Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lingxue Wang has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A High-Performance Ultraviolet Optical Sensing System for Rotating Detonation Extreme Combustion

    by Wen Dai, Yingchen Shi, Junhui Ma, Mingyang Bu, Lingxue Wang, Qiaofeng Xie, Haocheng Wen, Bing Wang

    Extreme combustion features strong unsteadiness, heterogeneity and multi-physics coupling, which is of great significance for advanced propulsion systems. High-performance sensing of such extreme combustion flow fields is critical to revealing physical mechanisms and capturing fine flow structures. However, it faces severe challenges: rich multi-band spectral characteristics require multi-spectral observation; ultra-transient processes demand high-frequency imaging; and high-performance photoelectric enhancement is necessary under short gate width and high frame rates. To solve these problems, this study developed a high-performance ultraviolet optical sensing system (HUOSS), which achieves megahertz-level imaging at a 1608 × 1104 full-frame resolution and provides a 107 electron gain in the ultraviolet band. The HUOSS has been applied to chemiluminescence sensing of a hydrogen/ammonia-air rotating detonation as a representative extreme combustion system. Based on the analysis of representative influencing factors (e.g., the transmission characteristic of the bandpass filter and the intensifier gate width) in the HUOSS, the filter transmission loss and its influence on the gate width settings have been revealed. From the chemiluminescence sensing images captured in the experiments, the fine structure and evolution of detonation waves have been clearly identified, verifying the high-speed imaging capability. Furthermore, simultaneous OH* and NH* multi-spectral observation has been realized, and the effects of ammonia addition have been analyzed, validating the multi-spectral diagnostic capacity of the system. This study provides an effective diagnostic method for extreme transient combustion research, and comprehensively verified the multi-spectral, extremely transient and high signal-to-noise ratio sensing capabilities of this system.

  • Open Access

    UV and Visible Radiation Characteristics of Thermoacoustic Instabilities in an Ammonia–Methane Premixed Swirl-Stabilized Combustor

    by Junhui Ma, Xianglan Fu, Dongqi Chen, Le Chang, Lingxue Wang, Yingchen Shi, Haocheng Wen, Bing Wang

    Ammonia (NH3) is a promising carbon-free energy carrier for low-carbon power generation. However, in turbulent ammonia–methane (NH3-CH4) premixed swirling flames, operating at lean conditions to limit NOX, emissions can trigger strong thermoacoustic oscillations. This study investigates thermoacoustic oscillatory instability in an NH3-CH4 swirl-stabilized combustor using the chemiluminescence of CH*, OH*, and NH* over a wide range of ammonia fuel fraction (XNH3). Combined spectral measurements and 2D chemiluminescence imaging are employed to obtain the global emission characteristics and spatial distributions of OH* and NH* in the UV band and CH* in the visible band. A custom-designed intensified CMOS (ICMOS) camera based on a high-gain UV–visible image intensifier with direct coupling is developed to enable sensitive OH* and NH* imaging (gain > 104). Frequency analysis of continuous CH* imaging, together with morphology-based principal component analysis and k-means clustering of 46 image features, shows that oscillatory combustion occurs for XNH3 < 0.40, whereas XNH3 ≥ 0.40 leads to multimode, stable combustion. As XNH3 increases, OH* and NH* fields progressively decouple from CH*, becoming more elongated and shifting downstream. These results demonstrate that UV radical chemiluminescence provides indispensable information on NH3 reaction zones and should be combined with CH* diagnostics for reliable thermoacoustic analysis and control in practical NH3-fueled combustion systems.


  • Open Access

    OH* 3D Concentration Measurement of Non-Axisymmetric Flame via Near-Ultraviolet Volumetric Emission Tomography

    by Junhui Ma, Lingxue Wang, Dongqi Chen, Dezhi Zheng, Guoguo Kang, Yi Cai

    Measuring the three-dimensional (3D) concentration of the ubiquitous intermediate OH* across combustion systems, spanning carbon-based fuels to zero-carbon alternatives such as H2 and NH3, provides vital insights into flame topology, reaction pathways, and emission formation mechanisms. Optical imaging methods have attracted vital interests due to non-intrusiveness in the combustion process. However, achieving accurate 3D concentration of OH* via imaging in non-axisymmetric flames remains challenging. This work presents a near-ultraviolet (NUV) volumetric emission tomography-based OH* measuring method that integrates a three-layer OH* imaging model, a calibration procedure utilizing narrow-band NUV radiometry, and a threshold-constrained Local Filtered Back-Projection Simultaneous Algebraic Reconstruction Technique (LFBP-SART) algorithm. When applied to a non-axisymmetric Bunsen flame, the method reveals multiple small flame structures matching the fairing pattern in the reconstructed 3D OH* field, with a maximum OH* molar concentration of approximately 0.04 mol/m3 and an overall relative uncertainty of about 8.7%. Given its straightforward requirements, this technique is considered adaptable to other free radicals.


  • Open Access

    A Nanosecond-Scale, High-Spatiotemporal-Resolution, Near-UV–Visible Imaging System for Advanced Optical Diagnostics with Application to Rotating Detonation Engines

    by Junhui Ma, Wen Dai, Dongqi Chen, Jingling Hu, Dong Yang, Lingxue Wang, Dezhi Zheng, Yingchen Shi, Haocheng Wen, Bing Wang

    The combustion diagnostics of rotating detonation engines (RDE) based on excited-state hydroxyl radical (OH*) chemiluminescence imaging is an important method used to characterize combustion flow fields. Overcoming the limitations of imaging devices to achieve nanosecond-scale temporal resolution is crucial for observing the propagation of high-frequency detonation waves. In this work, a nanosecond-scale imaging system with an ultra-high spatiotemporal resolution was designed and constructed. The system employs four near ultraviolet (NUV)-visible ICMOS, equipped with a high-gain, dual-microchannel plate (MCP) architecture fabricated using a new atomic layer deposition (ALD) process. The system has a maximum electronic gain of 107, a minimum integration time of 3 ns, a minimum interval time 4 ns, and an imaging resolution of 1608 × 1104 pixels. Using this system, high-spatiotemporal-resolution visualization experiments were conducted on RDE, fueled by H2–oxygen-enriched air and NH3–H2–oxygen-enriched air. The results enable the observation of the detonation wave structure, the cellular structure, and the propagation velocity. In combination with optical flow analysis, the images reveal vortex structures embedded within the cellular structure. For NH3-H2 mixed fuel, the results indicate that detonation wave propagation is more unstable than in H2 combustion, with a larger bright gray area covering both the detonation wave and the product region. The experimental results demonstrate that high spatiotemporal OH* imaging enables non-contact, full-field measurements, providing valuable data for elucidating RDE combustion mechanisms, guiding model design, and supporting NH3 combustion applications.


  • 3D Monte Carlo tracking model of the external quantum efficiency and halo for subwavelength-grating NaKSb(Cs) image intensifier

    by Dongqi Chen, Lingxue Wang, Jiangyi Gu, Jinneng Zeng, Ting Wang, Guoguo Kang, Dezhi Zheng, Yi Cai

    A NaKSb(Cs) image intensifier with subwavelength-grating on the optical window is crucial for enhancing external quantum efficiency (EQE) and reducing halo. This study established a comprehensive 3D Monte Carlo model to simulate the photon and electron transport, photoelectric conversion, and emission processes. The simulation results demonstrate that the optical path of the photons in the photocathode is the primary factor influencing the photoelectric conversion efficiency. Multiple reflections of photons in the gap, including lens, window, photocathode and microchannel plate (MCP), are responsible for the halo formation. In addition, the grating can suppress the change in EQE with the incident angle. The model results for the non-grating and single-layer grating cases deviated by 1.57% and 2.44% for the EQE and by 1.03% and 4.35% for the halo, respectively.


  • Absorption-enhanced nanopillar-arrayed Na2KSb photocathode for improving image intensifier performance

    by Miao Dong, Lingxue Wang, Dongqi Chen, Guoguo Kang, Yanni Gong, Yun Wang, Dezhi Zheng, Yuejin Zhao, Yi Cai

    Na2KSb photocathodes utilized in image intensifiers typically comprise flat films with a thickness of 0.15 µm, to balance optical absorption depth and minority-carrier (electron) diffusion length. However, these configurations often exhibit insufficient light absorption across visible and near-infrared wavelengths, resulting in low quantum efficiency. To address this challenge, we developed a nanopillar-arrayed Na2KSb photocathode integrated with a bilayer TiO2 two-dimensional nanograting. This design preserved the standard thickness while achieving a 30.1% enhancement in optical absorption through guided-mode resonance and transmission diffraction. Consequently, the measured quantum efficiency increased by 3.75% at 0.68 µm. Our study provides insights for improving absorption efficiency in nanopillar-arrayed Na2KSb photocathodes, thereby enhancing the performance of image intensifiers.


  • CGMRF: CLIP-guide multimodal registration and fusion for a visible–infrared dual-modality imaging system

    by Wenqu Zhao, Lingxue Wang, Lian Zhang, Dezhi Zheng, Yi Cai

    In this Letter, we propose CLIP-guided multimodal registration and fusion (CGMRF), a semantic understanding-based multimodal image fusion system, for visible and infrared (IR) dual-modality imaging. CGMRF leverages semantic similarity, better aligned with human visual interpretation, to address the challenges of multimodal image registration and fusion. Experimental results across multiple metrics demonstrate the advantages of the proposed CGMRF system.