Zihong Zhou
Research Subjects
Zihong Zhou has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Bing Yang
State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu, China
3 shared publications - Jiangrong Hou
School of Civil Engineering
3 shared publications - Haojiang Ding
China Railway Eryuan Engineering Group Co. Ltd
1 shared publication - Huailin Chen
School of Civil Engineering
1 shared publication - Jin-Cheng Gou
School of Civil Engineering, Southwest Jiaotong University, Chengdu, China
1 shared publication - Tao Yang
School of Civil Engineering, Southwest Jiaotong University, Chengdu, China
1 shared publication
Latest Publications
- 19 January 2023
- Published by Springer Nature in Journal of Mountain Science
- Vol. 20 (1) , 65-77
Influence of different soil properties on the failure behavior of deposit slope under earthquake after rainfall
- 19 January 2023
- Published by Springer Nature in Journal of Mountain Science
- Vol. 20 (1) , 65-77
Influence of different soil properties on the failure behavior of deposit slope under earthquake after rainfall
- Open Access
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Failure Characteristics and Mechanism of Multiface Slopes under Earthquake Load Based on PFC Method
Understanding the failure mechanism and failure modes of multiface slopes in the Wenchuan earthquake can provide a scientific guideline for the slope seismic design. In this paper, the two‐dimensional particle flow code (PFC2D) and shaking table tests are used to study the failure mechanism of multiface slopes. The results show that the failure modes of slopes with different moisture content are different under seismic loads. The failure modes of slopes with the moisture content of 5%, 8%, and 12% are shattering‐shallow slip, tension‐shear slip, and shattering‐collapse slip, respectively. The failure mechanism of slopes with different water content is different. In the initial stage of vibration, the slope with 5% moisture content produces tensile cracks on the upper surface of the slope; local shear slip occurs at the foot of the slope and develops rapidly; however, a tensile failure finally occurs. In the slope with 8% moisture content, local shear cracks first develop and then are connected into the slip plane, leading to the formation of the unstable slope. A fracture network first forms in the slope with 12% moisture content under the shear action; uneven dislocation then occurs in the slope during vibration; the whole instability failure finally occurs. In the case of low moisture content, the tensile crack plays a leading role in the failure of the slope. But the influence of shear failure becomes greater with the increase of the moisture content.
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Open AccessFailure Characteristics and Mechanism of Multiface Slopes under Earthquake Load Based on PFC Method
Understanding the failure mechanism and failure modes of multiface slopes in the Wenchuan earthquake can provide a scientific guideline for the slope seismic design. In this paper, the two‐dimensional particle flow code (PFC2D) and shaking table tests are used to study the failure mechanism of multiface slopes. The results show that the failure modes of slopes with different moisture content are different under seismic loads. The failure modes of slopes with the moisture content of 5%, 8%, and 12% are shattering‐shallow slip, tension‐shear slip, and shattering‐collapse slip, respectively. The failure mechanism of slopes with different water content is different. In the initial stage of vibration, the slope with 5% moisture content produces tensile cracks on the upper surface of the slope; local shear slip occurs at the foot of the slope and develops rapidly; however, a tensile failure finally occurs. In the slope with 8% moisture content, local shear cracks first develop and then are connected into the slip plane, leading to the formation of the unstable slope. A fracture network first forms in the slope with 12% moisture content under the shear action; uneven dislocation then occurs in the slope during vibration; the whole instability failure finally occurs. In the case of low moisture content, the tensile crack plays a leading role in the failure of the slope. But the influence of shear failure becomes greater with the increase of the moisture content.
- Open Access
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Dynamic Response and Failure Characteristics of Slope with Weak Interlayer under Action of Near‐Fault Ground Motion
Investigations into the Wenchuan earthquake (2008, China) demonstrated that landslides were concentrated in the near‐fault areas, and numerous large‐scale landslides occurred in slopes with weak interlayers. A mathematical model was established based on the shear beam theory, while a numerical model was developed based on the discrete element method which perfectly matched layer boundary theory. Through a theoretical analysis and numerical simulation, the dynamic response and failure modes of the slope with a weak interlayer under the near‐fault ground motion were studied. It was found that a combined effect took place between the near‐fault ground motion and the weak interlayer, causing the slope near a fault to be destroyed more easily. The coupling between the near‐fault ground motion and the weak interlayer leads to a maximum amplification effect of the slope. The existence of a weak interlayer induces nonconforming vibration between the upper and the lower rock masses of the interlayer. The variation in the amplification effect along the slope elevation is related to the ratio of the input seismic period to the natural slope period. Under horizontal ground motion, weak interlayers will be subjected to impacting and shearing action. The failure mode of the slope with a weak interlayer under near‐fault ground motion can be expressed as a trailing edge tension crack, as well as weak interlayer impacting and shearing failure.
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Open AccessDynamic Response and Failure Characteristics of Slope with Weak Interlayer under Action of Near‐Fault Ground Motion
Investigations into the Wenchuan earthquake (2008, China) demonstrated that landslides were concentrated in the near‐fault areas, and numerous large‐scale landslides occurred in slopes with weak interlayers. A mathematical model was established based on the shear beam theory, while a numerical model was developed based on the discrete element method which perfectly matched layer boundary theory. Through a theoretical analysis and numerical simulation, the dynamic response and failure modes of the slope with a weak interlayer under the near‐fault ground motion were studied. It was found that a combined effect took place between the near‐fault ground motion and the weak interlayer, causing the slope near a fault to be destroyed more easily. The coupling between the near‐fault ground motion and the weak interlayer leads to a maximum amplification effect of the slope. The existence of a weak interlayer induces nonconforming vibration between the upper and the lower rock masses of the interlayer. The variation in the amplification effect along the slope elevation is related to the ratio of the input seismic period to the natural slope period. Under horizontal ground motion, weak interlayers will be subjected to impacting and shearing action. The failure mode of the slope with a weak interlayer under near‐fault ground motion can be expressed as a trailing edge tension crack, as well as weak interlayer impacting and shearing failure.