Jonathan W. Peterson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jonathan W. Peterson has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Michael D. Seymour
Professor of Chemistry, Dept. of Chemistry, Hope College, P.O. Box 9000, Holland, MI 49422-9000
7 shared publicationsHope College
3 shared publicationsAmanda B. Schuiling
2 shared publications- Baohua Gu
Environmental Sciences Division, Oak Ridge National Laboratory, Oak Ridge, USA
2 shared publications Laura J. Petrasky
Undergraduate Student, Dept. of Engineering, Hope College, P.O. Box 9000, Holland, MI 49422-9000
2 shared publicationsMcKenzie L. Stock
2 shared publications
Latest Publications
- 1 November 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 147 (11) , 04021046
Reconnaissance Study on Adsorption of Pharmaceuticals and Personal Care Products to Managed Turf Soils and Associated Oxide Nanoparticles
The use of greywater or treated wastewater for the irrigation of public greenspaces and athletic fields is becoming a management strategy in water conservation. Water may contain pharmaceuticals and personal care products (PPCPs), as well as oxide nanoparticles (NPs), because these compounds have been detected in sediment-freshwater systems and soils. This study investigated interactions between PPCPs and NPs by batch adsorption experiments using five soil-associated NPs ( , MgO, , , and CaO), one common anthropogenic NP ( ), fine ( ) fractions of athletic field soils, and seven PPCPs: salicylic acid, propranolol, carbamazepine, bisphenol A, diclofenac, caffeine, and ibuprofen. Results indicated that some sorption can be determined by the net surface charge of the oxide NP or the composite mineralogy of the soil fines, and the overall charge of the attendant PPCPs, over the pH range of the experiments ( ). However, adsorption of several drug–substrate pairs was not explained by net surface charge attraction or repulsion, and data indicated that more-complex adsorption mechanisms are operative in water–soil systems containing the relatively hydrophilic PPCPs investigated.- 1 November 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 147 (11) , 04021046
Reconnaissance Study on Adsorption of Pharmaceuticals and Personal Care Products to Managed Turf Soils and Associated Oxide Nanoparticles
The use of greywater or treated wastewater for the irrigation of public greenspaces and athletic fields is becoming a management strategy in water conservation. Water may contain pharmaceuticals and personal care products (PPCPs), as well as oxide nanoparticles (NPs), because these compounds have been detected in sediment-freshwater systems and soils. This study investigated interactions between PPCPs and NPs by batch adsorption experiments using five soil-associated NPs ( , MgO, , , and CaO), one common anthropogenic NP ( ), fine ( ) fractions of athletic field soils, and seven PPCPs: salicylic acid, propranolol, carbamazepine, bisphenol A, diclofenac, caffeine, and ibuprofen. Results indicated that some sorption can be determined by the net surface charge of the oxide NP or the composite mineralogy of the soil fines, and the overall charge of the attendant PPCPs, over the pH range of the experiments ( ). However, adsorption of several drug–substrate pairs was not explained by net surface charge attraction or repulsion, and data indicated that more-complex adsorption mechanisms are operative in water–soil systems containing the relatively hydrophilic PPCPs investigated.- Open Access
- 28 April 2021
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 193 (5) , 1-18
A global reconnaissance of particulates and metals/metalloids in untreated drinking water sources
Metal and metalloid contamination in drinking water sources is a global concern, particularly in developing countries. This study used hollow membrane water filters and metal-capturing polyurethane foams to sample 71 drinking water sources in 22 different countries. Field sampling was performed with sampling kits prepared in the lab at Hope College in Holland, MI, USA. Filters and foams were sent back to the lab after sampling, and subsequent analysis of flushates and rinsates allowed the estimation of suspended solids and metal and other analayte concentrations in source waters. Estimated particulate concentrations were 0–92 mg/L, and consisted of quartz, feldspar, and clay, with some samples containing metal oxides or sulfide phases. As and Cu were the only analytes which occurred above the World Health Organization (WHO) guidelines of 10 μg/L and 2000 μg/L, respectively, with As exceeding the guideline in 45% of the sources and Cu in 3%. Except for one value of ~ 285 μg/L, As concentrations were 45–200 μg/L (river), 65–179 μg/L (well), and 112–178 μg/L (tap). Other metals (Ce, Fe, Mg, Mn, Zn) with no WHO guideline were also detected, with Mn the most common. This study demonstrated that filters and foams can be used for reconnaissance characterization of untreated drinking water. However, estimated metal and other analyte concentrations could only be reported as minimum values due to potential incomplete retrieval of foam-bound analytes. A qualitative reporting methodology was used to report analytes as “present” if the concentration was below the WHO guideline, and “present-recommend retesting” if the concentration was quantifiable and above the WHO guideline.
- 28 April 2021
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 193 (5) , 1-18
Open AccessA global reconnaissance of particulates and metals/metalloids in untreated drinking water sources
Metal and metalloid contamination in drinking water sources is a global concern, particularly in developing countries. This study used hollow membrane water filters and metal-capturing polyurethane foams to sample 71 drinking water sources in 22 different countries. Field sampling was performed with sampling kits prepared in the lab at Hope College in Holland, MI, USA. Filters and foams were sent back to the lab after sampling, and subsequent analysis of flushates and rinsates allowed the estimation of suspended solids and metal and other analayte concentrations in source waters. Estimated particulate concentrations were 0–92 mg/L, and consisted of quartz, feldspar, and clay, with some samples containing metal oxides or sulfide phases. As and Cu were the only analytes which occurred above the World Health Organization (WHO) guidelines of 10 μg/L and 2000 μg/L, respectively, with As exceeding the guideline in 45% of the sources and Cu in 3%. Except for one value of ~ 285 μg/L, As concentrations were 45–200 μg/L (river), 65–179 μg/L (well), and 112–178 μg/L (tap). Other metals (Ce, Fe, Mg, Mn, Zn) with no WHO guideline were also detected, with Mn the most common. This study demonstrated that filters and foams can be used for reconnaissance characterization of untreated drinking water. However, estimated metal and other analyte concentrations could only be reported as minimum values due to potential incomplete retrieval of foam-bound analytes. A qualitative reporting methodology was used to report analytes as “present” if the concentration was below the WHO guideline, and “present-recommend retesting” if the concentration was quantifiable and above the WHO guideline.
- 1 May 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 142 (5)
Laboratory Investigation of Antibiotic Interactions with Fe2O3 Nanoparticles in Water
The movement and degradation of drugs in soil and water environments are related to surface interactions with oxide nanoparticles. These nanoparticles could be stationary substrates or suspended in aqueous solution. In this study, different pH solutions of the common antibiotic ampicillin (AMP) were mixed with ≤50-nm Fe2O3 (maghemite) particles. Both sorption and breakdown of AMP were observed. For initial drug concentrations from ∼3 μM to 2.9 mM, the overall AMP removal from solution can be described by linear isotherms with removal coefficients (Kr) of 394 (±43) L kg−1 at pH 2, 551 (±37) L kg−1 at pH 6, and 256 (±37) L kg−1 at pH 8. At pH 4, AMP removal can be described by a Freundlich isotherm of log Kf=3.27 (±0.19) and n=0.57 (±0.15). AMP solutions were separated from maghemite nanoparticles after mixing and analyzed by liquid chromatography/mass spectroscopy (LC/MS) techniques, resulting in the detection of penicilloic and penilloic acid breakdown products.
- 1 May 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 142 (5)
Laboratory Investigation of Antibiotic Interactions with Fe2O3 Nanoparticles in Water
The movement and degradation of drugs in soil and water environments are related to surface interactions with oxide nanoparticles. These nanoparticles could be stationary substrates or suspended in aqueous solution. In this study, different pH solutions of the common antibiotic ampicillin (AMP) were mixed with ≤50-nm Fe2O3 (maghemite) particles. Both sorption and breakdown of AMP were observed. For initial drug concentrations from ∼3 μM to 2.9 mM, the overall AMP removal from solution can be described by linear isotherms with removal coefficients (Kr) of 394 (±43) L kg−1 at pH 2, 551 (±37) L kg−1 at pH 6, and 256 (±37) L kg−1 at pH 8. At pH 4, AMP removal can be described by a Freundlich isotherm of log Kf=3.27 (±0.19) and n=0.57 (±0.15). AMP solutions were separated from maghemite nanoparticles after mixing and analyzed by liquid chromatography/mass spectroscopy (LC/MS) techniques, resulting in the detection of penicilloic and penilloic acid breakdown products.
- 1 November 2015
- Published by Elsevier in Science of The Total Environment
- Vol. 532, 398-403
Surface interactions and degradation of a fluoroquinolone antibiotic in the dark in aqueous TiO2 suspensions
- 1 November 2015
- Published by Elsevier in Science of The Total Environment
- Vol. 532, 398-403
Surface interactions and degradation of a fluoroquinolone antibiotic in the dark in aqueous TiO2 suspensions
- 1 January 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 140 (1) , 40-47
Effects of Added Fe°, Fe3O4, and Fe2O3 on Sorption of Cephalosporin Antibiotic in Quartz-Rich Sands
Batch experiments were performed to evaluate sorption of zwitterionic and anionic cephapirin (CHP° and , respectively), a cephalosporin antibiotic, in two quartz-rich sands spiked with iron (0.5–5% by weight). Sand A was approximately 65% quartz and 29% feldspar, with a grain diameter of 0.11 mm. Sand B was approximately 97% quartz and approximately 2% feldspar with a grain diameter of 0.39 mm. Bulk CHP sorption was evaluated relative to four added iron phases, namely, Fe° [zero-valent iron (ZVI)], (magnetite), and two forms of (dull and specular hematite). Iron-particle sizes matched the respective sands to which they were added. Experiments were performed at two temperatures (21 and 39°C) and the results were compared with CHP sorption in unspiked sands. Maximum sorption occurred in Sand B and was approximately of spiked sand for initial aqueous CHP concentrations of 5–50 ppm, at 39°C and pH 5. Addition of ZVI caused the largest increase in CHP sorption with distribution coefficients () nearly 12 times those of ZVI-free sands. The study results imply the potential use of microscale ZVI, and to a lesser extent iron oxides, in the remediation of cephalosporin-contaminated groundwater and soil.- 1 January 2014
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 140 (1) , 40-47
Effects of Added Fe°, Fe3O4, and Fe2O3 on Sorption of Cephalosporin Antibiotic in Quartz-Rich Sands
Batch experiments were performed to evaluate sorption of zwitterionic and anionic cephapirin (CHP° and , respectively), a cephalosporin antibiotic, in two quartz-rich sands spiked with iron (0.5–5% by weight). Sand A was approximately 65% quartz and 29% feldspar, with a grain diameter of 0.11 mm. Sand B was approximately 97% quartz and approximately 2% feldspar with a grain diameter of 0.39 mm. Bulk CHP sorption was evaluated relative to four added iron phases, namely, Fe° [zero-valent iron (ZVI)], (magnetite), and two forms of (dull and specular hematite). Iron-particle sizes matched the respective sands to which they were added. Experiments were performed at two temperatures (21 and 39°C) and the results were compared with CHP sorption in unspiked sands. Maximum sorption occurred in Sand B and was approximately of spiked sand for initial aqueous CHP concentrations of 5–50 ppm, at 39°C and pH 5. Addition of ZVI caused the largest increase in CHP sorption with distribution coefficients () nearly 12 times those of ZVI-free sands. The study results imply the potential use of microscale ZVI, and to a lesser extent iron oxides, in the remediation of cephalosporin-contaminated groundwater and soil.- 1 May 2012
- Published by Elsevier in Chemosphere
- Vol. 87 (8) , 911-917
Adsorption and breakdown of penicillin antibiotic in the presence of titanium oxide nanoparticles in water
- 1 May 2012
- Published by Elsevier in Chemosphere
- Vol. 87 (8) , 911-917
Adsorption and breakdown of penicillin antibiotic in the presence of titanium oxide nanoparticles in water
- 1 September 2010
- Published by Elsevier in Chemosphere
- Vol. 80 (11) , 1268-1273
Experimental determination of ampicillin adsorption to nanometer-size Al2O3 in water
- 1 September 2010
- Published by Elsevier in Chemosphere
- Vol. 80 (11) , 1268-1273
Experimental determination of ampicillin adsorption to nanometer-size Al2O3 in water