JFJoliana F. Farid

Joliana F. Farid

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joliana F. Farid has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Implementation of different separation techniques for resolving ternary mixture of Paracetamol, Pseudoephedrine Hydrochloride and Chlorpheniramine maleate with further quantification

    by Joliana F. Farid, Nadia M. Mostafa, Hebatallah M. Essam, Yasmin M. Fayez

    Due to the wide applicability of separation techniques that rely on the property of differential migration in pharmaceutical formulations analysis, different analytical strategies have been proposed to resolve mixtures of multi-components pharmaceuticals. Three separation methods were developed and validated for the simultaneous determination of Paracetamol (PAR), Pseudoephedrine HCl (PSE) and Chlorpheniramine maleate (CHP). The first method is a thin-layer chromatographic (TLC) separation, followed by densitometric measurement. The separation was carried out on aluminium sheet of silica gel 60 F254 using ethanol:chloroform:ammonia (1:7:0.4, by volume) as the mobile phase. Determination of PAR, PSE and CHP was successfully applied over the concentration ranges of 3–25 µg/band, 0.5–10 µg/band and 0.1–6 µg/band, respectively. The second method is HPLC separation that was achieved on C18 column using the mobile phase acetonitrile:phosphate buffer pH 5 (10:90, v/v) at a flow rate 1 mL min−1. PAR, PSE and CHP were determined by HPLC in concentration ranges of 5–400 μg mL−1, 2–40 μg mL−1 and 0.5–16 μg mL−1, respectively. The third method is a capillary electrophoresis (CE) separation. The electrophoretic separation was achieved using 20 mM phosphate buffer (pH 6.5) at 20 kV. The linearity was reached over concentration ranges of 30–250 μg mL−1, 5–50 μg mL−1 and 0.8–20 μg mL−1 for PAR, PSE and CHP, respectively. The developed methods were validated with respect to linearity, precision, accuracy and system suitability. The proposed methods were successfully applied for bulk powder and dosage form analysis with RSD of precision 254 using ethanol:chloroform:ammonia (1:7:0.4, by volume) as the mobile phase. Determination of PAR, PSE and CHP was successfully applied over the concentration ranges of 3–25 µg/band, 0.5–10 µg/band and 0.1–6 µg/band, respectively. The second method is HPLC separation that was achieved on C18 column using the mobile phase acetonitrile:phosphate buffer pH 5 (10:90, v/v) at a flow rate 1 mL min−1. PAR, PSE and CHP were determined by HPLC in concentration ranges of 5–400 μg mL−1, 2–40 μg mL−1 and 0.5–16 μg mL−1, respectively. The third method is a capillary electrophoresis (CE) separation. The electrophoretic separation was achieved using 20 mM phosphate buffer (pH 6.5) at 20 kV. The linearity was reached over concentration ranges of 30–250 μg mL−1, 5–50 μg mL−1 and 0.8–20 μg mL−1 for PAR, PSE and CHP, respectively. The developed methods were validated with respect to linearity, precision, accuracy and system suitability. The proposed methods were successfully applied for bulk powder and dosage form analysis with RSD of precision <2%. Moreover, statistical comparison with the official methods confirms the methods' validity.


  • Systemic Optimization and Validation of Normal and Reversed-Phase Eco-Friendly Chromatographic Methods for Simultaneous Determination of Paracetamol and Phenylephrine Hydrochloride in the Presence of Paracetamol Impurities

    by Joliana F Farid, Nadia M Mostafa, Yasmin M Fayez, Hebatallah M Essam

    Background: Chromatographic behavior of different substances in normal and reversed phases is an interesting area in the scientific community. Objective: The work aimed to optimize and validate chromatographic separation methods for simultaneous determination of paracetamol (PAR) and phenylephrine HCl (PHE) in the presence of PAR impurities, namely p-aminophenol, p-nitrophenol, acetanilide, and p-chloroacetanilide with further quantification of these toxic impurities. Methods: TLC method based on normal phase separation was carried out on aluminum sheets of silica gel 60 F254 using ethanol:chloroform:ammonia as a developing system, followed by densitometric measurements. While HPLC is based on reversed phase separation using a C18 column against acetonitrile:phosphate buffer pH 5 as a mobile phase. Results: PAR and PHE were determined by the TLC-densitometric method in concentration ranges of 3–25 and 0.1–3 µg/band, respectively, and determined by the HPLC method over concentration ranges of 5–400 and 2–80 µg/mL, respectively. Both methods were optimized and validated. Furthermore, they were successfully applied for pharmaceutical formulations with precision <2%. Moreover, results of a statistical comparison with the official methods confirm the methods’ validity claims. Conclusion: Two eco-friendly chromatographic methods were developed to determine PAR and PHE in their binary mixtures, pharmaceutical formulations, and in the presence of PAR-related impurities with further quantification of these toxic impurities. Highlights: These simple chromatographic methods are the first methods developed for simultaneous determination of PAR and PHE in the presence of PAR-related impurities.


  • Open Access

    Capillary zone electrophoresis as a quality assessment tool of paracetamol and phenylephrine hydrochloride in presence of paracetamol impurities

    by Joliana F. Farid, Nadia M. Mostafa, Yasmin M. Fayez, Hebatallah M. Essam

    The combination of paracetamol (PAR) and phenylephrine HCl (PHE) is a common pharmaceutical combination intended to manage symptoms of every day cold. Since paracetamol is susceptible to degradation or some manufacturing-related impurities, its stability should be monitored continuously. The developed method in this study for the determination of PAR and PHE in presence of PAR impurities is considered a quality assessment tool especially when PAR impurities can be quantitatively determined. A capillary zone electrophoresis (CZE) method was optimized and validated for simultaneous determination of PAR and PHE in presence of PAR impurities namely, p-Aminophenol (PAP), p-Nitrophenol (PNP), Acetanilide (ACT) and p-Chloroacetanilide (CAC) with further quantification of these toxic impurities. Factors that affect the separation quality such as pH, buffer and applied voltage were optimized. The separation was carried out using 20 mM phosphate buffer (pH 8). The linearity was reached over concentration ranges of 30–250 μg/mL, 1–40 μg/mL, 2–50 μg/mL, 2–50 μg/mL, 2–50 μg/mL and 2–50 μg/mL for PAR, PHE, PAP, PNP, ACT, and CAC, respectively, with accuracy ranging from 99.06% to 100.62%. After validation, the method was applied for pharmaceutical formulation analysis with RSD <2%. Moreover, statistical comparison with the official methods confirms that the method is a viable alternative for quality assessment of this combination.


  • Stability Indicating Spectrophotometric Methods for Determination of Ivabradine Hydrochloride in the Presence of Its Degradation Product

    by Nadia M. Mostafa, Yasmin M. Fayez, Joliana F. Farid, Abd El-Aziz B. Abd El-Alim

    Five simple, specific, accurate and precise stability indicating spectrophotometric methods have been developed for determination of Ivabradine HCl (Iva) in the presence of its acid degradate, in bulk powder and in pharmaceutical formulations. Forced degradation was performed using 2N HCl. The degradation product was identified by infrared spectroscopy and mass spectrometry, and the pathway of degradation was illustrated. The first method is a second derivative (D2) spectrophotometric method, which allows the determination of Iva in presence of its degradate at 290 nm. The second method is the first derivative of the ratio spectra (1DD) by measuring the peak amplitude at 294 nm. The third method is the ratio difference (RD) method which depends on measuring the difference between the amplitudes of the ratio spectra at 249 nm and 298 nm. The fourth method is the constant center (CC) method where the original spectra of Iva were obtained. The fifth method is mean centering of ratio spectra (MCR). The proposed methods were validated according to ICH guidelines. The obtained results were statistically compared with those of a reported HPLC method. The comparison showed that there is no significant difference between the proposed methods and the reported method regarding both accuracy and precision.