Tiean Zhou

Soil salinity is a major abiotic stressor that constrains plant growth and development, yet the coordinated regulatory mechanisms underlying salt stress impacts on plant cell mechanical properties and the cytoskeleton remain elusive. In this study, tobacco suspension cells were employed as a model system. Combining mechanical measurements, fluorescence microscopy imaging, and bright-field morphological observation, we systematically characterized the dynamic response patterns of cell-generated surface stress (ΔS), cell viscoelastic index (CVI), microfilament cytoskeleton structure, as well as cell morphology and plasmolysis under NaCl stress ranging from 50 to 150 mmol/L. The results revealed three distinct response thresholds: 50 mmol/L NaCl treatment induced only transient ΔS fluctuations and mild plasmolysis, with no significant changes in CVI or microfilament fluorescence intensity, suggesting a safe tolerance threshold. The 75–100 mmol/L NaCl treatments triggered reversible “rise–recovery” mechanical responses in ΔS and CVI. The microfilament cytoskeleton showed minor structural adjustments, and plasmolysis increased gradually but remained reversible, defining this range as a reversible acclimation phase. The 125–150 mmol/L NaCl treatment caused an irreversible decline in ΔS (with a sharp instantaneous drop at 150 mmol/L). CVI variations diminished and stabilized after 6 h. The microfilament cytoskeleton suffered progressive disruption, as fluorescence intensity dropped to 1% of the control group at 150 mmol/L, accompanied by severe plasmolysis and protoplast shrinkage, indicating irreversible cellular damage. These findings demonstrate a concentration-dependent gradient effect of NaCl stress, highlighting tight coordination between mechanical properties, cytoskeletal integrity, and morphological adaptation. This work provides critical cytological insights into the molecular regulation of plant salt stress responses.

Various high-throughput screening methods have been developed to explore plant phenotypes, primarily at the organ and whole plant levels. There is a need to develop phenomics methods at the cellular level to narrow down the genotype to phenotype gap. This study used double-resonator piezoelectric cytometry biosensors to capture the dynamic changes in mechanical phenotypes of living cells of two rice species, drought-resistant Lvhan No. 1 and drought-sensitive 6527, under PEG6000 drought stress. In rice cells of Lvhan No. 1 and 6527, mechanomics parameters, including cell-generated surface stress (ΔS) and viscoelastic parameters (G′, G″, G″/G′), were measured and compared under 5–25% PEG6000. Lvhan No. 1 showed larger viscoelastic but smaller surface stress changes with the same concentration of PEG6000. Moreover, Lvhan No. 1 cells showed better wall–plasma membrane–cytoskeleton continuum structure maintaining ability under drought stress, as proven by transient tension stress (ΔS > 0) and linear G′~ΔS, G″~ΔS relations at higher 15–25% PEG6000, but not for 6527 cells. Additionally, two distinct defense and drought resistance mechanisms were identified through dynamic G″/G′ responses: (i) transient hardening followed by softening recovery under weak drought, and (ii) transient softening followed by hardening recovery under strong drought. The abilities of Lvhan No. 1 cells to both recover from transient hardening to softening and to recover from transient softening to hardening are better than those of 6527 cells. Overall, the dynamic mechanomics phenotypic patterns (ΔS, G′, G″, G″/G′, G′~ΔS, G″~ΔS) verified that Lvhan No. 1 has better drought resistance than that of 6527, which is consistent with the field data.

Plant cells’ ability to withstand abiotic stress is strongly linked to modifications in their mechanical characteristics. Nevertheless, the lack of a workable method for consistently tracking plant cells’ mechanical properties severely restricts our comprehension of the mechanical alterations in plant cells under stress. In this study, we used the Double Resonator Piezoelectric Cytometry (DRPC) method to dynamically and non-invasively track changes in the surface stress (ΔS) generated and viscoelasticity (storage modulus G′ and loss modulus G″) of protoplasts and suspension cells of rice under a drought stress of 5–25% PEG6000. The findings demonstrate that rice suspension cells and protoplasts react mechanically differently to 5–15% PEG6000 stress, implying distinct resistance mechanisms. However, neither of them can withstand 25% PEG6000 stress; they respond mechanically similarly to 25% PEG6000 stress. The results of DRPC are further corroborated by the morphological alterations of rice cells and protoplasts observed under an optical microscope. To sum up, the DRPC technique functions as a precise cellular mechanical sensor and offers novel research tools for the evaluation of plant cell adversity and differentiating between the mechanical reactions of cells and protoplasts under abiotic stress.

Plant cells' ability to withstand abiotic stress is strongly linked to modifications in their mechanical characteristics. Nevertheless, the lack of a workable method for consistently tracking plant cell mechanical properties severely restricts our comprehension of the mechanical alterations in plant cells under stress. With Polyethylene Glycol (PEG6000), we created a drought-like environment, and we used the Double Resonator Piezoelectric Cytometry (DRPC) method to dynamically and non-invasively track changes in the stress (ΔS) created and viscoelasticity (storage modulus G' and loss modulus G") of protoplasts and suspension cells of rice during drought stress. The findings demonstrate that, rice suspension cells and protoplasts react mechanically differently to 5%–15% PEG6000 stress, implying distinct resistance mechanisms. However, neither of them can withstand 25% PEG6000 stress, they respond mechanically similarly to 25% PEG6000 stress. The results of DRPC are further corroborated by the morphological alterations of rice cells and protoplasts observed under an optical microscope. To sum up, the DRPC technique functions as a precise cellular mechanical sensor and offers novel research tools for the evaluation of plant cell adversity and differentiating between the mechanical reactions of cells and protoplasts under abiotic stress.

Testing the mechanical properties of cardiomyocytes plays an important role in the study of the physiological and pathological processes of constant contraction and diastole of the cardiovascular system. However, there is currently no satisfactory and dynamic technology to measure the mechanical properties of cardiomyocytes in a sustained manner, greatly affecting their practical application in clinical diagnosis and treatment evaluation. Herein, a double resonator piezoelectric cytometry (DRPC) technique was employed for dynamic monitoring of H9C2 cardiomyocyte adhesion and the effects of two cardiovascular drugs on the contractile properties of H9C2 cardiomyocytes, i.e., isoprenaline (ISO, a positive inotropic agent) and verapamil (VRP, a negative inotropic agent). Specifically, we used 9 MHz AT and BT-cut bare gold and transparent ITO electrodes and compared their dynamic adhesion to the two electrodes modified with RGD and gelatin respectively versus unmodified to measure the cell generated stress (ΔS) exerted on the quartz crystal surface by a population of cells and the cell viscoelastic index (CVI). We found that the DRPC technique can quantitatively measure the magnitude and direction of the generated forces during the adhesion process of the cells and under the effect of drugs. In conclusion, the technique presented in this study can be used for the simultaneous measurement of cell adhesion, traction force and viscoelasticity of living cells in a noninvasive, dynamic and continuous way, making it an ideal tool for assessing the population contractility of cardiomyocytes and evaluating the efficacy and toxicity of cardiovascular drugs.

Cell mechanics is closely associated with cellular structure and function. However, the inability to measure both cellular force and viscoelasticity of statistically significant number of cells noninvasively remains a challenge for quantitative characterizations of various cellular functions and practical applications. Here a double resonator piezoelectric cytometry (DRPC), using AT and BT cut quartz crystals of the same frequency and surface morphology is developed to simultaneously quantify the cells‐generated forces (ΔS) and viscoelastic moduli (G′, G″) of a population of isolated single cells or cells with different degrees of cell‐cell interactions in a non‐invasive and real time manner. DRPC captures the dynamic mechanical parameters ΔS and G′, G″ during the adhesions of human umbilical vein endothelial cells (HUVECs) under different ligand densities of adhesion molecules fibronectin or Arg‐Gly‐Asp (RGD) modified on the gold surfaces of 9 MHz AT and BT cut quartz crystals, and different seeding densities of HUVECs. It is found that both the ligand density and cell seeding density affect the magnitudes of ΔS and G′, G″ and their correlations are revealed for the first time by DRPC. The validity of DRPC is further verified by mechanical changes of the cells in response to treatments with cytoskeleton regulators.

In this study, a double resonator piezoelectric cytometry (DRPC) technology based on quartz crystal microbalance (QCM) was first employed to identify HeLa cell pyroptosis and apoptosis by monitoring cells’ mechanical properties in a real-time and non-invasive manner. AT and BT cut quartz crystals with the same frequency and surface conditions were used concurrently to quantify the cells-exerted surface stress (ΔS). It is the first time that cells-exerted surface stress (ΔS) and cell viscoelasticity have been monitored simultaneously during pyroptosis and apoptosis. The results showed that HeLa pyroptotic cells exerted a tensile stress on quartz crystal along with an increase in the elastic modulus (G′), viscous modulus (G″), and a decrease of the loss tangent (G″/G′), whereas apoptotic cells exerted increasing compressive stress on quartz crystal along with a decrease in G′, G″ and an increase in G″/G′. Furthermore, engineered GSDMD^−/−-DEVD- HeLa cells were used to investigate drug-induced disturbance and testify the mechanical responses during the processes of pyroptosis and non-pyroptosis. These findings demonstrated that the DRPC technology can serve as a precise cytomechanical sensor capable of identifying pyroptosis and apoptosis, providing a novel method in cell death detection and paving the road for pyroptosis and apoptosis related drug evaluation and screening.

Cell mechanics is closely associated with cellular structure and function. However, the inability to measure both cellular force and viscoelasticity of statistically significant number of cells noninvasively remains a challenge for quantitative characterizations of various cellular functions and practical applications. Here a double resonator piezoelectric cytometry (DRPC), using AT and BT cut quartz crystals of the same frequency and surface morphology is developed to simultaneously quantify the cells-generated forces (ΔS) and viscoelastic moduli (G′, G″) of a population of isolated single cells or cells with different degrees of cell-cell interactions in a non-invasive and real time manner. DRPC captures the dynamic mechanical parameters ΔS and G′, G″ during the adhesions of human umbilical vein endothelial cells (HUVECs) under different ligand densities of adhesion molecules fibronectin or Arg-Gly-Asp (RGD) modified on the gold surfaces of 9 MHz AT and BT cut quartz crystals, and different seeding densities of HUVECs. It is found that both the ligand density and cell seeding density affect the magnitudes of ΔS and G′, G″ and their correlations are revealed for the first time by DRPC. The validity of DRPC is further verified by mechanical changes of the cells in response to treatments with cytoskeleton regulators.

The main sensing techniques used to study myocardial pulsation are electrical impedance sensing (EIS) and by quartz crystal microbalance (QCM). While electrical impedance technology is the gold standard for the study of myocardial pulsation, the clinical application of drugs is being followed up in real time additionally, thus, QCM technology needs to be further developed as a very important class of quality sensor technology. Moreover, the application of EIS, in combination with the QCM, for monitoring myocardial pulsation, has been rarely reported. In this paper, a series of cell growth and adhesion conditions were optimized using rat primary cardiomyocytes, and QCM was used in combination with EIS to monitor the adhesion and the myocardial pulsation ability of the cells in real time. Furthermore, cardiomyocytes that adhered to the QCM and EIS were treated with isoprenaline (ISO), a positive inotropic drug, and verapamil (VRP), a negative inotropic drug. Next, the cell index (CI)-time (T) plots, beating amplitude (BA) and beating rate (BR) of the cardiomyocytes were calculated and changes in these parameters, before and after, dosing were evaluated. The results showed that the QCM technique results were not only consistent with the results obtained with EIS, but also that the QCM technique had a certain degree of sensitivity for the calculation of cardiomyocyte beating. Thus, our findings validate the reliability and validity of the QCM technique for measuring cardiomyocyte beating and drug testing. We hope that further studies would evaluate the application of the QCM technology for clinical use.

Quartz crystal microbalance was used to dynamically monitor both the modification and anti-protein adhesion process of an antifouling polymer coating.