Jun Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jun Wang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Junxing Cao
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Chengdu University of Technology, Chengdu 610059, China
9 shared publications Junxing Cao
National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Chengdu University of Technology, Chengdu, China
4 shared publicationsHanqing Xu
2 shared publicationsShan Yuan
2 shared publicationsHong Li
School of Geophysics, Chengdu University of Technology, Chengdu, China
1 shared publicationJingcheng Fu
1 shared publication
Latest Publications
- Open Access
- 16 October 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (20) , 3551
High-Resolution Multiscale Seismic Fracture Prediction via Basis Pursuit Frequency Extension-Enhanced Multi-Attribute Fusion
Fractures are important storage spaces and flow pathways in tight reservoirs, but small-scale fractures with weak seismic responses are difficult to characterize with band-limited post-stack seismic data. This study proposes a high-resolution multiscale seismic method for predicting fracture distribution based on basis pursuit frequency extension (BPFE)-enhanced multi-attribute fusion. BPFE represents each trace sparsely on a wedge dictionary built from a zero-phase Morlet wavelet, which is derived from the average dominant frequency of the data. It then re-synthesizes the basis pursuit denoising solution with a time-compressed wavelet, thereby extending the effective bandwidth without estimating the seismic wavelet. Dip-steered third-generation coherence and ant-tracking attributes are subsequently normalized and fused with explicit weights according to their attribute-sensitive scales, and objective rules are provided for selecting the BPFE parameters. Synthetic tests with known reflectivity show that BPFE reproduces the ideal high-resolution section with correlation coefficients of 0.978 (noise-free) and 0.882 (signal-to-noise ratio of 10 dB). BPFE increases the dominant frequency from 30.8 to 49.3 Hz and reduces the tuning thickness from 16 to 11 ms without systematic phase rotation. At 10 dB, it also raises the area under the receiver operating characteristic curve for detecting weak bed-confined discontinuities from 0.580 to 0.687, outperforming spectral whitening, spiking deconvolution, inverse-Q filtering and sparse-spike inversion in this respect. Applied to the tight sandstone reservoir in the northeastern Sichuan Basin, the workflow delineates main faults, fault-associated fracture zones and small-scale discontinuities more completely than coherence, ant tracking or their fusion without BPFE, which is consistent with the actual geological understanding. The workflow offers a wavelet-estimation-free approach for characterizing weak-response small-scale fractures, although its generalization requires further field validation.
- 16 October 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (20) , 3551
Open AccessHigh-Resolution Multiscale Seismic Fracture Prediction via Basis Pursuit Frequency Extension-Enhanced Multi-Attribute Fusion
Fractures are important storage spaces and flow pathways in tight reservoirs, but small-scale fractures with weak seismic responses are difficult to characterize with band-limited post-stack seismic data. This study proposes a high-resolution multiscale seismic method for predicting fracture distribution based on basis pursuit frequency extension (BPFE)-enhanced multi-attribute fusion. BPFE represents each trace sparsely on a wedge dictionary built from a zero-phase Morlet wavelet, which is derived from the average dominant frequency of the data. It then re-synthesizes the basis pursuit denoising solution with a time-compressed wavelet, thereby extending the effective bandwidth without estimating the seismic wavelet. Dip-steered third-generation coherence and ant-tracking attributes are subsequently normalized and fused with explicit weights according to their attribute-sensitive scales, and objective rules are provided for selecting the BPFE parameters. Synthetic tests with known reflectivity show that BPFE reproduces the ideal high-resolution section with correlation coefficients of 0.978 (noise-free) and 0.882 (signal-to-noise ratio of 10 dB). BPFE increases the dominant frequency from 30.8 to 49.3 Hz and reduces the tuning thickness from 16 to 11 ms without systematic phase rotation. At 10 dB, it also raises the area under the receiver operating characteristic curve for detecting weak bed-confined discontinuities from 0.580 to 0.687, outperforming spectral whitening, spiking deconvolution, inverse-Q filtering and sparse-spike inversion in this respect. Applied to the tight sandstone reservoir in the northeastern Sichuan Basin, the workflow delineates main faults, fault-associated fracture zones and small-scale discontinuities more completely than coherence, ant tracking or their fusion without BPFE, which is consistent with the actual geological understanding. The workflow offers a wavelet-estimation-free approach for characterizing weak-response small-scale fractures, although its generalization requires further field validation.
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-13
Seismic-Print Analysis Enhanced Multiattribute Fusion for Fracture Distribution Prediction in Tight Reservoirs
Predicting fracture development and distribution is crucial in unconventional hydrocarbon exploration and development, especially for sweet spot evaluation and well location optimization in tight reservoirs. Compared to faults, fractures are smaller in scale, have weak seismic reflection signals, and are characterized by irregularity and complexity, making accurate prediction challenging. Conventional fracture prediction methods fail to accurately characterize fracture development zones and their distribution characteristics, which severely restrict the efficient exploration and development of tight reservoirs. To address this limitation, this study proposes a seismic-print analysis-enhanced multiattribute fusion approach for fracture distribution prediction in tight reservoirs. First, considering the inherent consistency between seismic waves and acoustic waves, the voiceprint analysis method from the field of speech recognition is borrowed to perform seismic-print analysis on seismic data to enhance the seismic response characteristics of fractures. On this basis, the gradient structure tensor (GST) algorithm is used to extract stratigraphic dip and azimuth information, and then combined with the eigenvalue coherence algorithm and ant-tracking technique to calculate the coherence and ant-tracking attribute volumes to characterize the fracture characteristics at different scales. Finally, the attribute proportional integration method is employed to integrate the calculated coherence and ant-tracking attribute volumes to predict fracture distribution. The theoretical model validation results show that the proposed method is effective and applicable. The field data application in the Sichuan Basin shows that the fractures predicted by this method are clearer in shape, smaller in scale, and richer in detail, which is consistent with the actual geological understanding. This study provides a novel approach for multiscale fracture prediction in tight reservoirs, which can characterize the fracture distribution at different scales more comprehensively, especially for small fractures with weak seismic response, it can achieve better results than conventional methods.
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-13
Seismic-Print Analysis Enhanced Multiattribute Fusion for Fracture Distribution Prediction in Tight Reservoirs
Predicting fracture development and distribution is crucial in unconventional hydrocarbon exploration and development, especially for sweet spot evaluation and well location optimization in tight reservoirs. Compared to faults, fractures are smaller in scale, have weak seismic reflection signals, and are characterized by irregularity and complexity, making accurate prediction challenging. Conventional fracture prediction methods fail to accurately characterize fracture development zones and their distribution characteristics, which severely restrict the efficient exploration and development of tight reservoirs. To address this limitation, this study proposes a seismic-print analysis-enhanced multiattribute fusion approach for fracture distribution prediction in tight reservoirs. First, considering the inherent consistency between seismic waves and acoustic waves, the voiceprint analysis method from the field of speech recognition is borrowed to perform seismic-print analysis on seismic data to enhance the seismic response characteristics of fractures. On this basis, the gradient structure tensor (GST) algorithm is used to extract stratigraphic dip and azimuth information, and then combined with the eigenvalue coherence algorithm and ant-tracking technique to calculate the coherence and ant-tracking attribute volumes to characterize the fracture characteristics at different scales. Finally, the attribute proportional integration method is employed to integrate the calculated coherence and ant-tracking attribute volumes to predict fracture distribution. The theoretical model validation results show that the proposed method is effective and applicable. The field data application in the Sichuan Basin shows that the fractures predicted by this method are clearer in shape, smaller in scale, and richer in detail, which is consistent with the actual geological understanding. This study provides a novel approach for multiscale fracture prediction in tight reservoirs, which can characterize the fracture distribution at different scales more comprehensively, especially for small fractures with weak seismic response, it can achieve better results than conventional methods.
- Open Access
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 8910-8922
Deep Carbonate Reservoir Hydrocarbon Detection Using Multiseismic Features Constrained Unsupervised Machine Learning
Reservoir hydrocarbon detection is of great interest for reservoir characterization and quality assessment. However, deep carbonate reservoirs exhibit weak seismic response features, making it extremely difficult to extract and utilize reservoir information from seismic data, which leads to significant challenges for seismic based reservoir detection techniques. The sparsity of the labeled samples often limits the application of supervised machine learning for seismic reservoir detection. This study proposes a multiseismic features constrained unsupervised machine learning approach for carbonate reservoir hydrocarbon detection in areas with few or no wells, which combines the multiple reservoir fluid feature extraction methods seismic-print analysis, high-resolution seismic attenuation gradient estimation, seismic dispersion analysis, and prestack simultaneous inversion, as well as advanced unsupervised machine learning isolation forest anomaly detection algorithm, to effectively extract and utilize the implicit reservoir pore fluid information in seismic data. This method jointly uses multiple methods to extract multiseismic data features, which can overcome the problem that using a single method to extract seismic data features cannot fully reflect the reservoir pore fluid information. Using unsupervised machine learning for multisource data feature fusion reservoir hydrocarbon detection can solve the problem that supervised machine learning's requirement for labeled data in deep buried reservoir detection applications cannot be met. Actual field data application show that the hydrocarbon detection results were consistent with the actual geologic understanding, which proves that the presented method is feasible and effective. This study provides a valuable insight and reference for reservoir detection in deep carbonate reservoirs with weak seismic responses.
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 18 (19391404) , 8910-8922
Open AccessDeep Carbonate Reservoir Hydrocarbon Detection Using Multiseismic Features Constrained Unsupervised Machine Learning
Reservoir hydrocarbon detection is of great interest for reservoir characterization and quality assessment. However, deep carbonate reservoirs exhibit weak seismic response features, making it extremely difficult to extract and utilize reservoir information from seismic data, which leads to significant challenges for seismic based reservoir detection techniques. The sparsity of the labeled samples often limits the application of supervised machine learning for seismic reservoir detection. This study proposes a multiseismic features constrained unsupervised machine learning approach for carbonate reservoir hydrocarbon detection in areas with few or no wells, which combines the multiple reservoir fluid feature extraction methods seismic-print analysis, high-resolution seismic attenuation gradient estimation, seismic dispersion analysis, and prestack simultaneous inversion, as well as advanced unsupervised machine learning isolation forest anomaly detection algorithm, to effectively extract and utilize the implicit reservoir pore fluid information in seismic data. This method jointly uses multiple methods to extract multiseismic data features, which can overcome the problem that using a single method to extract seismic data features cannot fully reflect the reservoir pore fluid information. Using unsupervised machine learning for multisource data feature fusion reservoir hydrocarbon detection can solve the problem that supervised machine learning's requirement for labeled data in deep buried reservoir detection applications cannot be met. Actual field data application show that the hydrocarbon detection results were consistent with the actual geologic understanding, which proves that the presented method is feasible and effective. This study provides a valuable insight and reference for reservoir detection in deep carbonate reservoirs with weak seismic responses.
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 20 (1545598X) , 1-5
A Lithology Identification Approach Using Well Logs Data and Convolutional Long Short-Term Memory Networks
Lithology identification plays a crucial role in formation characterization and reservoir exploration. When available core samples are limited, well logs data becomes important in lithology identification. Various machine learning algorithms have been adopted to identify lithology. However, because of the spatial coupling of logging data and the vertical spatial relationship of different depths, the lithology identification of subsurface reservoirs is a challenging task. To solve this challenge, we propose a lithology identification method based on a deep learning model, which combines convolutional neural network (CNN) and long short-term memory (LSTM) network to exert their complementary advantages. In the network mentioned above, the CNN is used to extract the multiscale spatial features of the logging data, whereas the LSTM is designed to extract the vertical spatial relationship from the output features of the CNN, and finally, the mapping relationships between well logs and lithology types are established. The application results of two cases on field datasets demonstrate the effectiveness of the proposed method compared to the benchmark models. The proposed model is expected to be useful for identifying the lithology of complex strata.
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 20 (1545598X) , 1-5
A Lithology Identification Approach Using Well Logs Data and Convolutional Long Short-Term Memory Networks
Lithology identification plays a crucial role in formation characterization and reservoir exploration. When available core samples are limited, well logs data becomes important in lithology identification. Various machine learning algorithms have been adopted to identify lithology. However, because of the spatial coupling of logging data and the vertical spatial relationship of different depths, the lithology identification of subsurface reservoirs is a challenging task. To solve this challenge, we propose a lithology identification method based on a deep learning model, which combines convolutional neural network (CNN) and long short-term memory (LSTM) network to exert their complementary advantages. In the network mentioned above, the CNN is used to extract the multiscale spatial features of the logging data, whereas the LSTM is designed to extract the vertical spatial relationship from the output features of the CNN, and finally, the mapping relationships between well logs and lithology types are established. The application results of two cases on field datasets demonstrate the effectiveness of the proposed method compared to the benchmark models. The proposed model is expected to be useful for identifying the lithology of complex strata.
- 27 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
Spatiotemporal Synergistic Ensemble Deep Learning Method and Its Application to S-Wave Velocity Prediction
S-wave velocity (Vs) data are crucial in prestack seismic inversion, lithology interpretation, and fluid identification. However, most drilling wells currently lack Vs data. The use of traditional data-driven Vs prediction methods has limitations as these methods fail to adaptively extract effective features from logging signals and cannot fully account for the trends with depth. In this letter, we propose a novel spatiotemporal synergistic ensemble deep learning method, that is, the ensemble convolutional bidirectional memory network (ECBMN), to predict Vs. The ECBMN is built by integrating a convolutional neural network and a bidirectional long short-term memory network to leverage their complementary strengths and achieve a spatiotemporal synergistic learning. Using this method, Vs can be estimated from a series of input log data by accounting for the correlation of different log series and Vs, the variation trend, and context information with depth. The results of these applications to field data show that the proposed method can provide more reliable and accurate predictions compared with the existing methods, thereby demonstrating its potential for accurately estimating Vs from log data.
- 27 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 19 (1545598X) , 1-5
Spatiotemporal Synergistic Ensemble Deep Learning Method and Its Application to S-Wave Velocity Prediction
S-wave velocity (Vs) data are crucial in prestack seismic inversion, lithology interpretation, and fluid identification. However, most drilling wells currently lack Vs data. The use of traditional data-driven Vs prediction methods has limitations as these methods fail to adaptively extract effective features from logging signals and cannot fully account for the trends with depth. In this letter, we propose a novel spatiotemporal synergistic ensemble deep learning method, that is, the ensemble convolutional bidirectional memory network (ECBMN), to predict Vs. The ECBMN is built by integrating a convolutional neural network and a bidirectional long short-term memory network to leverage their complementary strengths and achieve a spatiotemporal synergistic learning. Using this method, Vs can be estimated from a series of input log data by accounting for the correlation of different log series and Vs, the variation trend, and context information with depth. The results of these applications to field data show that the proposed method can provide more reliable and accurate predictions compared with the existing methods, thereby demonstrating its potential for accurately estimating Vs from log data.