Muhammad Sajjad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Muhammad Sajjad has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Muhammad Kamran
Center For Carbon‐Neutrality Catalysis and Engineering Institute of Carbon‐Neutral Technology and Shenzhen Public Service Platform For Carbon Capture, Utilization and Storage Technology Shenzhen Polytechnic University Shenzhen P. R. China
3 shared publicationsSalman Qadir
Center For Carbon‐Neutrality Catalysis and Engineering Institute of Carbon‐Neutral Technology and Shenzhen Public Service Platform For Carbon Capture, Utilization and Storage Technology Shenzhen Polytechnic University Shenzhen P. R. China
3 shared publicationsSivadasan Dharani
Center For Carbon‐Neutrality Catalysis and Engineering Institute of Carbon‐Neutral Technology and Shenzhen Public Service Platform For Carbon Capture, Utilization and Storage Technology Shenzhen Polytechnic University Shenzhen P. R. China
3 shared publicationsKaruppathevan Ramki
Center For Carbon‐Neutrality Catalysis and Engineering Institute of Carbon‐Neutral Technology and Shenzhen Public Service Platform For Carbon Capture, Utilization and Storage Technology Shenzhen Polytechnic University Shenzhen P. R. China
2 shared publicationsShao‐Tao Bai
Center For Carbon‐Neutrality Catalysis and Engineering Institute of Carbon‐Neutral Technology and Shenzhen Public Service Platform For Carbon Capture, Utilization and Storage Technology Shenzhen Polytechnic University Shenzhen P. R. China
2 shared publications- Chunqing Zhang
Department of Polymer Materials College of Chemical Engineering, Dalian University of Technology Dalian China
1 shared publication
Latest Publications
- Open Access
- 18 June 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (23) , e73704
Rhodium‐Catalyzed Hydroformylation of Cyclic Alkenes Using Bisphenol‐A Derived Bisphosphine Ligands: Dicyclopentadiene as a Key Substrate
Rhodium‐catalyzed hydroformylation of dicyclopentadiene (DCPD) is an industrially attractive process to produce dialdehydes where developing cheap and highly selective catalysts remains an important subject. In this contribution, we analyzed the efficiency of easily accessible bisphosphine ligands based on readily available bisphenol‐A in Rh‐catalyzed hydroformylation of DCPD. Two bisphosphine ligands ( L1 and L2 ) and one monophosphine ligand ( L3 ) were prepared and applied as ligands in the Rh‐catalyzed hydroformylation of DCPD. By careful optimization of temperature, syngas pressure and reaction time, the catalyst Rh/ L1 demonstrated excellent activity and selectivity, achieving 100% substrate conversion, up to 405 Turnover Numbers (TONs) and 81% dialdehyde selectivity under mild operating conditions (30 bar syngas, 80°C). The optimized catalyst can also convert DCPD to useful dialdehyde at 5 grams scale and as well actively hydroformylate cyclopentene, cyclohexene and 2,3‐dihydrofuran to the corresponding useful aldehydes.
- 18 June 2026
- Published by Wiley in ChemistrySelect
- Vol. 11 (23) , e73704
Open AccessRhodium‐Catalyzed Hydroformylation of Cyclic Alkenes Using Bisphenol‐A Derived Bisphosphine Ligands: Dicyclopentadiene as a Key Substrate
Rhodium‐catalyzed hydroformylation of dicyclopentadiene (DCPD) is an industrially attractive process to produce dialdehydes where developing cheap and highly selective catalysts remains an important subject. In this contribution, we analyzed the efficiency of easily accessible bisphosphine ligands based on readily available bisphenol‐A in Rh‐catalyzed hydroformylation of DCPD. Two bisphosphine ligands ( L1 and L2 ) and one monophosphine ligand ( L3 ) were prepared and applied as ligands in the Rh‐catalyzed hydroformylation of DCPD. By careful optimization of temperature, syngas pressure and reaction time, the catalyst Rh/ L1 demonstrated excellent activity and selectivity, achieving 100% substrate conversion, up to 405 Turnover Numbers (TONs) and 81% dialdehyde selectivity under mild operating conditions (30 bar syngas, 80°C). The optimized catalyst can also convert DCPD to useful dialdehyde at 5 grams scale and as well actively hydroformylate cyclopentene, cyclohexene and 2,3‐dihydrofuran to the corresponding useful aldehydes.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
Hydrosoluble Pd(MesSO 3 )(TPPTS) catalyst for highly active and selective telomerization of 1,3-butadiene with methanol
Telomerization of 1,3-butadiene with methanol is efficiently catalyzed by in situ generated Pd(NHC)(TPPTS) system, providing 1-methoxy-2,7-octadiene (1-MOD) with 99.1% linear selectivity, 35 913 TON, and remarkable tolerance to water (up to 33% v/v).
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
Hydrosoluble Pd(MesSO 3 )(TPPTS) catalyst for highly active and selective telomerization of 1,3-butadiene with methanol
Telomerization of 1,3-butadiene with methanol is efficiently catalyzed by in situ generated Pd(NHC)(TPPTS) system, providing 1-methoxy-2,7-octadiene (1-MOD) with 99.1% linear selectivity, 35 913 TON, and remarkable tolerance to water (up to 33% v/v).
- 9 November 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (1) , 487-496
Enhancing Toughness and Flame Retardancy of Epoxy Thermosets Using SEBS ‐g‐ PEG / DOPO Blends
Enhancing the flame retardancy and toughness of epoxy thermosets without compromising glass transition temperature ( T g ) or mechanical strength is a critical challenge. In this study, the graft copolymer, SEBS‐g‐PEG was prepared by chemically grafting polyethylene glycol (PEG) to the terminal blocks of polystyrene‐block‐poly(ethylene‐ co ‐butylene)‐block‐polystyrene (SEBS). These block copolymers (BCPs) along with various loading levels of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) were covalently incorporated into the epoxy thermosets to enhance their properties. The resulting composites exhibited excellent matrix compatibility, achieving up to a 200% improvement in fracture toughness and a 70% increase in flame retardancy at higher DOPO loadings (e.g., 8 wt%) without plasticizing effects. Notably, T g and tensile strength were preserved, enabling balanced high‐performance composites.
- 9 November 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (1) , 487-496
Enhancing Toughness and Flame Retardancy of Epoxy Thermosets Using SEBS ‐g‐ PEG / DOPO Blends
Enhancing the flame retardancy and toughness of epoxy thermosets without compromising glass transition temperature ( T g ) or mechanical strength is a critical challenge. In this study, the graft copolymer, SEBS‐g‐PEG was prepared by chemically grafting polyethylene glycol (PEG) to the terminal blocks of polystyrene‐block‐poly(ethylene‐ co ‐butylene)‐block‐polystyrene (SEBS). These block copolymers (BCPs) along with various loading levels of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) were covalently incorporated into the epoxy thermosets to enhance their properties. The resulting composites exhibited excellent matrix compatibility, achieving up to a 200% improvement in fracture toughness and a 70% increase in flame retardancy at higher DOPO loadings (e.g., 8 wt%) without plasticizing effects. Notably, T g and tensile strength were preserved, enabling balanced high‐performance composites.