. The ultimate fidelity is limited by a number of comparably important factors and we identify clear paths toward further improved fidelity and speed. Along with an observed single-qubit randomized benchmarking error rate of , this work demonstrates initialization, control, and measurement of / triple-dot qubits at fidelities and durations that are promising for scalable quantum information processing.- 29 March 2022
- Published by American Physical Society (APS) in PRX Quantum
- Vol. 3 (1) , 010352
Open AccessFast and High-Fidelity State Preparation and Measurement in Triple-Quantum-Dot Spin Qubits
We demonstrate rapid high-fidelity state preparation and measurement in exchange-only / triple-quantum-dot qubits. Fast measurement integration (980-ns) and initialization (approximately 300-ns) operations are performed with all-electrical baseband control. We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but applicable more broadly, and report an infidelity of . This result is enabled by a high-valley-splitting heterostructure, initialization at the two- to three-electron charge boundary, and careful assessment and mitigation of during spin-to-charge conversion. The ultimate fidelity is limited by a number of comparably important factors and we identify clear paths toward further improved fidelity and speed. Along with an observed single-qubit randomized benchmarking error rate of , this work demonstrates initialization, control, and measurement of / triple-dot qubits at fidelities and durations that are promising for scalable quantum information processing. - Open Access
Universal logic with encoded spin qubits in silicon
Qubits encoded in a decoherence-free subsystem and realized in exchange-coupled silicon quantum dots are promising candidates for fault-tolerant quantum computing. Benefits of this approach include excellent coherence, low control crosstalk, and configurable insensitivity to certain error sources. Key difficulties are that encoded entangling gates require a large number of control pulses and high-yielding quantum dot arrays. Here we show a device made using the single-layer etch-defined gate electrode architecture that achieves both the required functional yield needed for full control and the coherence necessary for thousands of calibrated exchange pulses to be applied. We measure an average two-qubit Clifford fidelity of $97.1 \pm 0.2\%$ with randomized benchmarking. We also use interleaved randomized benchmarking to demonstrate the controlled-NOT gate with $96.3 \pm 0.7\%$ fidelity, SWAP with $99.3 \pm 0.5\%$ fidelity, and a specialized entangling gate that limits spreading of leakage with $93.8 \pm 0.7\%$ fidelity.Open AccessUniversal logic with encoded spin qubits in silicon
Qubits encoded in a decoherence-free subsystem and realized in exchange-coupled silicon quantum dots are promising candidates for fault-tolerant quantum computing. Benefits of this approach include excellent coherence, low control crosstalk, and configurable insensitivity to certain error sources. Key difficulties are that encoded entangling gates require a large number of control pulses and high-yielding quantum dot arrays. Here we show a device made using the single-layer etch-defined gate electrode architecture that achieves both the required functional yield needed for full control and the coherence necessary for thousands of calibrated exchange pulses to be applied. We measure an average two-qubit Clifford fidelity of $97.1 \pm 0.2\%$ with randomized benchmarking. We also use interleaved randomized benchmarking to demonstrate the controlled-NOT gate with $96.3 \pm 0.7\%$ fidelity, SWAP with $99.3 \pm 0.5\%$ fidelity, and a specialized entangling gate that limits spreading of leakage with $93.8 \pm 0.7\%$ fidelity. - 21 April 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 15 (4) , 044033
Detuning Axis Pulsed Spectroscopy of Valley-Orbital States in / - Quantum DotsSilicon-quantum-dot qubits must contend with low-lying valley excited states that are sensitive functions of the quantum-well heterostructure and disorder; quantifying and maximizing the energies of these states are critical to improving device performance. We describe a spectroscopic method for probing excited states in isolated /- double quantum dots using standard baseband pulsing techniques, easing the extraction of energy spectra in multiple-dot devices. We use this method to measure dozens of valley excited-state energies spanning multiple wafers, quantum dots, and orbital states, which are crucial for evaluating the dependence of valley splitting on quantum well width and other epitaxial conditions. Our results suggest that narrower wells can be beneficial for increasing valley splittings, but this effect can be confounded by variations in growth and fabrication conditions. These results underscore the importance of valley-splitting measurements for guiding the development of qubits.- 21 April 2021
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 15 (4) , 044033
Detuning Axis Pulsed Spectroscopy of Valley-Orbital States in / - Quantum DotsSilicon-quantum-dot qubits must contend with low-lying valley excited states that are sensitive functions of the quantum-well heterostructure and disorder; quantifying and maximizing the energies of these states are critical to improving device performance. We describe a spectroscopic method for probing excited states in isolated /- double quantum dots using standard baseband pulsing techniques, easing the extraction of energy spectra in multiple-dot devices. We use this method to measure dozens of valley excited-state energies spanning multiple wafers, quantum dots, and orbital states, which are crucial for evaluating the dependence of valley splitting on quantum well width and other epitaxial conditions. Our results suggest that narrower wells can be beneficial for increasing valley splittings, but this effect can be confounded by variations in growth and fabrication conditions. These results underscore the importance of valley-splitting measurements for guiding the development of qubits.- Open Access
- 8 June 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (23) , 234001
Split-gate cavity coupler for silicon circuit quantum electrodynamics
Coherent charge-photon and spin-photon coupling has recently been achieved in silicon double quantum dots (DQDs). Here, we demonstrate a versatile split-gate cavity-coupler that allows more than one DQD to be coupled to the same microwave cavity. Measurements of the cavity transmission as a function of level detuning yield a charge cavity coupling rate of 58 MHz, a charge decoherence rate of 36 MHz, and a cavity decay rate of 1.2 MHz. The charge cavity coupling rate is in good agreement with device simulations. Our coupling technique can be extended to enable simultaneous coupling of multiple DQDs to the same cavity mode, opening the door to long-range coupling of semiconductor qubits using microwave frequency photons.- 8 June 2020
- Published by AIP Publishing in Applied Physics Letters
- Vol. 116 (23) , 234001
Open AccessSplit-gate cavity coupler for silicon circuit quantum electrodynamics
Coherent charge-photon and spin-photon coupling has recently been achieved in silicon double quantum dots (DQDs). Here, we demonstrate a versatile split-gate cavity-coupler that allows more than one DQD to be coupled to the same microwave cavity. Measurements of the cavity transmission as a function of level detuning yield a charge cavity coupling rate of 58 MHz, a charge decoherence rate of 36 MHz, and a cavity decay rate of 1.2 MHz. The charge cavity coupling rate is in good agreement with device simulations. Our coupling technique can be extended to enable simultaneous coupling of multiple DQDs to the same cavity mode, opening the door to long-range coupling of semiconductor qubits using microwave frequency photons.