Thamires Dantas Guerra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Thamires Dantas Guerra has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- John Kennedy Guedes Rodrigues
Department of Civil Engineering, Federal University of Campina Grande, Campina Grande, Brazil
7 shared publications - Amanda Mendes Arruda
Universidade Federal de Campina Grande, Brasil
4 shared publications - Ana Letícia Feitosa de Macêdo4 shared publications
- Ana Maria Gonçalves Duarte4 shared publications
- Ana Maria Gonçalves Duarte Mendonça
Universidade Federal de Campina Grande
4 shared publications - Arthur Nóbrega de Sousa
Department of Civil Engineering, Federal University of Campina Grande, Campina Grande, Brazil
4 shared publications
Latest Publications
- Open Access
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19015
Characterization of marble powder waste and evaluation of its applicability in mortars
Natural stone materials used for ornamental and cladding purposes, defined by the Brazilian standard ABNT as naturally occurring rock substances processed for aesthetic applications, play a significant role in civil construction by contributing to both the durability and visual appeal of buildings. However, the processing of these stones produces waste that can lead to considerable environmental impacts. This study explores the potential reuse of waste generated during the cutting of marble slabs as a component in mortar formulations. Physical, chemical, and mineralogical characterizations of the waste were carried out, along with mechanical and physical testing of mortar specimens. The findings reveal that mortar incorporating 20% of marble residue as a fine aggregate replacement exhibited improved compressive strength compared to the control mix. Chemically, the residue resembles conventional raw materials, and its mineralogical profile is dominated by calcite and dolomite—common constituents of carbonate rocks. These results support the technical feasibility of incorporating marble cutting waste into masonry mortar, offering a sustainable strategy for waste valorization in the ornamental stone industry.
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19015
Open AccessCharacterization of marble powder waste and evaluation of its applicability in mortars
Natural stone materials used for ornamental and cladding purposes, defined by the Brazilian standard ABNT as naturally occurring rock substances processed for aesthetic applications, play a significant role in civil construction by contributing to both the durability and visual appeal of buildings. However, the processing of these stones produces waste that can lead to considerable environmental impacts. This study explores the potential reuse of waste generated during the cutting of marble slabs as a component in mortar formulations. Physical, chemical, and mineralogical characterizations of the waste were carried out, along with mechanical and physical testing of mortar specimens. The findings reveal that mortar incorporating 20% of marble residue as a fine aggregate replacement exhibited improved compressive strength compared to the control mix. Chemically, the residue resembles conventional raw materials, and its mineralogical profile is dominated by calcite and dolomite—common constituents of carbonate rocks. These results support the technical feasibility of incorporating marble cutting waste into masonry mortar, offering a sustainable strategy for waste valorization in the ornamental stone industry.
- Open Access
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19013
Use of waste tire rubber as a fine aggregate substitute in concrete
The civil construction sector significantly contributes to economic growth but also heavily exploits natural resources, raising sustainability concerns. This study investigates the incorporation of waste tire rubber as a partial substitute for fine aggregate in plain concrete to promote environmentally friendly construction practices. Concrete specimens were produced with 10% and 25% rubber content by mass replacing natural fine aggregate. Physical characterization of materials and mechanical testing, including compressive and splitting tensile strength, were conducted at curing ages of 7, 14, and 21 days. Results demonstrated a reduction in compressive and tensile strength proportional to the amount of rubber incorporated. Despite this decrease, the modified concrete meets the requirements for certain non-structural applications, offering advantages such as lower density and enhanced energy absorption. Water absorption increased with higher rubber content, attributed to rubber’s elastic nature and higher absorption capacity. The study confirms the viability of using tire rubber waste in concrete as a sustainable alternative to reduce environmental impact and promote circular economy practices in construction.
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19013
Open AccessUse of waste tire rubber as a fine aggregate substitute in concrete
The civil construction sector significantly contributes to economic growth but also heavily exploits natural resources, raising sustainability concerns. This study investigates the incorporation of waste tire rubber as a partial substitute for fine aggregate in plain concrete to promote environmentally friendly construction practices. Concrete specimens were produced with 10% and 25% rubber content by mass replacing natural fine aggregate. Physical characterization of materials and mechanical testing, including compressive and splitting tensile strength, were conducted at curing ages of 7, 14, and 21 days. Results demonstrated a reduction in compressive and tensile strength proportional to the amount of rubber incorporated. Despite this decrease, the modified concrete meets the requirements for certain non-structural applications, offering advantages such as lower density and enhanced energy absorption. Water absorption increased with higher rubber content, attributed to rubber’s elastic nature and higher absorption capacity. The study confirms the viability of using tire rubber waste in concrete as a sustainable alternative to reduce environmental impact and promote circular economy practices in construction.
- Open Access
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19014
Mechanical and microstructural assessment of concrete with fine aggregate partially replaced by tire rubber waste
The construction industry is one of the sectors that most intensively exploits natural resources during production; however, it is also one of the largest sectors in terms of waste reuse, offering high potential for sustainability. Concrete, as the most widely consumed material in the world, is responsible for providing stability, strength, and workability to structures. The study of incorporating waste materials into concrete is of great importance, as it enables reuse and reduces environmental impact. Among the most environmentally harmful industrial wastes is rubber derived from end-of-life tires. This study aimed to evaluate the performance of concrete incorporating tire rubber waste. Cylindrical specimens (10 cm × 20 cm) were molded with partial replacement of fine aggregate by 10% and 20% of rubber from end-of-life tires. Physical characterization tests were performed on the rubber waste, conventional aggregates, and cement, as well as physical and mechanical characterization of the concrete containing rubber waste, through axial compressive strength and splitting tensile strength tests. Although the incorporation of rubber waste led to a reduction in mechanical properties with increasing content, the results showed that for an adequate level of replacement, the use of rubberized concrete is feasible for various applications. Additionally, the inclusion of rubber waste imparted desirable properties to the concrete, such as energy absorption capacity and improved flexibility, thereby enhancing the overall performance of the mixture.
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19014
Open AccessMechanical and microstructural assessment of concrete with fine aggregate partially replaced by tire rubber waste
The construction industry is one of the sectors that most intensively exploits natural resources during production; however, it is also one of the largest sectors in terms of waste reuse, offering high potential for sustainability. Concrete, as the most widely consumed material in the world, is responsible for providing stability, strength, and workability to structures. The study of incorporating waste materials into concrete is of great importance, as it enables reuse and reduces environmental impact. Among the most environmentally harmful industrial wastes is rubber derived from end-of-life tires. This study aimed to evaluate the performance of concrete incorporating tire rubber waste. Cylindrical specimens (10 cm × 20 cm) were molded with partial replacement of fine aggregate by 10% and 20% of rubber from end-of-life tires. Physical characterization tests were performed on the rubber waste, conventional aggregates, and cement, as well as physical and mechanical characterization of the concrete containing rubber waste, through axial compressive strength and splitting tensile strength tests. Although the incorporation of rubber waste led to a reduction in mechanical properties with increasing content, the results showed that for an adequate level of replacement, the use of rubberized concrete is feasible for various applications. Additionally, the inclusion of rubber waste imparted desirable properties to the concrete, such as energy absorption capacity and improved flexibility, thereby enhancing the overall performance of the mixture.
- Open Access
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19011
Mechanical behavior evaluation of asphalt mixtures using alternative fillers: a literature review and comparative analysis
This study evaluates the mechanical performance of asphalt mixtures incorporating alternative fillers derived from industrial by-products and waste materials, aiming to promote sustainable pavement engineering. The asphalt layer in flexible pavements is critical for load distribution, water sealing, and surface durability. While traditional fillers like hydrated lime and Portland cement improve mixture properties, environmental concerns drive the search for sustainable alternatives. Through a comprehensive literature review, materials such as hydrated lime, bauxite residue (red mud), rice husk ash, fly ash, steel slag glass powder, and recycled concrete aggregate powder were analyzed based on mechanical tests including Tensile Strength by Diametral Compression (RT), Resilience Modulus (Mr), Modified Lottman, and fatigue testing. Findings reveal that all alternative fillers comply with DNIT-EM 367 (1997) standards and generally exhibit satisfactory or enhanced mechanical behavior compared to conventional fillers. Notably, bauxite residue significantly reduced permanent deformation, while rice husk ash and kaolin processing residues improved moisture resistance. Iron oxide increased stiffness but posed challenges related to mixture flexibility and stress response. The results underscore the potential of these industrial residues as cost-effective, environmentally friendly fillers that contribute to improved pavement performance while reducing reliance on natural resources and minimizing waste disposal impacts. Despite promising laboratory outcomes, further research is needed to establish standardized testing protocols and evaluate long-term field performance to fully validate the practical applicability of these alternative fillers in asphalt mixtures. This approach aligns with sustainable infrastructure development by integrating waste valorization into pavement materials technology.
- 1 August 2025
- Published by Brazilian Journals in Caderno Pedagógico
- Vol. 22 (10) , e19011
Open AccessMechanical behavior evaluation of asphalt mixtures using alternative fillers: a literature review and comparative analysis
This study evaluates the mechanical performance of asphalt mixtures incorporating alternative fillers derived from industrial by-products and waste materials, aiming to promote sustainable pavement engineering. The asphalt layer in flexible pavements is critical for load distribution, water sealing, and surface durability. While traditional fillers like hydrated lime and Portland cement improve mixture properties, environmental concerns drive the search for sustainable alternatives. Through a comprehensive literature review, materials such as hydrated lime, bauxite residue (red mud), rice husk ash, fly ash, steel slag glass powder, and recycled concrete aggregate powder were analyzed based on mechanical tests including Tensile Strength by Diametral Compression (RT), Resilience Modulus (Mr), Modified Lottman, and fatigue testing. Findings reveal that all alternative fillers comply with DNIT-EM 367 (1997) standards and generally exhibit satisfactory or enhanced mechanical behavior compared to conventional fillers. Notably, bauxite residue significantly reduced permanent deformation, while rice husk ash and kaolin processing residues improved moisture resistance. Iron oxide increased stiffness but posed challenges related to mixture flexibility and stress response. The results underscore the potential of these industrial residues as cost-effective, environmentally friendly fillers that contribute to improved pavement performance while reducing reliance on natural resources and minimizing waste disposal impacts. Despite promising laboratory outcomes, further research is needed to establish standardized testing protocols and evaluate long-term field performance to fully validate the practical applicability of these alternative fillers in asphalt mixtures. This approach aligns with sustainable infrastructure development by integrating waste valorization into pavement materials technology.
- Open Access
- 11 December 2023
- Published by Associacao Nacional de Pesquisa e Ensino em Transportes in Transportes
- Vol. 31 (3) , e2857
Efeitos da adição do óleo de canola nas propriedades mecânicas de misturas asfálticas
Nos últimos anos, diversas técnicas foram desenvolvidas com o intuito de reduzir as temperaturas de mistura e compactação das misturas asfálticas convencionais promovendo a redução das emissões de poluentes e do consumo energético, como o uso de aditivos químicos ou orgânicos. Assim, este estudo avaliou os efeitos da adição do óleo de canola no ligante asfáltico PG 64-XX e sua influência no desempenho mecânico de misturas asfálticas produzidas com esse ligante modificado nos teores de 1%, 2% e 3%. Realizou-se a caracterização mecânica por meio dos ensaios de resistência à tração, dano por umidade induzida, módulo de resiliência, módulo dinâmico, flow number e vida de fadiga. Dentre as principais conclusões, destaca-se uma diminuição máxima na temperatura de 5,2 °C para o teor de 3% de óleo de canola, mesmo que as misturas não pudessem ser classificadas como misturas asfálticas mornas. Entretanto, houve aumento da resistência à ação deletéria da água e economia de energia durante o aquecimento do ligante asfáltico e dos agregados no processo de produção.
- 11 December 2023
- Published by Associacao Nacional de Pesquisa e Ensino em Transportes in Transportes
- Vol. 31 (3) , e2857
Open AccessEfeitos da adição do óleo de canola nas propriedades mecânicas de misturas asfálticas
Nos últimos anos, diversas técnicas foram desenvolvidas com o intuito de reduzir as temperaturas de mistura e compactação das misturas asfálticas convencionais promovendo a redução das emissões de poluentes e do consumo energético, como o uso de aditivos químicos ou orgânicos. Assim, este estudo avaliou os efeitos da adição do óleo de canola no ligante asfáltico PG 64-XX e sua influência no desempenho mecânico de misturas asfálticas produzidas com esse ligante modificado nos teores de 1%, 2% e 3%. Realizou-se a caracterização mecânica por meio dos ensaios de resistência à tração, dano por umidade induzida, módulo de resiliência, módulo dinâmico, flow number e vida de fadiga. Dentre as principais conclusões, destaca-se uma diminuição máxima na temperatura de 5,2 °C para o teor de 3% de óleo de canola, mesmo que as misturas não pudessem ser classificadas como misturas asfálticas mornas. Entretanto, houve aumento da resistência à ação deletéria da água e economia de energia durante o aquecimento do ligante asfáltico e dos agregados no processo de produção.
- 28 April 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (3) , 1567-1583
Incorporation of Micronized Polyethylene Terephthalate in Structural Concrete Blocks
- 28 April 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (3) , 1567-1583
Incorporation of Micronized Polyethylene Terephthalate in Structural Concrete Blocks
- Open Access
- 2 October 2021
- Published by Research, Society and Development in Research, Society and Development
- Vol. 10 (13)
Effect of the incorporation of sugarcane bagasse fibers in asphalt mixture dosed by the Superpave method
Sugar industry waste bagasse contains many natural fiber materials, and the application of natural fibers in asphalt mixes such as SMA (Stone Matrix Asphalt) has become an attractive alternative for the construction of flexible pavements. This study aims to evaluate the mechanical performance of an asphalt mixture modified by incorporating 0.3% sugarcane bagasse fiber and with a size of 20 mm. The asphalt binder was submitted to penetration, softening point, and rotational viscosity tests to carry out this research, and the aggregates were characterized by specific mass, particle size, and absorption tests. Furthermore, the Superpave dosage was performed to produce the specimens to be evaluated in the splitting tensile strength test, resilient modulus, Marshall stability, and draindown sensitivity. As a result, the modified asphalt mixture presented a better performance in all evaluated strength tests and the leakage content within the standard specifications. Therefore, according to this, re-search, sugarcane bagasse fibers proved to be a viable alternative for SMA-type mixtures. Thus, the application of this material in asphalt paving and improving some essential characteristics can significantly reduce the environmental impacts generated by the inadequate disposal of these residues by sugar mills.
- 2 October 2021
- Published by Research, Society and Development in Research, Society and Development
- Vol. 10 (13)
Open AccessEffect of the incorporation of sugarcane bagasse fibers in asphalt mixture dosed by the Superpave method
Sugar industry waste bagasse contains many natural fiber materials, and the application of natural fibers in asphalt mixes such as SMA (Stone Matrix Asphalt) has become an attractive alternative for the construction of flexible pavements. This study aims to evaluate the mechanical performance of an asphalt mixture modified by incorporating 0.3% sugarcane bagasse fiber and with a size of 20 mm. The asphalt binder was submitted to penetration, softening point, and rotational viscosity tests to carry out this research, and the aggregates were characterized by specific mass, particle size, and absorption tests. Furthermore, the Superpave dosage was performed to produce the specimens to be evaluated in the splitting tensile strength test, resilient modulus, Marshall stability, and draindown sensitivity. As a result, the modified asphalt mixture presented a better performance in all evaluated strength tests and the leakage content within the standard specifications. Therefore, according to this, re-search, sugarcane bagasse fibers proved to be a viable alternative for SMA-type mixtures. Thus, the application of this material in asphalt paving and improving some essential characteristics can significantly reduce the environmental impacts generated by the inadequate disposal of these residues by sugar mills.
- 3 September 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 47 (4) , 4453-4462
Evaluation of Concrete with Addition of Micronized Polyethylene Terephthalate for Application as Interlocking Concrete Blocks
- 3 September 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 47 (4) , 4453-4462
Evaluation of Concrete with Addition of Micronized Polyethylene Terephthalate for Application as Interlocking Concrete Blocks
- Open Access
- 30 April 2021
- Published by Universidade Federal do Rio de Janeiro in Anuário do Instituto de Geociências
- Vol. 44
Estudo Comparativo do CBR “in situ” & LWD para Determinação da Capacidade de Suporte de Subleitos
O ensaio de California Bearing Ratio (CBR) “in situ” determina a capacidade de suporte das camadas dos pavimentos, entretanto este ensaio necessita de equipamentos pesados que dificultam a locomoção e instalação, tornando-o oneroso. O Light Weight Deflectometer (LWD) é um equipamento que possibilita a realização de ensaio não destrutivo realizado “in situ” que fornece o módulo de deformabilidade dinâmico do solo. A sua utilização na avaliação de camadas de pavimentos tem sido impulsionada devido à simplicidade de execução e portabilidade do equipamento. Portanto, este trabalho objetiva comparar os resultados do ensaio de CBR “in situ” e utilizando o LWD e desta maneira, validar uma alternativa mais econômica e rápida para obtenção do módulo de deformabilidade do solo “in situ”. A fase experimental desta pesquisa constituiu-se na escolha de quinze ruas não pavimentadas de Campina Grande com a realização dos ensaios “in situ” de LWD e CBR, caracterização dos solos em laboratório, análise das correlações e por fim estabelecer uma correlação para prever a capacidade de suporte de camadas do subleito “in situ” a partir da realização do ensaio LWD. Entre os resultados obtidos destaca-se que foi observada uma correlação com linha de tendência linear, entre o CBR “in situ” e o LWD de 79,18% para todas as amostras de solo. Quando limitou - se a amostra apenas para solos classificados como A-2-4 (HRB) e solos classificados como SM (SUCS) o coeficiente de correlação passa a ser de 78,67% e 83,42% respectivamente. Perante o exposto pode-se afirmar que a possibilidade de utilizar o LWD para determinação da capacidade de suporte de subleitos em campo é uma alternativa viável em substituição ao CBR “in situ”.
- 30 April 2021
- Published by Universidade Federal do Rio de Janeiro in Anuário do Instituto de Geociências
- Vol. 44
Open AccessEstudo Comparativo do CBR “in situ” & LWD para Determinação da Capacidade de Suporte de Subleitos
O ensaio de California Bearing Ratio (CBR) “in situ” determina a capacidade de suporte das camadas dos pavimentos, entretanto este ensaio necessita de equipamentos pesados que dificultam a locomoção e instalação, tornando-o oneroso. O Light Weight Deflectometer (LWD) é um equipamento que possibilita a realização de ensaio não destrutivo realizado “in situ” que fornece o módulo de deformabilidade dinâmico do solo. A sua utilização na avaliação de camadas de pavimentos tem sido impulsionada devido à simplicidade de execução e portabilidade do equipamento. Portanto, este trabalho objetiva comparar os resultados do ensaio de CBR “in situ” e utilizando o LWD e desta maneira, validar uma alternativa mais econômica e rápida para obtenção do módulo de deformabilidade do solo “in situ”. A fase experimental desta pesquisa constituiu-se na escolha de quinze ruas não pavimentadas de Campina Grande com a realização dos ensaios “in situ” de LWD e CBR, caracterização dos solos em laboratório, análise das correlações e por fim estabelecer uma correlação para prever a capacidade de suporte de camadas do subleito “in situ” a partir da realização do ensaio LWD. Entre os resultados obtidos destaca-se que foi observada uma correlação com linha de tendência linear, entre o CBR “in situ” e o LWD de 79,18% para todas as amostras de solo. Quando limitou - se a amostra apenas para solos classificados como A-2-4 (HRB) e solos classificados como SM (SUCS) o coeficiente de correlação passa a ser de 78,67% e 83,42% respectivamente. Perante o exposto pode-se afirmar que a possibilidade de utilizar o LWD para determinação da capacidade de suporte de subleitos em campo é uma alternativa viável em substituição ao CBR “in situ”.