Xiaoyu Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoyu Shi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Lei Shi
Henan University
2 shared publications Chengwu Jin
School of Electrical Engineering and Electronic Information, Xihua University,Chengdu,P. R. China,610039
1 shared publication- Chun Yin
School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
1 shared publication - Eber J. Ávi̇lA Martínez
Innovac Tecnol Mercado SA CV, San Luis Potosi 78210, Slp, Mexico
1 shared publication - Gen Qiu
School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu, China
1 shared publication - Gen Qiu
School of Automation Engineering, University of Electronic Science and Technology of China, Chengdu, China
1 shared publication
Latest Publications
- 31 July 2026
- Published by Wiley in International Journal of Robust and Nonlinear Control
Robust Fractional‐Order Sliding Mode Control With Practical Finite‐Time Convergence for Constrained Quadrotor UAVs Under Input Saturation
For quadrotor UAV control in the presence of input saturation, state constraints, and system uncertainties, this paper suggests a novel fractional‐order sliding‐mode control technique. Through the employment of a state‐constrained performance function, the proposed approach effectively reduces the numerical instabilities brought on by input saturation and state limits that exist in traditional approaches. Additionally, a fractional‐order sliding surface is used to enable quick practical finite‐time convergence of the system states. In comparison to conventional sliding mode control or integer order techniques, the proposed method not only enhances system robustness and chattering suppression, but it also investigates the practical finite‐time convergence qualities and clearly identifies the convergence boundaries. The simulation findings demonstrate fast convergence and excellent tracking performance, providing significant support for realistic flight control applications.
- 31 July 2026
- Published by Wiley in International Journal of Robust and Nonlinear Control
Robust Fractional‐Order Sliding Mode Control With Practical Finite‐Time Convergence for Constrained Quadrotor UAVs Under Input Saturation
For quadrotor UAV control in the presence of input saturation, state constraints, and system uncertainties, this paper suggests a novel fractional‐order sliding‐mode control technique. Through the employment of a state‐constrained performance function, the proposed approach effectively reduces the numerical instabilities brought on by input saturation and state limits that exist in traditional approaches. Additionally, a fractional‐order sliding surface is used to enable quick practical finite‐time convergence of the system states. In comparison to conventional sliding mode control or integer order techniques, the proposed method not only enhances system robustness and chattering suppression, but it also investigates the practical finite‐time convergence qualities and clearly identifies the convergence boundaries. The simulation findings demonstrate fast convergence and excellent tracking performance, providing significant support for realistic flight control applications.
- 14 June 2025
- Published by Elsevier in Expert Systems with Applications
- Vol. 292
Flocking dynamics for cooperation multi-agent networks subject to intermittent communication
- 14 June 2025
- Published by Elsevier in Expert Systems with Applications
- Vol. 292
Flocking dynamics for cooperation multi-agent networks subject to intermittent communication
- 12 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1427-1432
Robust Fuzzy Adaptive Funnel Control of Flexible Exoskeleton Joints Based on Singular Perturbation Method
This paper focuses on the adaptive funnel control of a flexible exoskeleton joint based on the singular perturbation method. The singular perturbation is used to find the asymptotic solution of a differential equation by decomposing the system into two subsystems. For the fast subsystem, a torque-feedback-based subcontroller is proposed to ensure the suppression of flexible vibration. For the remaining slow subsystem, an improved funnel error transformation is introduced and integrated into the controller design to achieve a specified tracking error performance. Fuzzy logic systems are employed to deal with the nonlinear uncertainties, and an adaptive fuzzy funnel controller is constructed by backstepping method. The simulation results verify the feasibility of the proposed control scheme.
- 12 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1427-1432
Robust Fuzzy Adaptive Funnel Control of Flexible Exoskeleton Joints Based on Singular Perturbation Method
This paper focuses on the adaptive funnel control of a flexible exoskeleton joint based on the singular perturbation method. The singular perturbation is used to find the asymptotic solution of a differential equation by decomposing the system into two subsystems. For the fast subsystem, a torque-feedback-based subcontroller is proposed to ensure the suppression of flexible vibration. For the remaining slow subsystem, an improved funnel error transformation is introduced and integrated into the controller design to achieve a specified tracking error performance. Fuzzy logic systems are employed to deal with the nonlinear uncertainties, and an adaptive fuzzy funnel controller is constructed by backstepping method. The simulation results verify the feasibility of the proposed control scheme.
- 17 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Robust fuzzy controller for helicopter through extended state observer under external perturbation
This article investigated the positional and attitude stability of a helicopter under external interference and parametric uncertainties. Based on Euler-Newton’s theorem, the mathematical model of the system is established, which contains four inputs and six outputs. The input is the speed of the motor, and the output is the attitude and position of the drone. The design of the controller is achieved based on nonlinear fuzzy control and PID control. Due to the coupling between the pitch and the roll angle of the attitude subsystem, the system is divided into two parts, an inner ring and an outer ring. The outer ring realizes the control of altitude and yaw angle, which is independent. The inner loop produces two desired values of the angle as the input to the outer loop. At the same time, this article assumes that there is an upper bound on the disturbance and uncertainty. The extended state observer compensates for the disturbance and uncertainty of the system. Fuzzy inference rules and Radial Basis Function (RBF) functions estimate the parameters of the controller to achieve adaptive adjustment of the system states. Finally, various simulations were carried out in the MATLAB in order to verify the effectiveness of the designed controller. The performance of the proposed controller is examined by simulation, which highlightes the reliability of the controller.
- 17 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Robust fuzzy controller for helicopter through extended state observer under external perturbation
This article investigated the positional and attitude stability of a helicopter under external interference and parametric uncertainties. Based on Euler-Newton’s theorem, the mathematical model of the system is established, which contains four inputs and six outputs. The input is the speed of the motor, and the output is the attitude and position of the drone. The design of the controller is achieved based on nonlinear fuzzy control and PID control. Due to the coupling between the pitch and the roll angle of the attitude subsystem, the system is divided into two parts, an inner ring and an outer ring. The outer ring realizes the control of altitude and yaw angle, which is independent. The inner loop produces two desired values of the angle as the input to the outer loop. At the same time, this article assumes that there is an upper bound on the disturbance and uncertainty. The extended state observer compensates for the disturbance and uncertainty of the system. Fuzzy inference rules and Radial Basis Function (RBF) functions estimate the parameters of the controller to achieve adaptive adjustment of the system states. Finally, various simulations were carried out in the MATLAB in order to verify the effectiveness of the designed controller. The performance of the proposed controller is examined by simulation, which highlightes the reliability of the controller.
- Open Access
- 16 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 61710-61720
An Improved Bearing Fault Diagnosis Scheme Based on Hierarchical Fuzzy Entropy and Alexnet Network
Bearings are important part of aerospace equipments. Therefore, bearings fault diagnosis and fault detection is necessary for the safe operation. Generally, the bearing are core component and runs in a complex and heavy background noise environment. Thence, the bearing signals will be overwhelmed by noise. At present, the diagnosis methods of bearings are based on the experience of experts which costs a lot of labor and time-consuming. Consequently, to address these inadequacies, a novel method based on variational mode decomposition (VMD) algorithms and Alexnet neural network has been presented. Firstly, it decomposes the nonstationary bearing signals into intrinsic mode functions adaptively. However, background noise will seriously affect the number of signal decompositions and reduce accuracy even over-decomposition. Thence, this paper proposed the hierarchical fuzzy entropy method to adaptively extract weak fault characteristics of bearings. Then Alexnet neural network has been utilized to learn the relationship of fault features and bearings health conditions. The architecture of Alexnet diagnosis model is convenient and efficient. Finally, two tentative dataset are adopted to verify the effectiveness and feasibility of the method proposed in this article. The results show that the presented method has a higher fault diagnosis accuracy rate than traditional convolutional neural networks.
- 16 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 61710-61720
Open AccessAn Improved Bearing Fault Diagnosis Scheme Based on Hierarchical Fuzzy Entropy and Alexnet Network
Bearings are important part of aerospace equipments. Therefore, bearings fault diagnosis and fault detection is necessary for the safe operation. Generally, the bearing are core component and runs in a complex and heavy background noise environment. Thence, the bearing signals will be overwhelmed by noise. At present, the diagnosis methods of bearings are based on the experience of experts which costs a lot of labor and time-consuming. Consequently, to address these inadequacies, a novel method based on variational mode decomposition (VMD) algorithms and Alexnet neural network has been presented. Firstly, it decomposes the nonstationary bearing signals into intrinsic mode functions adaptively. However, background noise will seriously affect the number of signal decompositions and reduce accuracy even over-decomposition. Thence, this paper proposed the hierarchical fuzzy entropy method to adaptively extract weak fault characteristics of bearings. Then Alexnet neural network has been utilized to learn the relationship of fault features and bearings health conditions. The architecture of Alexnet diagnosis model is convenient and efficient. Finally, two tentative dataset are adopted to verify the effectiveness and feasibility of the method proposed in this article. The results show that the presented method has a higher fault diagnosis accuracy rate than traditional convolutional neural networks.