Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Krastin Yordanov has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Preliminary Comparative Characterization of Low-Rank Lignite Powders Based on Physicochemical Properties and Particle Size

    by Nevena M. Mileva, Penka Zlateva, Angel Terziev, Krastin Yordanov, Adriana Comarlă, Francisc Comarlă

    Low-rank lignites remain potential feedstocks for hydrogen production through steam gasification, although their high moisture and ash contents impose considerable energy and operational constraints. This study compared three lignite samples from different mining sources using ultimate analysis, moisture and ash determination, bomb calorimetry, and particle size analysis. Three monthly samples from each source were analysed, and the results are expressed as mean ± standard deviation on an as-received basis. All lignites contained approximately 42 wt.% moisture and 20–23 wt.% ash. Sample 2 exhibited the most favourable combination of properties, with the highest carbon (22.07 ± 0.49 wt.%) and hydrogen (2.47 ± 0.03 wt.%) contents, the lowest ash content (20.05 ± 0.98 wt.%), and the highest measured heating value (8.01 ± 0.16 MJ kg−1). It also had a lower reported fraction retained on the 0.20 mm sieve than Sample 1. Sample 3 showed the lowest moisture content (41.77 ± 0.25 wt.%) and intermediate overall characteristics. The resulting suitability ranking was Sample 2 > Sample 3 > Sample 1. This ranking provides a preliminary basis for selecting lignites for subsequent gasification experiments and should not be interpreted as direct evidence of hydrogen yield or process efficiency.

  • Open Access

    Improving Energy Performance in Polyethylene Film Production: A Real Industrial Case Study with Subsystem-Level Analysis

    by Penka Zlateva, Angel Terziev, Krastin Yordanov, Nevena Mileva

    This study presents a system-level and subsystem-level evaluation of energy performance in an industrial polyethylene film production system based on real operational data. The analysis focuses on specific energy consumption (SEC) as a key performance indicator, considering both total system behavior and the contribution of energy-intensive subsystems, namely extrusion and converting processes. The initial system exhibits SEC values ranging from 1.267 to 1.688 kWh/kg, indicating relatively high energy intensity compared to established industrial benchmarks. Following technological modernization, SEC is reduced to 0.43 kWh/kg for extrusion and 0.09 kWh/kg for converting, corresponding to improvements exceeding 60%. The total annual energy saving potential is estimated at 906 MWh (39%), accompanied by a proportional reduction in CO2 emissions. The results demonstrate that energy performance is strongly influenced by production load, material losses, and process stability. The novelty of the study lies in the subsystem-level quantification of energy performance using real industrial data and in the identification of the interaction between production efficiency, waste generation, and energy consumption. The findings provide a practical framework for energy optimization in polymer processing systems and allow comparison with European best practices.

  • Open Access

    Small industrial chillers operating with R290: environmental and engineering considerations

    by Krastin Yordanov, Penka Zlateva, Nevena Mileva

    This paper examines the use of propane (R290) as a low-GWP refrigerant for small industrial chillers, focusing on its environmental impact, thermodynamic performance, and safety aspects. The study compares the main characteristics of R290 with those of conventional refrigerants such as R134a and R404A, using data reported in the literature together with current international regulations. Particular attention is given to key indicators including Global Warming Potential (GWP), Total Equivalent Warming Impact (TEWI), cooling performance, and energy efficiency. With zero ozone depletion potential (ODP = 0) and a very low global warming potential (GWP = 3), R290 offers a sustainable alternative to conventional HFC refrigerants. Previous studies have shown that R290 can provide cooling performance comparable to that of R134a and R404A while reducing compressor energy consumption and greenhouse gas emissions. The paper also discusses practical engineering aspects of using R290, including refrigerant charge limitations, leak detection, ventilation requirements, electrical protection, and compliance with current international safety standards. Overall, the findings indicate that R290 is a promising, environmentally friendly, and energy-efficient refrigerant for small industrial refrigeration systems.

  • Open Access

    Comparative Thermochemical and Combustion Analysis of Biomass Pellets Derived from Woody and Agricultural Residues

    by Nevena Milcheva Mileva, Penka Zlateva, Krastin Yordanov, Angel Terziev

    This study presents a comparative thermochemical and combustion analysis of biomass pellets derived from softwood, hardwood, sunflower husks, wheat straw, and lavender residues. This investigation was performed using thermogravimetric analysis (TG), derivative thermogravimetric analysis (DTG), and differential scanning calorimetry (DSC) to evaluate the thermal degradation behavior, combustion reactivity, heat-release characteristics, and ash-forming tendencies of the investigated biomass types. The results revealed substantial differences between woody biomass and agricultural residues in terms of thermal stability, thermal degradation behavior, and energy output. Softwood pellets exhibited the highest thermal reactivity, the most intense devolatilization process, and the highest heat release during combustion, indicating higher thermal reactivity and favorable fuel properties. Hardwood pellets demonstrated improved thermal stability due to increased lignin content, resulting in broader thermal decomposition regions and more gradual heat release. In contrast, sunflower husk and wheat straw pellets showed lower thermal reactivity and significantly higher residual mass, indicating elevated ash content and reduced thermal decomposition behavior. Lavender pellets exhibited intermediate thermochemical behavior associated with the presence of volatile extractives and moderate thermal stability. The integrated TG-DTG-DSC approach enabled a direct comparison of woody biomass and agricultural residues under identical experimental conditions and expanded the available thermochemical data for lavender-derived pellets. The results provide a comparative framework for assessing biomass resources intended for energy applications.

  • Open Access

    Hydrogen from Waste Plastics as a Low-Carbon Energy Pathway: A Socio-Technical Assessment of Thermochemical Conversion and Market Acceptance

    by Penka Zlateva, Mariana Murzova, Angel Terziev, Krastin Yordanov, Nevena M. Mileva

    Hydrogen production from waste plastics is emerging as a potential low-carbon pathway that integrates waste management with energy production. This study develops an integrated socio-technical framework combining a comparative assessment of thermochemical conversion pathways with market acceptance analysis based on survey data (n = 162). The results show that acceptance is mainly driven by trust (β = 0.47) and environmental perception (β = 0.32), while price sensitivity has a negative effect (β = −0.21). Awareness does not significantly affect acceptance (β = 0.08). The model explains 48% of the variance (R2 = 0.48), and a strong correlation is observed between trust and acceptance (r = 0.68). These results show that technological performance alone is insufficient; consumer perception and economic factors play an equally important role, highlighting the need for integrated socio-technical approaches in low-carbon energy systems.

  • Open Access

    Hydrogen Production from Biomass Through Conversion Pathways and Energy Efficiency Analysis—A Review

    by Nevena M. Mileva, Penka Zlateva, Angel Terziev, Krastin Yordanov

    Hydrogen is increasingly seen as a viable energy carrier in the transition to low-carbon energy systems, mainly because of its high gravimetric energy density and the absence of carbon emissions at the point of use. In this context, producing hydrogen from biomass represents a practical and sustainable option, as it allows the use of renewable and waste resources while supporting circular economy principles. This work examines the main pathways for hydrogen production from biomass, considering both thermochemical and biochemical routes, with a focus on their energy performance and practical limitations. The analysis shows that thermochemical processes, particularly gasification, remain the most developed and scalable solutions for converting solid biomass into hydrogen-rich gas, although their performance depends strongly on feedstock properties, reactor design, and operating conditions. By comparison, biochemical processes such as dark fermentation and photofermentation are more suitable for wet biomass but are limited by lower hydrogen yields and issues related to process stability. From a thermal engineering standpoint, system performance is influenced by heat transfer constraints, the energy demand of endothermic reactions, and the efficiency of gas cleaning, while parameters such as temperature, steam-to-biomass ratio, and equivalence ratio play a key role in optimization. Advanced approaches, including catalytic and sorption-enhanced gasification, show potential for improving performance. Overall, efficient hydrogen production requires a system-level approach, as no single technology can be considered universally optimal.


  • Open Access

    An analysis of natural refrigerants in modern heat pump systems

    by K Yordanov, N Mileva, N Kolev, D Atanasov, A Yangyozov

    A heat pump system is generally a complex combination of different compounds which are connected in accordance with specific rules and controlled by specific algorithms and/or strategies. Indeed, any distribution and usage of the various components can be identified as a heat pump system. Moreover, any device in which different parts are properly combined to fulfill specific demands, even if they are not exchangeable and do not connect with each other, can be classified as a heat pump system. Due to its high energy consumption, the heating, ventilation, and air conditioning (HVAC) system often represents the main cause of the high energy requirements of many industries. Another field where heat pump concepts could be applied is related to the design of intelligent and custom applications, such as smart buildings. In this application, the current smart concepts, which are generally designed using different technologies configured in a stand-alone mode, are combined to obtain more efficient systems.


  • Open Access

    Influence of Limestone Dust on PV Panel Efficiency in a Small Solar Park in Bulgaria

    by Penka Zlateva, Angel Terziev, Krastin Yordanov, Martin Ivanov, Borislav Stankov

    The presented paper analyzes the impact of limestone dust accumulation on photovoltaic (PV) panel performance, focusing on the specific surrounding conditions near quarries. The results from the performed field measurements show that high concentrations of limestone dust accumulate significantly faster in these areas, and a hard layer is formed in the presence of moisture. This layer of dust is resistant to removal, even in moderate precipitation and winds with speeds between 6 and 9 m/s, making it a significant problem for the long-term performance of the systems. The analysis revealed that the lack of systematic cleaning of the panels leads to a drop in efficiency of over 20%, with this loss pointedly limiting the return on investment. This study highlights the need for innovative maintenance approaches, such as regular cleaning, use of special coatings and adapting designs to specific environmental conditions. This is essential for the development of strategies to manage, maintain and improve PV systems in areas with high levels of dust pollution.


  • Open Access

    Consumer preferences for solid biomass fuels for energy purposes

    by Penka Zlateva, Krastin Yordanov, Mariana Murzova, Angel Terziev

    A specialized marketing survey was conducted across wholesale markets, manufacturing enterprises, online platforms and retail stores in Bulgarian market to analyze consumer preferences for various types of pellets. The study aims to identify key factors influencing consumer choices, with a particular focus on pellet qualities like ash content and the impact of additives on the combustion process. Statistical analysis of the survey results reveals that manufacturing enterprises are the most preferred purchase channels due to the superior quality of their products, while pellets from online platforms often receive negative feedback due to quality issues. Based on the findings, four types of pellets with and without additives are selected for further analysis: 100% coniferous; a mix of 80% coniferous and 20% deciduous; a mix of 80% coniferous and 20% sunflower and 100% sunflower pellets. To confirm the combustion characteristics of these pellet types, thermogravimetry (TG) and differential scanning calorimetry (DSC) analyses are conducted at heating rates of 5°C/min and 10°C/min up to 600°C. The analysis of variance (ANOVA) on the TG data shows significant differences in mass loss during thermal treatment between the various pellet types, demonstrating differences in efficiency and quality. The results indicate that sunflower pellets produce more ash, while wood pellets have superior combustion properties with lower ash generation. These findings highlight the need for improved consumer awareness, especially regarding the impact of pellet composition and additives on ash production. The correlation analysis of the DSC data reveals that some pellet types exhibite a high degree of similarity, suggesting they could be used interchangeably in combustion systems, while other types show significant differences due to varying raw material compositions. The study concludes that improving combustion processes requires careful selection of pellet fuels tailored to specific system needs and emphasizes the importance of better labeling and clearer information on pellet composition to enhance consumer knowledge and promote best practices in biomass fuel usage.


  • Open Access

    NUMERICAL SIMULATION OF DOUBLE SKIN FACADES IN WINTER CLIMATES

    by Penka Zlateva, Krastin Yordanov, Rositsa Petkova-Slipets, Martin Ivanov

    The presented study reveals the analysis of the thermal behaviour of double skin facades (DSF) in winter conditions, using numerical simulation tools. The aim of the study is the development of a 3D simulation model, capable to evaluate the thermal behaviour of the modular elements in the DSF systems. This is essential requirement in the prediction and visualization of the facade’s thermal behaviour in the design stage and in the assessment of the real behaviour of such facade, when the specified modular elements are changed by the customer. The presented numerical simulation model aims to adequately reproduce the resulting set of thermal characteristics of the modular elements, to determine with sufficient accuracy their distribution in the real objects, implemented inthe models in DSF systems. An algorithm is developed in the study and graphical visualization of three models of double facade systems with and without DSF are analysed under winter conditions, using data from a meteorological station located in North-Eastern Bulgaria. A software product was used to represent the processes of heat and mass transfer, in which the corresponding boundary and initial conditions were set, based on which the results and analyses were obtained. The use of such numerical modelling is effective enough to predict the expected thermal behaviour of DSF systems. Thus, when selecting a DSF facade system, awareness of the thermal behaviour is ensured, and the financial efficiency of the project is more easily determined. Such a customized approach not only improves the sustainability and efficiency of buildings, but also satisfies the unique preferences and requirements of the customers.