Boris Kuzmanović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Boris Kuzmanović has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandar Ivezić
BioSense Institute, University of Novi Sad, Dr Zorana Đinđića 1, 21000 Novi Sad, Serbia
5 shared publications - Kristina Petrović
Maize Research Institute Zemun Polje, Slobodana Bajica 1, 11185 Belgrade, Serbia
5 shared publications - Branislav Trudić
University of Novi Sad , Institute of Lowland Forestry and Environment , Antona Čehova 13D , Novi Sad , Serbia
4 shared publications - Velimir Mladenov
Faculty of Agriculture, University of Novi Sad, Novi Sad, Serbia
3 shared publications - Ankica Sarajlić
Faculty of Agrobiotechnical Sciences Osijek, Josip Juraj Strossmayer University of Osijek, Vladimira Preloga 1, 31000 Osijek, Croatia
2 shared publications - Jovan Krndija
Forecasting and Warning Service in Crop Protection of the Republic of Serbia, Agricultural Advisory and Professional Service Kragujevac, Cara Lazara 15, 34000 Kragujevac, Serbia
2 shared publications
Latest Publications
- Open Access
Geospatial Sensing and Data-Driven Technologies in the Western Balkan 6 (Agro)Forestry Region: A Strategic Science–Technology–Policy Nexus Analysis
Geospatial sensing and data-driven technologies (GSDDTs) are playing an increasingly important role in transforming (agro)forestry practices across the Western Balkans 6 region (WB6). This review critically examines the current state of GSDDT application in six WB countries (also known as the WB6 group)—Albania, Bosnia and Herzegovina, Kosovo*, Montenegro, North Macedonia, and Serbia—with a focus on their contributions to sustainable (agro)forest management. The analysis explores the use of unmanned aerial vehicles (UAVs), light detection and ranging (LiDAR), geographic information systems (GIS), and satellite imagery in (agro)forest monitoring, biodiversity assessment, landscape restoration, and the promotion of circular economy models. Drawing on 25 identified case studies across WB6—for example, ALFIS, Forest Beyond Borders, ForestConnect, Kuklica Geosite Survey, CREDIT Vibes, and Project O2 (including drone-assisted reforestation in Kosovo*)—this review highlights both technological advancements and systemic limitations. Key barriers to effective GSDDT deployment across WB6 in the (agro)forestry sector and its cross-border cooperation initiatives include fragmented legal frameworks, limited technical expertise, weak institutional coordination, and reliance on short-term donor funding. In addition to mapping current practices, this paper offers a comparative overview of UAV regulations across the WB6 region and identifies six major challenges influencing the adoption and scaling of GSDDTs. To address these, it proposes targeted policy interventions, such as establishing national LiDAR inventories, harmonizing UAV legislation, developing national GSDDT strategies, and creating dedicated GSDDT units within forestry agencies. This review also underscores how GSDDTs contribute to compliance with seven European Union (EU) acquis chapters, how they support eight Sustainable Development Goals (SDGs) and their sixteen targets, and how they advance several EU Green Agenda objectives. Strengthening institutional capacities, promoting legal alignment, and enabling cross-border data interoperability are essential for integrating GSDDTs into national (agro)forest policies and research agendas. This review underscores GSDDTs’ untapped potential in forest genetic monitoring and landscape restoration, advocating for their institutional integration as catalysts for evidence-based policy and ecological resilience in WB6 (agro)forestry systems.
Open AccessGeospatial Sensing and Data-Driven Technologies in the Western Balkan 6 (Agro)Forestry Region: A Strategic Science–Technology–Policy Nexus Analysis
Geospatial sensing and data-driven technologies (GSDDTs) are playing an increasingly important role in transforming (agro)forestry practices across the Western Balkans 6 region (WB6). This review critically examines the current state of GSDDT application in six WB countries (also known as the WB6 group)—Albania, Bosnia and Herzegovina, Kosovo*, Montenegro, North Macedonia, and Serbia—with a focus on their contributions to sustainable (agro)forest management. The analysis explores the use of unmanned aerial vehicles (UAVs), light detection and ranging (LiDAR), geographic information systems (GIS), and satellite imagery in (agro)forest monitoring, biodiversity assessment, landscape restoration, and the promotion of circular economy models. Drawing on 25 identified case studies across WB6—for example, ALFIS, Forest Beyond Borders, ForestConnect, Kuklica Geosite Survey, CREDIT Vibes, and Project O2 (including drone-assisted reforestation in Kosovo*)—this review highlights both technological advancements and systemic limitations. Key barriers to effective GSDDT deployment across WB6 in the (agro)forestry sector and its cross-border cooperation initiatives include fragmented legal frameworks, limited technical expertise, weak institutional coordination, and reliance on short-term donor funding. In addition to mapping current practices, this paper offers a comparative overview of UAV regulations across the WB6 region and identifies six major challenges influencing the adoption and scaling of GSDDTs. To address these, it proposes targeted policy interventions, such as establishing national LiDAR inventories, harmonizing UAV legislation, developing national GSDDT strategies, and creating dedicated GSDDT units within forestry agencies. This review also underscores how GSDDTs contribute to compliance with seven European Union (EU) acquis chapters, how they support eight Sustainable Development Goals (SDGs) and their sixteen targets, and how they advance several EU Green Agenda objectives. Strengthening institutional capacities, promoting legal alignment, and enabling cross-border data interoperability are essential for integrating GSDDTs into national (agro)forest policies and research agendas. This review underscores GSDDTs’ untapped potential in forest genetic monitoring and landscape restoration, advocating for their institutional integration as catalysts for evidence-based policy and ecological resilience in WB6 (agro)forestry systems.
- Open Access
- 2 February 2025
- Published by MDPI AG in Horticulturae
- Vol. 11 (2) , 155
Biological Control Agents in Greenhouse Tomato Production (Solanum lycopersicum L.): Possibilities, Challenges and Policy Insights for Western Balkan Region
Greenhouse tomato production holds strong economic importance in the Western Balkan (WB) countries, driven by escalating market demands. To align with global food safety trends, systematic advancements in cultivation practices and pest management strategies are essential for the WB region. Conventional reliance on chemical pesticides as the primary pest control method has led to various adverse outcomes, impacting pest management effectiveness and reducing product quality. The impact of climate change on agricultural productivity further emphasizes the need for environmentally friendly solutions in pest protection. To address these challenges and mitigate the detrimental effects of chemical pesticides, this review explores sustainable, alternative solutions, like biological control agents (BCAs), for tomato pest control in the WB region. With biological control gaining recognition as an effective approach, yet remaining underutilized in the WB, this review provides a thorough analysis of the most effective, commercially available BCAs, critically evaluating their advantages and limitations. Widespread BCA application could support the expansion of the tomato production sector while fostering sustainable agricultural practices. Furthermore, the review explores the role of BCAs within Integrated Pest Management (IPM) frameworks in tomato production, emphasizing their alignment with Sustainable Development Goals (SDGs), particularly for countries aiming for EU integration.
- 2 February 2025
- Published by MDPI AG in Horticulturae
- Vol. 11 (2) , 155
Open AccessBiological Control Agents in Greenhouse Tomato Production (Solanum lycopersicum L.): Possibilities, Challenges and Policy Insights for Western Balkan Region
Greenhouse tomato production holds strong economic importance in the Western Balkan (WB) countries, driven by escalating market demands. To align with global food safety trends, systematic advancements in cultivation practices and pest management strategies are essential for the WB region. Conventional reliance on chemical pesticides as the primary pest control method has led to various adverse outcomes, impacting pest management effectiveness and reducing product quality. The impact of climate change on agricultural productivity further emphasizes the need for environmentally friendly solutions in pest protection. To address these challenges and mitigate the detrimental effects of chemical pesticides, this review explores sustainable, alternative solutions, like biological control agents (BCAs), for tomato pest control in the WB region. With biological control gaining recognition as an effective approach, yet remaining underutilized in the WB, this review provides a thorough analysis of the most effective, commercially available BCAs, critically evaluating their advantages and limitations. Widespread BCA application could support the expansion of the tomato production sector while fostering sustainable agricultural practices. Furthermore, the review explores the role of BCAs within Integrated Pest Management (IPM) frameworks in tomato production, emphasizing their alignment with Sustainable Development Goals (SDGs), particularly for countries aiming for EU integration.
- Open Access
Natural Enemies of the Pear Psylla, Cacopsylla pyri (Hemiptera: Psyllidae), and the Possibilities for Its Biological Control: A Case Study Review in the Western Balkan Countries
The accessible literature covered in this paper commonly highlights psyllids as a significant group of insects affecting pear trees, posing a continual challenge for commercial orchards. With the development of modern pear cultivation systems, Cacopsylla pyri Linnaeus 1758 (Hemiptera: Psyllidae) has emerged as a major pest in pear orchards across many European countries, including those in the Western Balkans. For years, the agricultural sector has primarily relied on chemical insecticides to control pear psyllas, but these methods often fail to produce satisfactory results. This is largely due to C. pyri’s rapid development of resistance to chemical treatments. Consequently, modern agriculture is increasingly shifting towards biological methods to manage C. pyri, involving the identification and conservation of its natural enemies. Although there is an abundance of research on the natural predators of C. pyri and their biocontrol applications across the globe, the Western Balkan region has conducted relatively few studies on the subject. Globally, various parasitoids, predators, and entomopathogenic fungi are often cited as effective against C. pyri. Specific species registered in the agroecological conditions of the Western Balkans include parasitic wasps such as Trechnites insidiosus Crawford, 1910 (Hymenoptera: Encyrtidae) and Prionomitus mitratus Dalman, 1820 (Hymenoptera: Encyrtidae), as well as the predatory bug Anthocoris nemoralis Fabricius, 1794 (Hemiptera: Anthocoridae). However, most Balkan countries have yet to fully utilise the potential of beneficial entomofauna or develop strategies for their commercial application at a national level. Considering that C. pyri is a major pest in pear cultivation and its natural enemies have not been thoroughly explored in most of the Western Balkans, this paper aims to review the literature data on available natural enemies of pear psyllas and to highlight and promote their undeniable potential in biological control.
Open AccessNatural Enemies of the Pear Psylla, Cacopsylla pyri (Hemiptera: Psyllidae), and the Possibilities for Its Biological Control: A Case Study Review in the Western Balkan Countries
The accessible literature covered in this paper commonly highlights psyllids as a significant group of insects affecting pear trees, posing a continual challenge for commercial orchards. With the development of modern pear cultivation systems, Cacopsylla pyri Linnaeus 1758 (Hemiptera: Psyllidae) has emerged as a major pest in pear orchards across many European countries, including those in the Western Balkans. For years, the agricultural sector has primarily relied on chemical insecticides to control pear psyllas, but these methods often fail to produce satisfactory results. This is largely due to C. pyri’s rapid development of resistance to chemical treatments. Consequently, modern agriculture is increasingly shifting towards biological methods to manage C. pyri, involving the identification and conservation of its natural enemies. Although there is an abundance of research on the natural predators of C. pyri and their biocontrol applications across the globe, the Western Balkan region has conducted relatively few studies on the subject. Globally, various parasitoids, predators, and entomopathogenic fungi are often cited as effective against C. pyri. Specific species registered in the agroecological conditions of the Western Balkans include parasitic wasps such as Trechnites insidiosus Crawford, 1910 (Hymenoptera: Encyrtidae) and Prionomitus mitratus Dalman, 1820 (Hymenoptera: Encyrtidae), as well as the predatory bug Anthocoris nemoralis Fabricius, 1794 (Hemiptera: Anthocoridae). However, most Balkan countries have yet to fully utilise the potential of beneficial entomofauna or develop strategies for their commercial application at a national level. Considering that C. pyri is a major pest in pear cultivation and its natural enemies have not been thoroughly explored in most of the Western Balkans, this paper aims to review the literature data on available natural enemies of pear psyllas and to highlight and promote their undeniable potential in biological control.
- Open Access
Drone-Related Agrotechnologies for Precise Plant Protection in Western Balkans: Applications, Possibilities, and Legal Framework Limitations
Modern agriculture necessitates the use of techniques and tools that pollute the environment less and improve the safety of food and feed production. In the field of plant protection, drones are attracting increasing attention due to their versatility and applicability in a variety of environmental and working conditions. Drone crop spraying techniques offer several advantages, including increased safety and cost effectiveness through autonomous and programmed operations based on specific schedules and routes. One of the main advantages of using drones for plant protection is their ability to monitor large areas of crops in a short amount of time. In addition to crop protection management, using drones for augmentative biocontrol facilitates the distribution of beneficial organisms to the exact locations where they are required, which can increase the effectiveness of biocontrol agents while reducing distribution costs. In this context, given the very limited commercial use of drones in the Western Balkans’ agri-food sector, the use of drones in the agri-food industry is a topic that needs to be elaborated on and highly promoted. Additionally, the specific legal regulations in Serbia that currently limit the use of drones in agriculture must be outlined. Conventional crop production is still significantly more prevalent in Serbia, but given the region’s continuous technological progress, there is no doubt that farmers’ education and future investments in precision agriculture will most likely increase the use of state-of-the-art technologies and drones in agriculture.
Open AccessDrone-Related Agrotechnologies for Precise Plant Protection in Western Balkans: Applications, Possibilities, and Legal Framework Limitations
Modern agriculture necessitates the use of techniques and tools that pollute the environment less and improve the safety of food and feed production. In the field of plant protection, drones are attracting increasing attention due to their versatility and applicability in a variety of environmental and working conditions. Drone crop spraying techniques offer several advantages, including increased safety and cost effectiveness through autonomous and programmed operations based on specific schedules and routes. One of the main advantages of using drones for plant protection is their ability to monitor large areas of crops in a short amount of time. In addition to crop protection management, using drones for augmentative biocontrol facilitates the distribution of beneficial organisms to the exact locations where they are required, which can increase the effectiveness of biocontrol agents while reducing distribution costs. In this context, given the very limited commercial use of drones in the Western Balkans’ agri-food sector, the use of drones in the agri-food industry is a topic that needs to be elaborated on and highly promoted. Additionally, the specific legal regulations in Serbia that currently limit the use of drones in agriculture must be outlined. Conventional crop production is still significantly more prevalent in Serbia, but given the region’s continuous technological progress, there is no doubt that farmers’ education and future investments in precision agriculture will most likely increase the use of state-of-the-art technologies and drones in agriculture.
- Open Access
The Biochemical Response of Soybean Cultivars Infected by Diaporthe Species Complex
Oxidative stress in soybean plants infected with Diaporthe isolates was evaluated in order to select (1) the least aggressive inoculation method, (2) to determine the most aggressive Diaporthe isolate, and (3) to determine the most tolerant soybean cultivar to this isolate. Based on the present malondialdehyde (MDA) content, the main end product of the lipid peroxidation process, and the biomarker for oxidative stress, the mycelium contact method was chosen as the least aggressive inoculation method, compared to the toothpick method and plug method. The activity of the antioxidant enzymes (superoxide–dismutase (SOD), catalase (CAT), and peroxidase (PX)), the reduced glutathione (GSH) content, and the level of lipid peroxidation (LP) were measured in soybean cv. Sava infected by five different Diaporthe species (DPM1F—D. aspalathi, DPC/KR19—D. caulivora, DPC004NY15—D. eres, 18-DIA-SOY-14—D. gulyae, and PL157A—D. longicolla). The most pathogenic Diaporthe species to cv. Sava was D. eres. The screening of the antioxidant enzymes activity in the leaves of 12 different soybean cultivars (Altona, Atlas, Capital, Chico, CX134, Favorit, Lakota, McCall, Morsoy, Strain, Rubin, and Victoria) infected with D. eres by the mycelium contact inoculation method showed that Capital, McCall, and Morsoy were the cultivars with the highest tolerance to D. eres, followed by Chico, Favorit, Lakota, and Rubin. The most sensitive cultivars were Atlas, CX134, Victoria, and Strain.
Open AccessThe Biochemical Response of Soybean Cultivars Infected by Diaporthe Species Complex
Oxidative stress in soybean plants infected with Diaporthe isolates was evaluated in order to select (1) the least aggressive inoculation method, (2) to determine the most aggressive Diaporthe isolate, and (3) to determine the most tolerant soybean cultivar to this isolate. Based on the present malondialdehyde (MDA) content, the main end product of the lipid peroxidation process, and the biomarker for oxidative stress, the mycelium contact method was chosen as the least aggressive inoculation method, compared to the toothpick method and plug method. The activity of the antioxidant enzymes (superoxide–dismutase (SOD), catalase (CAT), and peroxidase (PX)), the reduced glutathione (GSH) content, and the level of lipid peroxidation (LP) were measured in soybean cv. Sava infected by five different Diaporthe species (DPM1F—D. aspalathi, DPC/KR19—D. caulivora, DPC004NY15—D. eres, 18-DIA-SOY-14—D. gulyae, and PL157A—D. longicolla). The most pathogenic Diaporthe species to cv. Sava was D. eres. The screening of the antioxidant enzymes activity in the leaves of 12 different soybean cultivars (Altona, Atlas, Capital, Chico, CX134, Favorit, Lakota, McCall, Morsoy, Strain, Rubin, and Victoria) infected with D. eres by the mycelium contact inoculation method showed that Capital, McCall, and Morsoy were the cultivars with the highest tolerance to D. eres, followed by Chico, Favorit, Lakota, and Rubin. The most sensitive cultivars were Atlas, CX134, Victoria, and Strain.
- Open Access
Development of a Predictive Model of the Flight Dynamics of the European Corn Borer, Ostrinia nubilalis Hübner, 1796 (Lepidoptera: Pyralidae), in the Vojvodina Region, Serbia—Implications for Integrated Pest Management
Although corn production is affected by several harmful insects, its most important pest in the southeastern region of Europe is the European corn borer (ECB), Ostrinia nubilalis Hübner, 1796 (Lepidoptera: Pyralidae). Chemical control of O. nubilalis remains the main strategy in conventional corn production. The key to successfully achieving a high efficiency of insecticides is determining the appropriate moment of application, including the exact time in the insect’s life cycle when it is most vulnerable. In this study, monitoring data on the flight dynamics of ECB adults from a seven-year period (2014–2020) were exploited for the development of a predictive model of adult numbers within the growing season. ECB monitoring was performed by using light traps at 15 different locations in the Vojvodina region (Serbia) during the specified time period. First, the calendar for Vojvodina was created based on the analytics of the collected monitoring data. Additionally, the calendar was converted to the probability of ECB occurrence during the growing season, specifying the time interval between the appearance of each generation of the pest. Second, using machine learning techniques, a phenological model was designed that included daily values of relevant meteorological features, such as cumulative degree-days, relative humidity, and precipitation. The calendar had a lower prediction error when compared to the phenological model, and it was tested as a supporting management tool for the ECB in 2021, with a root-mean-square error of the number of adults of 46.67. Such an approach could significantly reduce both the consumption of insecticides and the number of chemical treatments, respectively. Above all, this approach has broad potential in IPM and organic farming, and it is fully compatible with biological control methods.
Open AccessDevelopment of a Predictive Model of the Flight Dynamics of the European Corn Borer, Ostrinia nubilalis Hübner, 1796 (Lepidoptera: Pyralidae), in the Vojvodina Region, Serbia—Implications for Integrated Pest Management
Although corn production is affected by several harmful insects, its most important pest in the southeastern region of Europe is the European corn borer (ECB), Ostrinia nubilalis Hübner, 1796 (Lepidoptera: Pyralidae). Chemical control of O. nubilalis remains the main strategy in conventional corn production. The key to successfully achieving a high efficiency of insecticides is determining the appropriate moment of application, including the exact time in the insect’s life cycle when it is most vulnerable. In this study, monitoring data on the flight dynamics of ECB adults from a seven-year period (2014–2020) were exploited for the development of a predictive model of adult numbers within the growing season. ECB monitoring was performed by using light traps at 15 different locations in the Vojvodina region (Serbia) during the specified time period. First, the calendar for Vojvodina was created based on the analytics of the collected monitoring data. Additionally, the calendar was converted to the probability of ECB occurrence during the growing season, specifying the time interval between the appearance of each generation of the pest. Second, using machine learning techniques, a phenological model was designed that included daily values of relevant meteorological features, such as cumulative degree-days, relative humidity, and precipitation. The calendar had a lower prediction error when compared to the phenological model, and it was tested as a supporting management tool for the ECB in 2021, with a root-mean-square error of the number of adults of 46.67. Such an approach could significantly reduce both the consumption of insecticides and the number of chemical treatments, respectively. Above all, this approach has broad potential in IPM and organic farming, and it is fully compatible with biological control methods.
- Open Access
- 14 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (14) , 8598
Phenotypic Variability of Wheat and Environmental Share in Soil Salinity Stress [3S] Conditions
Through choosing bread wheat genotypes that can be cultivated in less productive areas, one can increase the economic worth of those lands, and increase the area under cultivation for this strategic crop. As a result, more food sources will be available for the growing global population. The phenotypic variation of ear mass and grain mass per ear, as well as the genotype × environment interaction, were studied in 11 wheat (Triticum aestivum L.) cultivars and 1 triticale (Triticosecale W.) cultivar grown under soil salinity stress (3S) during three vegetation seasons. The results of the experiment set on the control variant (solonetz) were compared to the results obtained from soil reclaimed by phosphogypsum in the amount of 25 t × ha−1 and 50 t × ha−1. Using the AMMI analysis of variance, there was found to be a statistically significant influence of additive and non-additive sources of variation on the phenotypic variation of the analyzed traits. Although the local landrace Banatka and the old variety Bankut 1205 did not have high enough genetic capacity to exhibit high values of ear mass, they were well-adapted to 3S. The highest average values of grain mass per ear and the lowest average values of the coefficient of variation were obtained in all test variants under microclimatic condition B. On soil reclaimed by 25 t × ha−1 and 50 t × ha−1 of phosphogypsum, in microclimate C, the genotypes showed the highest stability. The most stable genotypes were Rapsodija and Renesansa. Under 3S, genotype Simonida produced one of the most stable reactions for grain mass per ear.
- 14 July 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (14) , 8598
Open AccessPhenotypic Variability of Wheat and Environmental Share in Soil Salinity Stress [3S] Conditions
Through choosing bread wheat genotypes that can be cultivated in less productive areas, one can increase the economic worth of those lands, and increase the area under cultivation for this strategic crop. As a result, more food sources will be available for the growing global population. The phenotypic variation of ear mass and grain mass per ear, as well as the genotype × environment interaction, were studied in 11 wheat (Triticum aestivum L.) cultivars and 1 triticale (Triticosecale W.) cultivar grown under soil salinity stress (3S) during three vegetation seasons. The results of the experiment set on the control variant (solonetz) were compared to the results obtained from soil reclaimed by phosphogypsum in the amount of 25 t × ha−1 and 50 t × ha−1. Using the AMMI analysis of variance, there was found to be a statistically significant influence of additive and non-additive sources of variation on the phenotypic variation of the analyzed traits. Although the local landrace Banatka and the old variety Bankut 1205 did not have high enough genetic capacity to exhibit high values of ear mass, they were well-adapted to 3S. The highest average values of grain mass per ear and the lowest average values of the coefficient of variation were obtained in all test variants under microclimatic condition B. On soil reclaimed by 25 t × ha−1 and 50 t × ha−1 of phosphogypsum, in microclimate C, the genotypes showed the highest stability. The most stable genotypes were Rapsodija and Renesansa. Under 3S, genotype Simonida produced one of the most stable reactions for grain mass per ear.
- 3 June 2021
- Published by Taylor & Francis in Acta Agriculturae Scandinavica, Section B — Soil & Plant Science
- Vol. 71 (8) , 667-673
Technological quality traits phenotyping of Camelina across multienvironment trials
Camelina (Camelina sativa [L.] Crtz.) is an oilseed crop of the Brassicaceae family. It represents revived crops, which was reintroduced to contribute in diversification of the used crops. Field trials were set in a total of five different locations across four years in which in Serbia (2015/2016, 2016/2017, 2017/2018, 2018/2019) and in Austria (2016/2017). In all samples, 12 different environments were processed. Analysis of the distributions of environments for oil content, which mirrored protein content, using the PCA analysis, shows a statistical significance of the first two main components, which participated in the phenotypic variation with a larger amount to additive component and with both axes having a statistically significant effect on the interaction. The first two main components jointly explained more than 80% of the variation in two traits. The statistical significance of the remainder is a consequence of an agronomically explicable variation. The genotypes NS Zlatka and NS Slatka, used in this study, come from elite breeding material that is engineered to provide a consistent return to the producer regardless of the amount of money invested in primary agricultural production. Incorporating these varieties into the crop rotation would broaden the range of species available in Balkan agriculture.
- 3 June 2021
- Published by Taylor & Francis in Acta Agriculturae Scandinavica, Section B — Soil & Plant Science
- Vol. 71 (8) , 667-673
Technological quality traits phenotyping of Camelina across multienvironment trials
Camelina (Camelina sativa [L.] Crtz.) is an oilseed crop of the Brassicaceae family. It represents revived crops, which was reintroduced to contribute in diversification of the used crops. Field trials were set in a total of five different locations across four years in which in Serbia (2015/2016, 2016/2017, 2017/2018, 2018/2019) and in Austria (2016/2017). In all samples, 12 different environments were processed. Analysis of the distributions of environments for oil content, which mirrored protein content, using the PCA analysis, shows a statistical significance of the first two main components, which participated in the phenotypic variation with a larger amount to additive component and with both axes having a statistically significant effect on the interaction. The first two main components jointly explained more than 80% of the variation in two traits. The statistical significance of the remainder is a consequence of an agronomically explicable variation. The genotypes NS Zlatka and NS Slatka, used in this study, come from elite breeding material that is engineered to provide a consistent return to the producer regardless of the amount of money invested in primary agricultural production. Incorporating these varieties into the crop rotation would broaden the range of species available in Balkan agriculture.
- Open Access
Yield-Related Traits of 20 Spring Camelina Genotypes Grown in a Multi-Environment Study in Serbia
Camelina sativa (L.) Crantz is one of the oldest oilseed crops in Europe. Over the last twenty years, it has reemerged as a very promising alternative oilseed crop. Camelina has broad environmental adaptability, a wide range of resistances to pests and diseases, low-input requirements, and multiple industrial and feed applications exist for its seed oil and meal. In a multi-environment study conducted in Serbia, seven yield-related traits, including plant height (PH), height to the first branch (HFB), number of lateral branches (NLB), number of seed capsules per plant (NSCP), number of seeds per plant (NSP), mass of seeds per plant (MSP), and the total percentage of oil in the seed (TPOS), were analyzed in 20 spring camelina accessions. The combination of two years, two locations, and two sowing dates (autumn and spring) resulted in eight different environments across which the performance of the accessions was evaluated. The aims of the study were (a) to provide a phenotypic characterization and performance evaluation of the camelina accessions, (b) to identify correlations between the selected traits, and (c) to determine the effect of environmental factors on the traits. Environments contributed to the largest proportion in the total variance, explaining approximately 90% of the variance for all traits, except for NLB (70.96%) and TPOS (42.56%). The additive main effects and multiplicative interaction model (AMMI) showed that the weather conditions, and seeding dates were the most influential environmental factor. Location had a minor to moderate effect on the investigated traits. Lines CK3X-7 and Maksimir had the highest seed yields, and CK2X–9 and CJ11X–43 had the highest seed oil contents. All four lines had good adaptability and yield stability, making them the most suitable candidates for cultivation in the environmental conditions of Serbia in southeastern Europe. The present results reveal a potential for developing higher-yielding camelina cultivars with increased seed oil content and improved adaptability to various environmental conditions.
Open AccessYield-Related Traits of 20 Spring Camelina Genotypes Grown in a Multi-Environment Study in Serbia
Camelina sativa (L.) Crantz is one of the oldest oilseed crops in Europe. Over the last twenty years, it has reemerged as a very promising alternative oilseed crop. Camelina has broad environmental adaptability, a wide range of resistances to pests and diseases, low-input requirements, and multiple industrial and feed applications exist for its seed oil and meal. In a multi-environment study conducted in Serbia, seven yield-related traits, including plant height (PH), height to the first branch (HFB), number of lateral branches (NLB), number of seed capsules per plant (NSCP), number of seeds per plant (NSP), mass of seeds per plant (MSP), and the total percentage of oil in the seed (TPOS), were analyzed in 20 spring camelina accessions. The combination of two years, two locations, and two sowing dates (autumn and spring) resulted in eight different environments across which the performance of the accessions was evaluated. The aims of the study were (a) to provide a phenotypic characterization and performance evaluation of the camelina accessions, (b) to identify correlations between the selected traits, and (c) to determine the effect of environmental factors on the traits. Environments contributed to the largest proportion in the total variance, explaining approximately 90% of the variance for all traits, except for NLB (70.96%) and TPOS (42.56%). The additive main effects and multiplicative interaction model (AMMI) showed that the weather conditions, and seeding dates were the most influential environmental factor. Location had a minor to moderate effect on the investigated traits. Lines CK3X-7 and Maksimir had the highest seed yields, and CK2X–9 and CJ11X–43 had the highest seed oil contents. All four lines had good adaptability and yield stability, making them the most suitable candidates for cultivation in the environmental conditions of Serbia in southeastern Europe. The present results reveal a potential for developing higher-yielding camelina cultivars with increased seed oil content and improved adaptability to various environmental conditions.