Yue Ou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yue Ou has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Wenxin Liu
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China
9 shared publications - Longlong Yang
Chinese Academy of Sciences, Aerospace Information Research Institute, Beijing, China
7 shared publications - Zhengyuan Zhao
Chinese Academy of Sciences, Aerospace Information Research Institute, Beijing, China
6 shared publications Kedong Zhao
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China
4 shared publications- Yanyu Wei
University of Electronic Science and Technology of China
4 shared publications - Zhaochuan Zhang
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China
4 shared publications
Latest Publications
- 2 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (2) , 598-604
Development of G-Band Continuous-Wave Folded Waveguide Traveling-Wave Tube
A detailed development of a $G$ -band continuous-wave (CW) traveling-wave tube (TWT) with a 160-GHz $\cdot$ W product of bandwidth power is reported in the present work, in which the electron optics system (EOS), the tapered phase velocity folded waveguide (TPVFW) slow wave structure (SWS), the modified pill-box window (MPBW), and experimental results are described. The prototype of the proposed TWT is fabricated with optimized structural parameters obtained by particle-in-cell (PIC) simulations. Moreover, the experimental results show that TWT with 27-W output power at the frequency of 220 GHz at 100% duty cycle is obtained at the operation voltage of 17.1 kV and the current of 62 mA. The proposed $G$ -band TWT will have broad applications in far-distance high-resolution imaging and large communications capacity.
- 2 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (2) , 598-604
Development of G-Band Continuous-Wave Folded Waveguide Traveling-Wave Tube
A detailed development of a $G$ -band continuous-wave (CW) traveling-wave tube (TWT) with a 160-GHz $\cdot$ W product of bandwidth power is reported in the present work, in which the electron optics system (EOS), the tapered phase velocity folded waveguide (TPVFW) slow wave structure (SWS), the modified pill-box window (MPBW), and experimental results are described. The prototype of the proposed TWT is fabricated with optimized structural parameters obtained by particle-in-cell (PIC) simulations. Moreover, the experimental results show that TWT with 27-W output power at the frequency of 220 GHz at 100% duty cycle is obtained at the operation voltage of 17.1 kV and the current of 62 mA. The proposed $G$ -band TWT will have broad applications in far-distance high-resolution imaging and large communications capacity.
- 21 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (3) , 1359-1367
Rectangular Grating Slow-Wave Structure With a Slot Embed Electron Beam for High-Power Terahertz Radiation
To enhance the output power of 0.5-Terahertz (THz) backward wave oscillator (BWO), a grating loaded rectangular waveguide (GLRW) slow-wave structure (SWS) with a slot embed electron beam (SEEB) is proposed in present work. For the designs and optimizations of BWO GLRW SWS with SEEB, the dispersion equations are derived with a field matching method (FMM) and solved by a numerical method; the results show that the coupling impedances are remarkably enhanced. Moreover, the output performances are studied with a help of particle-in-cell (PIC) simulation, and the simulated results show that the BWO operation voltage is 25 kV and the current is 40 mA; the output power 18.9 W of the perfect electronic conductor SWS with SEEB is obtained, which is improved about 1.5 times. On the other hand, the time of start oscillation is decreased to 50%, which is compared with that the conventional SWS without slot. As for the THz vacuum electronic devices (VED), the amplitudes of output power are remarkably affected by the conductivity and roughness of SWS; therefore, the determinate factors are studied, and the PIC results show that the maximum power is about 5–7 W when the conductivity is 3– $5\times10$ 7 S/m. The proposed scheme affords a promising option for the developing of high-power THz source.
- 21 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (3) , 1359-1367
Rectangular Grating Slow-Wave Structure With a Slot Embed Electron Beam for High-Power Terahertz Radiation
To enhance the output power of 0.5-Terahertz (THz) backward wave oscillator (BWO), a grating loaded rectangular waveguide (GLRW) slow-wave structure (SWS) with a slot embed electron beam (SEEB) is proposed in present work. For the designs and optimizations of BWO GLRW SWS with SEEB, the dispersion equations are derived with a field matching method (FMM) and solved by a numerical method; the results show that the coupling impedances are remarkably enhanced. Moreover, the output performances are studied with a help of particle-in-cell (PIC) simulation, and the simulated results show that the BWO operation voltage is 25 kV and the current is 40 mA; the output power 18.9 W of the perfect electronic conductor SWS with SEEB is obtained, which is improved about 1.5 times. On the other hand, the time of start oscillation is decreased to 50%, which is compared with that the conventional SWS without slot. As for the THz vacuum electronic devices (VED), the amplitudes of output power are remarkably affected by the conductivity and roughness of SWS; therefore, the determinate factors are studied, and the PIC results show that the maximum power is about 5–7 W when the conductivity is 3– $5\times10$ 7 S/m. The proposed scheme affords a promising option for the developing of high-power THz source.
- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (1) , 169-177
An Efficiency-Enhanced 0.5-THz BWO Using Double-Slot Embedded Electron Beams to Drive a Grating Loaded Rectangular Waveguide
The backward wave oscillator (BWO) is one of the best choices for generating high-power radiation waves in the terahertz (THz) region. In order to improve the efficiency of beam–wave interaction and output power, a novel THz BWO scheme is proposed in this article, which uses double-slot embedded electron beams (DSEEB) to drive a grating loaded rectangular waveguide (GLRW) slow wave structure (SWS). The dispersion relation and the coupling impedance of the proposed SWS are derived by using an eigenfunction method (EFM) and solved with a numerical method. The results show that the upper limit frequency and the coupling impedances are remarkably improved, which are greater than those of traditional grating SWS. Based on this scheme, a BWO operating at the frequency of 0.5 THz is designed. The particle-in-cell simulations show that the output power reaches 8.86 W with an efficiency of 0.9%, which is 2.5 times the electronic efficiency of the conventional BWO. Thus, the proposed scheme provides a promising aim to develop the high-power THz source, which may be used in THz biomedical and material studies, and so on.
- 7 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (1) , 169-177
An Efficiency-Enhanced 0.5-THz BWO Using Double-Slot Embedded Electron Beams to Drive a Grating Loaded Rectangular Waveguide
The backward wave oscillator (BWO) is one of the best choices for generating high-power radiation waves in the terahertz (THz) region. In order to improve the efficiency of beam–wave interaction and output power, a novel THz BWO scheme is proposed in this article, which uses double-slot embedded electron beams (DSEEB) to drive a grating loaded rectangular waveguide (GLRW) slow wave structure (SWS). The dispersion relation and the coupling impedance of the proposed SWS are derived by using an eigenfunction method (EFM) and solved with a numerical method. The results show that the upper limit frequency and the coupling impedances are remarkably improved, which are greater than those of traditional grating SWS. Based on this scheme, a BWO operating at the frequency of 0.5 THz is designed. The particle-in-cell simulations show that the output power reaches 8.86 W with an efficiency of 0.9%, which is 2.5 times the electronic efficiency of the conventional BWO. Thus, the proposed scheme provides a promising aim to develop the high-power THz source, which may be used in THz biomedical and material studies, and so on.
- 15 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 49 (11) , 3410-3417
Design and Simulation of 10-GHz Bandwidth Phase-Velocity Tapers Folded Waveguide for 108-GHz Continuous-Wave Traveling-Wave Tube
Folded waveguide (FW) traveling-wave tubes (TWT) is a typical kind of vacuum electron device (VED) with some unique characteristics of high frequency, high power, and moderate bandwidth, which are widely used in radars, communication systems, electronic countermeasure, and so on. For the application to the demonstrations of ocean communication with the frequency of over 100 GHz and continuous-wave power with 15 W, an FWTWT operating at the frequency of 108 GHz and the CW power with 50 W is designed. The optimizations of dispersion characteristics and structural parameters of this FWTWT are optimized through a detailed theoretical analysis and a particle-in-cell (PIC) simulation, respectively. For the improvements of communication quality by the increase of output power, a novel method of phase-velocity tapered (PVT) FW slow wave structure (SWS) is used. Comparing with the conventional FWSWS, the output power with the proposed scheme is enhanced 1.5 times. Moreover, the effects of angle and kinetic spreads of electron beam velocity on output power are first investigated using PIC simulations. On the other hand, for obtaining the optimum signal transmission, a tapered and modified pill-box window is presented and used as the transmission structure, which is the characteristics of the broad bandwidth and low attenuation of transmission. With the help of optimized parameters, the CW FWTWT operates at the frequency of 108 GHz, and the maximum output power, gain, and bandwidth are obtained at 78.6 W, 31.9 dB, and 11 GHz, respectively. The optimum results are beneficial to the development of CW FWTWT.
- 15 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 49 (11) , 3410-3417
Design and Simulation of 10-GHz Bandwidth Phase-Velocity Tapers Folded Waveguide for 108-GHz Continuous-Wave Traveling-Wave Tube
Folded waveguide (FW) traveling-wave tubes (TWT) is a typical kind of vacuum electron device (VED) with some unique characteristics of high frequency, high power, and moderate bandwidth, which are widely used in radars, communication systems, electronic countermeasure, and so on. For the application to the demonstrations of ocean communication with the frequency of over 100 GHz and continuous-wave power with 15 W, an FWTWT operating at the frequency of 108 GHz and the CW power with 50 W is designed. The optimizations of dispersion characteristics and structural parameters of this FWTWT are optimized through a detailed theoretical analysis and a particle-in-cell (PIC) simulation, respectively. For the improvements of communication quality by the increase of output power, a novel method of phase-velocity tapered (PVT) FW slow wave structure (SWS) is used. Comparing with the conventional FWSWS, the output power with the proposed scheme is enhanced 1.5 times. Moreover, the effects of angle and kinetic spreads of electron beam velocity on output power are first investigated using PIC simulations. On the other hand, for obtaining the optimum signal transmission, a tapered and modified pill-box window is presented and used as the transmission structure, which is the characteristics of the broad bandwidth and low attenuation of transmission. With the help of optimized parameters, the CW FWTWT operates at the frequency of 108 GHz, and the maximum output power, gain, and bandwidth are obtained at 78.6 W, 31.9 dB, and 11 GHz, respectively. The optimum results are beneficial to the development of CW FWTWT.
- 2 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (1) , 307-314
Optimum Design of Electron Gun for 0.22-THz Traveling Wave Tubes
To improve the performance of a pencil beam electron gun for terahertz traveling wave tubes (TWT), a support vector regression (SVR) method combined with a goal attainment algorithm, which is used to optimize its structural parameters considering the periodic permanent magnetic (PPM) focusing system, is proposed in this article. Moreover, a parameter correction method to reduce the impact of the thermal expansion on the electron gun is proposed. An electron gun for 0.22-THz TWT gun is developed, in which a 30-mA/23.8-kV electron beam emitted by a curved barium–tungsten cathode with a beam loading of 4 A/cm 2 is achieved with the optimized parameters. To the high current density for THz beam–wave interaction, the area compression ratio of electron beam is used in beam tunnel and reaches 144. The experimental results are very similar to the simulation results, which indicate that the methods would be beneficial to the development of TWT.
- 2 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 70 (1) , 307-314
Optimum Design of Electron Gun for 0.22-THz Traveling Wave Tubes
To improve the performance of a pencil beam electron gun for terahertz traveling wave tubes (TWT), a support vector regression (SVR) method combined with a goal attainment algorithm, which is used to optimize its structural parameters considering the periodic permanent magnetic (PPM) focusing system, is proposed in this article. Moreover, a parameter correction method to reduce the impact of the thermal expansion on the electron gun is proposed. An electron gun for 0.22-THz TWT gun is developed, in which a 30-mA/23.8-kV electron beam emitted by a curved barium–tungsten cathode with a beam loading of 4 A/cm 2 is achieved with the optimized parameters. To the high current density for THz beam–wave interaction, the area compression ratio of electron beam is used in beam tunnel and reaches 144. The experimental results are very similar to the simulation results, which indicate that the methods would be beneficial to the development of TWT.
- 3 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (6) , 2996-3002
Design and Optimization of Axis-Adjustable Multistage Depressed Collector for 0.22-THz Traveling Wave Tubes
For the efficient optimization of a multistage depressed collector (MDC), an axis-adjustable MDC optimized using the genetic algorithm (GA) is presented in this article. The optimization processes are realized with a reasonable balance between the collector recovery efficiency and electron reflux rate by modifying the fitness function of GA. Through the proposed method, the best recovery efficiency 88.5% and 0.72% electron reflux rate of MDC are obtained, and a three-stage symmetric collector has been designed with the GA optimization and fabricated, for a 0.22-THz TWT. The experimental results are in well agreement with that of simulations, which indicates that the methods we propose would be beneficial to the design of high efficiency of TWT.
- 3 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (6) , 2996-3002
Design and Optimization of Axis-Adjustable Multistage Depressed Collector for 0.22-THz Traveling Wave Tubes
For the efficient optimization of a multistage depressed collector (MDC), an axis-adjustable MDC optimized using the genetic algorithm (GA) is presented in this article. The optimization processes are realized with a reasonable balance between the collector recovery efficiency and electron reflux rate by modifying the fitness function of GA. Through the proposed method, the best recovery efficiency 88.5% and 0.72% electron reflux rate of MDC are obtained, and a three-stage symmetric collector has been designed with the GA optimization and fabricated, for a 0.22-THz TWT. The experimental results are in well agreement with that of simulations, which indicates that the methods we propose would be beneficial to the design of high efficiency of TWT.
- 13 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Output Performances by Particle-In-Cell Simulations for 0.108THz Folded Waveguide Slow-wave Structures
In this paper, we modelled a sub-Terahertz at the frequency of 0.108THz folded waveguide traveling-tube (FWTWT) by utilizing a 3-D particle-in-cell (PIC) in CST STUDIO SUITE., and we investigated the beam and electromagnetic field of 108GHz slow-wave structures (SWS). The process of the interaction for SWS are presented, including working voltage, the structural parameters, working frequency. The radiation power and gain of the SWS at 108GHz is 42.32W and 26.26dB. The output of the SWS changes only 1.2dB across the 7Ghz bandwidth ranging from 103Ghz to 110GHz., which is useful in many fields, such as communications, electronic countermeasures, radar.
- 13 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Output Performances by Particle-In-Cell Simulations for 0.108THz Folded Waveguide Slow-wave Structures
In this paper, we modelled a sub-Terahertz at the frequency of 0.108THz folded waveguide traveling-tube (FWTWT) by utilizing a 3-D particle-in-cell (PIC) in CST STUDIO SUITE., and we investigated the beam and electromagnetic field of 108GHz slow-wave structures (SWS). The process of the interaction for SWS are presented, including working voltage, the structural parameters, working frequency. The radiation power and gain of the SWS at 108GHz is 42.32W and 26.26dB. The output of the SWS changes only 1.2dB across the 7Ghz bandwidth ranging from 103Ghz to 110GHz., which is useful in many fields, such as communications, electronic countermeasures, radar.
- 13 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Study on Beam Wave Interaction of Terahertz Radiation Source Based on Grating Structure
The vacuum electron device (VED) is one of the best devices to generate terahertz wave with its advantages of high power, high frequency and power synthesis. In order to obtain higher power terahertz wave, it is imperative to improve the output power and efficiency of VED. For this aim, we propose a novel THz rectangular grating slow wave structure (SWS). The SWS can make full use of the longitudinal electric field of the slot, so that the electromagnetic wave can interact with the electron beam efficiently, so as to improve the beam-wave interaction efficiency and output power. The field characteristics of the novel SWS are analyzed, and the “cold” dispersion equations are derived by the eigen-function method, and the dispersion characteristics and coupling impedance are calculated. The results show that the grating SWS with double holes embed sheet beams has higher working frequency and coupling impedance than the ordinary grating without any slot. These studies provide theoretical guidance for the design of the grating SWS with double holes embed sheet beams.
- 13 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Study on Beam Wave Interaction of Terahertz Radiation Source Based on Grating Structure
The vacuum electron device (VED) is one of the best devices to generate terahertz wave with its advantages of high power, high frequency and power synthesis. In order to obtain higher power terahertz wave, it is imperative to improve the output power and efficiency of VED. For this aim, we propose a novel THz rectangular grating slow wave structure (SWS). The SWS can make full use of the longitudinal electric field of the slot, so that the electromagnetic wave can interact with the electron beam efficiently, so as to improve the beam-wave interaction efficiency and output power. The field characteristics of the novel SWS are analyzed, and the “cold” dispersion equations are derived by the eigen-function method, and the dispersion characteristics and coupling impedance are calculated. The results show that the grating SWS with double holes embed sheet beams has higher working frequency and coupling impedance than the ordinary grating without any slot. These studies provide theoretical guidance for the design of the grating SWS with double holes embed sheet beams.
- 19 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 341-342
Thermal and Structural Analysis of Multi-stage Depressed Collector for G-band Traveling Wave Tubes
The Multi-stage depressed collector (MDC) is used as an essential efficiency enhancement technique in traveling-wave tubes (TWT). Two-third of the total power consumption of TWT is dissipated in the collector. In this paper, thermal and deformation analysis of MDC in G-band are implemented by using ANSYS. Temperature distribution of the MDC at given power supply are fully simulated, maximum deformations meanwhile in MDC at different ambient temperature are carefully compared with. The simulated prediction is in agreement with the experimental results.
- 19 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 341-342
Thermal and Structural Analysis of Multi-stage Depressed Collector for G-band Traveling Wave Tubes
The Multi-stage depressed collector (MDC) is used as an essential efficiency enhancement technique in traveling-wave tubes (TWT). Two-third of the total power consumption of TWT is dissipated in the collector. In this paper, thermal and deformation analysis of MDC in G-band are implemented by using ANSYS. Temperature distribution of the MDC at given power supply are fully simulated, maximum deformations meanwhile in MDC at different ambient temperature are carefully compared with. The simulated prediction is in agreement with the experimental results.